Force2Motion Ready2Race and Bundles

Force2Motion Ready2Race and Bundles
Force2Motion Ready2Race and Bundles

In the category "Ready2Race-Bundles (Ready-To-Race-Bundles)" you will find bundles of useful single items, Built-To-Order-Packages, which contain e.g. a PC and are already nearly complete, as well as real complete packages, with which you can start Sim-Racing immediately (just "Ready-to-Race"). Then it says: Just buy and install the desired simulation (mostly via Steam) and start racing. If the package contains a PC, we will install and preconfigure all necessary drivers for the hardware included in the package (e.g. motion systems and controllers). In extreme cases, all that remains for you to do is "unpack, assemble and race" (well, almost ;-)). As an option we also offer the complete installation on site at your location.

Please use the opportunity to test the systems in our showroom and let us advise you!
 
System consulting and private test Showroom Force2Motion
TOP
System consulting and private test Showroom Force2Motion
System consulting and private test showroom Force2Motion

Testing in the showroom for a fee

We usually keep a considerable amount of very expensive equipment in our showroom for testing and trying out. In recent years, we have constantly expanded some of the cockpits or completely replaced them with newer developments. This costs and ties up a lot of money and the test systems are later sold at a considerable discount.
In order to maintain the high quality of advice and the possibility of testing various cockpits, motion systems and add-ons, we are unfortunately forced to charge a small flat rate for private testing in the showroom from 1 May 2024. The test fee of €100.00 incl. VAT will be offset against a later purchase with a value of goods of at least €1,000 incl. VAT (please note different conditions for system consulting at racing event centres and commercial solutions). In the end, the test was free of charge, but never for nothing. Because even if you come to the conclusion after a test here on site that none of the solutions really work for you, that's okay. Like us, you have invested time and money in the visit, but you have avoided an expensive bad purchase.

Do you have a commercial idea relating to sim racing? Then please note the conditions for a system consultation in this area via this service article.
100,00 EUR
incl. 19% tax excl. Shipping costs
Set:
 
Next Level Racing Motion Platform V3
TOP
Next Level Racing Motion Platform V3
Next Level Racing Motion Platform V3 - WEEE-Reg.-Nr. DE 11344112

Attention: for options and accessories also see the alternative article "Next Level Racing Motion Platform V3 - KIT"!
  • Next Level Racing® V3 Motion Platform
  • Next Level Racing® Platform Manager Software (Download)
  • USB cable
  • Power cable
  • Steel side panels to directly bolt on to your Next Level Racing® GTultimate Cockpit, Next Level Flight Simulator or retrofit to your existing cockpit
  • Manual (english)
3.999,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Next Level Racing Traction Plus
TOP
-4%
Next Level Racing Traction Plus (Cockpit-Mover)
Next Level Racing Traction Plus (Cockpit-Mover)

(see also alternative article Next Level Racing Traction Plus - KIT for options)

Breathtaking realism and performance, incredible immersion and precision, superb technology, engineering and manufacturing…introducing the Next Level Racing® Traction Plus Motion Platform.

The Traction Plus combined with the Next Level Racing® Motion Platform V3 provides incredible levels of vehicle feedback to the driver to feel exactly what the vehicle is doing by precisely delivering
  • Sway
  • Surge
  • Roll
  • Pitch
  • Understeer and front traction loss – (critical feature usually only experienced in 6DOF motion platforms)
  • Oversteer and rear traction loss
  • Power slides and drifting                                                                          
  • Partial Heave                                                                                                                                     
  • Vehicle and Road effects such as road surface, bumps, wheel lock/spin, gear changes and more
  • Shunting effects (to feel side impact contact from opponents/wall)
What’s in The Box
  • Next Level Racing® Traction Plus Motion Platform
  • Next Level Racing® Platform Manager software download
  • USB and power cables including ferrite core
  • Nuts and Bolts required for assembly
  • Product Manual
  • Adaptor plates to bolt your Next Level Racing® GTtrack or Next Level Racing® Flight Simulator Pro cockpit (coming 2019) directly to the Traction Plus platform
  • Digital assembly instructions and assembly videos available here
Compatible Products
  • Next Level Racing GTtrack
  • Next Level Racing Flight Simulator Pro (coming 2019)
  • Next Level Racing Motion Platform V3 (Traction Plus is designed to combine with the V3 motion platform to provide a ground breaking motion simulator experience)
  • Other brand or DIY cockpits - As we experienced with the Motion Platform V3, many customers also have the ability to create custom adaption to their cockpit and with the Traction Plus we expect to see the same with mounting holes on top of the platform that users can adapt to use with their own cockpit.
  • As with the Motion Platform V3 we do plan to release adaptors for other brand of cockpits
Compatible Operating System

The Platform Manager works only (!) with a Microsoft® Windows Operating System. So you will definitly need a Windows PC. No support for consoles like Xbox® or Playstation®!

Please note:
PC, V3, Cockpit, Games, Monitor, Monitorstands, Carpet, Controls etc. shown on the pictures are not included. 
Only 6.599,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Next Level Racing GTtrack Cockpit
TOP
-11%
Next Level Racing GTTrack Cockpit
Next Level Racing GTTrack Cockpit

The GTtrack is the ultimate cockpit for serious sim racers looking for rigidity, complete adjustability and a true race car seating position. The GTtrack was designed with the close feedback of professional drivers and some of the world's fastest eSports drivers to give you every feature required for serious sim racing. The complete rigidity of the GTtrack allows it to support direct drive wheels and professional pedal sets as weil as being compatible with all major wheel and pedals including Thrustmaster®, Logitech® and Fanatec®.

Features:
  • Steering wheel angle and distance adjustability. Pedal angle and distance adjustbility
  • Gear shifter distance adjustable
  • Pre-drilled for all major brands including Thrustmaster®, Logitech® and Fanatec®
  • Built with rigidity to support direct drive wheels and professional pedal sets
  • Built with motion in mind - The Next Level Racing® Motion Platform V3 bolts straight on in less than 10 minutes and fully compatible with the Next Level Racing® Traction+ Motion Platform
  • lncluded handbrake support for both Thrustmaster® and Fanatec® handbrakes
  • Buttkicker Gamer 2 Adapter
  • Height adjustable rubber feet and Next Level Racing® Lockable Wheel Gastors
  • Box dimensions 100 x 61 x 59 cm - 60 kg
Only 799,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Next Level Racing® Flight Simulator Cockpit
TOP
Next Level Racing® Flight Simulator Cockpit
Next Level Racing® Flight Simulator Cockpit

LEADING FEATURES
  • Dedicated flight cockpit for maximum simulation immersion
  • Suited for Combat flight, General Aviation, Commercial flight, and Space Exploration users
  • Compatible with flight electronics such as yokes, joysticks, rudders, and throttles for all major brands
  • Wide range of adjustments to tailor your flight experience
  • Includes keyboard and mouse support for easy navigation with custom Next Level Racing® keyboard and mouse pads
  • Compatible with Thrustmaster® / Logitech / Saitek® / Honeycomb/ Virtual Fly/ Crosswind and other flight accessory brands
  • Includes Buttkicker® Adaptor, Next Level Racing® Four-point harness, and Lumber Support
  • Motion Compatible with added accessories**
**To make the Next Level Racing® Flight Simulator Cockpit range motion compatible, users will require the Next Level Racing® Motion Plus Platform Adaptor. 
 
 
899,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Next Level Racing® Flight Simulator Cockpit - BOEING COMMERCIAL EDITION
TOP
Next Level Racing® Flight Simulator Cockpit - BOEING COMMERCIAL EDITION
Next Level Racing® Flight Simulator Cockpit - BOEING COMMERCIAL EDITION

LEADING FEATURES
  • Dedicated flight cockpit for maximum simulation immersion
  • Suited for Combat flight, General Aviation, Commercial flight, and Space Exploration users
  • Compatible with flight electronics such as yokes, joysticks, rudders, and throttles for all major brands
  • Wide range of adjustments to tailor your flight experience
  • Includes keyboard and mouse support for easy navigation with custom Next Level Racing® keyboard and mouse pads
  • Compatible with Thrustmaster® / Logitech / Saitek® / Honeycomb/ Virtual Fly/ Crosswind and other flight accessory brands
  • Includes Buttkicker® Adaptor, Next Level Racing® Four-point harness, and Lumber Support
  • Motion Compatible with added accessories**
**To make the Next Level Racing® Flight Simulator Cockpit range motion compatible, users will require the Next Level Racing® Motion Plus Platform Adaptor.
899,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Next Level Racing® Flight Simulator Cockpit - BOEING MILITARY EDITION
TOP
Next Level Racing® Flight Simulator Cockpit - BOEING MILITARY EDITION
Next Level Racing® Flight Simulator Cockpit - BOEING MILITARY EDITION

LEADING FEATURES
  • Dedicated flight cockpit for maximum simulation immersion
  • Suited for Combat flight, General Aviation, Commercial flight, and Space Exploration users
  • Compatible with flight electronics such as yokes, joysticks, rudders, and throttles for all major brands
  • Wide range of adjustments to tailor your flight experience
  • Includes keyboard and mouse support for easy navigation with custom Next Level Racing® keyboard and mouse pads
  • Compatible with Thrustmaster® / Logitech / Saitek® / Honeycomb/ Virtual Fly/ Crosswind and other flight accessory brands
  • Includes Buttkicker® Adaptor, Next Level Racing® Four-point harness, and Lumber Support
  • Motion Compatible with added accessories**
899,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Ready-To-Race-Bundle Built-To-Order
TOP
Force2Motion Ready-To-Race-Bundle Built-To-Order
Force2Motion Ready-To-Race-Bundle Built-To-Order

With this configurator you could put together a complete sim-racing-cockpit including PC by simply removing the options you don't want from the shopping cart. Attention: The bundle contains alternative items from which you have to choose!

If you have any questions, please call (+49 (0)2405/479490) or write an e-mail (service@force2motion.de).

Alternative configurations as well as upgrades and extensions with additional items are possible.

Assembly time: The complete assembly of the beast takes 2-3 days if you know what you are doing and read and understand the manual. If you don't feel like reading our manual (please download and read under "Documents" before buying) and the manuals for the individual products, have two left hands or are simply too impatient, then please use our assembly service (conditions on request) or leave the kit alone! This prevents frustration on both sides ;-) !
1,00 EUR
incl. 19% tax excl. Shipping costs
Set:
 
Force2Motion 8DOF - Motion-Simulator -
TOP
Force2Motion 8DOF - Motion-Simulator - "The Beast - NLR-Edition" (Seat-Mover and Cockpit-Mover)
Force2Motion 8DOF - Motion-Simulator - "The Beast - NLR-Edition" (Seat-Mover and Cockpit-Mover)
 
The ultimate combination of Seat-Mover and Full-Motion-Cockpit with Traction Loss

Attention: This is a bundle, which only consists of Cockpit and the required motion systems incl. adapter. You need an additional PC, monitor(s), pedals etc. There is a Built-To-Order article in the shop, which contains all possible options you can add or remove.
 
Our innovative Force2Motion 8DOF cockpit, exclusively manufactured in this combination, combines the GTTrack cockpit with Motion Platform V3 (Seat Mover) and the Traction Plus system (for oversteer and understeer effects) from Next Level Racing with the Cockpit Mover based on the ProSimu T1000 4M. As the "cream on top", a butt kicker is mounted, which transfers the vibrations from the engine, speed limiter and curb effects tactilely into the seat and thus onto the driver's body.
 
This turns the system into the ultimate racing and/or flying cockpit with 8 DOF. This product idea arose from the idea of putting together a complete cockpit with all conceivable options for our showroom in order to show our customers the respective effects of the individual motion systems on one system. After we had gained sufficient experience with the prototype, we completely redesigned the adapter system for combining the two worlds and had it manufactured in Germany. The adapter system is so modular that it is 100% compatible with the Next Level Racing Traction Plus system and can therefore be installed as an add-on between the GTTrack cockpit and Traction Plus. The adapter system can also be used to mount other cockpits than the GTTrack on the Next Level Racing Traction Plus system. For example, there is already an aluminium plate pre-drilled for RSeat RS1 and S1 cockpits, which can of course also be used for other cockpits and do-it-yourself projects by drilling appropriate holes.
 
The Beast: All-In-On for testing in our showroom

Fast Facts:
  • Cockpit with 4DOF plus Next Level Racing Motion Platform (Seat-Mover) with 2 DOF and Traction Plus (2 DOF)
  • 8 actuators plus Buttkicker
  • NLR GTTrack cockpit with seat adjustment
  • Racing seat (standard NLR - optional at extra charge ProSimu racing shell rigid)
  • Safety belts
  • Force2Motion adapter systems (optionally with or without mounting plate for third-party cockpits)
  • All necessary electronics, cables and screws including cables (power supply, signal converter USB)
  • Plastic housing and steel/alu frame
  • Very resistant paint (colour powder heated to 200 ° C on the structure)
  • Made of square tubes, ultra-precise laser cutting, allows maximum rigidity.
  • Compatible with many accessories and devices: Thrustmaster, Fanatec etc. (not included)
  • Power supply: Standard Schuko plug 110-240V - Power consumption approx. 500 Watt
  • Space requirements (footprint): length approx. 200 cm x width 120 cm (+ space for entry) x height 170 cm (upper edge of seat) - available width between actuators: 64 cm (max. cockpit width)
  • Weight (without cockpit, motion platforms and controls):
    • Static adapter incl. actuator holder and screws: 9.2 kg
    • Dynamic adapter incl. screws (without actuators): 8.5 kg
    • Actuators per piece: 8,3 kg
    • Adapter plate (optional): 6.8 kg
    • The recommended driver weight is 80-100 kg (depending on the equipment of the overall cockpit - official payload of the Traction Plus System is 235 kg)
  • Supported Games: Details see Simtools and Platform-Manager
    • Software is constantly updated as new games are released; Not every software title is equally well supported by every motion system.
    •  
  • Assembly time: The complete assembly of the beast takes 2-3 days if you know what you are doing and read and understand the manual. If you don't feel like reading our manual (please download and read under "Documents" before buying) and the manuals for the individual products, have two left hands or are simply too impatient, then please use our assembly service (conditions on request) or leave the kit alone! This prevents frustration on both sides ;-) !
21.999,00 EUR
incl. 19% tax excl. Shipping costs
Force2Motion 8DOF - Motion-Simulator -
NEW
TOP
Force2Motion Bundle Qubic Systems BT1
Force2Motion Bundle Qubic Systems BT1

The bundle contains: Price advantage when ordering all four items without modification in the basket!
Only 2.275,00 EUR
incl. 19% tax excl. Shipping costs
FForce2Motion 8DOF - Motion-Simulator - The Beast - Fanatec Edition (Seat-Mover and Cockpit-Mover)
TOP
Force2Motion 8DOF - Motion-Simulator - The Beast - Fanatec Edition (Seat-Mover and Cockpit-Mover) - Kopie
Force2Motion 8DOF - Motion Simulator - The Beast - FGT Elite Edition (Seat-Mover and Cockpit-Mover)

The ultimate combination of Seat-Mover and Full-Motion-Cockpit with Traction Loss

Attention: This is a bundle which only consists of the cockpit and the necessary motion systems incl. adapters. You also need a PC, monitor(s), pedals etc.. For this purpose, there is a Built-To-Order article in the shop that contains all possible options that you can add or remove.

With the new FGT ELITE cockpit from Next Level Racing we have now found the third basis for our "Beast". Due to its construction with high-quality aluminium profiles, it fulfils several requirements that we have for a cockpit that is to be modularly expanded into a fully movable motion system:
  • High quality and stability
  • Accurate fit and a wide range of adjustment possibilities
  • Modularity
  • Compatibility with the Motion Platform V3 and the Traction Plus System as well as the ProSimu System

Assembly time: The complete assembly of the beast takes 2-3 days if you know what you are doing and read and understand the manual. If you don't feel like reading our manual (please download and read under "Documents" before buying) and the manuals for the individual products, have two left hands or are simply too impatient, then please use our assembly service (conditions on request) or leave the kit alone! This prevents frustration on both sides ;-) !
22.573,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Force2Motion 8DOF - Motion-Simulator - The Beast - Fanatec Edition (Seat-Mover and Cockpit-Mover)
TOP
Force2Motion 8DOF - Motion-Simulator - The Beast - Fanatec Edition (Seat-Mover and Cockpit-Mover)
Force2Motion 8DOF - Motion-Simulator - "The Beast - Fanatec Edition" (Seat-Mover and Cockpit-Mover)
 
The ultimate combination of Seat-Mover and Full-Motion-Cockpit with Traction Loss

Attention: This is a bundle, which only consists of Cockpit and the required motion systems incl. adapter. You need an additional PC, monitor(s), pedals etc. There is a Built-To-Order article in the shop, which contains all possible options you can add or remove.
 
Our innovative Force2Motion 8DOF cockpit, exclusively manufactured in this combination, combines the Fanatec Clupsport V2 Cockpit with Motion Platform V3 (Seat Mover) and the Traction Plus system (for oversteer and understeer effects) from Next Level Racing with the Cockpit Mover based on the ProSimu T1000 4M. As the "cream on top", a butt kicker is mounted, which transfers the vibrations from the engine, speed limiter and curb effects tactilely into the seat and thus onto the driver's body.
 
This turns the system into the ultimate racing and/or flying cockpit with 8 DOF. This product idea arose from the idea of putting together a complete cockpit with all conceivable options for our showroom in order to show our customers the respective effects of the individual motion systems on one system. After we had gained sufficient experience with the prototype, we completely redesigned the adapter system for combining the two worlds and had it manufactured in Germany. The adapter system is so modular that it is 100% compatible with the Next Level Racing Traction Plus system and can therefore be installed as an add-on between the Fanatec Clupsport V2 Cockpitt and Traction Plus. The adapter system can also be used to mount other cockpits on the Next Level Racing Traction Plus system.
 
The Beast: All-In-On for testing in our showroom (see here the NLR-Version)

Fast Facts:
  • Fanatec Clupsport V2 Cockpit with 4DOF plus Next Level Racing Motion Platform (Seat-Mover) with 2 DOF and Traction Plus (2 DOF)
  • 8 actuators plus Buttkicker
  • Fanatec Clupsport V2 Cockpit cockpit with seat adjustment and Force2Motion-Adaptersystem
  • Racing seat
  • Safety belts
  • Force2Motion adapter systems Size X
  • All necessary electronics, cables and screws including cables (power supply, signal converter USB)
  • Plastic housing and steel/alu frame
  • Very resistant paint (colour powder heated to 200 ° C on the structure)
  • Made of square/round tubes, ultra-precise laser cutting, allows maximum rigidity.
  • Compatible with many accessories and devices: Thrustmaster, Fanatec etc. (not included)
  • Power supply: Standard Schuko plug 110-240V - Power consumption approx. 500 Watt
  • Space requirements (footprint): length approx. 200 cm x width 120 cm (+ space for entry) x height 170 cm (upper edge of seat) - available width between actuators: 64 cm (max. cockpit width)
  • Weight (without cockpit, motion platforms and controls):
    • Static adapter incl. actuator holder and screws: 9.2 kg
    • Dynamic adapter incl. screws (without actuators): 8.5 kg
    • Actuators per piece: 8,3 kg
    • Adapter plate (optional): 6.8 kg
    • The recommended driver weight is 80-100 kg (depending on the equipment of the overall cockpit - official payload of the Traction Plus System is 235 kg)
  • Supported Games: Details see Simtools and Platform-Manager
    • Software is constantly updated as new games are released; Not every software title is equally well supported by every motion system.

Assembly time: The complete assembly of the beast takes 2-3 days if you know what you are doing and read and understand the manual. If you don't feel like reading our manual (please download and read under "Documents" before buying) and the manuals for the individual products, have two left hands or are simply too impatient, then please use our assembly service (conditions on request) or leave the kit alone! This prevents frustration on both sides ;-) !
24.722,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Force2Motion 8DOF - Motion-Simulator - Built-to-Order
TOP
Force2Motion 8DOF - Motion-Simulator - Built-to-Order "The Beast"
Force2Motion 8DOF - Motion-Simulator - Built-to-Order "The Beast"

Important note: The product Next Level Racing Traction Plus was discontinued by the manufacturer at the beginning of February 2024 completely unexpectedly and without any prior notice.
We are working on obtaining remaining stocks so that we can still equip some of our "Beast"(s) with it. Therefore, these Traction Plus systems are only available in combination with our Beast or complete systems with adapters. Please contact us for specific delivery options. And don't wait too long before you decide to buy one of these Beasts. It will be many months before we have developed a replacement for the NLR Traction Plus system ourselves.
 
The ultimate combination of Seat-Mover and Full-Motion-Cockpit with Traction Loss

Attention: Do not be put off by the price shown! This bundle contains all possible options and combinations you can choose from. The actual price will be significantly lower after your selection in the shopping cart!
 
Our innovative Force2Motion 8DOF cockpit, exclusively manufactured in this combination, combines the GTTrack cockpit with Motion Platform V3 (Seat Mover) and the Traction Plus system (for oversteer and understeer effects) from Next Level Racing with the Cockpit Mover based on the ProSimu T1000 4M. As the "cream on top", a butt kicker is mounted, which transfers the vibrations from the engine, speed limiter and curb effects tactilely into the seat and thus onto the driver's body.
 
This turns the system into the ultimate racing and/or flying cockpit with 8 DOF. This product idea arose from the idea of putting together a complete cockpit with all conceivable options for our showroom in order to show our customers the respective effects of the individual motion systems on one system. After we had gained sufficient experience with the prototype, we completely redesigned the adapter system for combining the two worlds and had it manufactured in Germany. The adapter system is so modular that it is 100% compatible with the Next Level Racing Traction Plus system and can therefore be installed as an add-on between the GTTrack cockpit and Traction Plus. The adapter system can also be used to mount other cockpits than the GTTrack on the Next Level Racing Traction Plus system. For example, there is already an aluminium plate pre-drilled for RSeat RS1 and S1 cockpits, which can of course also be used for other cockpits and do-it-yourself projects by drilling appropriate holes.
 
Fast Facts:
  • Cockpit with 4DOF plus Next Level Racing Motion Platform (Seat-Mover) with 2 DOF and Traction Plus (2 DOF)
  • Up to 8 actuators plus Buttkicker
  • NLR GTTrack cockpit with seat adjustment
  • Racing seat (standard NLR - optional at extra charge ProSimu racing shell rigid)
  • Safety belts
  • Option: Force2Motion adapter systems (optionally with or without mounting plate for third-party cockpits)
1,00 EUR
incl. 19% tax excl. Shipping costs
Force2Motion 4 DOF ProSimu Kit 100mm with F2M adapter system for NLR Traction Plus - Size L (980 mm width)
TOP
-11%
Force2Motion 4 DOF ProSimu Kit 100mm with F2M adapter system for NLR Traction Plus - Size L (980 mm width)
Force2Motion 4 DOF ProSimu Kit 100mm with F2M adapter system for NLR Traction Plus - Size L (980 mm width)
  • ProSimu actuator set with 4x 100 mm stroke and control unit and Simtools software
  • Force2Motion adapter system ("The Beast") to copy the ProSimu actuators with the Next Level Racing GTTrack cockpit and Traction Plus system
Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!
Observe maximum weights: The Next Level Racing Traction Plus System has a maximum payload of 235 kg. The Next Level Racing Motion Platform V3 allows a max. payload of 130 kg (incl. seat and seat-mounted accessories). Therefore, make sure that you do not exceed both values. The total weight of the cockpit depends on the accessories (controls) you have mounted and the driver's weight. Depending on the configuration, we recommend not exceeding the driver's face of 100 kg.
 
Only 9.999,00 EUR
incl. 19% tax excl. Shipping costs
Set:
 
Force2Motion Adapter-System for NLR Traction Plus - Size L (980mm width)
TOP
Force2Motion Adapter-System for NLR Traction Plus - Size L (980mm width)
Force2Motion Adapter-System for NLR Traction Plus - Size L (980mm width)
  • Force2Motion adapter system ("The Beast") to combine the ProSimu actuators with the Next Level Racing GTTrack cockpit and Traction Plus system
  • Without Actors!
Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!
2.990,00 EUR
incl. 19% tax excl. Shipping costs
Force2Motion Adapter-System Dynamic for NLR Traction Plus (Add-On) - Size L (980 mm width)
TOP
Force2Motion Adapter-System Dynamic for NLR Traction Plus (Add-On) - Size L (980 mm width)
Force2Motion Adapter-System Dynamic for NLR Traction Plus (Add-On) - Size L (980 mm width)
  • Force2Motion adapter system Dynamic for mounting of cockpits (third party manufacturers, self-made) on the Next Level Racing Traction Plus system
  • This is an expansion set for the static Force2Motion-Adapter to upgrade it to a complete adapter system
  • Without actuators and Traction Plus System!
With the static adapter it is possible to mount different cockpits on the Traction Plus System. The adapter is based on the Force2Motion adapter system "The Beast" and can be extended by purchasing the 4 DOF actuator set to get additional 4 DOF and move the whole cockpit.

Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!
 
1.800,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Force2Motion Adapter-System Static for NLR Traction Plus - Size S (880mm width)
TOP
Force2Motion Adapter-System Static for NLR Traction Plus - Size S (880mm width)
Force2Motion Adapter-System Static for NLR Traction Plus - Size S (880mm width)
  • Force2Motion adapter system Static for mounting cockpits (third party, self-built) on the Next Level Racing Traction Plus system
  • Without actuators and Traction Plus System!

With the static adapter it is possible to mount different cockpits on the Traction Plus System. The adapter is based on the Force2Motion adapter system "The Beast" and can be extended to the complete Force2Motion adapter system by purchasing the extension set to get additional 4 DOF and move the whole cockpit.

Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!
 
1.190,00 EUR
incl. 19% tax excl. Shipping costs
Force2Motion Adapter-System Static for NLR Traction Plus - Size L (980mm width)
TOP
Force2Motion Adapter-System Static for NLR Traction Plus - Size L (980mm width)
Force2Motion Adapter-System Static for NLR Traction Plus - Size L (980mm width)
  • Force2Motion adapter system Static for mounting cockpits (third party, self-built) on the Next Level Racing Traction Plus system
  • Without actuators and Traction Plus System!

With the static adapter it is possible to mount different cockpits on the Traction Plus System. The adapter is based on the Force2Motion adapter system "The Beast" and can be extended to the complete Force2Motion adapter system by purchasing the extension set to get additional 4 DOF and move the whole cockpit.

Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!
 
1.000,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Force2Motion Adapter-System RSeat-Edition S1 for NLR Traction Plus
TOP
Force2Motion Adapter-System RSeat-Edition S1 for NLR Traction Plus
Force2Motion Adapter-System RSeat-Edition S1 for NLR Traction Plus

With the Force2Motion adapter system RSeat-Edition it is possible to mount the Rseat S1 cockpit on the Traction Plus system.

Scope of delivery:
  • 2x side member for static adapter in black fine structure (SF).
  • 2x Cross member static in size R (for Rseat) in black fine structure (SF)
  • 1x Cockpit support crosswise for S1 in black fine structure (SF)
  • 2x spacer sleeves for cockpit on cross member
  • 4x sealing plugs 80x80 in black
  • All necessary screws
  • German manual
  • Without cockpit, Traction Plus System etc.
  • Weight: approx. 15 kg
Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. Assembly requires manual skills and tools (ratchet set, Allen key, open-end spanner set, etc.). When assembling the system, make sure that the total load of all components including the driver does not exceed the maximum payload of the NLR Traction Plus System of 235 kg.
499,00 EUR
incl. 19% tax excl. Shipping costs
Force2Motion Adapter-System RSeat-Edition N1 for NLR Traction Plus
TOP
-62%
Force2Motion Adapter-System RSeat-Edition N1 for NLR Traction Plus
Force2Motion Adapter-System RSeat-Edition N1 for NLR Traction Plus

With the Force2Motion adapter system RSeat-Edition it is possible to mount the Rseat N1 cockpit on the Traction Plus system.

Scope of delivery:
  • 2x side member for static adapter in black fine structure (SF).
  • 2x Cross member static in size R (for Rseat) in black fine structure (SF)
  • 4x sealing plugs 80x80 in black
  • All necessary screws
  • German manual
  • Without cockpit, Traction Plus System etc.
  • Weight: approx. 15 kg
Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. Assembly requires manual skills and tools (ratchet set, Allen key, open-end spanner set, etc.). When assembling the system, make sure that the total load of all components including the driver does not exceed the maximum payload of the NLR Traction Plus System of 235 kg.
Only 499,00 EUR
incl. 19% tax excl. Shipping costs
Force2Motion Adapter-System RSeat-Edition RS1 for NLR Traction Plus
TOP
Force2Motion Adapter-System RSeat-Edition RS1 for NLR Traction Plus
Force2Motion Adapter-System RSeat-Edition RS1 for NLR Traction Plus

With the Force2Motion adapter system RSeat-Edition it is possible to mount the Rseat RS1 cockpit on the Traction Plus system.

Scope of delivery:
  • 2x side member for static adapter in black fine structure (SF).
  • 2x Cross member static in size R (for Rseat) in black fine structure (SF)
  • 2x Cockpit support crosswise for S1 in black fine structure (SF)
  • 4x sealing plugs 80x80 in black
  • All necessary screws
  • German manual
  • Without cockpit, Traction Plus System etc.
  • Weight: approx. 15 kg
Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. Assembly requires manual skills and tools (ratchet set, Allen key, open-end spanner set, etc.). When assembling the system, make sure that the total load of all components including the driver does not exceed the maximum payload of the NLR Traction Plus System of 235 kg.
499,00 EUR
incl. 19% tax excl. Shipping costs
Force2Motion Adapter-System Dynamic for NLR Traction Plus (Add-On) - Size S (880 mm width)
TOP
Force2Motion Adapter-System Dynamic for NLR Traction Plus (Add-On) - Size S (880 mm width)
Force2Motion Adapter-System Dynamic for NLR Traction Plus (Add-On) - Size S (880 mm width)
  • Force2Motion adapter system Dynamic for mounting of cockpits (third party manufacturers, self-made) on the Next Level Racing Traction Plus system
  • This is an expansion set for the static Force2Motion-Adapter to upgrade it to a complete adapter system
  • Without actuators and Traction Plus System!
With the static adapter it is possible to mount different cockpits on the Traction Plus System. The adapter is based on the Force2Motion adapter system "The Beast" and can be extended by purchasing the 4 DOF actuator set to get additional 4 DOF and move the whole cockpit.

Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!
 
1.995,00 EUR
incl. 19% tax excl. Shipping costs
Fanatec Clubsport Cockpit V2 - Modified for ForceMotion Beast
TOP
Fanatec Clubsport Cockpit V2 - Modified for ForceMotion Beast "Fanatec Edition"
Fanatec Clubsport Cockpit V2 - Modified for ForceMotion Beast "Fanatec Edition".

The new racing cockpit - Better than ever before! You will be thrilled by the improvements in stability and adjustability and will significantly increase your driving fun on the track.

The cockpit offered here is a modified version (pre-drilled) for mounting on the Force2Motion adapter system.
1.149,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Force2Motion 4 DOF ProSimu Kit 100mm
TOP
Force2Motion 4 DOF ProSimu Kit 100mm
Force2Motion 4 DOF ProSimu Kit 100mm
  • ProSimu actuator set with 4x 100 mm stroke and control unit and Simtools software
  • WITHOUT Force2Motion adapter system ("The Beast")
Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!
8.399,00 EUR
incl. 19% tax excl. Shipping costs
Set:
 
F2M Step Protection Traction Plus
TOP
F2M Step Protection Traction Plus
F2M Step Protection Traction Plus

The USB connector on the NLR Traction Plus is positioned in a strategically unfavourable place and there is a risk that when getting in or out of the cockpit, you may accidentally step on or against the connector and shear it off. In the worst case, this can result in damage to the mainboard of the centre unit.

The step protection consists of a U-profile made of 2mm steel powder-coated in black fine structure, which is clipped onto a spacer that is fixed to the Traction Plus centre module with double-sided adhesive tape by means of a magnet integrated there. A USB cable AB 3m with a USB device plug angled downwards completes the set.
149,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
R2R-Addon Force2Motion Gaming PC Standard
TOP
R2R-Addon Force2Motion Gaming PC Standard
Force2Motion Gaming PC (Tower or Mini-Tower) - Standard (Mid-Range)
  •  Intel® Core™ i7 >= 3.6 GHZ
  •  32 GB RAM
  •  1 TB SSD
  •  USB 3.0
  •  NVIDIA GeForce RTX 4070 graphics, HDMI, DisplayPort; or similar
  •  Form factor: Tower black
  •  Giga LAN, WLAN
  •  Windows 11 Home 64 bit
  •  Quiet fans
  •  2 years warranty (pick-up and return)
  •  Installation language German (other languages on request)
  •  preinstalled with all included drivers (ready to play)
Attention: This is an article which is only sold in connection with Ready-To-Race-Bundles. No single delivery!

Please note: We install quiet running fans from the company BeQuiet and others. Nevertheless, an increased fan noise can occur during intensive performance use in simulations/games, because CPU and graphic cards have to be cooled sufficiently.

Note: Due to the new graphics card generation from Nvidia, the availability of the new series is severely limited and a reliable delivery time statement is not possible. Please contact us for specific questions / orders.
2.990,00 EUR
incl. 19% tax excl. Shipping costs
R2R-Addon Force2Motion Gaming PC High-End
TOP
R2R-Addon Force2Motion Gaming PC High-End
Force2Motion Gaming PC (Tower or Mini-Tower) - High-End
  •  Intel® Core™ i9 >= 3.0 GHZ
  •  64 GB RAM
  •  2 TB SSD
  •  USB 3.0
  •  NVIDIA GeForce RTX 4090 graphics, DVI, DisplayPort; or similar product
  •  Form factor: Tower black or silver,
  •  Giga LAN, WLAN
  •  DVD Drive (external)
  •  PCI USB Card with 4 additional USB-Ports or ext. HUB
  •  Windows 11 Home 64 bit
  •  Quiet fans
  •  2 years warranty (pick-up and return)
  •  Installation language German (other languages on request)
  •  preinstalled with all included drivers (ready to play)
Attention: This is an article which is only sold in connection with Ready-To-Race-Bundles. No single delivery!

Please note: We install quiet running fans from the company BeQuiet and others. Nevertheless, an increased fan noise can occur during intensive performance use in simulations/games, because CPU and graphic cards have to be cooled sufficiently.


 
4.690,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
R2R-Addon emergency stop switch for Sim-platforms
TOP
R2R-Addon emergency stop switch for Sim-platforms
R2R-Addon emergency stop switch for Sim-platforms 2x power cold devices plus emergency stop ProSimu (if included) incl. mounting bracket

With the mushroom head slater you can mount the power supply of the Motion Platform comfortably and easily accessible on the cockpit. The emergency stop switch can be switched on and off during the running simulation and the Motion Platform switches on and off during the running game.

Attention: We offer this article, which is individually assembled, only in connection with cockpits, motion platforms and racing simulators purchased from us. No sale to customers who have not purchased simulators from us.

What's included:
  • F2M adapter bracket in black satin powder-coated with screws for mounting on the cockpit.
  • 3x emergency stop switch wired with safety plug and 3x power cable (for terminal devices)
  • Mount option for ProSimu emergency stop switch (included with ProsSimu system)
  • Manual

Assembly: The assembly is done by the customer himself. Since the switch is a current-carrying component (220V), the opening and assembly may only be carried out by trained personnel (electricians or similar). We accept no liability for damage caused by disregarding these instructions!
449,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
R2R-Addon Force2Motion Soundsystem 5.1 extern
TOP
R2R-Addon Force2Motion Soundsystem 5.1 extern
Force2Motion sound system 5.1 external
  • Sound system 5.1 from the brand manufacturer
  • Subwoofer, centre speaker, 4 satellite speakers on speaker stands or to mount at a tripple monitor stand (please tell us which to choose when ordering)
  • Control unit

Attention: This is an article which is only sold in connection with Ready-To-Race-Bundles. No single delivery!
399,00 EUR
incl. 19% tax excl. Shipping costs
Set:
 
R2R-Addon Force2Motion 55
TOP
R2R-Addon Force2Motion 55" Monitor Gaming-Entry
Force2Motion Monitor 55" Smart TV
  • Branded device of a well-known manufacturer
  • Gaming Entry Class
  • incl. HDMI or DP cable
Attention: This is an article which is only sold in connection with Ready-To-Race-Bundles. No single delivery!
699,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
R2R-Addon Force2Motion 55
TOP
R2R-Addon Force2Motion 55" Monitor Gaming-Top OLED
Force2Motion Monitor 55" Smart TV "Gaming-Top" OLED
  • Branded device of a well-known manufacturer OLED
  • Gaming Top Class
  • incl. HDMI or DP cable
Attention: This is an article which is only sold in connection with Ready-To-Race-Bundles. No single delivery!
1.490,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
R2R-Addon Headset Surround
TOP
R2R-Addon Headset Surround
R2R-Addon Headset Surround

Attention: This is an article which is only sold in connection with Ready-To-Race-Bundles. No single delivery!
89,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
1 to 32 (from a total of 103)