Force2Motion Products

DEMO system from showroom: Force2Motion 8DOF - Motion-Simulator - ‘The Beast - NLR-Edition’ (Seat-Mover and Cockpit-Mover)

Attention: This item is our used demo system from the showroom. The system has been used for demos, is in very good condition and comes with a two-year warranty for private use. The system will not be shipped and must be picked up on site with a suitable vehicle (delivery van). For an additional charge, we will deliver the system to you and set it up at your premises.

Why do we sell our demo system? There are two reasons: Firstly, NLR unexpectedly stopped selling the Traction Loss System in February 2024 and our stocks of this system are now exhausted. Secondly, ProSimu has also stopped selling its products via resellers overnight. We will therefore no longer be selling and promoting ProSimu products with immediate effect. It therefore no longer makes sense to keep our beast in this form in the showroom for testing and we are parting with our in-house development with a heavy heart. For you, this means the last chance to get hold of one of these beasts at an absolutely preferential price. We are giving a 50% discount on the last new price and at the same time we are granting a 2-year warranty for the entire system. Support for the Motion systems is also guaranteed by the manufacturer beyond the expiry of the warranty, as there are still many of these systems in use worldwide and the software will continue to be maintained independently of the Beast.

The ultimate combination of seat mover and full motion cockpit with traction loss

Our innovative and exclusive Force2Motion 8DOF cockpit combines the NLR GTTrack cockpit with Motion Platform V3 (seat mover) and the Traction Plus system (for oversteer and understeer effects) from Next Level Racing with the cockpit mover based on the ProSimu T1000 4M. The icing on the cake is a butt kicker that transmits the vibrations from the engine, rev limiter and curb effects tactilely to the seat and thus to the driver's body. This makes the system the ultimate racing and/or flight cockpit with 8 DOF.

Video gallery (excerpt) - you can find more videos in our You Tube channel



The beast: All-In-On for testing in our showroom

Fast Facts:

• Cockpit with 4DOF plus Next Level Racing Motion Platform (seat mover) with 2 DOF and Traction Plus (2 DOF)
• 8 actuators plus butt kicker
• NLR GTTrack cockpit with seat adjustment
• Racing seat (standard ERS3 NLR)
• Seat belts
• Force2Motion adapter system
• All necessary electronics, cables and screws including cables (power supply unit, signal converter USB)
• Plastic housing and steel or aluminium frame
• Very resistant paint (colour powder heated to 200 ° C on the structure)
• Made of square tube, ultra-precise laser cutting, allowing maximum rigidity.
• Compatible with many accessories and devices: Thrustmaster, Fanatec etc. (not included)
• Power supply: Standard Schuko plug 110-240V - power consumption approx. 1,000 watts
• Space requirement (footprint): Length approx. 200 cm x width 120 cm (+ space for entry) x height 170 cm (top edge of seat)
• The recommended rider weight is 80-100 kg (depending on the equipment of the overall cockpit - official payload of the Traction Plus System is 235 kg)
• Supported games: See SimRacingStudio and Platform Manager for details. The software is continuously updated as new games are released. Not every software title is equally well supported by every motion system.

Windows - PC required ! No support for Playstation, Xbox and other consoles! - Software (SimRacingStudio) included!

For details on the Next Level Motion platform, see the corresponding article description

Observe maximum weights: The Next Level Racing Traction Plus System has a permissible payload of 235 kg. The Next Level Racing Motion Platform V3 allows a maximum payload of 130 kg (incl. seat and seat-mounted accessories). Therefore, make sure that you do not exceed either value. The total weight of the cockpit depends on the accessories (controls) you have fitted and the weight of the driver. Depending on the configuration, we recommend that you do not exceed a rider weight of 100 kg.

The bundle contains the following individual items and options - (for details on the respective items, please click on the corresponding product links):

• Next Level Motion Platform V3
• Next Level Traction Plus System
• Force2Motion ProSimu 4 DOF system with Force2Motion adapter (fits directly onto Next Level Racing Traction Plus and GT Track)
• Buttkicker incl. control unit and external USB sound card
• Force2Motion cable management
• Emergency stop plate with 4x emergency stop buttons for individually switching off individual motion systems
• Force2Motion seat frame with central joystick mount and NLR Flight Pack
• Next Level Racing GT Track Cockpit with NLR ERS3 seat and safety harness

Attention: The controllers shown in the pictures (PC, Fanatec Wheelbase, Fanatec Steering Wheel, Fanatec Pedals and Bravo-Quadrant Flight Control incl. Streamdeck are not part of the bundle, but can be purchased separately (ask for offer). Monitors, monitor mounts, PC, keyboard and keyboard stand NOT included.

Force2Motion 8DOF - Motion Simulator - The Beast - FGT Elite Edition (Seat-Mover and Cockpit-Mover)

The ultimate combination of Seat-Mover and Full-Motion-Cockpit with Traction Loss

Attention: This is a bundle which only consists of the cockpit and the necessary motion systems incl. adapters. You also need a PC, monitor(s), pedals etc.. For this purpose, there is a Built-To-Order article in the shop that contains all possible options that you can add or remove.

With the new FGT ELITE cockpit from Next Level Racing we have now found the third basis for our "Beast". Due to its construction with high-quality aluminium profiles, it fulfils several requirements that we have for a cockpit that is to be modularly expanded into a fully movable motion system:

• High quality and stability
• Accurate fit and a wide range of adjustment possibilities
• Modularity
• Compatibility with the Motion Platform V3 and the Traction Plus System as well as the ProSimu System

Assembly time: The complete assembly of the beast takes 2-3 days if you know what you are doing and read and understand the manual. If you don't feel like reading our manual (please download and read under "Documents" before buying) and the manuals for the individual products, have two left hands or are simply too impatient, then please use our assembly service (conditions on request) or leave the kit alone! This prevents frustration on both sides ;-) !

Force2Motion 8DOF - Motion-Simulator - Built-to-Order "The Beast"

Important note: The product is no longer available in this form due to product discontinuation by the manufacturer. We are working on a replacement...
 
The ultimate combination of Seat-Mover and Full-Motion-Cockpit with Traction Loss

Attention: Do not be put off by the price shown! This bundle contains all possible options and combinations you can choose from. The actual price will be significantly lower after your selection in the shopping cart!
 
Our innovative Force2Motion 8DOF cockpit, exclusively manufactured in this combination, combines the GTTrack cockpit with Motion Platform V3 (Seat Mover) and the Traction Plus system (for oversteer and understeer effects) from Next Level Racing with the Cockpit Mover based on the ProSimu T1000 4M. As the "cream on top", a butt kicker is mounted, which transfers the vibrations from the engine, speed limiter and curb effects tactilely into the seat and thus onto the driver's body.
 
This turns the system into the ultimate racing and/or flying cockpit with 8 DOF. This product idea arose from the idea of putting together a complete cockpit with all conceivable options for our showroom in order to show our customers the respective effects of the individual motion systems on one system. After we had gained sufficient experience with the prototype, we completely redesigned the adapter system for combining the two worlds and had it manufactured in Germany. The adapter system is so modular that it is 100% compatible with the Next Level Racing Traction Plus system and can therefore be installed as an add-on between the GTTrack cockpit and Traction Plus. The adapter system can also be used to mount other cockpits than the GTTrack on the Next Level Racing Traction Plus system. For example, there is already an aluminium plate pre-drilled for RSeat RS1 and S1 cockpits, which can of course also be used for other cockpits and do-it-yourself projects by drilling appropriate holes.
 
Fast Facts:

• Cockpit with 4DOF plus Next Level Racing Motion Platform (Seat-Mover) with 2 DOF and Traction Plus (2 DOF)
• Up to 8 actuators plus Buttkicker
• NLR GTTrack cockpit with seat adjustment
• Racing seat (standard NLR - optional at extra charge ProSimu racing shell rigid)
• Safety belts
• Option: Force2Motion adapter systems (optionally with or without mounting plate for third-party cockpits)

Force2Motion Adapter-System Dynamic for NLR Traction Plus (Add-On) - Size L (980 mm width)

• Force2Motion adapter system Dynamic for mounting of cockpits (third party manufacturers, self-made) on the Next Level Racing Traction Plus system
• This is an expansion set for the static Force2Motion-Adapter to upgrade it to a complete adapter system
• Without actuators and Traction Plus System!

With the static adapter it is possible to mount different cockpits on the Traction Plus System. The adapter is based on the Force2Motion adapter system "The Beast" and can be extended by purchasing the 4 DOF actuator set to get additional 4 DOF and move the whole cockpit.

Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!
 

Force2Motion 4 DOF ProSimu Kit 100mm with F2M adapter system for NLR Traction Plus - Size X (1060mm width)

• ProSimu actuator set with 4x 100 mm stroke and control unit and Simtools software
• Force2Motion adapter system ("The Beast") to copy the ProSimu actuators with the Fanatec Clupsport V2 Cockpit (or similar) and Traction Plus system
• F2M Baseplate X for Fanatec Cockpit (Fanatec Cickpit not included)

Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!
Observe maximum weights: The Next Level Racing Traction Plus System has a maximum payload of 235 kg. The Next Level Racing Motion Platform V3 allows a max. payload of 130 kg (incl. seat and seat-mounted accessories). Therefore, make sure that you do not exceed both values. The total weight of the cockpit depends on the accessories (controls) you have mounted and the driver's weight. Depending on the configuration, we recommend not exceeding the driver's face of 100 kg.
 

Force2Motion Adapter Plate XL

The Force2Motion Adapter Plate XL is used to accommodate wide cockpits such as the Fanatec Cockpit V2 or do-it-yourself cockpits. The adapter plate consists of a two-part contoured and pre-drilled plate with two stiffening profiles. It fits the Force2Motion adapter system for NLR Traction Plus - size X (1060mm width).

Scope of delivery:

• 1x H.F2M.ADSSF.PLV.X.01: Adapter plate XL contoured front part.
• 1x H.F2M.ADSSF.PLH.X.01: Adapter plate XL contoured rear part
• 2x H.F2M.ADSSF.PLPRO.X.01: Stiffening profile adapter plate XL
• 1x H.F2M.ADSSF.PLSCR.X.01: Screw set adapter plate XL

Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!

Force2Motion adapter for Qubic BT1 Belt-Tensioner to NLR Motion Platform V3

 

In combination with the BT1V3 adapter developed by us, the Seat Belt Tensioner can be mounted on a Next Level Racing V3 as well as on practically any other seat console. The function of a seat slider for longitudinal adjustment of the seat is fully retained.

Watch the video (sorry German version only)

Scope of delivery:

• 1x Force2Motion adapter for Qubic BT1 Belt-Tensioner
• Screw set

Motion platform, belt tensioner, seat slider etc. NOT included.
Attention: Does not fit the Qubic CH1!

Force2Motion Motion Platform Plus Adapter System - Base Support (bottom)

With the F2M adapter system Motion Platform Plus it is possible to mount one or two Motion Platform Plus on the Traction Plus. Depending on the rider's weight (75-100 kg) and the mounted cockpit, an additional V3 can then be inserted into the cockpit.
 
The system consists of a lower (mandatory) and upper (optional) carrier system. Depending on the cockpit used, the upper carrier may or may not be required. The lower carrier is called the basic set and contains the floor plates 150mm and two cross members with bracing plates for Traction-Plus mounting. These parts are not or only partially needed for the upper beam (extension set), as the Motion-Plus platforms are located at this point. The upper support can also be used on its own to extend the Wheel Stands DD and 2.0 with one or two Motion-Plus platforms and a V3 to a Motion Cockpit.

The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.

The basic carrier (below) is required for the following cockpits and motion platforms:

• NLR GT Elite Cockpit on Traction Plus (with Next Level Racing® GTElite Motion Adaptor Upgrade Kit).
• NLR FGT Elite Cockpit on Traction Plus
• NLR GTTrack Cockpit on Traction Plus
• NLR GTTrack Wheel Stand on Traction Plus (extension bracket required)
• NLR Wheel Stand DD on Traction Plus (extension carrier required)
• NLR Wheel Stand 2.0 on Traction Plus (extension carrier required)
• NLR FGT Cockpit on Traction Plus (extension carrier required)
• NLR FGT Cockpit on Traction Plus (only extension carrier required - you do need the base support (bootom) for this!)
• Custom-built cockpits and third-party cockpits with Motion Plus on Traction Plus (Please enquire and seek advice individually!).

Force2Motion Adapter-System Motion Platform Plus - Additional Floor Plate Set Top

If the NLR-FGT-Cockpit (not FGT-ELITE) is used, an additional floor plate with stiffening profile is required. If only one Motion-Plus-Platform is used with the FGT-Cockpit, an 80x40 height compensation profile is required (see separate article).

The complete description of the product incl. all possible combinations and the restrictions regarding the weight when using a Traction Plus System can be found in the following PDF.

Force2Motion adapter system Motion Platform Plus - extension carrier (top)

The upper frame (F2M adapter system Motion Platform Plus extension carrier) is used to accommodate the Wheel Stands of the NLR GTTrack Cockpit or the NLR Wheel Stand DD or the NLR Wheel Stand 2.0 and, together with a V3, to form the cockpit, which can then be equipped with one or two Motion Platform Plus. If this construct is to be mounted on a Traction Plus, you will also need the F2M base support.

And the upper frame can also (alone - without the lower carrier) "transport" the NLR FGT cockpit (with and without NLR seat) to a Motion Cockpit. Here you can integrate one or two Motion Platform Plus and operate the whole thing "solo" with the original floor supports from NLR. And you can even strap the system onto a Traction Plus system. Pretty crazy, but it works.

The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.

The extension carrier (top) is needed for the following cockpits and motion platforms:

•  NLR GTTrack Wheel Stand on Traction Plus (base adapter required)
•  NLR Wheel Stand DD on Traction Plus (base adapter required)
•  NLR Wheel Stand DD without Traction Plus
•  NLR Wheel Stand 2.0 on Traction Plus (basic adapter required)
•  NLR Wheel Stand 2.0 without Traction Plus
•  NLR FGT Cockpit on Traction Plus (base adapter required)
•  NLR FGT Cockpit without Traction Plus

Force2Motion Motion Platform Plus adapter system - Motion Plus extension base support

With the basic carrier Motion Plus extension, the F2M adapter system Motion Platform Plus can be extended so that a second Motion Platform Plus can be used and mounted on the Traction Plus. Depending on the rider's weight (75-100 kg) and the mounted cockpit, an additional V3 can then be inserted into the cockpit.
 
The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.

Scope of delivery:

• 1x Motion Plus cross member (for mounting a second Motion Plus platform) according to the selected colour or coating.
• 2x corner plates powder coating black fine structure
• Slot nuts, screws, nuts and washers
• Instructions in German (English in preparation)

Dimensions: approx. 105mm x 575mm x 60mm

Net weight: approx. 1,4 kg

Delivery times:
 
Delivery time for stock items (inventory items) is usually 2-5 days from receipt of order and payment. Combinations that are not in stock or are explicitly made due to a special colour request usually require 4-6 weeks delivery time.

Force2Motion Adapter System Motion Platform Plus - Additional Bracing Rocker Top FGT

When mounting only one Motion Platform Plus in combination with the NLR FGT cockpit, an additional stiffening profile is required for height compensation.

The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.

Scope of delivery:

• Crossbar 80x40 for rocker Powder coating black fine structure
• 4x angle pieces for fastening Powder coating black fine structure
• 2x plugs 80x40
• Slot nuts, screws, nuts and washers
• Instructions in German (English in preparation)

Dimensions: approx. 80mm x 560mm x 120mm
Net weight: approx. 3,5 kg

The profile is only available in black powder coated.

 

F2M Floor Plate Aluminium Cockpit

The F2M floor plate is installed in aluminium cockpits (e.g. Track Racer) and prevents the driver from stepping on the centre module of the NLR Traction Plus when the cockpit is mounted on it.

The plate consists of a 5mm thick folded aluminium sheet, powder-coated in black fine structure with corresponding holes for mounting on the aluminium profiles of the cockpit. The set is delivered with 6x screws and groove stones I-profile M8.

F2M Shifter Extension Short for Aluminium Cockpits

When installing a Next Level Racing V3 in an alloy cockpit, it can happen that the seat collides with a shifter mount on the alloy cockpit. For this purpose, a black anodised profile 80x40 shortened to 300 mm is offered, which replaces a standard profile (e.g. the 580mm one on the Trakracer 160).

F2M Adapter System FGT-Elite-Qubic

With the F2M adapter system FGT-Elite-Qubic, it is possible to mount the Qubic actuator system QS210 or QS220 on the Next Level Racing FGT Elite cockpit

The F2M base plate is mounted under the Next Level Racing FGT Elite cockpit and closes off the cockpit at the bottom. The control units for the Qubic QS210/QS220 can be mounted on the underside of the plate using pre-drilled holes.

Using the spacers also included, the actuators can be mounted on the cockpit offset by 40 mm so that they do not collide with the pedal plate of the FGT-Elite.

Please note: When mounting the system on a Qubic CH2, the Qubic CH2 cockpit adapter set is also required (see https://www.force2motion.de/de/cockpit-adapter-set-qubic-ch2.html)

The plate consists of a 5 mm thick folded aluminium sheet, powder-coated in black fine structure, with corresponding holes for attachment to the aluminium profiles of the cockpit. The set is supplied with screws and I-profile M8 slot nuts. The spacers are made of black anodised aluminium profile 80x40mm with corresponding holes for the FGT-Elite cockpit.

Scope of delivery:

• Base plate black powder-coated 5 mm drilled for NLR FGT Elite
• T-nuts
• screws
• 4x spacers 40x80 mm for mounting actuators
• 1x additional footrest
• Any controllers and accessories shown are NOT included!

F2M adapter system Thrustmaster Rudder Magnetic Mount

With the adapter system, the Thrustmaster TPR Pendular Rudder can be magnetically secured in corresponding 6 mm holes on a base plate. This allows the pedal to be easily removed from the base plate without tools when not in use. Fits well with the F2M adapter system FGT-Elite-Qubic.

Scope of delivery:

• 4x mag mounts
• 4x M6x 20 mm cylinder head screws black
• 4x M6 washers
• Any controllers and accessories shown are NOT included!

F2M Led Stripe 5M warm white RGB

Smart LED strip RGBIC with warm white, 6300 LEDs strip 2250lm Compatible with Alexa, Google Assistant and Matter, cuttable light chain with music sync; controllable with app

e.g. for mounting on a Qubic System CH2 or comparable cockpit

Scope of delivery:

•  LED strip 5M with power supply unit and switch

Force2Motion Gaming PC Standard (Tower) - Standard (Mid-Range)

•  Intel® Core™ i7 >= 3.6 GHZ
•  32 GB RAM
•  1 TB SSD
•  USB 3.0
•  NVIDIA GeForce RTX 4070 graphics, HDMI, DisplayPort; or similar
•  Form factor: Tower black
•  Giga LAN, WLAN
•  Windows 11 Home 64 bit
•  Quiet fans
•  2 years warranty (pick-up and return)
•  Installation language German (other languages on request)
•  preinstalled with all included drivers (ready to play)

Attention: This is an article which is only sold in connection with Ready-To-Race-Bundles. No single delivery!

Please note: We install quiet running fans from the company BeQuiet and others. Nevertheless, an increased fan noise can occur during intensive performance use in simulations/games, because CPU and graphic cards have to be cooled sufficiently.

Note: Due to the new graphics card generation from Nvidia, the availability of the new series is severely limited and a reliable delivery time statement is not possible. Please contact us for specific questions / orders.

Force2Motion Gaming PC (Tower or Mini-Tower) - High-End

•  Intel® Core™ i9 >= 3.0 GHZ
•  64 GB RAM
•  2 TB SSD
•  USB 3.0
•  NVIDIA GeForce RTX 4090 graphics, DVI, DisplayPort; or similar product
•  Form factor: Tower black or silver,
•  Giga LAN, WLAN
•  DVD Drive (external)
•  PCI USB Card with 4 additional USB-Ports or ext. HUB
•  Windows 11 Home 64 bit
•  Quiet fans
•  2 years warranty (pick-up and return)
•  Installation language German (other languages on request)
•  preinstalled with all included drivers (ready to play)

Attention: This is an article which is only sold in connection with Ready-To-Race-Bundles. No single delivery!

Please note: We install quiet running fans from the company BeQuiet and others. Nevertheless, an increased fan noise can occur during intensive performance use in simulations/games, because CPU and graphic cards have to be cooled sufficiently.


 

R2R-Addon emergency stop switch for Sim-platforms 2x power cold devices plus emergency stop ProSimu (if included) incl. mounting bracket

With the mushroom head slater you can mount the power supply of the Motion Platform comfortably and easily accessible on the cockpit. The emergency stop switch can be switched on and off during the running simulation and the Motion Platform switches on and off during the running game.

Attention: We offer this article, which is individually assembled, only in connection with cockpits, motion platforms and racing simulators purchased from us. No sale to customers who have not purchased simulators from us.

What's included:

• F2M adapter bracket in black satin powder-coated with screws for mounting on the cockpit.
• 3x emergency stop switch wired with safety plug and 3x power cable (for terminal devices)
• Mount option for ProSimu emergency stop switch (included with ProsSimu system)
• Manual

Assembly: The assembly is done by the customer himself. Since the switch is a current-carrying component (220V), the opening and assembly may only be carried out by trained personnel (electricians or similar). We accept no liability for damage caused by disregarding these instructions!

Force2Motion Mini-PC for mounting e.g. at the Fanatec cockpit

The mini PC mount consists of an aluminum bracket with pre-drilled and countersunk mounting holes, so you can do this e.g. screwed to the Fanatec monitor mount (Attention: Currently only support of single-monitor-mount). It can be used to attach mini-PCs (gaming cubes) to the back of the monitor using the supplied Velcro strips. Saves space and the PC disappears from view.

The surface is matt black powder coated. Countersunk screws and nuts are included.

Attention: Depending on the distance between the monitor bracket and the monitor uprights, holes must be drilled with a 8.5 mm or 9 mm metal drill (edges beveled). Be sure to carefully locate the bracket position before drilling.

Dimensions retaining plate: 120mm x 40mm x 246mm (height x depth x width)

Illustrated PC not included.

Force2Motion Fanatec Pedal Lifter
With the Force2Motion Fanatec Pedal-Lifter the pedal plate of the original Fanatec Cockpit V2 can be raised by 6 cm to compensate the slightly raised seating position when using the Next Level Racing Motion Platform (Force2Motion Edition) and to achieve a more reclined driver position. The longitudinal adjustability of the pedals remains fully intact.

Scope of delivery:
2 pieces 280 mm long aluminium profiles black powder-coated with 4 correspondingly long toggle screws M6 for exchange against original toggle screws.

Cockpit, Next Level Racing Motion Platform Force2Motion Edition etc. not included!