Next Level Racing Motion Platform V3

Next Level Racing GTTrack Cockpit

The GTtrack is the ultimate cockpit for serious sim racers looking for rigidity, complete adjustability and a true race car seating position. The GTtrack was designed with the close feedback of professional drivers and some of the world's fastest eSports drivers to give you every feature required for serious sim racing. The complete rigidity of the GTtrack allows it to support direct drive wheels and professional pedal sets as weil as being compatible with all major wheel and pedals including Thrustmaster®, Logitech® and Fanatec®.

Features:

• Steering wheel angle and distance adjustability. Pedal angle and distance adjustbility
• Gear shifter distance adjustable
• Pre-drilled for all major brands including Thrustmaster®, Logitech® and Fanatec®
• Built with rigidity to support direct drive wheels and professional pedal sets
• Built with motion in mind - The Next Level Racing® Motion Platform V3 bolts straight on in less than 10 minutes and fully compatible with the Next Level Racing® Traction+ Motion Platform
• lncluded handbrake support for both Thrustmaster® and Fanatec® handbrakes
• Buttkicker Gamer 2 Adapter
• Height adjustable rubber feet and Next Level Racing® Lockable Wheel Gastors
• Box dimensions 100 x 61 x 59 cm - 60 kg

Force2Motion 4 DOF ProSimu Kit 100mm with F2M adapter system for NLR Traction Plus - Size X (1060mm width)

• ProSimu actuator set with 4x 100 mm stroke and control unit and Simtools software
• Force2Motion adapter system ("The Beast") to copy the ProSimu actuators with the Fanatec Clupsport V2 Cockpit (or similar) and Traction Plus system
• F2M Baseplate X for Fanatec Cockpit (Fanatec Cickpit not included)

Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!
Observe maximum weights: The Next Level Racing Traction Plus System has a maximum payload of 235 kg. The Next Level Racing Motion Platform V3 allows a max. payload of 130 kg (incl. seat and seat-mounted accessories). Therefore, make sure that you do not exceed both values. The total weight of the cockpit depends on the accessories (controls) you have mounted and the driver's weight. Depending on the configuration, we recommend not exceeding the driver's face of 100 kg.
 

Force2Motion Adapter-System Dynamic for NLR Traction Plus (Add-On) - Size L (980 mm width)

• Force2Motion adapter system Dynamic for mounting of cockpits (third party manufacturers, self-made) on the Next Level Racing Traction Plus system
• This is an expansion set for the static Force2Motion-Adapter to upgrade it to a complete adapter system
• Without actuators and Traction Plus System!

With the static adapter it is possible to mount different cockpits on the Traction Plus System. The adapter is based on the Force2Motion adapter system "The Beast" and can be extended by purchasing the 4 DOF actuator set to get additional 4 DOF and move the whole cockpit.

Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!
 

Force2Motion 8DOF - Motion-Simulator - "The Beast - Fanatec Edition" (Seat-Mover and Cockpit-Mover)
 
The ultimate combination of Seat-Mover and Full-Motion-Cockpit with Traction Loss

Attention: This is a bundle, which only consists of Cockpit and the required motion systems incl. adapter. You need an additional PC, monitor(s), pedals etc. There is a Built-To-Order article in the shop, which contains all possible options you can add or remove.
 
Our innovative Force2Motion 8DOF cockpit, exclusively manufactured in this combination, combines the Fanatec Clupsport V2 Cockpit with Motion Platform V3 (Seat Mover) and the Traction Plus system (for oversteer and understeer effects) from Next Level Racing with the Cockpit Mover based on the ProSimu T1000 4M. As the "cream on top", a butt kicker is mounted, which transfers the vibrations from the engine, speed limiter and curb effects tactilely into the seat and thus onto the driver's body.
 
This turns the system into the ultimate racing and/or flying cockpit with 8 DOF. This product idea arose from the idea of putting together a complete cockpit with all conceivable options for our showroom in order to show our customers the respective effects of the individual motion systems on one system. After we had gained sufficient experience with the prototype, we completely redesigned the adapter system for combining the two worlds and had it manufactured in Germany. The adapter system is so modular that it is 100% compatible with the Next Level Racing Traction Plus system and can therefore be installed as an add-on between the Fanatec Clupsport V2 Cockpitt and Traction Plus. The adapter system can also be used to mount other cockpits on the Next Level Racing Traction Plus system.
 
The Beast: All-In-On for testing in our showroom (see here the NLR-Version)

Fast Facts:

• Fanatec Clupsport V2 Cockpit with 4DOF plus Next Level Racing Motion Platform (Seat-Mover) with 2 DOF and Traction Plus (2 DOF)
• 8 actuators plus Buttkicker
• Fanatec Clupsport V2 Cockpit cockpit with seat adjustment and Force2Motion-Adaptersystem
• Racing seat
• Safety belts
• Force2Motion adapter systems Size X
• All necessary electronics, cables and screws including cables (power supply, signal converter USB)
• Plastic housing and steel/alu frame
• Very resistant paint (colour powder heated to 200 ° C on the structure)
• Made of square/round tubes, ultra-precise laser cutting, allows maximum rigidity.
• Compatible with many accessories and devices: Thrustmaster, Fanatec etc. (not included)
• Power supply: Standard Schuko plug 110-240V - Power consumption approx. 500 Watt
• Space requirements (footprint): length approx. 200 cm x width 120 cm (+ space for entry) x height 170 cm (upper edge of seat) - available width between actuators: 64 cm (max. cockpit width)
• Weight (without cockpit, motion platforms and controls):
  • Static adapter incl. actuator holder and screws: 9.2 kg
  • Dynamic adapter incl. screws (without actuators): 8.5 kg
  • Actuators per piece: 8,3 kg
  • Adapter plate (optional): 6.8 kg
  • The recommended driver weight is 80-100 kg (depending on the equipment of the overall cockpit - official payload of the Traction Plus System is 235 kg)
• Supported Games: Details see Simtools and Platform-Manager
  • Software is constantly updated as new games are released; Not every software title is equally well supported by every motion system.

Windows - PC required ! No support for Playstation, Xbox and other consoles! - Software (Simtools) included!
 
For details of the Next Level Motion platform see the corresponding article description
 
Attention: This is not a toy and not a ready assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen spanner, open-end spanner set and socket spanner 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!
Observe maximum weights: The Next Level Racing Traction Plus System has a maximum payload of 235 kg. The Next Level Racing Motion Platform V3 allows a max. payload of 130 kg (incl. seat and seat-mounted accessories). Therefore, make sure that you do not exceed both values. The total weight of the cockpit depends on the accessories (controls) you have mounted and the driver's weight. Depending on the configuration, we recommend not exceeding the driver's face of 100 kg.
 
The set is explicitly ordered and preconfigured for you. Therefore we cannot grant you the right of withdrawl to this article. Please consult us before buying! The pictures partly show the prototype with optional accessories.
 
Attention: This Built-To-Order contains the following features. Certain items (such as the GTTrack cockpit, the actuators and the F2M adapter set must not be removed in order not to lose the price advantage of the bundle price! So please pay attention to the price development in the shopping cart!

• Fanatec Clupsport V2 Cockpit
• Next Level Motion Platform V3
• Next Level Traction Plus System
• Force2Motion ProSimu 4 DOF System with Force2Motion-Adapter-System Size X
• 2x Next Level Racing floor mat (Note: When using the Next Level Traction Plus System, you will need two mats!)
• Buttkicker incl. control unit and external USB sound card
• Force2Motion cable management

You can find more articles and options in the Ready2Race/Ready-To-Race single products section.


Assembly time: The complete assembly of the beast takes 2-3 days if you know what you are doing and read and understand the manual. If you don't feel like reading our manual (please download and read under "Documents" before buying) and the manuals for the individual products, have two left hands or are simply too impatient, then please use our assembly service (conditions on request) or leave the kit alone! This prevents frustration on both sides ;-) !

F2M Adapter Set V3 Motion Platform for Aluminium Cockpits

With the F2M-Adapter Motion Platform V3 for aluminium cockpits it is possible to mount the Next Level Racing Motion Platform V3 in an aluminium cockpit e.g. of Trak Racer type 80 and 160. With the 160 cockpit (160mm overall height), the longitudinal profiles of the seat mount are omitted. With the 80 cockpit these are used (to obtain the necessary height / airspace for the V3). With the 160 cockpit the seat position increases by approx. 2 cm compared to the original seat, with the 80 cockpit by approx. 10 cm. For an inside width in the aluminium cockpit of 500mm.

The set consists of two aluminium brackets in black fine structure powder-coated for the V3 with 4 clamping screws. The inside of the bracket is equipped with a sliding strip so that the surface of the aluminium profiles is protected when the V3 is moved longitudinally.

Attention: When installing, make sure that there is sufficient air space for the fans of the V3 (approx. 2 cm distance to the floor and rear wall) and that the seat and, if applicable, a mounted butt-kicker can move freely without bumping into fixed parts or producing a crushing hazard for the hands. If a static shifter mount is used in the seat's movement area, it must be shortened so that the seat can move freely in all directions (this can be supplied by Force2Motion on request - see corresponding article).

Please Note: Cockpit and V3 not included.

Force2Motion Seatframe

The F2M seatframe replicates the substructure of the original Next Level GT Track seat or cockpit and extends its function by the possibility of mounting a joystick for a flight cockpit in the centre position in front of the seat (between the pilot's legs). The centrestick can be mounted statically. Depending on how far forward the centrestick is to be positioned, the round mounting plate can be moved forward or back through various drill holes in the range of 0-40mm. The compatibility to the NLR Flightpack is maintained and creates the mounting possibility universally also for other cockpit/seat combinations. A Buttkicker Gamer2 (or similar) can be mounted to the F2M Buttkicker Holder in such a way that it can transfer the effects directly to the seat and move freely in virtually any cockpit (when using the NLR Motion Platform V3) without bumping into fixed cockpit parts.
 
It is essential to ensure that there is sufficient room for the seat to move with the seat frame in the cockpit (do not use in the Fanatec cockpit!).

 

Next Level Racing® F-GT Elite Formula and GT Aluminium Profile Simulator Cockpit iRacing Edition
 
Fast Facts:

1. All in one cockpit with quick adjustments for all driving positions including true formula, GT, Hybrid, Truck, and Tank
2. Free 12 months iRacing® subscription for new users (110 USD Value)
3. Rigid and highly adjustable mounting support included for your seat, wheel, pedals, shifter, handbrake
4. Post anodized custom carbon grey (scratch resistant) aluminium profile with premium carbon steel powder coated components
5. Pedal position height, angle and distance adjustable
6. Pre-machined holes in aluminium profile for rigidity and ease of assembly
7. Compatible and easy installation with Next Level Racing® Motion Platforms
8. All the extra’s included such as NLR seat slider system, seat brackets, height adjustable shock absorption feet, gear shifter & handbrake support plate, foot step, Buttkicker® Gamer 2 adaptor, cable management clips, Motion Platform V3 adaptors, ratchet tool & more
9. Premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
10. T-slot extruded aluminium allows compatibility of accessories with other cockpit brands
11. Fully enclosed base frame for strength and aesthetics
12. Taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
13. Compatible with all major brands of electronics for major brands of wheels, pedals and shifters including Fanatec, Thrustmaster, Logitech, Simxperience and many more

Please note: For direct drive wheel users such as Fanatec® DD/ Simucube®/ Simagic® Next Level Racing recommends the Next Level Racing® F-GT Elite Front and Side Mount edition or the separetly available adaptor for an optimal racing experience.

Next Level Racing Race-Seat ES1

Fast Facts:

1. Ergonomically designed and engineered specifically for sim racing
2. Compatible with all side mounting seat brackets
3. Five-axis Rotationally molded polymer seat for ultimate tensile strength
4. PU molded Foam with premium suede finish
5. Next Level Racing seat belts included for increased immersion and motion users
6. Comfortably fit users up to 42” waist and built rigid to support up to 250 kg users

About:
 
The Next Level Racing® Elite ES1 seat is designed and developed for the most demanding sim racer using both virtual and real motorsport industry feedback. Manufactured using a five-axis roto-molded process to provide optimal support and rigidity at every mounting position. Drivers will enjoy the high-quality PU molded foam suede cushions over countless hours of racing. The Elite ES1 is a versatile solution for every type of sim racer.
 

Next Level Racing® F-GT Elite Formula & GT Aluminium Profile Simulator Cockpit - Wheel Plate Edition

Key Features:

1. All in one cockpit with quick adjustments for all driving positions including true formula, GT, hybrid, truck, and tank
2. Rigid and highly adjustable mounting support included for your seat, wheel, pedals, shifter, handbrake
3. Post anodized custom carbon grey (scratch resistant) aluminium profile with premium carbon steel powder coated components
4. Pedal position height, angle and distance adjustable
5. Pre-machined holes in aluminium profile for rigidity and ease of assembly
6. Compatible and easy installation with Next Level Racing® Motion Platforms
7. All the extra’s included such as NLR seat slider system, seat brackets, height adjustable shock absorption feet, gear shifter & handbrake support plate, foot step, Buttkicker® gamer 2 adaptor, cable management clips, Motion Platform V3 adaptors, ratchet tool & more
8. Premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
9. T-slot extruded aluminium allows compatibility of accessories with other cockpit brands
10. Fully enclosed base frame for strength and aesthetics
11. Taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
12. Compatible with all major brands of electronics for major brands of wheels, pedals and shifters including Fanatec, Thrustmaster, Logitech, Simxperience and many more

Please note: For direct drive wheel users such as Fanatec® DD/ Simucube®/ Simagic® Next Level Racing recommends the Next Level Racing® F-GT Elite Front and Side Mount Edition for an optimal racing experience

Next Level Racing® F-GT Elite Formula & GT Aluminium Profile Simulator Cockpit - Side and Front Mount Edition

Fast Facts:

1. All in one cockpit with quick adjustments for all driving positions including true formula, GT, Hybrid, Truck, and Tank
2. Zero-flex Front & Side Mount with 70 degrees of adjustability for Direct Drive wheelbases
3. Rigid and highly adjustable mounting support included for your seat, wheel, pedals, shifter, handbrake
4. Post anodized custom carbon grey (scratch resistant) aluminium profile with premium carbon steel powder coated components
5. Pedal position height, angle and distance adjustable
6. Pre-machined holes in aluminium profile for rigidity and ease of assembly
7. Compatible and easy installation with Next Level Racing® Motion Platforms
8. All the extra’s included such as NLR seat slider system, seat brackets, height adjustable shock absorption feet, gear shifter & handbrake support plate, foot step, Buttkicker® Gamer 2 adaptor, cable management clips, Motion Platform V3 adaptors, ratchet tool & more
9. Premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
10. T-slot extruded aluminium allows compatibility of accessories with other cockpit brands
11. Fully enclosed base frame for strength and aesthetics
12. Taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
13. Compatible with all major brands of electronics for wheels, pedals and shifters including Fanatec, Simxperience and many more

Please note: For non-direct drive, bottom mounting wheel users such as Fanatec® Clubsport/ Thrustmaster® Next Level Racing® recommends the Next Level Racing® F-GT Elite Wheel Plate Edition Cockpit

Next Level Racing Motion Platform V3 KIT (Seat-Mover) - Details see options

Delivery time: The product is currently not available due to delivery problems with essential components. The next production batch has been announced for June 2024. It is strongly recommended to pre-order devices now, as it is expected that stocks will be sold in a very short time if available. In this case, we will accept an order without immediate payment (please select prepayment and specify "Payment on availability" in the order notes). As soon as the devices are available again, customers who have placed a pre-order will receive a corresponding message with a request for payment (incl. PayPal link). The pre-order only becomes binding once payment has been made.

With this article, an adapter kit for various cockpits can be optionally ordered at a preferential price. An SDK can also be added.

WEEE-Reg.-Nr. DE 11344112

• Next Level Racing® V3 Motion Platform
• Next Level Racing® Platform Manager Software (Download)
• USB cable
• Power cable
• Steel side panels to directly bolt on to your Next Level Racing® GTultimate Cockpit, Next Level Flight Simulator or retrofit to your existing cockpit
• Manual (english)

Force2Motion RaceRoom 30x Adapter for Next Level Racing Motion Platform V3

What’s Included:

• Force2Motion adapter for installing the Motion Platform in the RaceRoom cockpits (RaceRoom cockpit not included, but optionally available)
• Force2Motion Seat-Adapter 345mm
• Next Level Racing® Platform Manager Software (Download)
• USB cable
• Power cable
• Manual (english)

Please note. Next Level Racing® V3 Motion Platform not inluded.
When using the Next Level Racing Motion Platform, we strongly recommend using the RaceRoom Stiffener Kits and the RaceRoom Seat Adjustment.

The kit is compatible with the RaceRoom RR3055 and RR3033 (for the cockpits  RR4055 and RR4027 see separate article). However, RaceRoom's 5.1 sound system cannot be used without modification, as the installation space for the subwoofer under the seat is used for the motion platform! The subwoofer must be placed manually outside the cockpit!

Force2Motion 8DOF - Motion-Simulator - Built-to-Order "The Beast"

Important note: The product is no longer available in this form due to product discontinuation by the manufacturer. We are working on a replacement...
 
The ultimate combination of Seat-Mover and Full-Motion-Cockpit with Traction Loss

Attention: Do not be put off by the price shown! This bundle contains all possible options and combinations you can choose from. The actual price will be significantly lower after your selection in the shopping cart!
 
Our innovative Force2Motion 8DOF cockpit, exclusively manufactured in this combination, combines the GTTrack cockpit with Motion Platform V3 (Seat Mover) and the Traction Plus system (for oversteer and understeer effects) from Next Level Racing with the Cockpit Mover based on the ProSimu T1000 4M. As the "cream on top", a butt kicker is mounted, which transfers the vibrations from the engine, speed limiter and curb effects tactilely into the seat and thus onto the driver's body.
 
This turns the system into the ultimate racing and/or flying cockpit with 8 DOF. This product idea arose from the idea of putting together a complete cockpit with all conceivable options for our showroom in order to show our customers the respective effects of the individual motion systems on one system. After we had gained sufficient experience with the prototype, we completely redesigned the adapter system for combining the two worlds and had it manufactured in Germany. The adapter system is so modular that it is 100% compatible with the Next Level Racing Traction Plus system and can therefore be installed as an add-on between the GTTrack cockpit and Traction Plus. The adapter system can also be used to mount other cockpits than the GTTrack on the Next Level Racing Traction Plus system. For example, there is already an aluminium plate pre-drilled for RSeat RS1 and S1 cockpits, which can of course also be used for other cockpits and do-it-yourself projects by drilling appropriate holes.
 
Fast Facts:

• Cockpit with 4DOF plus Next Level Racing Motion Platform (Seat-Mover) with 2 DOF and Traction Plus (2 DOF)
• Up to 8 actuators plus Buttkicker
• NLR GTTrack cockpit with seat adjustment
• Racing seat (standard NLR - optional at extra charge ProSimu racing shell rigid)
• Safety belts
• Option: Force2Motion adapter systems (optionally with or without mounting plate for third-party cockpits)

Force2Motion GTTrack Pedallifter

After installing the Next Level Motion Platform V3 in the GTTrack cockpit, the pedal plate may be too low in relation to the seat height for some people. We have the solution for this: With the Force2Motion GTTrack Pedallifter the pedal plate is raised by 80mm. This completely compensates for the higher seat position. The pedal lifter is made of solid aluminium and is powder coated in matt black. Plastic end caps provide a clean look. Longer screws are included.
 

Force2Motion seat adapter 345mm for Next Level Motion Platform V3 - For mounting race seats on the Next Level Racing Motion Platform V3

Suitable for common racing seats with 345mm hole spacing sideways and 270mm, 273mm and 320mm longitudinal spacing (e.g., Sparco R100, Sparco Pro 2000 Floormount, OMP, RaceRoom, etc.). The seat adapter is mounted between seat or seat rail (for longitudinal adjustment) and Next Level Racing Motion Platform V3 and converts to the lateral hole spacing of 355 mm of the Motion Platform. The adjustment of the seat adjustment thus remains fully intact. By the way: The seat adapter is already included in the Next Level Motion V3 RaceRoom Edition bundle!

Dimensions: 40mm x 30mm x 4mm x 340mm aluminum black powder coated; incl. 4 pcs. M8 countersunk head screws including stop nuts and assembly instructions.

Supplied without seat and seat adjustment slider!

RSeat S1 - Adapter Kit for Next Level Racing Motion Platform V3

Force2Motion adapter set for the installation of the Motion Platform in the RSeat S1 cockpit incl. lifter for wheel and pedal plate as well as for a shifter extension; With the Force2Motion adapters not only the Next Level Motion Platform is inserted into the S1 cockpit, but also the geometry of the seating position is adapted to the 8-10 cm higher seat surface. For this purpose, both the wheel mount and the shifter mount (analog flight mount) are raised by about 8-10 cm. The pedal plate is lifted by 4 cm. This virtually eliminates the higher seat height due to the Motion Platform mounted between the RSeat chassis and seat. The add-on parts are black anodized and of high quality. This means that neither the appearance nor the stability of the cockpit suffers, but the seat moves!

Scope of delivery

• Force2Motion adapter set for the installation of the Motion Platform in the RSeat S1 cockpit incl. shifter extension plate, lifter for wheel and pedal plate (RSeat S1 cockpit and NLR Motion Platform NOT included);

Force2Motion RSeat N1 Adapter for Next Level Racing Motion Platform V3

What’s Included

• Force2Motion adapter for installing the Motion Platform in the RSeat N1 cockpit (RSeat Cockpit and Motion Platform not included)
• Manual (GERMAN)
• Attention: Due to the approx. 8cm higher seating position, the optionally available RSeat Keyboard stand can not be used without restrictions (legroom or height is not sufficient)

Force2Motion Adapterset for Next Level Racing Motion Platform V3 in Fanatec Cockpit

What’s Included

• Force2Motion adapter for installing the Motion Platform in the Fanatec cockpit (Fanatec Cockpit and Next Level Racing® V3 Motion Platform not included)
• Force2Motion adapter for mounting Fanatec handbrake on Fanatec shifter when using Motion Platform (handbrake, shifter and Fanatec Clamp not included)
• Manual (German)

Fanatec Cockpit and Next Level Racing® V3 Motion Platform not included!

R2R-Addon emergency stop switch for Sim-platforms 2x power cold devices plus emergency stop ProSimu (if included) incl. mounting bracket

With the mushroom head slater you can mount the power supply of the Motion Platform comfortably and easily accessible on the cockpit. The emergency stop switch can be switched on and off during the running simulation and the Motion Platform switches on and off during the running game.

Attention: We offer this article, which is individually assembled, only in connection with cockpits, motion platforms and racing simulators purchased from us. No sale to customers who have not purchased simulators from us.

What's included:

• F2M adapter bracket in black satin powder-coated with screws for mounting on the cockpit.
• 3x emergency stop switch wired with safety plug and 3x power cable (for terminal devices)
• Mount option for ProSimu emergency stop switch (included with ProsSimu system)
• Manual

Assembly: The assembly is done by the customer himself. Since the switch is a current-carrying component (220V), the opening and assembly may only be carried out by trained personnel (electricians or similar). We accept no liability for damage caused by disregarding these instructions!

R2R-Addon Force2Motion Buttkicker

• External butlicker with control unit from the brand manufacturer
• incl. external sound card USB

Attention: This is an article which is only sold in connection with Ready-To-Race-Bundles. No single delivery!

Force2Motion Fanatec Pedal Lifter
With the Force2Motion Fanatec Pedal-Lifter the pedal plate of the original Fanatec Cockpit V2 can be raised by 6 cm to compensate the slightly raised seating position when using the Next Level Racing Motion Platform (Force2Motion Edition) and to achieve a more reclined driver position. The longitudinal adjustability of the pedals remains fully intact.

Scope of delivery:
2 pieces 280 mm long aluminium profiles black powder-coated with 4 correspondingly long toggle screws M6 for exchange against original toggle screws.

Cockpit, Next Level Racing Motion Platform Force2Motion Edition etc. not included!

Next Level Racing Elite - DD Side & Front Mount Adaptor

Fast Facts:

1. High-quality, precision-made brackets offer the best Direct Drive mount for the Elite Series
2. Constructed from CNC machined 6061 solid anodized aluminium and precision folded carbon steel parts
3. Compatible with BOTH front mount and side mounting direct drive wheels from all leading brands to support customer wheel upgrades

About:

The Next Level Racing® Elite DD Side and Front Mount Adapter is the perfect upgrade for Elite Series cockpits, enabling sim racers to front or side mount all major Direct Drive wheelbases. Assembled from premium components, the Elite DD Side and Front Mount Adapter is the perfect solution for a wide variety of steering wheel mount configurations.

Force2Motion Adapter System Motion Platform Plus - Additional Bracing Rocker Top FGT

When mounting only one Motion Platform Plus in combination with the NLR FGT cockpit, an additional stiffening profile is required for height compensation.

The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.

Scope of delivery:

• Crossbar 80x40 for rocker Powder coating black fine structure
• 4x angle pieces for fastening Powder coating black fine structure
• 2x plugs 80x40
• Slot nuts, screws, nuts and washers
• Instructions in German (English in preparation)

Dimensions: approx. 80mm x 560mm x 120mm
Net weight: approx. 3,5 kg

The profile is only available in black powder coated.

 

Force2Motion Fanatec Pedal Lifter
With the Force2Motion Fanatec Pedal-Lifter the pedal plate of the original Fanatec Cockpit V2 can be raised by 6 cm to compensate the slightly raised seating position when using the Next Level Racing Motion Platform (Force2Motion Edition) and to achieve a more reclined driver position. The longitudinal adjustability of the pedals remains fully intact.

Scope of delivery:
2 pieces 280 mm long aluminium profiles black powder-coated with 4 correspondingly long toggle screws M6 for exchange against original toggle screws.

Cockpit, Next Level Racing Motion Platform Force2Motion Edition etc. not included!

Next Level Racing GT Elite Racing Simulator Cockpit - Wheel Plate Edition
 
Leading Features:
 

• Dedicated GT Cockpit with the most authentic and adaptable driving positio
• premium anodized black aluminium finish
• pre-machined precision holes in aluminium profile for rigidity and ease of assembly
• all the extra’s included such as nlr flex free seat slider system, seat brackets, height adjustable shock absorption feet, gear shifter & handbrake support plate, Buttkicker® Gamer 2 adaptor, cable management clips, and tool kit holder
• taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
• rigid and highly adjustable mounting supports included for your seat, wheel, pedals, shifter, handbrake
• pedal position height, angle and distance adjustable
• premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
• fully enclosed base frame for strength and aesthetics as well as one piece aluminium profiles for rigidity required for motion
• compatible with all major brands of electronics for major brands of wheels, pedals and shifters including Fanatec, Thrustmaster, Logitech, Simxperience and many more
• upgradable to be compatible with Next Level Racing® motion products and other accessories

About:

Introducing the new Next Level Racing® GTElite Cockpit. The GTElite cockpit’s patent-pending design brings rigidity and stability into a new price point making it the best mid-range aluminium profile cockpit on the market. With attention to detail and engineering as seen on our Elite series, the GTElite compared to mid-range cockpits in its class is more rigid, easier to assemble, provides more inclusions, while providing a higher quality finish.
 
While constructed to suit the mid-range category with a “4080” profile, through cutting edge engineering and manufacturing, combined with unique components, fixtures, and reinforcements, the GTElite is the most rigid mid-range cockpit. Through this innovative process, the GTElite in some cases is stronger than conventional “16040” cockpits seen on the market.
With an extensive ecosystem in mind, the GTElite is upgradable to be compatible with Next Level Racing® Motion Products and has the ability to be transformed into a multi-position cockpit solution with the ready set kits*.
 
*Motion Kit and Formula kit need to be purchased separately.

NEXT LEVEL RACING GTElite Lite Racing Simulator Cockpit - Side and Front Plate Edition

Leading features:

• Dedicated gt cockpit with the most authentic and adaptable driving position
• Premium anodized black aluminium finish
• Pre-machined precision holes in aluminium profile for rigidity and ease of assembly
• All the extra’s included such as nlr flex free seat slider system, height adjustable shock absorption feet, buttkicker® gamer 2 adaptor, cable management clips, and tool kit holder
• Taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
• Rigid and highly adjustable mounting supports included for your seat, wheel, pedals
• Pedal position height, angle and distance adjustable
• Premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
• Fully enclosed base frame for strength and aesthetics as well as one piece aluminium profiles for rigidity required for motion
• Compatible with all major brands of electronics for wheels and pedals including fanatec, simxperience and many more
• Upgradable to be compatible with next level racing® motion products and other accessories
• Front & side mount with 70 degrees of adjustability for direct drive wheelbases

About:

Build your own Elite Journey with the best value aluminium profile cockpit. The GTElite Lite cockpit’s patent-pending design brings rigidity and stability to a new price point making it the best mid-range aluminium profile cockpit on the market. With attention to detail and engineering as seen on our Elite series, the GTElite Lite compared to mid-range cockpits in its class is more rigid, easier to assemble, and provides more inclusions, while providing a higher quality finish.

While constructed to suit the mid-range category with a “4080” profile, through cutting edge engineering and manufacturing, combined with unique components, fixtures, and reinforcements, the GTElite Lite is the most rigid mid-range cockpit. Through this innovative process, the GTElite Lite in some cases is stronger than conventional “16040” cockpits seen on the market.
With an extensive ecosystem in mind, the GTElite Lite is upgradable to be compatible with Next Level Racing® Motion Products and can be transformed into a multi-position cockpit solution with the ready set kits*.

*Motion Kit and Formula kit need to be purchased separately.

 

Force2Motion Motion Platform Plus Adapter System - Base Support (bottom)

With the F2M adapter system Motion Platform Plus it is possible to mount one or two Motion Platform Plus on the Traction Plus. Depending on the rider's weight (75-100 kg) and the mounted cockpit, an additional V3 can then be inserted into the cockpit.
 
The system consists of a lower (mandatory) and upper (optional) carrier system. Depending on the cockpit used, the upper carrier may or may not be required. The lower carrier is called the basic set and contains the floor plates 150mm and two cross members with bracing plates for Traction-Plus mounting. These parts are not or only partially needed for the upper beam (extension set), as the Motion-Plus platforms are located at this point. The upper support can also be used on its own to extend the Wheel Stands DD and 2.0 with one or two Motion-Plus platforms and a V3 to a Motion Cockpit.

The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.

The basic carrier (below) is required for the following cockpits and motion platforms:

• NLR GT Elite Cockpit on Traction Plus (with Next Level Racing® GTElite Motion Adaptor Upgrade Kit).
• NLR FGT Elite Cockpit on Traction Plus
• NLR GTTrack Cockpit on Traction Plus
• NLR GTTrack Wheel Stand on Traction Plus (extension bracket required)
• NLR Wheel Stand 2.0 on Traction Plus (extension carrier required)
• NLR FGT Cockpit on Traction Plus (extension carrier required)
• NLR FGT Cockpit on Traction Plus (only extension carrier required - you do need the base support (bootom) for this!)
• Custom-built cockpits and third-party cockpits with Motion Plus on Traction Plus (Please enquire and seek advice individually!).

Next Level Racing GT Elite Keyboard and Mouse Tray - Black

Leading features:
 

1. Black anodised aluminum extrusion for a premium finish
2. Compatible with Next Level Racing® Elite Cockpit products
3. Optimized swivel, angle, and tilt adjustability
4. Customized Next Level Racing® Cable management clips included

 
About:

The Next Level Racing® Elite Keyboard and Mouse Tray- Black Edition is the perfect add-on for the Elite series cockpit, giving sim racers easier and ergonomic access to their controls whilst in the driver’s seat. Assembled from anodized black aluminium and Carbon steel components, the Elite Keyboard and Mouse Tray offer height, angle, and articulation adjustability, making it the perfect upgrade for the Elite series cockpits.

Next Level Racing GTTrack Cockpit frame only (without seat)

Pleae note: This article contains only the GTtrack frame without the seat (limited availability)!  If you need a complete cockpit, please order the products "Next Level Racing GTtrack" .

The new Next Level Racing GTtrack Cockpit presented at the SimRacingExpo 2018 can be tested in our showroom. An order is already possible. The system is expected to be available from end of November. Pre-orders will be accepted immediately and delivered in order of purchases. First come first serve.

The GTtrack is the ultimate cockpit for serious sim racers looking for rigidity, complete adjustability and a true race car seating position. The GTtrack has been designed with the close feedback of professional drivers and some of the world's fastest eSports drivers to give you every feature required for serious sim racing. The complete rigidity of the GTtrack allows it to support direct drive wheels and professional pedal sets as weil as being compatible with all major wheel and pedals including Thrustmaster®, Logitech® and Fanatec®.
 

GT Seat Add-On for Wheel Stand DD/WS 2.0

Features:

Next Level Racing Elite Direct Mount Overhead Monitor Add-On - Black Edition

Leading features:

1. Black anodised aluminum extrusion for a premium finish
2. Compatible with Next Level Racing® Elite Direct Monitor Mount- Black Edition
3. Supports single monitors up to 32” () *
4. Pre-drilled and Laser Alignment lines for easy assembly
5. VESA mount support 75mm X 75mm to 100mm X 100mm
6. Optimized angle and tilt adjustability for refined screen alignment

 
About:

The Next Level Racing® Elite Direct Mount Overhead Monitor Add-on- Black Edition, is the perfect solution for the serious sim racer to create a fully immersive and informational racing experience. The Elite Direct Mount Overhead Monitor Add-on will offer racers the ability to use the overhead screen for a plethora of functions such as live telemetry, streaming software, and more. The Elite Direct Mount Overhead Monitor Add-on is the perfect solution for non-Motion users.

*If you are considering adding the Motion Plat Plus or Traction Plus Platform products, we recommend exploring one of our Elite Free Standing Monitor Solutions as the motion experience during simulation could affect your Monitors/TVs.

Next Level Racing Traction Plus KIT (Cockpit-Mover)

With this article, an adapter kit for various cockpits as well as special F2M accessories can optionally be ordered at a preferential price.

Breathtaking realism and performance, incredible¬ immersion and precision, superb technology, engineering and manufacturing…introducing the Next Level Racing® Traction Plus Motion Platform.

The Traction Plus combined with the Next Level Racing® Motion Platform V3 provides incredible levels of vehicle feedback to the driver to feel exactly what the vehicle is doing by precisely delivering

• Sway
• Surge
• Roll
• Pitch
• Understeer and front traction loss – (critical feature usually only experienced in 6DOF motion platforms)
• Oversteer and rear traction loss
• Power slides and drifting                                                                          
• Partial Heave                                                                                                                                     
• Vehicle and Road effects such as road surface, bumps, wheel lock/spin, gear changes and more
• Shunting effects (to feel side impact contact from opponents/wall)

What’s in The Box

• Next Level Racing® Traction Plus Motion Platform
• Next Level Racing® Platform Manager software download
• USB and power cables including ferrite core
• Nuts and Bolts required for assembly
• Product Manual
• Adaptor plates to bolt your Next Level Racing® GTtrack or Next Level Racing® Flight Simulator Pro cockpit (coming 2019) directly to the Traction Plus platform
• Digital assembly instructions and assembly videos available here

Compatible Products

• Next Level Racing GTtrack
• Next Level Racing Flight Simulator Pro (coming 2019)
• Next Level Racing Motion Platform V3 (Traction Plus is designed to combine with the V3 motion platform to provide a ground breaking motion simulator experience)
• Other brand or DIY cockpits - As we experienced with the Motion Platform V3, many customers also have the ability to create custom adaption to their cockpit and with the Traction Plus we expect to see the same with mounting holes on top of the platform that users can adapt to use with their own cockpit.
• As with the Motion Platform V3 we do plan to release adaptors for other brand of cockpits

Compatible Operating System

The Platform Manager works only (!) with a Microsoft® Windows Operating System. So you will definitly need a Windows PC. No support for consoles like Xbox® or Playstation®!

Please note:
PC, V3, Cockpit, Games, Monitor, Monitorstands, Carpet, Controls etc. shown on the pictures are not included. 

Motion Systems Qubic System - QS-H13 - Seat Mover

About QS-H13 - Challenger

The QS-H13 Challenger sets new standards in the world of motion systems for anyone looking for a compact and extremely quiet solution for their driving or flight simulator. The Qubic System Seat Mover - QS-H13, based on the same advanced technology as the QS-220 actuators, surpasses and eclipses all currently available seat motion solutions.
With smooth and precise movement across two axes (tilt/roll), it accurately simulates the forces experienced when braking, cornering in a car or performing sharp manoeuvres in an aircraft.

According to the manufacturer, the first deliveries are scheduled for December 2025.

Compact design that fits anywhere

The Qubic System Seat Mover is designed for people who have limited space for a simulator but still want to enhance their simulation experience without cluttering their environment.
The platform is equipped with industrial-grade components and exceptional structural rigidity, keeping it stable and providing a seamless connection to the vehicle so that the user can accurately feel details such as suspension behaviour. Installation is simple and requires no special craftsmanship or technical knowledge.
It is compatible with most aluminium cockpits without the need for additional brackets or drilling. Operates on 115/230 V, so no voltage converters are required. Just plug it in and get started. In addition, power consumption is low compared to other systems on the market.
 
Vibrations and haptics reserved for high-end products

Say goodbye to external devices such as bass shakers or other vibration generators for effects such as engine feedback. With this device, you get integrated functionality that delivers a wide range of low and high frequency vibrations. This allows you to better perceive various effects, improve your connection to the vehicle and become a better driver or pilot. These features are usually only found in high-end products and set this device apart from cheaper alternatives that lack vibration effects. They underline the high quality of the product.

Responsive precision without delay

One of the biggest challenges in the world of simulation is ensuring that a device can keep up with telemetry signals and accurately reproduce inputs without unnecessary delays. The QS-H13 has been designed in both hardware and software to ensure that there is no noticeable latency while driving. This advantage becomes even more apparent when using VR headsets, as the system integrates seamlessly with Qubic Manager's built-in motion compensation. This feature requires no additional setup – just plug it in and get started.

Silent and smooth operation

The system uses the same technology as the QS-220 and ensures extremely quiet operation, as it does not require gears or DC motors, which are common in other similar solutions on the market. Thanks to its silent operation, the simulator can be used in living spaces and late at night without disturbing other household members or neighbours. It delivers precise movements to accurately replicate the telemetry signals received by the simulation engine, improving vehicle control and enabling faster reactions, e.g. in the event of traction loss.

QS-H13 compatibility – designed for aluminium cockpits

The 2DOF Challenger is designed to fit perfectly with most aluminium cockpits and cockpits from other well-known brands. Its design makes it easy to install and compatible with a wide range of standard and optional equipment. It also works seamlessly with other devices from the Qubic system family, such as the QS-210, QS-220, QS-CH2 and QS-BT1. This makes it easy to expand your setup and ensures that all components work well together to provide an optimal simulation experience.
 

Technical specifications:

• Architecture 2 DOF
• Payload 130 kg
• Product weight: 33 kg
• Total length 417 mm | 16.41 in
• Total width 460 mm | 18.11 in
• Total height 231 mm | 9.09 in
• Storage temperature: +5 °C to +40 °C
• Supported effects: depending on the game
• Interface: USB
• Computer Windows PC
• Maximum length of USB cable: 3 m
• Maximum length of Motion Lock cable: 3 m
• Voltage range: 110C-240 VAC
• Frequency: 50-60 Hz
• Maximum current consumption: 10.43 A
• Maximum power consumption: 480 W

Scope of delivery:

• MAIN UNIT (QS-H13)
• USB cable
• External power supply
• Mounting adapter for aluminium cockpits
• Mounting adapter for BT1
• Motion Lock jumper and connection cable
• Qubic Manager (free licence included)

NOT INCLUDED (sold separately):

• Motion SDK – ForceSeatDI
• Motions SDK – ForceSeatMI | Motion Theater
• Seat angle
• Motion lock switch (emergency stop)

Important safety information:

The QS-H13 Challenger Seat Mover does not have any so-called E-brakes, which means that the seat can be moved by hand when switched off. If the centre of gravity of the seat is not above the centre point of the H13 (e.g. when mounting a BT1 at the rear), the seat may slowly move into one of the end positions (e.g. tilted backwards) after the power supply has been switched off or the optional emergency stop switch has been activated. Therefore, it is essential to ensure that the seat can always move freely and to mechanically lock the seat during installation work!

 

 

Next Level Racing® Flight Simulator Cockpit - BOEING COMMERCIAL EDITION

LEADING FEATURES

• Dedicated flight cockpit for maximum simulation immersion
• Suited for Combat flight, General Aviation, Commercial flight, and Space Exploration users
• Compatible with flight electronics such as yokes, joysticks, rudders, and throttles for all major brands
• Wide range of adjustments to tailor your flight experience
• Includes keyboard and mouse support for easy navigation with custom Next Level Racing® keyboard and mouse pads
• Compatible with Thrustmaster® / Logitech / Saitek® / Honeycomb/ Virtual Fly/ Crosswind and other flight accessory brands
• Includes Buttkicker® Adaptor, Next Level Racing® Four-point harness, and Lumber Support
• Motion Compatible with added accessories**

**To make the Next Level Racing® Flight Simulator Cockpit range motion compatible, users will require the Next Level Racing® Motion Plus Platform Adaptor.

Force2Motion GTTrack Pedallifter

After installing the Next Level Motion Platform V3 in the GTTrack cockpit, the pedal plate may be too low in relation to the seat height for some people. We have the solution for this: With the Force2Motion GTTrack Pedallifter the pedal plate is raised by 80mm. This completely compensates for the higher seat position. The pedal lifter is made of solid aluminium and is powder coated in matt black. Plastic end caps provide a clean look. Longer screws are included.
 

Next Level Racing® Flight Simulator Cockpit

LEADING FEATURES

• Dedicated flight cockpit for maximum simulation immersion
• Suited for Combat flight, General Aviation, Commercial flight, and Space Exploration users
• Compatible with flight electronics such as yokes, joysticks, rudders, and throttles for all major brands
• Wide range of adjustments to tailor your flight experience
• Includes keyboard and mouse support for easy navigation with custom Next Level Racing® keyboard and mouse pads
• Compatible with Thrustmaster® / Logitech / Saitek® / Honeycomb/ Virtual Fly/ Crosswind and other flight accessory brands
• Includes Buttkicker® Adaptor, Next Level Racing® Four-point harness, and Lumber Support
• Motion Compatible with added accessories**

**To make the Next Level Racing® Flight Simulator Cockpit range motion compatible, users will require the Next Level Racing® Motion Plus Platform Adaptor. 
 
 

Force2Motion RSeat N1 Adapter for Next Level Racing Motion Platform V3

What’s Included

• Force2Motion adapter for installing the Motion Platform in the RSeat N1 cockpit (RSeat Cockpit and Motion Platform not included)
• Manual (GERMAN)
• Attention: Due to the approx. 8cm higher seating position, the optionally available RSeat Keyboard stand can not be used without restrictions (legroom or height is not sufficient)

Next Level Racing Elite Tablet and Button Box Mount Add-On

Leading features:
 

1. Compatible with the Next Level Racing® Elite series Cockpits 
2. Wide range of tilt and angle adjustment for fine tunning  
3. Compatible with Mobile Phones, Tablets, and Button Boxes  
4. Tablet Mount Bracket supporting heights from  
5. Button Box Bracket supporting heights from 35mm - 155mm 

 
About:

The Next Level Racing® Elite Tablet/ Button Box Add-on, is the perfect solution for the serious sim racer to complete the full informational and immersive simulation experience to have a tablet or button box within reach with complete adjustability. With a wide range of mounting options for the Elite Tablet/ Button Box Add-on, users are able to customize their simulator for the best simulation experience. By having a permanent station for a button box or a tablet, the user is able to create a more connected and informed experience with simulation.  

Next Level Racing Race-Seat ES1 Ford - Edition

Fast Facts:

1. Ergonomically designed and engineered specifically for sim racing
2. Compatible with all side mounting seat brackets
3. Five-axis Rotationally molded polymer seat for ultimate tensile strength
4. PU molded Foam with premium suede finish
5. Next Level Racing seat belts included for increased immersion and motion users
6. Comfortably fit users up to 42” waist and built rigid to support up to 250 kg users

About:
 
The Next Level Racing® Elite ES1 seat is designed and developed for the most demanding sim racer using both virtual and real motorsport industry feedback. Manufactured using a five-axis roto-molded process to provide optimal support and rigidity at every mounting position. Drivers will enjoy the high-quality PU molded foam suede cushions over countless hours of racing. The Elite ES1 is a versatile solution for every type of sim racer.
 

Next Level Racing Motion Platform SDK

Detailed product information can be found on the manufacturer's website at http://www.nextlevelracing.com/sdk/

Attention: The software is explicitly assigned to the serial number of your Motion Platform V3. It is not possible to return the software after ordering (revocation). The Next Level Racing Traction+ is also supported. However, the V3 is always licensed and the SDK can only be used when the V3 is switched on. A single operation of the Traction Plus with the SDK is not possible.

(Motion Platform not included)

Next Level Racing® Flight Simulator Cockpit - Microsoft Flight Simulator Edition

Leading Features

• Officially Licensed by Microsoft Flight Simulator – Created in partnership with Microsoft for unmatched realism and authenticity.
• Industry-First Adjustable Lumbar Support – Custom-tune your lower-back comfort with the first integrated lumbar system designed specifically for flight simulation—quick to adjust and built for long sessions.
• Enhanced Comfort Seat Design – With added padding and a premium PU leather finish, the new seat offers superior comfort and durability for long flight sessions.
• Supports All Flight Disciplines – Suited for commercial, general aviation, combat, and space simulation.
• Universal Compatibility – Compatible with dedicated mounting patterns for yokes, throttles, and joysticks from major brands.
• Highly Adjustable and Modular – Offers a wide range of height, distance, and angle adjustments for all types of users and setups.
• Next Level Racing® Ecosystem Ready – Expand your setup with motion platforms*, monitor stands, keyboard trays, and more.

About
The Next Level Racing® Flight Simulator Cockpit Microsoft Flight Simulator Edition is a purpose-built cockpit developed in official partnership with Microsoft Flight Simulator, engineered to meet the demands of serious flight simulation users. Designed for long-duration sessions and high-precision control, this cockpit offers a robust, highly adjustable platform suited for commercial, general aviation, military, and space flight simulation. Featuring a reinforced frame and a fully new developed, ergonomic flight seat with industry first integrated lumbar adjustment, it provides a stable and comfortable foundation for advanced flight sim setups. With full compatibility across a wide range of flight peripherals and seamless integration into the Next Level Racing® ecosystem, this cockpit is built to support the full scope of flight simulation—now and into the future.
 
 

Next Level Racing® F-GT Elite Formula and GT Aluminium Profile Simulator Cockpit iRacing Edition
 
Fast Facts:

1. All in one cockpit with quick adjustments for all driving positions including true formula, GT, Hybrid, Truck, and Tank
2. Free 12 months iRacing® subscription for new users (110 USD Value)
3. Rigid and highly adjustable mounting support included for your seat, wheel, pedals, shifter, handbrake
4. Post anodized custom carbon grey (scratch resistant) aluminium profile with premium carbon steel powder coated components
5. Pedal position height, angle and distance adjustable
6. Pre-machined holes in aluminium profile for rigidity and ease of assembly
7. Compatible and easy installation with Next Level Racing® Motion Platforms
8. All the extra’s included such as NLR seat slider system, seat brackets, height adjustable shock absorption feet, gear shifter & handbrake support plate, foot step, Buttkicker® Gamer 2 adaptor, cable management clips, Motion Platform V3 adaptors, ratchet tool & more
9. Premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
10. T-slot extruded aluminium allows compatibility of accessories with other cockpit brands
11. Fully enclosed base frame for strength and aesthetics
12. Taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
13. Compatible with all major brands of electronics for major brands of wheels, pedals and shifters including Fanatec, Thrustmaster, Logitech, Simxperience and many more

Please note: For direct drive wheel users such as Fanatec® DD/ Simucube®/ Simagic® Next Level Racing recommends the Next Level Racing® F-GT Elite Front and Side Mount edition or the separetly available adaptor for an optimal racing experience.

Next Level Racing Elite Motion Adaptor Upgrade Kit

Leading Features

1. Compatible with the Next Level Racing® Elite Series Cockpits, Motion Platform V3, and Traction Plus Platform 
2. Transforms the Elite cockpit into a motion compatible simulator* 
3. Constructed with premium Carbon Steel and Aluminium Extrusion
4. Finished with high quality powder coating and anodised aluminium parts
5. Pre-drilled and machined for streamline installation

About


The Next Level Racing® Elite Motion Adaptor Upgrade Kit is a sim racer’s step towards full immersion, making the Elite* cockpit compatible with the Next Level Racing® Motion V3 and Traction Plus Platform. A combination of precision CNC-machining and laser cutting manufacturing process, as well as anodised and powder coat finish, gives the Elite Motion Adaptor Upgrade Kit the same level of quality and rigidity as expected from our Elite range of simulation products. *Please check Motion Products to see if your cockpit requires the Elite Motion Adaptor Upgrade Kit as not all Elite cockpits require this add-on

Next Level Racing Elite Hardware Kit

 
Leadng Features:

1. Includes a variety of Bolts to suit custom DIY setups for extrusion style cockpits
2. Ultra-Low-profile hardware for use on front & side mount components
3. Includes a wide range of comes with a multitude of different fasteners, fixings, and tools to take your setup to the next level
4. Compatible with the Next Level Racing® Elite Series Cockpits and other extrusion type cockpits

About:

The Next Level Racing® Elite Hardware Kit is the perfect addition for any user that requires more hardware for your elite range cockpit or your do-it-yourself project for their do-it-yourself projects. With a wide range of bolts and T-nuts, the user has the option to add extra aluminium extrusion to their cockpit for the most customized simulation experience. The Next Level Racing® Elite Hardware Kit comes with a multitude of different fasteners, fixings, and tools to take your setup to the next level. The quality of components can be seen in other Elite products with the same amount of attention and detail.

Next Level Racing GT Elite Racing Simulator Cockpit - Ford GT Wheel Plate Edition - Blue Line

Fast Facts

• Dedicated GT cockpit with the most authentic and adaptable driving position
• Premium anodized blue aluminium finish with laser etched ford branding
• Official Ford licensed product with Ford GT branding
• Pre-machined precision holes in aluminium profile for rigidity and ease of assembly
• All the extra’s included such as nlr flex free seat slider system, seat brackets, height adjustable shock absorption feet, gear shifter & handbrake support plate, buttkicker® gamer 2 adaptor, cable management clips, and tool kit holder
• Taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
• Rigid and highly adjustable mounting supports included for your seat, wheel, pedals, shifter, handbrake
• Pedal position height, angle and distance adjustable
• Premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
• Fully enclosed base frame for strength and aesthetics as well as one piece aluminium profiles for rigidity required for motion
• Compatible with all major brands of electronics for major brands of wheels, pedals and shifters including fanatec, thrustmaster, logitech, simxperience and many more
• Upgradable to be compatible with Next Level Racing® motion products and other accessories

About

Introducing an official Ford Licensed product, the Next Level Racing® GTElite Ford GT Edition Cockpit. The GTElite Ford GT Edition cockpit’s patent-pending design brings rigidity and stability into a new price point making it the best mid-range aluminium profile cockpit on the market. Premium blue anodization finish, laser etched Ford Oval logo, Ford GT Logo, and the laser etched iconic Ford GT stripes, the GTElite Ford GT Cockpit completes the Ford brand experience for the user. With attention to detail and engineering as seen on our Elite series, the GTElite Ford Edition compared to mid-range cockpits in its class is more rigid, easier to assemble, provides more inclusions, while providing a higher quality finish.

While constructed to suit the mid-range category with a “4080” profile, through cutting edge engineering and manufacturing, combined with unique components, fixtures, and reinforcements, the GTElite Ford Edition is the most rigid mid-range cockpit. Through this innovative process, the GTElite Ford GT Edition in some cases is stronger than conventional “16040” cockpits seen on the market. With an extensive ecosystem in mind, the GTElite is upgradable to be compatible with Next Level Racing® Motion Products and has the ability to be transformed into a multi-position cockpit solution with the ready set kits*.

*Motion Kit and Formula kit need to be purchased separately.
 

Force2Motion Motion Platform Plus adapter system - Motion Plus extension base support

With the basic carrier Motion Plus extension, the F2M adapter system Motion Platform Plus can be extended so that a second Motion Platform Plus can be used and mounted on the Traction Plus. Depending on the rider's weight (75-100 kg) and the mounted cockpit, an additional V3 can then be inserted into the cockpit.
 
The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.

Scope of delivery:

• 1x Motion Plus cross member (for mounting a second Motion Plus platform) according to the selected colour or coating.
• 2x corner plates powder coating black fine structure
• Slot nuts, screws, nuts and washers
• Instructions in German (English in preparation)

Dimensions: approx. 105mm x 575mm x 60mm

Net weight: approx. 1,4 kg

Delivery times:
 
Delivery time for stock items (inventory items) is usually 2-5 days from receipt of order and payment. Combinations that are not in stock or are explicitly made due to a special colour request usually require 4-6 weeks delivery time.

NEXT LEVEL RACING GTElite Lite Racing Simulator Cockpit - Wheel Plate Edition

Leading features:

• Dedicated gt cockpit with the most authentic and adaptable driving position
• Premium anodized black aluminium finish
• Pre-machined precision holes in aluminium profile for rigidity and ease of assembly
• All the extra’s included such as nlr flex free seat slider system, height adjustable shock absorption feet, buttkicker® gamer 2 adaptor, cable management clips, and tool kit holder
• Taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
• Rigid and highly adjustable mounting supports included for your seat, wheel, pedals,
• Pedal position height, angle and distance adjustable
• Premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
• Fully enclosed base frame for strength and aesthetics as well as one piece aluminium profiles for rigidity required for motion
• Compatible with all major brands of electronics for major brands of wheels and pedals including fanatec, thrustmaster, logitech, simxperience and many more
• Upgradable to be compatible with next level racing® motion products and other accessories

About:

Build your own Elite Journey with the best value aluminium profile cockpit. The GTElite Lite cockpit’s patent-pending design brings rigidity and stability into a new price point making it the best mid-range aluminium profile cockpit on the market. With attention to detail and engineering as seen on our Elite series, the GTElite Lite compared to mid-range cockpits in its class is more rigid, easier to assemble, provides more inclusions, while providing a higher quality finish.

While constructed to suit the mid-range category with a “4080” profile, through cutting edge engineering and manufacturing, combined with unique components, fixtures, and reinforcements, the GTElite Lite is the most rigid mid-range cockpit. Through this innovative process, the GTElite Lite in some cases is stronger than conventional “16040” cockpits seen on the market.
With an extensive ecosystem in mind, the GTElite Lite is upgradable to be compatible with Next Level Racing® Motion Products and can be transformed into a multi-position cockpit solution with the ready set kits*.

*Motion Kit and Formula kit need to be purchased separately.
 

Next Level Racing F-GT Elite 160 Front and Side Mount Edition - BLACK

Leading features:

• The ultimate, no compromise, all-in-one 160 aluminium profile racing cockpit for the Elite sim racers
• Offering multi-position Formula, Hybrid, GT, Truck, and Tank driving ergonomics
• Premium black anodised aluminium profile with high quality powder-coated carbon steel components and pre-machined holes for ease of assembly and rigidity.
• Compatible with the Next Level Racing® Motion Platforms*
• Pre-Drilled for Universal compatibility with major steering wheels, pedals, shifter, and handbrake manufacturers
• Industry benchmark aluminium extrusion design with bespoke Next Level Racing® End Caps & T-Slot nuts, and Next Level Racing® Flex-Free Seat Sliders and custom Next Level Racing® shoulder bolts
• Custom NLR 160mm X 40mm aluminium profile base for strength and rigidity

About:

The Next Level Racing® F-GT Elite 160 Front & Side Mount Edition is the definitive, premier simulator cockpit. Built for the Elite, the F-GT Elite 160 Front & Side Mount Edition is designed for racers who demand the highest quality and uncompromised rigidity for racing.

The Next Level Racing® F-GT Elite 160 Front & Side Mount Edition is the result of extensive research and feedback and is unrivaled when it comes to flex-free, high quality aluminium extrusion simulation cockpits. The F-GT Elite 160 Front & Side Mount Edition sets the benchmark for quality and rigidity - from the premium anodised high-grade aluminium extrusion and powder-coated carbon steel components to the bespoke Next Level Racing® end caps and T-slot nuts.

Racers will feel at home in the F-GT Elite 160, with near-infinite adjustability and customisation options available, and is also compatible with the Next Level Racing® Motion Ecosystem*. Featuring industry-leading materials in combination with fine-tuning adjustability and compatibility, the F-GT Elite 160 Front & Side Mount Edition offers the most premium immersive simulation experience on the market.
*The Next Level Racing® F-GT Elite 160 is compatible with the Next Level Racing® Motion Platform V3, Motion Plus Platform. Users can attach two Motion Plus Platforms. Users wanting to attach the Traction Plus Platform to the cockpit require the Next Level Racing® Elite Motion Adaptor Upgrade Kit.
 

Next Level Racing® Free Standing Triple Monitor Stand

The Next Level Racing® Free Standing Triple Monitor Stand finishes off your racing simulator setup to give ultimate immersion to race like a professional. The stand supports triple screens from 32 - 65” allowing up to a huge 195” of peripheral vision for incredible realism. The stand includes both lockable wheels for easy movement and height adjustable feet, the choice is yours. The design is based on customer feedback allowing you to have your screens in the perfect position of your choice whether that is directly behind the wheel or further back from your cockpit and allowing you to change the position of the screens easily and quickly. Being completely free standing and with lockable wheels it also makes it the perfect monitor stand for events, trade shows and sim racing centers.

Leading Features

• Solid and rigid design that supports 3 x 32- 65” monitors
• Universally designed VESA mounting range to allow support for largest range of TV sizes
• Wider design allows the monitor to be placed directly behind the wheel or further away if preferred
• Lockable Castor Wheels allow portability as well as quick and easy angle adjustment of outer screens
• All forms of adjustment including angle, tilt and height

NOT RECOMMENDED for FGT and GT-Elite series or when using the Traction Plus system as the distance between the feet is too small.

Next Level Racing GT Elite Racing Simulator Cockpit - Front and Side Mount Edition
 
Leading Features:
 

• Dedicated GT Cockpit with the most authentic and adaptable driving positio
• premium anodized black aluminium finish
• pre-machined precision holes in aluminium profile for rigidity and ease of assembly
• all the extra’s included such as NLR flex free seat slider system, seat brackets, height adjustable shock absorption feet, gear shifter & handbrake support plate, Buttkicker® Gamer 2 adaptor, cable management clips, and tool kit holder
• taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
• rigid and highly adjustable mounting supports included for your seat, wheel, pedals, shifter, handbrake
• pedal position height, angle and distance adjustable
• premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
• fully enclosed base frame for strength and aesthetics as well as one piece aluminium profiles for rigidity required for motion
• compatible with all major brands of electronics for major brands of wheels, pedals and shifters including Fanatec, Thrustmaster, Logitech, Simxperience and many more
• upgradable to be compatible with Next Level Racing® motion products and other accessories
• Front & Side Mount with 70 degrees of adjustability for Direct Drive Wheelbases

About:

Introducing the new Next Level Racing® GTElite Cockpit. The GTElite cockpit’s patent-pending design brings rigidity and stability into a new price point making it the best mid-range aluminium profile cockpit on the market. With attention to detail and engineering as seen on our Elite series, the GTElite compared to mid-range cockpits in its class is more rigid, easier to assemble, provides more inclusions, while providing a higher quality finish.
 
While constructed to suit the mid-range category with a “4080” profile, through cutting edge engineering and manufacturing, combined with unique components, fixtures, and reinforcements, the GTElite is the most rigid mid-range cockpit. Through this innovative process, the GTElite in some cases is stronger than conventional “16040” cockpits seen on the market.
With an extensive ecosystem in mind, the GTElite is upgradable to be compatible with Next Level Racing® Motion Products and has the ability to be transformed into a multi-position cockpit solution with the ready set kits*.
 
*Motion Kit and Formula kit need to be purchased separately.

Next Level Racing® F-GT Elite Formula & GT Aluminium Profile Simulator Cockpit - Wheel Plate Edition

Key Features:

1. All in one cockpit with quick adjustments for all driving positions including true formula, GT, hybrid, truck, and tank
2. Rigid and highly adjustable mounting support included for your seat, wheel, pedals, shifter, handbrake
3. Post anodized custom carbon grey (scratch resistant) aluminium profile with premium carbon steel powder coated components
4. Pedal position height, angle and distance adjustable
5. Pre-machined holes in aluminium profile for rigidity and ease of assembly
6. Compatible and easy installation with Next Level Racing® Motion Platforms
7. All the extra’s included such as NLR seat slider system, seat brackets, height adjustable shock absorption feet, gear shifter & handbrake support plate, foot step, Buttkicker® gamer 2 adaptor, cable management clips, Motion Platform V3 adaptors, ratchet tool & more
8. Premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
9. T-slot extruded aluminium allows compatibility of accessories with other cockpit brands
10. Fully enclosed base frame for strength and aesthetics
11. Taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
12. Compatible with all major brands of electronics for major brands of wheels, pedals and shifters including Fanatec, Thrustmaster, Logitech, Simxperience and many more

Please note: For direct drive wheel users such as Fanatec® DD/ Simucube®/ Simagic® Next Level Racing recommends the Next Level Racing® F-GT Elite Front and Side Mount Edition for an optimal racing experience

Next Level Racing® Flight Simulator Cockpit - BOEING MILITARY EDITION

LEADING FEATURES

• Dedicated flight cockpit for maximum simulation immersion
• Suited for Combat flight, General Aviation, Commercial flight, and Space Exploration users
• Compatible with flight electronics such as yokes, joysticks, rudders, and throttles for all major brands
• Wide range of adjustments to tailor your flight experience
• Includes keyboard and mouse support for easy navigation with custom Next Level Racing® keyboard and mouse pads
• Compatible with Thrustmaster® / Logitech / Saitek® / Honeycomb/ Virtual Fly/ Crosswind and other flight accessory brands
• Includes Buttkicker® Adaptor, Next Level Racing® Four-point harness, and Lumber Support
• Motion Compatible with added accessories**

Next Level Racing Universal Handbrake Plate

Leading Features:

• Dual mounting options for Shifter and Handbrakes
• Compatible with the Next Level Racing® F-GT, F-GT Lite, GTLite, GTLite Pro, and Wheel Stand 2.0
• Compatible with shifters and handbrakes from most major brands
• Quick and easy installation to the cockpit  

About:

Introducing the Next Level Racing Universal Handbrake Plate –the ultimate solution that now allows you to mount both your shifter and handbrake to the cockpit simultaneously. The Universal Handbrake Plate is designed to provide a seamless, integrated experience for dual-control setups, delivering both durability and adaptability. Compatible  
Compatibility and Customization

Our universal plate's adjustable mounting positions are its crowning feature, allowing for seamless integration with Next Level Racing® Cockpits such as the F-GT, GTLite, GTLite Pro, F-GT Lite, and Wheelstand 2.0. Universal Handbrake Plate is compatible with a wide range of shifter and handbrakes from Thrustmaster, Logitech, Fanatec, and Moza Racing.
*For more information regarding cockpit compatibility or electronic compatibility, please reach out to our Product Support Team at support@nextlevelracing.com
Robust Build for Enduring Performance

Constructed from premium carbon steel, our handbrake plate assembly promises longevity with its 3mm thickness and a high-quality matt powder-coated finish, ensuring it withstands the rigors of intense racing sessions. The plate's precise laser-cut design guarantees a perfect fit, while the durable hardware ensures your setup remains secure lap after lap.
 

Force2Motion Adapter-System Motion Platform Plus - Additional Floor Plate Set Top

If the NLR-FGT-Cockpit (not FGT-ELITE) is used, an additional floor plate with stiffening profile is required. If only one Motion-Plus-Platform is used with the FGT-Cockpit, an 80x40 height compensation profile is required (see separate article).

The complete description of the product incl. all possible combinations and the restrictions regarding the weight when using a Traction Plus System can be found in the following PDF.

Force2Motion adapter system Motion Platform Plus - extension carrier (top)

The upper frame (F2M adapter system Motion Platform Plus extension carrier) is used to accommodate the Wheel Stands of the NLR GTTrack Cockpit or the NLR Wheel Stand DD or the NLR Wheel Stand 2.0 and, together with a V3, to form the cockpit, which can then be equipped with one or two Motion Platform Plus. If this construct is to be mounted on a Traction Plus, you will also need the F2M base support.

And the upper frame can also (alone - without the lower carrier) "transport" the NLR FGT cockpit (with and without NLR seat) to a Motion Cockpit. Here you can integrate one or two Motion Platform Plus and operate the whole thing "solo" with the original floor supports from NLR. And you can even strap the system onto a Traction Plus system. Pretty crazy, but it works.

The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.

The extension carrier (top) is needed for the following cockpits and motion platforms:

•  NLR GTTrack Wheel Stand on Traction Plus (base adapter required)
•  NLR Wheel Stand DD on Traction Plus (base adapter required)
•  NLR Wheel Stand DD without Traction Plus
•  NLR Wheel Stand 2.0 on Traction Plus (basic adapter required)
•  NLR Wheel Stand 2.0 without Traction Plus
•  NLR FGT Cockpit on Traction Plus (base adapter required)
•  NLR FGT Cockpit without Traction Plus

Scope of delivery:

• 2x side member with holes in specified colour
• 4x end plugs in black plastic
• 2x cross member top/outside with thread at the head sides
• 2x upper cross member for upper floor panel
• 2x top floor panel as step protection, bracing and mounting for various cockpits
• 1x top cross member for mounting rocker (original pivot bar when mounting only one Motion Plus platform)
• Slot nuts, screws, nuts and washers
• Instructions in German (English in preparation)

Dimensions: approx. 1370mm x 575mm x 60mm
Net weight: approx. 11 kg

Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. Manual skills and tools (including a ratchet set, Allen key, open-ended spanner set) are required for assembly. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!

Please note:

• Motion platforms, Traction Plus, V3 etc and cockpits not included. The article presented here only contains the parts described under "Scope of delivery".
• When mounting the system on an NLR Traction Plus system, please note the maximum payload of 235 kg (incl. driver)!
• There are various options for this article, which are shown in the compatibility matrix.

Attention: Once again, because it is so important: The maximum payload of the Traction Plus System is 235 kg including all components mounted on it such as Motion Platform V3, Motion Platform Plus, cockpits and controls and of course the driver himself. This weight must not be exceeded, otherwise the warranty for the Traction Plus system will be voided!
 

Next Level Racing Race-Seat Elite ES1 Seat Scuderia Ferrari Edition

Fast Facts:

• Eergonomically designed and engineered specifically for sim racing
• Official Ferrari licensed product
• Compatible with all side mounting seat brackets
• PU molded foam with premium suede finish
• Five-axis rotationally molded polymer seat for ultimate tensile strength
• Next Level Racing branded red seat belts included for increased immersion and motion users
• Comfortably fit users up to 42” waist and built rigid to support up to 250kg users

About:

An Official Ferrari Licensed Product: The Next Level Racing® Elite ES1 Scuderia Ferrari Edition is designed and developed for the most demanding sim racer using both virtual and real motorsport industry feedback. The Elite ES1 Scuderia Ferrari Edition Seat has been manufactured using a five-axis roto-molded process to provide optimal support and rigidity at every mounting position. Drivers will enjoy the high-quality motorsport inspired platform embossed PU molded foam suede cushions for countless hours of racing. The Elite ES1 Scuderia Ferrari Edition Seat is the perfect seat solution for every genre of sim racing. Adorned with the fabled Italian brand’s Scuderia Ferrari Racing Shield, embossed motorsport racing seat molded foam, it is the perfect addition to the F-GT Elite 160 Scuderia Ferrari Edition Cockpit*.

*F-GT Elite 160 Scuderia Ferrari Edition Cockpit is sold separately
 
Video: https://youtu.be/LZWPp3BtKzQ

The Force2Motion tip: do you really value the Ferrari logo? If not, take a look at the standard version of the ES1. It's much cheaper and we usually have it in stock...

Next Level Racing GT Elite Formula and Hybrid Pedal Upgrade Kit

Leading Features:
 

1. Converts Next Level Racing® Elite into a Formula and Hybrid racing cockpit**
2. Increased range of 70 degrees of tilt for pedal positioning  
3. Constructed from the highest quality premium Carbon Steel  
4. Next Level Racing® Premium 5mm Carbon Steel Seat Brackets with 98 adjustment options  

About:

The Elite Formula and Hybrid Upgrade Kit transforms the Elite series cockpits** into an ultra-versatile cockpit offering Formula, GT, and Hybrid driving positions. Cutting-edge laser cutting manufacturing has resulted in uncompromised rigidity, whilst offering the same attention to detail and quality as expected from our Elite range of cockpits. The Elite Formula and Hybrid Pedal Upgrade Kit also includes the Next Level Racing® Premium 5mm Carbon Steel Seat Brackets, giving sim racers 98 adjustment options to find their perfect seating position.

**Please note not all Elite cockpits require the Formula and Hybrid Upgrade Kit. This is for Elite cockpits that only offer GT position and the user wants to upgrade to a multiple-position cockpit. 

Next Level Racing Race-Seat ES1

Fast Facts:

1. Ergonomically designed and engineered specifically for sim racing
2. Compatible with all side mounting seat brackets
3. Five-axis Rotationally molded polymer seat for ultimate tensile strength
4. PU molded Foam with premium suede finish
5. Next Level Racing seat belts included for increased immersion and motion users
6. Comfortably fit users up to 42” waist and built rigid to support up to 250 kg users

About:
 
The Next Level Racing® Elite ES1 seat is designed and developed for the most demanding sim racer using both virtual and real motorsport industry feedback. Manufactured using a five-axis roto-molded process to provide optimal support and rigidity at every mounting position. Drivers will enjoy the high-quality PU molded foam suede cushions over countless hours of racing. The Elite ES1 is a versatile solution for every type of sim racer.
 

Next Level Racing® Free Standing Keyboard and Mouse Stand – Compatible with all racing cockpits and wheel stands
 

• The Next Level Racing® Free Standing Keyboard and Mouse Stand is free standing so it can be positioned to your preference and also making it compatible with any wheel stand or cockpit.
• Allows easy access to keyboard and mouse when required
• Includes Next Level Racing® Keyboard and Mouse Mats Height Adjustable feet, Instructions for assembly

Next Level Racing® F-GT Elite Formula & GT Aluminium Profile Simulator Cockpit - Side and Front Mount Edition

Fast Facts:

1. All in one cockpit with quick adjustments for all driving positions including true formula, GT, Hybrid, Truck, and Tank
2. Zero-flex Front & Side Mount with 70 degrees of adjustability for Direct Drive wheelbases
3. Rigid and highly adjustable mounting support included for your seat, wheel, pedals, shifter, handbrake
4. Post anodized custom carbon grey (scratch resistant) aluminium profile with premium carbon steel powder coated components
5. Pedal position height, angle and distance adjustable
6. Pre-machined holes in aluminium profile for rigidity and ease of assembly
7. Compatible and easy installation with Next Level Racing® Motion Platforms
8. All the extra’s included such as NLR seat slider system, seat brackets, height adjustable shock absorption feet, gear shifter & handbrake support plate, foot step, Buttkicker® Gamer 2 adaptor, cable management clips, Motion Platform V3 adaptors, ratchet tool & more
9. Premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
10. T-slot extruded aluminium allows compatibility of accessories with other cockpit brands
11. Fully enclosed base frame for strength and aesthetics
12. Taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
13. Compatible with all major brands of electronics for wheels, pedals and shifters including Fanatec, Simxperience and many more

Please note: For non-direct drive, bottom mounting wheel users such as Fanatec® Clubsport/ Thrustmaster® Next Level Racing® recommends the Next Level Racing® F-GT Elite Wheel Plate Edition Cockpit

Next Level Racing GTTrack Cockpit

The GTtrack is the ultimate cockpit for serious sim racers looking for rigidity, complete adjustability and a true race car seating position. The GTtrack was designed with the close feedback of professional drivers and some of the world's fastest eSports drivers to give you every feature required for serious sim racing. The complete rigidity of the GTtrack allows it to support direct drive wheels and professional pedal sets as weil as being compatible with all major wheel and pedals including Thrustmaster®, Logitech® and Fanatec®.

Features:

• Steering wheel angle and distance adjustability. Pedal angle and distance adjustbility
• Gear shifter distance adjustable
• Pre-drilled for all major brands including Thrustmaster®, Logitech® and Fanatec®
• Built with rigidity to support direct drive wheels and professional pedal sets
• Built with motion in mind - The Next Level Racing® Motion Platform V3 bolts straight on in less than 10 minutes and fully compatible with the Next Level Racing® Traction+ Motion Platform
• lncluded handbrake support for both Thrustmaster® and Fanatec® handbrakes
• Buttkicker Gamer 2 Adapter
• Height adjustable rubber feet and Next Level Racing® Lockable Wheel Gastors
• Box dimensions 100 x 61 x 59 cm - 60 kg