





















Next Level Racing Traction Plus (Cockpit-Mover)
Next Level Racing Traction Plus (Cockpit-Mover)
- Product No.:
- H.NLR.T001
- Dispatch within:
-
No longer available / discontinued (Explanation of stock and delivery times)
- Stock:
- 0 Piece
- Weight:
- 150 kg per Piece
This product is not in stock. The quantity entered will be supplied by us very soon.
Next Level Racing Traction Plus (Cockpit-Mover)
The product is no longer available. The Qubic CH2 is an alternative.
Breathtaking realism and performance, incredible¬ immersion and precision, superb technology, engineering and manufacturing…introducing the Next Level Racing® Traction Plus Motion Platform.
The Traction Plus is truly a world class product designed to finally close that gap between the track/tarmac and simulation with a product and experience like no other motion simulator before it. The sliding concept and technology has only ever been seen before in the highest level professional race teams often with budgets in the hundreds of thousands of dollars or in many cases over million dollar budgets.
The Traction Plus was designed and developed in collaboration with a world class motion engineering team to deliver an unrivalled motion experience. To achieve the ultimate realism and precision this has required completely unique technology and engineering with a product designed from ground up over 4 years that includes over 2000 components. The platform has been designed and developed purely for simulation rather than just using commercial actuators and adapting to simulation. The Traction Plus is incredibly more than just a rear traction loss system and designed to combine with the V3 motion platform to provide a ground breaking motion simulator experience.
Racing
The Traction Plus moves the whole cockpit and delivers both understeer and oversteer in the most realistic and precise way possible.
Based on feedback from professional drivers during product development the understeer component of a motion platform which is usually only found in 6DOF systems is absolutely critical in accurately and precisely simulating the vehicle. Feeling both understeer and oversteer the platform can be used effectively for driver/racer training particularly for cornering and rally, feeling what is happening with both rear and front of the vehicle. Even the differences between rear wheel drive, front wheel drive and all-wheel drive vehicles can be felt with the precise feedback delivered through the Traction Plus platform. The Motion Platform V3 and Traction Plus combine to provide accurate vehicle feedback for front wheel lock up meaning you will feel vibration as well as front of the vehicle sliding out of the corner when too much brake pressure is applied. (also applicable for rear wheel lock up depending on vehicle bias)
The Traction Plus combined with the Next Level Racing® Motion Platform V3 provides incredible levels of vehicle feedback to the driver to feel exactly what the vehicle is doing by precisely delivering
As with the Motion Platform V3 that’s had professional aviators including: airline, private, military, and flight training institutions and universities, the Traction Plus can add further realism by allowing the pilot to experience the flight characteristics of the aircraft more realistically.
The Pitch and Roll axis simulation from the Motion Platform V3 is augmented with the Traction Plus to provide the third axis of Yaw to generate an incredibly genuine sensation of flight.
The simulator also replicates the motions of landing gear operation, combat/cannon fire, ground movement, turbulence, and crosswind effects and can be paired with augmented reality/VR to create an unparalleled level or realism. Smoother rudder operation can be trained effectively with the combination of yaw and pivot.
Whether it be for fun, training, or for professional development, the Traction Plus will surely be an important instrument for any aviators journey.
Innovation & Technology
The design, engineering and technology of the Traction Plus is completely ground breaking and you will expect the same level of quality and durability with this product as found with the Motion Platform V3. Designed and manufactured completely in Europe and powered by MotionSystems, the Traction Plus platform is a world class product. Also keeping the home user in mind, painstaking engineering has been performed to not only set a benchmark in performance but also make sure the Traction Plus (like the Motion Platform V3) is the quietest motion platform in its class with the smallest footprint possible.
Developed and Engineered purely for simulation
Both the Traction Plus and Motion Platform V3 have been designed, engineered and manufactured to give the most realistic, immersive and accurate simulation experience and together deliver a new benchmark in motion simulation experience. These are not just another actuator solution that have simply adapted actuators to be used for simulation. These are both products designed, engineered and manufactured from ground up purely for advanced simulation and professional applications being able to precisely deliver feedback to the driver or pilot.
Assembly
As with the Motion Platform V3 The Traction Plus is a product designed for a customer to be able to assemble and setup in their very own home themselves without needing to have a technical background. The Traction Plus platform comes with clear assembly instructions making setup simple for even a beginner.
Software
The Traction Plus comes complete with click and play Next Level Racing® Platform manager software specifically made for the V3 and Traction Plus platforms using telemetry data to give the most realistic and accurate profile cues. This is professional grade software developed by world leading motion engineers ensuring absolute precision in delivering feedback from the game, without lag, in real time. Whilst being professional software it’s designed to be used by a even a novice with simple to use dashboard to start your game and being able to change all settings at a click of a button. For those users that do like getting more hands on with each setting the profiles for the platform are highly customisable.
Having strong relationships with software developers that are behind racing and flight titles this allows constant updates and compatible titles being added to the Next Level Racing® Platform manager as new games are released.
Events, VR & Commercial Use
The Next Level Racing® Traction Plus platform combined with VR is simply an incredible experience for both racing, flight or even amusement software for Rollercoasters or speedboats! Some of our favourite titles include Assetto Corsa®, Dirt Rally®, iRacing®, Project Cars® and Xplane®. For VR companies developing their own software, SDK is available at an extra cost. The SDK allows 3rd party software integration and adding motion for customised VR projects. You are able to order the SDK in our shop. Please note: Each SDK is assigned to a Motion Platform. No transfer possible. More Info: www.nextlevelracing.com/sdk
Reliability & Customer Support
The Next Level Racing® Motion Platform V3 and Traction Plus Platform have been engineered using world class motion engineers and manufactured with premium technology and components to give you not only a world class product but one that is reliable and built to perform.
The Next Level Racing® motion support team will offer dedicated support for the platform and a future Next Level Racing® Community Forum will allow users to share settings, profiles and tips with other users around the world as well as be kept up to date with the latest software updates.
Customers can expect the same level of service, reliability and constant software updates experienced with the V3 Motion Platform
Warranty
With world class engineering and quality, the Traction Plus is backed by a 2 year consumer warranty and 1 year commercial warranty for commercial applications
Specifications
Compatible Operating System
The Platform Manager works only (!) with a Microsoft® Windows Operating System. So you will definitly need a Windows PC. No support for consoles like Xbox® or Playstation®!
Please note:
PC, V3, Cockpit, Games, Monitor, Monitorstands, Carpet, Controls etc. shown on the pictures are not included.
The product is no longer available. The Qubic CH2 is an alternative.
Breathtaking realism and performance, incredible¬ immersion and precision, superb technology, engineering and manufacturing…introducing the Next Level Racing® Traction Plus Motion Platform.
The Traction Plus is truly a world class product designed to finally close that gap between the track/tarmac and simulation with a product and experience like no other motion simulator before it. The sliding concept and technology has only ever been seen before in the highest level professional race teams often with budgets in the hundreds of thousands of dollars or in many cases over million dollar budgets.
The Traction Plus was designed and developed in collaboration with a world class motion engineering team to deliver an unrivalled motion experience. To achieve the ultimate realism and precision this has required completely unique technology and engineering with a product designed from ground up over 4 years that includes over 2000 components. The platform has been designed and developed purely for simulation rather than just using commercial actuators and adapting to simulation. The Traction Plus is incredibly more than just a rear traction loss system and designed to combine with the V3 motion platform to provide a ground breaking motion simulator experience.
Racing
The Traction Plus moves the whole cockpit and delivers both understeer and oversteer in the most realistic and precise way possible.
Based on feedback from professional drivers during product development the understeer component of a motion platform which is usually only found in 6DOF systems is absolutely critical in accurately and precisely simulating the vehicle. Feeling both understeer and oversteer the platform can be used effectively for driver/racer training particularly for cornering and rally, feeling what is happening with both rear and front of the vehicle. Even the differences between rear wheel drive, front wheel drive and all-wheel drive vehicles can be felt with the precise feedback delivered through the Traction Plus platform. The Motion Platform V3 and Traction Plus combine to provide accurate vehicle feedback for front wheel lock up meaning you will feel vibration as well as front of the vehicle sliding out of the corner when too much brake pressure is applied. (also applicable for rear wheel lock up depending on vehicle bias)
The Traction Plus combined with the Next Level Racing® Motion Platform V3 provides incredible levels of vehicle feedback to the driver to feel exactly what the vehicle is doing by precisely delivering
- Sway
- Surge
- Roll
- Pitch
- Understeer and front traction loss – (critical feature usually only experienced in 6DOF motion platforms)
- Oversteer and rear traction loss
- Power slides and drifting
- Partial Heave
- Vehicle and Road effects such as road surface, bumps, wheel lock/spin, gear changes and more
- Shunting effects (to feel side impact contact from opponents/wall)
As with the Motion Platform V3 that’s had professional aviators including: airline, private, military, and flight training institutions and universities, the Traction Plus can add further realism by allowing the pilot to experience the flight characteristics of the aircraft more realistically.
The Pitch and Roll axis simulation from the Motion Platform V3 is augmented with the Traction Plus to provide the third axis of Yaw to generate an incredibly genuine sensation of flight.
The simulator also replicates the motions of landing gear operation, combat/cannon fire, ground movement, turbulence, and crosswind effects and can be paired with augmented reality/VR to create an unparalleled level or realism. Smoother rudder operation can be trained effectively with the combination of yaw and pivot.
Whether it be for fun, training, or for professional development, the Traction Plus will surely be an important instrument for any aviators journey.
Innovation & Technology
The design, engineering and technology of the Traction Plus is completely ground breaking and you will expect the same level of quality and durability with this product as found with the Motion Platform V3. Designed and manufactured completely in Europe and powered by MotionSystems, the Traction Plus platform is a world class product. Also keeping the home user in mind, painstaking engineering has been performed to not only set a benchmark in performance but also make sure the Traction Plus (like the Motion Platform V3) is the quietest motion platform in its class with the smallest footprint possible.
Developed and Engineered purely for simulation
Both the Traction Plus and Motion Platform V3 have been designed, engineered and manufactured to give the most realistic, immersive and accurate simulation experience and together deliver a new benchmark in motion simulation experience. These are not just another actuator solution that have simply adapted actuators to be used for simulation. These are both products designed, engineered and manufactured from ground up purely for advanced simulation and professional applications being able to precisely deliver feedback to the driver or pilot.
Assembly
As with the Motion Platform V3 The Traction Plus is a product designed for a customer to be able to assemble and setup in their very own home themselves without needing to have a technical background. The Traction Plus platform comes with clear assembly instructions making setup simple for even a beginner.
Software
The Traction Plus comes complete with click and play Next Level Racing® Platform manager software specifically made for the V3 and Traction Plus platforms using telemetry data to give the most realistic and accurate profile cues. This is professional grade software developed by world leading motion engineers ensuring absolute precision in delivering feedback from the game, without lag, in real time. Whilst being professional software it’s designed to be used by a even a novice with simple to use dashboard to start your game and being able to change all settings at a click of a button. For those users that do like getting more hands on with each setting the profiles for the platform are highly customisable.
Having strong relationships with software developers that are behind racing and flight titles this allows constant updates and compatible titles being added to the Next Level Racing® Platform manager as new games are released.
Events, VR & Commercial Use
The Next Level Racing® Traction Plus platform combined with VR is simply an incredible experience for both racing, flight or even amusement software for Rollercoasters or speedboats! Some of our favourite titles include Assetto Corsa®, Dirt Rally®, iRacing®, Project Cars® and Xplane®. For VR companies developing their own software, SDK is available at an extra cost. The SDK allows 3rd party software integration and adding motion for customised VR projects. You are able to order the SDK in our shop. Please note: Each SDK is assigned to a Motion Platform. No transfer possible. More Info: www.nextlevelracing.com/sdk
Reliability & Customer Support
The Next Level Racing® Motion Platform V3 and Traction Plus Platform have been engineered using world class motion engineers and manufactured with premium technology and components to give you not only a world class product but one that is reliable and built to perform.
The Next Level Racing® motion support team will offer dedicated support for the platform and a future Next Level Racing® Community Forum will allow users to share settings, profiles and tips with other users around the world as well as be kept up to date with the latest software updates.
Customers can expect the same level of service, reliability and constant software updates experienced with the V3 Motion Platform
Warranty
With world class engineering and quality, the Traction Plus is backed by a 2 year consumer warranty and 1 year commercial warranty for commercial applications
Specifications
- Power Source : 4A/115VAC, 2A/230VAC
- Rated Power : 321W
- Protection Class : I
- Max Payload : 235Kg or 518lbs
- Ambient Temperatures: -20° to +60°C
- Full Performance Temperatures : +5°C to +35°C
- Direct bolt on to all Next Level Racing® GTtrack & Flight Simulator Pro cockpits
- Product Weight – 108kg or 238lbs
- Product Dimensions – 112 x 165 x 13 cm or 44 x 65 x 5 inches
- Boxed Dimensions:
- Box 1 & 3: 115 x 54.5 x 14 cm or 45 x 21.45 x 5.5 inches
- Box 2: 68x 50 x 22.5 cm or 26 x 19 x 8.8 inches
- Boxed Weight:
- Box 1: 46kg or 101lbs
- Box 2: 26kg or 57lbs
- Box 3: 46kg or 101lbs
- Part Numbers - NLR-T001A, NLR-T001B, NLR-T001C
- EAN Codes: 667380785875, 667380785974 and 737787153291
- Led lights with customisable effects and colours
- European manufacturing
- Next Level Racing® Traction Plus Motion Platform
- Next Level Racing® Platform Manager software download
- USB and power cables including ferrite core
- Nuts and Bolts required for assembly
- Product Manual
- Adaptor plates to bolt your Next Level Racing® GTtrack or Next Level Racing® Flight Simulator Pro cockpit (coming 2019) directly to the Traction Plus platform
- Digital assembly instructions and assembly videos available here: www.nextlevelracing.com
- Next Level Racing GTtrack
- Next Level Racing Flight Simulator Pro
- Next Level Racing Motion Platform V3 (Traction Plus is designed to combine with the V3 motion platform to provide a ground breaking motion simulator experience)
- Other brand or DIY cockpits - As we experienced with the Motion Platform V3, many customers also have the ability to create custom adaption to their cockpit and with the Traction Plus we expect to see the same with mounting holes on top of the platform that users can adapt to use with their own cockpit.
- As with the Motion Platform V3 we do plan to release adaptors for other brand of cockpits
- Assetto Corsa
- Assetto Corsa Competizione
- DCS World (all editions)
- DiRT 4*
- DiRT Rally*
- DiRT Rally 2.0*
- F1 2018
- F1 2019
- Forza Horizon 4
- Forza Motorsport 7
- Flight Sim World
- Flight Simulator X
- IL-2 Great Battles Series
- iRacing
- Prepar 3D
- Project CARS
- Project CARS 2
- Project CARS Pagani Edition
- RaceRoom Racing Experience*
- rFactor2
- X-Plane 10
- X-Plane 11
Compatible Operating System
The Platform Manager works only (!) with a Microsoft® Windows Operating System. So you will definitly need a Windows PC. No support for consoles like Xbox® or Playstation®!
Please note:
PC, V3, Cockpit, Games, Monitor, Monitorstands, Carpet, Controls etc. shown on the pictures are not included.
Some questions about Motion Platforms by the manufacturer Motion Systems or Next Level Racing can easily be answered by taking a look at the documentation or the extensive know-how database:
And if you have not yet found the right solution to your problem, please feel free to contact us: service@force2motion.de or phone +49 (0)2405/479490.
- Next Level Racing Traction Plus User Manual (4.76 MB) :
- Next Level Racing Traction Plus User Manual
Next Level Racing
Next Level Racing Simulations Pty Ltd
23 Olympic Circuit
Southport QLD 4215, Australia
P: 07 5630 1801
Web: www.Nextlevelracing.com
E-Mail: support@nextlevelracing.com
Next Level Racing Simulations Pty Ltd
23 Olympic Circuit
Southport QLD 4215, Australia
P: 07 5630 1801
Web: www.Nextlevelracing.com
E-Mail: support@nextlevelracing.com
Customer reviews
Unfortunately there are no reviews yet. Be the first who rates this product.
You must be logged in to submit a review. Login
This product is compatible with (for example):

TOP
Qubic System - QS-CH1 Base Frame Set
About:
The QS-CH2 is a 2DoF motion platform that gives the SURGE and YAW motion for even better of feeling vehicle’s traction loss, breaking and accelerating. The motion system based on world’s fastest linear actuator’s technology provides incredible levels of vehicle feedback to the driver. This motion platform is suitable for Rally, Drift, GT and F1 simulations. The platform is fully
compatible with Qubic System 3DOF actuator’s set and QS-CH1 motion cockpit.
The system in our Showroom for testing: VIDEO
Link to Video: https://www.youtube.com/watch?v=GuoGMqHqqug
Key Features:
What is included in the package:
About:
The QS-CH2 is a 2DoF motion platform that gives the SURGE and YAW motion for even better of feeling vehicle’s traction loss, breaking and accelerating. The motion system based on world’s fastest linear actuator’s technology provides incredible levels of vehicle feedback to the driver. This motion platform is suitable for Rally, Drift, GT and F1 simulations. The platform is fully
compatible with Qubic System 3DOF actuator’s set and QS-CH1 motion cockpit.
The system in our Showroom for testing: VIDEO
Link to Video: https://www.youtube.com/watch?v=GuoGMqHqqug
Key Features:
- Based on world’s fastest Qubic System linear actuators
- Compact and lightweight design
- Suitable for Rally, Drift, GT and other racing simulations
- Supported by dedicated software QubicManager: motion adjustment, motion post-processing, extensive diagnostic or easy and fast use of predefined profiles
- Traction loss
- Also, available as expansion of QS-CH1 motion cockpit
- Proudly made in EU: Engineered, Designed and Manufactured in Poland
- QS-CH2 Motion Platform
- QubicManager software download
- USB and power cables
- Nuts and Bolts required for assembly
- Product Manual
- Price does not contain peripherals like: The Cockpit (The pictured QS-CH1 with the Qubic actuators is NOT included),PC computer, manipulators, game or simulation software, add-ons, accessories.
- Requires separate purchase of QS-MC6 (motion platform controler) if not already owned
- Production- / Shipping-Time aprox 10-14 weeks after your order.
Dispatch within:
2-5 working days (In stock Shop)
11.660,00 EUR
Dispatch within:
2-5 working days (In stock Shop)
These products might also interest you (please check compatibility in the product details or ask us explicitly)...

Next Level Racing® Free Standing Keyboard and Mouse Stand – Compatible with all racing cockpits and wheel stands
- The Next Level Racing® Free Standing Keyboard and Mouse Stand is free standing so it can be positioned to your preference and also making it compatible with any wheel stand or cockpit.
- Allows easy access to keyboard and mouse when required
- Includes Next Level Racing® Keyboard and Mouse Mats Height Adjustable feet, Instructions for assembly
Dispatch within:
2-5 working days (In stock Shop)
129,00 EUR
Dispatch within:
2-5 working days (In stock Shop)

Next Level Racing® Floor Mat
Perfect finish to your stand or cockpit whilst protecting your floor at the same time
Attention: Not suitable for soft wooden floors or laminate (risk of scratching).
Dispatch within:
2-5 working days (In stock Shop)
44,00 EUR
Dispatch within:
2-5 working days (In stock Shop)


F2M Adapter System Traction Plus for Aluminium Cockpits
With the F2M adapter system Traction Plus for aluminium cockpits it is possible to mount self-made cockpits or cockpits made of aluminium profiles on the Next Level Racing Traction Plus. IMPORTANT: The cockpits must have sufficient rigidity and stability so that they CANNOT bend in the middle when resting on the mounts of the Traction Plus system. The product consists of two adapters for the Traction Plus unit (front and rear identical) and a screw set. A cockpit or the Traction Plus System is not included.
With the F2M adapter system Traction Plus for aluminium cockpits it is possible to mount self-made cockpits or cockpits made of aluminium profiles on the Next Level Racing Traction Plus. IMPORTANT: The cockpits must have sufficient rigidity and stability so that they CANNOT bend in the middle when resting on the mounts of the Traction Plus system. The product consists of two adapters for the Traction Plus unit (front and rear identical) and a screw set. A cockpit or the Traction Plus System is not included.
Dispatch within:
2-5 working days (In stock Shop)
199,00 EUR
Dispatch within:
2-5 working days (In stock Shop)

Next Level Racing ELITE Traction Adapter Frame for Motion Platform Plus
With the Next Level Racing ELITE Traction Adapter Frame for Motion Platform Plus it is possible to combine one Motion Platform Plus with the Next Level Racing® Traction Plus System.
Fast Facts
About
Introducing the Next Level Racing Traction Adaptor Frame - the ultimate solution to make your Next Level Racing Motion Plus Platform compatible with the Traction Plus Platform. This specially designed adaptor frame allows for a seamless and versatile setup, with the ability to attach the Motion Plus Platform either to the front or the rear of the frame. Constructed with premium black anodized aluminum and Carbon Steel components, this adaptor frame provides superior strength and rigidity for a safe and precise simulation experience.
With the Next Level Racing ELITE Traction Adapter Frame for Motion Platform Plus it is possible to combine one Motion Platform Plus with the Next Level Racing® Traction Plus System.
Fast Facts
- Designed to make the Next Level Racing® Motion Plus Platform compatible with the Next Level Racing ® Traction Plus Platform.
- Constructed with premium black anodized aluminum and carbon steel components for strength and rigidity.
- Can attach the Next Level Racing® Motion Plus Platform either to the front or the rear of the frame.
About
Introducing the Next Level Racing Traction Adaptor Frame - the ultimate solution to make your Next Level Racing Motion Plus Platform compatible with the Traction Plus Platform. This specially designed adaptor frame allows for a seamless and versatile setup, with the ability to attach the Motion Plus Platform either to the front or the rear of the frame. Constructed with premium black anodized aluminum and Carbon Steel components, this adaptor frame provides superior strength and rigidity for a safe and precise simulation experience.
Dispatch within:
2-5 working days (In stock Shop)
from 129,00 EUR
Dispatch within:
2-5 working days (In stock Shop)

NEXT LEVEL RACING GTElite Lite Racing Simulator Cockpit - Side and Front Plate Edition
Leading features:
Build your own Elite Journey with the best value aluminium profile cockpit. The GTElite Lite cockpit’s patent-pending design brings rigidity and stability to a new price point making it the best mid-range aluminium profile cockpit on the market. With attention to detail and engineering as seen on our Elite series, the GTElite Lite compared to mid-range cockpits in its class is more rigid, easier to assemble, and provides more inclusions, while providing a higher quality finish.
While constructed to suit the mid-range category with a “4080” profile, through cutting edge engineering and manufacturing, combined with unique components, fixtures, and reinforcements, the GTElite Lite is the most rigid mid-range cockpit. Through this innovative process, the GTElite Lite in some cases is stronger than conventional “16040” cockpits seen on the market.
With an extensive ecosystem in mind, the GTElite Lite is upgradable to be compatible with Next Level Racing® Motion Products and can be transformed into a multi-position cockpit solution with the ready set kits*.
*Motion Kit and Formula kit need to be purchased separately.
Leading features:
- Dedicated gt cockpit with the most authentic and adaptable driving position
- Premium anodized black aluminium finish
- Pre-machined precision holes in aluminium profile for rigidity and ease of assembly
- All the extra’s included such as nlr flex free seat slider system, height adjustable shock absorption feet, buttkicker® gamer 2 adaptor, cable management clips, and tool kit holder
- Taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
- Rigid and highly adjustable mounting supports included for your seat, wheel, pedals
- Pedal position height, angle and distance adjustable
- Premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
- Fully enclosed base frame for strength and aesthetics as well as one piece aluminium profiles for rigidity required for motion
- Compatible with all major brands of electronics for wheels and pedals including fanatec, simxperience and many more
- Upgradable to be compatible with next level racing® motion products and other accessories
- Front & side mount with 70 degrees of adjustability for direct drive wheelbases
Build your own Elite Journey with the best value aluminium profile cockpit. The GTElite Lite cockpit’s patent-pending design brings rigidity and stability to a new price point making it the best mid-range aluminium profile cockpit on the market. With attention to detail and engineering as seen on our Elite series, the GTElite Lite compared to mid-range cockpits in its class is more rigid, easier to assemble, and provides more inclusions, while providing a higher quality finish.
While constructed to suit the mid-range category with a “4080” profile, through cutting edge engineering and manufacturing, combined with unique components, fixtures, and reinforcements, the GTElite Lite is the most rigid mid-range cockpit. Through this innovative process, the GTElite Lite in some cases is stronger than conventional “16040” cockpits seen on the market.
With an extensive ecosystem in mind, the GTElite Lite is upgradable to be compatible with Next Level Racing® Motion Products and can be transformed into a multi-position cockpit solution with the ready set kits*.
*Motion Kit and Formula kit need to be purchased separately.
Dispatch within:
2-5 working days (In stock Shop)
699,00 EUR
Dispatch within:
2-5 working days (In stock Shop)

Next Level Racing Elite Motion Adaptor Upgrade Kit
Leading Features
The Next Level Racing® Elite Motion Adaptor Upgrade Kit is a sim racer’s step towards full immersion, making the Elite* cockpit compatible with the Next Level Racing® Motion V3 and Traction Plus Platform. A combination of precision CNC-machining and laser cutting manufacturing process, as well as anodised and powder coat finish, gives the Elite Motion Adaptor Upgrade Kit the same level of quality and rigidity as expected from our Elite range of simulation products. *Please check Motion Products to see if your cockpit requires the Elite Motion Adaptor Upgrade Kit as not all Elite cockpits require this add-on
Leading Features
- Compatible with the Next Level Racing® Elite Series Cockpits, Motion Platform V3, and Traction Plus Platform
- Transforms the Elite cockpit into a motion compatible simulator*
- Constructed with premium Carbon Steel and Aluminium Extrusion
- Finished with high quality powder coating and anodised aluminium parts
- Pre-drilled and machined for streamline installation
The Next Level Racing® Elite Motion Adaptor Upgrade Kit is a sim racer’s step towards full immersion, making the Elite* cockpit compatible with the Next Level Racing® Motion V3 and Traction Plus Platform. A combination of precision CNC-machining and laser cutting manufacturing process, as well as anodised and powder coat finish, gives the Elite Motion Adaptor Upgrade Kit the same level of quality and rigidity as expected from our Elite range of simulation products. *Please check Motion Products to see if your cockpit requires the Elite Motion Adaptor Upgrade Kit as not all Elite cockpits require this add-on
Dispatch within:
2-5 working days (In stock Shop)
99,00 EUR
Dispatch within:
2-5 working days (In stock Shop)

Next Level Racing Race-Seat ES1
Fast Facts:
The Next Level Racing® Elite ES1 seat is designed and developed for the most demanding sim racer using both virtual and real motorsport industry feedback. Manufactured using a five-axis roto-molded process to provide optimal support and rigidity at every mounting position. Drivers will enjoy the high-quality PU molded foam suede cushions over countless hours of racing. The Elite ES1 is a versatile solution for every type of sim racer.
Fast Facts:
- Ergonomically designed and engineered specifically for sim racing
- Compatible with all side mounting seat brackets
- Five-axis Rotationally molded polymer seat for ultimate tensile strength
- PU molded Foam with premium suede finish
- Next Level Racing seat belts included for increased immersion and motion users
- Comfortably fit users up to 42” waist and built rigid to support up to 250 kg users
The Next Level Racing® Elite ES1 seat is designed and developed for the most demanding sim racer using both virtual and real motorsport industry feedback. Manufactured using a five-axis roto-molded process to provide optimal support and rigidity at every mounting position. Drivers will enjoy the high-quality PU molded foam suede cushions over countless hours of racing. The Elite ES1 is a versatile solution for every type of sim racer.
Dispatch within:
1 to 2 Weeks (In stock central warehouse)
449,00 EUR
Dispatch within:
1 to 2 Weeks (In stock central warehouse)


Force2Motion Motion Platform Plus adapter system - Motion Plus extension base support
With the basic carrier Motion Plus extension, the F2M adapter system Motion Platform Plus can be extended so that a second Motion Platform Plus can be used and mounted on the Traction Plus. Depending on the rider's weight (75-100 kg) and the mounted cockpit, an additional V3 can then be inserted into the cockpit.
The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.
Scope of delivery:
Dimensions: approx. 105mm x 575mm x 60mm
Net weight: approx. 1,4 kg
Delivery times:
Delivery time for stock items (inventory items) is usually 2-5 days from receipt of order and payment. Combinations that are not in stock or are explicitly made due to a special colour request usually require 4-6 weeks delivery time.
With the basic carrier Motion Plus extension, the F2M adapter system Motion Platform Plus can be extended so that a second Motion Platform Plus can be used and mounted on the Traction Plus. Depending on the rider's weight (75-100 kg) and the mounted cockpit, an additional V3 can then be inserted into the cockpit.
The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.
Scope of delivery:
- 1x Motion Plus cross member (for mounting a second Motion Plus platform) according to the selected colour or coating.
- 2x corner plates powder coating black fine structure
- Slot nuts, screws, nuts and washers
- Instructions in German (English in preparation)
Dimensions: approx. 105mm x 575mm x 60mm
Net weight: approx. 1,4 kg
Delivery times:
Delivery time for stock items (inventory items) is usually 2-5 days from receipt of order and payment. Combinations that are not in stock or are explicitly made due to a special colour request usually require 4-6 weeks delivery time.
Dispatch within:
Only on order (No cancellation) - 2 to 4 weeks
from 89,00 EUR
Dispatch within:
Only on order (No cancellation) - 2 to 4 weeks


F2M Adapter Set V3 Motion Platform for Aluminium Cockpits
With the F2M-Adapter Motion Platform V3 for aluminium cockpits it is possible to mount the Next Level Racing Motion Platform V3 in an aluminium cockpit e.g. of Trak Racer type 80 and 160. With the 160 cockpit (160mm overall height), the longitudinal profiles of the seat mount are omitted. With the 80 cockpit these are used (to obtain the necessary height / airspace for the V3). With the 160 cockpit the seat position increases by approx. 2 cm compared to the original seat, with the 80 cockpit by approx. 10 cm. For an inside width in the aluminium cockpit of 500mm.
The set consists of two aluminium brackets in black fine structure powder-coated for the V3 with 4 clamping screws. The inside of the bracket is equipped with a sliding strip so that the surface of the aluminium profiles is protected when the V3 is moved longitudinally.
Attention: When installing, make sure that there is sufficient air space for the fans of the V3 (approx. 2 cm distance to the floor and rear wall) and that the seat and, if applicable, a mounted butt-kicker can move freely without bumping into fixed parts or producing a crushing hazard for the hands. If a static shifter mount is used in the seat's movement area, it must be shortened so that the seat can move freely in all directions (this can be supplied by Force2Motion on request - see corresponding article).
Please Note: Cockpit and V3 not included.
With the F2M-Adapter Motion Platform V3 for aluminium cockpits it is possible to mount the Next Level Racing Motion Platform V3 in an aluminium cockpit e.g. of Trak Racer type 80 and 160. With the 160 cockpit (160mm overall height), the longitudinal profiles of the seat mount are omitted. With the 80 cockpit these are used (to obtain the necessary height / airspace for the V3). With the 160 cockpit the seat position increases by approx. 2 cm compared to the original seat, with the 80 cockpit by approx. 10 cm. For an inside width in the aluminium cockpit of 500mm.
The set consists of two aluminium brackets in black fine structure powder-coated for the V3 with 4 clamping screws. The inside of the bracket is equipped with a sliding strip so that the surface of the aluminium profiles is protected when the V3 is moved longitudinally.
Attention: When installing, make sure that there is sufficient air space for the fans of the V3 (approx. 2 cm distance to the floor and rear wall) and that the seat and, if applicable, a mounted butt-kicker can move freely without bumping into fixed parts or producing a crushing hazard for the hands. If a static shifter mount is used in the seat's movement area, it must be shortened so that the seat can move freely in all directions (this can be supplied by Force2Motion on request - see corresponding article).
Please Note: Cockpit and V3 not included.
Dispatch within:
2-5 working days (In stock Shop)
99,00 EUR
Dispatch within:
2-5 working days (In stock Shop)


Force2Motion Adapter-System Motion Platform Plus - Additional Floor Plate Set Top
If the NLR-FGT-Cockpit (not FGT-ELITE) is used, an additional floor plate with stiffening profile is required. If only one Motion-Plus-Platform is used with the FGT-Cockpit, an 80x40 height compensation profile is required (see separate article).
The complete description of the product incl. all possible combinations and the restrictions regarding the weight when using a Traction Plus System can be found in the following PDF.
If the NLR-FGT-Cockpit (not FGT-ELITE) is used, an additional floor plate with stiffening profile is required. If only one Motion-Plus-Platform is used with the FGT-Cockpit, an 80x40 height compensation profile is required (see separate article).
The complete description of the product incl. all possible combinations and the restrictions regarding the weight when using a Traction Plus System can be found in the following PDF.
Dispatch within:
Only on order (No cancellation) - 2 to 4 weeks
from 199,00 EUR
Dispatch within:
Only on order (No cancellation) - 2 to 4 weeks

-11%
Next Level Racing GTTrack Cockpit
The GTtrack is the ultimate cockpit for serious sim racers looking for rigidity, complete adjustability and a true race car seating position. The GTtrack was designed with the close feedback of professional drivers and some of the world's fastest eSports drivers to give you every feature required for serious sim racing. The complete rigidity of the GTtrack allows it to support direct drive wheels and professional pedal sets as weil as being compatible with all major wheel and pedals including Thrustmaster®, Logitech® and Fanatec®.
Features:
The GTtrack is the ultimate cockpit for serious sim racers looking for rigidity, complete adjustability and a true race car seating position. The GTtrack was designed with the close feedback of professional drivers and some of the world's fastest eSports drivers to give you every feature required for serious sim racing. The complete rigidity of the GTtrack allows it to support direct drive wheels and professional pedal sets as weil as being compatible with all major wheel and pedals including Thrustmaster®, Logitech® and Fanatec®.
Features:
- Steering wheel angle and distance adjustability. Pedal angle and distance adjustbility
- Gear shifter distance adjustable
- Pre-drilled for all major brands including Thrustmaster®, Logitech® and Fanatec®
- Built with rigidity to support direct drive wheels and professional pedal sets
- Built with motion in mind - The Next Level Racing® Motion Platform V3 bolts straight on in less than 10 minutes and fully compatible with the Next Level Racing® Traction+ Motion Platform
- lncluded handbrake support for both Thrustmaster® and Fanatec® handbrakes
- Buttkicker Gamer 2 Adapter
- Height adjustable rubber feet and Next Level Racing® Lockable Wheel Gastors
- Box dimensions 100 x 61 x 59 cm - 60 kg
Dispatch within:
2-5 working days (In stock Shop)
Only 799,00 EUR
Dispatch within:
2-5 working days (In stock Shop)

Next Level Racing® F-GT Elite Formula & GT Aluminium Profile Simulator Cockpit - Wheel Plate Edition
Key Features:
Key Features:
- All in one cockpit with quick adjustments for all driving positions including true formula, GT, hybrid, truck, and tank
- Rigid and highly adjustable mounting support included for your seat, wheel, pedals, shifter, handbrake
- Post anodized custom carbon grey (scratch resistant) aluminium profile with premium carbon steel powder coated components
- Pedal position height, angle and distance adjustable
- Pre-machined holes in aluminium profile for rigidity and ease of assembly
- Compatible and easy installation with Next Level Racing® Motion Platforms
- All the extra’s included such as NLR seat slider system, seat brackets, height adjustable shock absorption feet, gear shifter & handbrake support plate, foot step, Buttkicker® gamer 2 adaptor, cable management clips, Motion Platform V3 adaptors, ratchet tool & more
- Premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
- T-slot extruded aluminium allows compatibility of accessories with other cockpit brands
- Fully enclosed base frame for strength and aesthetics
- Taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
- Compatible with all major brands of electronics for major brands of wheels, pedals and shifters including Fanatec, Thrustmaster, Logitech, Simxperience and many more
Dispatch within:
2-5 working days (In stock Shop)
1.079,00 EUR
Dispatch within:
2-5 working days (In stock Shop)

-17%
Next Level Racing® Flight Simulator Cockpit - BOEING MILITARY EDITION
LEADING FEATURES
LEADING FEATURES
- Dedicated flight cockpit for maximum simulation immersion
- Suited for Combat flight, General Aviation, Commercial flight, and Space Exploration users
- Compatible with flight electronics such as yokes, joysticks, rudders, and throttles for all major brands
- Wide range of adjustments to tailor your flight experience
- Includes keyboard and mouse support for easy navigation with custom Next Level Racing® keyboard and mouse pads
- Compatible with Thrustmaster® / Logitech / Saitek® / Honeycomb/ Virtual Fly/ Crosswind and other flight accessory brands
- Includes Buttkicker® Adaptor, Next Level Racing® Four-point harness, and Lumber Support
- Motion Compatible with added accessories**
Dispatch within:
2-5 working days (In stock Shop)
Only 739,00 EUR
Dispatch within:
2-5 working days (In stock Shop)

Next Level Racing GT Elite Racing Simulator Cockpit - Ford GT Wheel Plate Edition - Blue Line
Fast Facts
About
Introducing an official Ford Licensed product, the Next Level Racing® GTElite Ford GT Edition Cockpit. The GTElite Ford GT Edition cockpit’s patent-pending design brings rigidity and stability into a new price point making it the best mid-range aluminium profile cockpit on the market. Premium blue anodization finish, laser etched Ford Oval logo, Ford GT Logo, and the laser etched iconic Ford GT stripes, the GTElite Ford GT Cockpit completes the Ford brand experience for the user. With attention to detail and engineering as seen on our Elite series, the GTElite Ford Edition compared to mid-range cockpits in its class is more rigid, easier to assemble, provides more inclusions, while providing a higher quality finish.
While constructed to suit the mid-range category with a “4080” profile, through cutting edge engineering and manufacturing, combined with unique components, fixtures, and reinforcements, the GTElite Ford Edition is the most rigid mid-range cockpit. Through this innovative process, the GTElite Ford GT Edition in some cases is stronger than conventional “16040” cockpits seen on the market. With an extensive ecosystem in mind, the GTElite is upgradable to be compatible with Next Level Racing® Motion Products and has the ability to be transformed into a multi-position cockpit solution with the ready set kits*.
*Motion Kit and Formula kit need to be purchased separately.
Fast Facts
- Dedicated GT cockpit with the most authentic and adaptable driving position
- Premium anodized blue aluminium finish with laser etched ford branding
- Official Ford licensed product with Ford GT branding
- Pre-machined precision holes in aluminium profile for rigidity and ease of assembly
- All the extra’s included such as nlr flex free seat slider system, seat brackets, height adjustable shock absorption feet, gear shifter & handbrake support plate, buttkicker® gamer 2 adaptor, cable management clips, and tool kit holder
- Taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
- Rigid and highly adjustable mounting supports included for your seat, wheel, pedals, shifter, handbrake
- Pedal position height, angle and distance adjustable
- Premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
- Fully enclosed base frame for strength and aesthetics as well as one piece aluminium profiles for rigidity required for motion
- Compatible with all major brands of electronics for major brands of wheels, pedals and shifters including fanatec, thrustmaster, logitech, simxperience and many more
- Upgradable to be compatible with Next Level Racing® motion products and other accessories
About
Introducing an official Ford Licensed product, the Next Level Racing® GTElite Ford GT Edition Cockpit. The GTElite Ford GT Edition cockpit’s patent-pending design brings rigidity and stability into a new price point making it the best mid-range aluminium profile cockpit on the market. Premium blue anodization finish, laser etched Ford Oval logo, Ford GT Logo, and the laser etched iconic Ford GT stripes, the GTElite Ford GT Cockpit completes the Ford brand experience for the user. With attention to detail and engineering as seen on our Elite series, the GTElite Ford Edition compared to mid-range cockpits in its class is more rigid, easier to assemble, provides more inclusions, while providing a higher quality finish.
While constructed to suit the mid-range category with a “4080” profile, through cutting edge engineering and manufacturing, combined with unique components, fixtures, and reinforcements, the GTElite Ford Edition is the most rigid mid-range cockpit. Through this innovative process, the GTElite Ford GT Edition in some cases is stronger than conventional “16040” cockpits seen on the market. With an extensive ecosystem in mind, the GTElite is upgradable to be compatible with Next Level Racing® Motion Products and has the ability to be transformed into a multi-position cockpit solution with the ready set kits*.
*Motion Kit and Formula kit need to be purchased separately.
Dispatch within:
1 to 2 Weeks (In stock central warehouse)
799,00 EUR
Dispatch within:
1 to 2 Weeks (In stock central warehouse)


Force2Motion adapter system Motion Platform Plus - extension carrier (top)
The upper frame (F2M adapter system Motion Platform Plus extension carrier) is used to accommodate the Wheel Stands of the NLR GTTrack Cockpit or the NLR Wheel Stand DD or the NLR Wheel Stand 2.0 and, together with a V3, to form the cockpit, which can then be equipped with one or two Motion Platform Plus. If this construct is to be mounted on a Traction Plus, you will also need the F2M base support.
And the upper frame can also (alone - without the lower carrier) "transport" the NLR FGT cockpit (with and without NLR seat) to a Motion Cockpit. Here you can integrate one or two Motion Platform Plus and operate the whole thing "solo" with the original floor supports from NLR. And you can even strap the system onto a Traction Plus system. Pretty crazy, but it works.
The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.
The extension carrier (top) is needed for the following cockpits and motion platforms:
Scope of delivery:
Dimensions: approx. 1370mm x 575mm x 60mm
Net weight: approx. 11 kg
Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. Manual skills and tools (including a ratchet set, Allen key, open-ended spanner set) are required for assembly. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!
Please note:
The upper frame (F2M adapter system Motion Platform Plus extension carrier) is used to accommodate the Wheel Stands of the NLR GTTrack Cockpit or the NLR Wheel Stand DD or the NLR Wheel Stand 2.0 and, together with a V3, to form the cockpit, which can then be equipped with one or two Motion Platform Plus. If this construct is to be mounted on a Traction Plus, you will also need the F2M base support.
And the upper frame can also (alone - without the lower carrier) "transport" the NLR FGT cockpit (with and without NLR seat) to a Motion Cockpit. Here you can integrate one or two Motion Platform Plus and operate the whole thing "solo" with the original floor supports from NLR. And you can even strap the system onto a Traction Plus system. Pretty crazy, but it works.
The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.
The extension carrier (top) is needed for the following cockpits and motion platforms:
- NLR GTTrack Wheel Stand on Traction Plus (base adapter required)
- NLR Wheel Stand DD on Traction Plus (base adapter required)
- NLR Wheel Stand DD without Traction Plus
- NLR Wheel Stand 2.0 on Traction Plus (basic adapter required)
- NLR Wheel Stand 2.0 without Traction Plus
- NLR FGT Cockpit on Traction Plus (base adapter required)
- NLR FGT Cockpit without Traction Plus
Scope of delivery:
- 2x side member with holes in specified colour
- 4x end plugs in black plastic
- 2x cross member top/outside with thread at the head sides
- 2x upper cross member for upper floor panel
- 2x top floor panel as step protection, bracing and mounting for various cockpits
- 1x top cross member for mounting rocker (original pivot bar when mounting only one Motion Plus platform)
- Slot nuts, screws, nuts and washers
- Instructions in German (English in preparation)
Dimensions: approx. 1370mm x 575mm x 60mm
Net weight: approx. 11 kg
Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. Manual skills and tools (including a ratchet set, Allen key, open-ended spanner set) are required for assembly. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!
Please note:
- Motion platforms, Traction Plus, V3 etc and cockpits not included. The article presented here only contains the parts described under "Scope of delivery".
- When mounting the system on an NLR Traction Plus system, please note the maximum payload of 235 kg (incl. driver)!
- There are various options for this article, which are shown in the compatibility matrix.
Dispatch within:
Only on order (No cancellation) - 2 to 4 weeks
449,00 EUR
Dispatch within:
Only on order (No cancellation) - 2 to 4 weeks

GT Seat Add-On for Wheel Stand DD/WS 2.0
Features:
Features:
- Compatible with Wheel Stand DD and future Wheel Stand 2.0
- Compatible with Next Level Racing® Motion products
- Designed with breathable fabric with added leather trim for a slick design
- Custom reclining chair with angle and distance adjustment
- Premium industry manufacturing to ensure durability and strength
- Gear shifter distance adjustable. Gear Shifter and Handbrake Support (Can also support 2 x Thrustmaster® TSS at the same time)
- Buttkicker® Gamer 2 adaptor and height adjustable feet included
- Compatible with Next Level Racing® Accessories range
Dispatch within:
2-5 working days (In stock Shop)
539,00 EUR
Dispatch within:
2-5 working days (In stock Shop)

Next Level Racing GT Elite Racing Simulator Cockpit - Front and Side Mount Edition
Leading Features:
About:
Introducing the new Next Level Racing® GTElite Cockpit. The GTElite cockpit’s patent-pending design brings rigidity and stability into a new price point making it the best mid-range aluminium profile cockpit on the market. With attention to detail and engineering as seen on our Elite series, the GTElite compared to mid-range cockpits in its class is more rigid, easier to assemble, provides more inclusions, while providing a higher quality finish.
While constructed to suit the mid-range category with a “4080” profile, through cutting edge engineering and manufacturing, combined with unique components, fixtures, and reinforcements, the GTElite is the most rigid mid-range cockpit. Through this innovative process, the GTElite in some cases is stronger than conventional “16040” cockpits seen on the market.
With an extensive ecosystem in mind, the GTElite is upgradable to be compatible with Next Level Racing® Motion Products and has the ability to be transformed into a multi-position cockpit solution with the ready set kits*.
*Motion Kit and Formula kit need to be purchased separately.
Leading Features:
- Dedicated GT Cockpit with the most authentic and adaptable driving positio
- premium anodized black aluminium finish
- pre-machined precision holes in aluminium profile for rigidity and ease of assembly
- all the extra’s included such as NLR flex free seat slider system, seat brackets, height adjustable shock absorption feet, gear shifter & handbrake support plate, Buttkicker® Gamer 2 adaptor, cable management clips, and tool kit holder
- taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
- rigid and highly adjustable mounting supports included for your seat, wheel, pedals, shifter, handbrake
- pedal position height, angle and distance adjustable
- premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
- fully enclosed base frame for strength and aesthetics as well as one piece aluminium profiles for rigidity required for motion
- compatible with all major brands of electronics for major brands of wheels, pedals and shifters including Fanatec, Thrustmaster, Logitech, Simxperience and many more
- upgradable to be compatible with Next Level Racing® motion products and other accessories
- Front & Side Mount with 70 degrees of adjustability for Direct Drive Wheelbases
About:
Introducing the new Next Level Racing® GTElite Cockpit. The GTElite cockpit’s patent-pending design brings rigidity and stability into a new price point making it the best mid-range aluminium profile cockpit on the market. With attention to detail and engineering as seen on our Elite series, the GTElite compared to mid-range cockpits in its class is more rigid, easier to assemble, provides more inclusions, while providing a higher quality finish.
While constructed to suit the mid-range category with a “4080” profile, through cutting edge engineering and manufacturing, combined with unique components, fixtures, and reinforcements, the GTElite is the most rigid mid-range cockpit. Through this innovative process, the GTElite in some cases is stronger than conventional “16040” cockpits seen on the market.
With an extensive ecosystem in mind, the GTElite is upgradable to be compatible with Next Level Racing® Motion Products and has the ability to be transformed into a multi-position cockpit solution with the ready set kits*.
*Motion Kit and Formula kit need to be purchased separately.
Dispatch within:
2-5 working days (In stock Shop)
799,00 EUR
Dispatch within:
2-5 working days (In stock Shop)

Next Level Racing Elite Tablet and Button Box Mount Add-On
Leading features:
About:
The Next Level Racing® Elite Tablet/ Button Box Add-on, is the perfect solution for the serious sim racer to complete the full informational and immersive simulation experience to have a tablet or button box within reach with complete adjustability. With a wide range of mounting options for the Elite Tablet/ Button Box Add-on, users are able to customize their simulator for the best simulation experience. By having a permanent station for a button box or a tablet, the user is able to create a more connected and informed experience with simulation.
Leading features:
- Compatible with the Next Level Racing® Elite series Cockpits
- Wide range of tilt and angle adjustment for fine tunning
- Compatible with Mobile Phones, Tablets, and Button Boxes
- Tablet Mount Bracket supporting heights from
- Button Box Bracket supporting heights from 35mm - 155mm
About:
The Next Level Racing® Elite Tablet/ Button Box Add-on, is the perfect solution for the serious sim racer to complete the full informational and immersive simulation experience to have a tablet or button box within reach with complete adjustability. With a wide range of mounting options for the Elite Tablet/ Button Box Add-on, users are able to customize their simulator for the best simulation experience. By having a permanent station for a button box or a tablet, the user is able to create a more connected and informed experience with simulation.
Dispatch within:
2 - 4 weeks (In stock manufacturer)
149,00 EUR
Dispatch within:
2 - 4 weeks (In stock manufacturer)

Next Level Racing® F-GT Elite Formula & GT Aluminium Profile Simulator Cockpit - Side and Front Mount Edition
Fast Facts:
Fast Facts:
- All in one cockpit with quick adjustments for all driving positions including true formula, GT, Hybrid, Truck, and Tank
- Zero-flex Front & Side Mount with 70 degrees of adjustability for Direct Drive wheelbases
- Rigid and highly adjustable mounting support included for your seat, wheel, pedals, shifter, handbrake
- Post anodized custom carbon grey (scratch resistant) aluminium profile with premium carbon steel powder coated components
- Pedal position height, angle and distance adjustable
- Pre-machined holes in aluminium profile for rigidity and ease of assembly
- Compatible and easy installation with Next Level Racing® Motion Platforms
- All the extra’s included such as NLR seat slider system, seat brackets, height adjustable shock absorption feet, gear shifter & handbrake support plate, foot step, Buttkicker® Gamer 2 adaptor, cable management clips, Motion Platform V3 adaptors, ratchet tool & more
- Premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
- T-slot extruded aluminium allows compatibility of accessories with other cockpit brands
- Fully enclosed base frame for strength and aesthetics
- Taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
- Compatible with all major brands of electronics for wheels, pedals and shifters including Fanatec, Simxperience and many more
Dispatch within:
2-5 working days (In stock Shop)
1.099,00 EUR
Dispatch within:
2-5 working days (In stock Shop)

-22%
Next Level Racing Elite Direct Mount Overhead Monitor Add-On - Black Edition
Leading features:
About:
The Next Level Racing® Elite Direct Mount Overhead Monitor Add-on- Black Edition, is the perfect solution for the serious sim racer to create a fully immersive and informational racing experience. The Elite Direct Mount Overhead Monitor Add-on will offer racers the ability to use the overhead screen for a plethora of functions such as live telemetry, streaming software, and more. The Elite Direct Mount Overhead Monitor Add-on is the perfect solution for non-Motion users.
*If you are considering adding the Motion Plat Plus or Traction Plus Platform products, we recommend exploring one of our Elite Free Standing Monitor Solutions as the motion experience during simulation could affect your Monitors/TVs.
Leading features:
- Black anodised aluminum extrusion for a premium finish
- Compatible with Next Level Racing® Elite Direct Monitor Mount- Black Edition
- Supports single monitors up to 32” () *
- Pre-drilled and Laser Alignment lines for easy assembly
- VESA mount support 75mm X 75mm to 100mm X 100mm
- Optimized angle and tilt adjustability for refined screen alignment
About:
The Next Level Racing® Elite Direct Mount Overhead Monitor Add-on- Black Edition, is the perfect solution for the serious sim racer to create a fully immersive and informational racing experience. The Elite Direct Mount Overhead Monitor Add-on will offer racers the ability to use the overhead screen for a plethora of functions such as live telemetry, streaming software, and more. The Elite Direct Mount Overhead Monitor Add-on is the perfect solution for non-Motion users.
*If you are considering adding the Motion Plat Plus or Traction Plus Platform products, we recommend exploring one of our Elite Free Standing Monitor Solutions as the motion experience during simulation could affect your Monitors/TVs.
Dispatch within:
2-5 working days (In stock Shop)
Only 139,00 EUR
Dispatch within:
2-5 working days (In stock Shop)

Next Level Racing GT Elite Racing Simulator Cockpit - Wheel Plate Edition
Leading Features:
Introducing the new Next Level Racing® GTElite Cockpit. The GTElite cockpit’s patent-pending design brings rigidity and stability into a new price point making it the best mid-range aluminium profile cockpit on the market. With attention to detail and engineering as seen on our Elite series, the GTElite compared to mid-range cockpits in its class is more rigid, easier to assemble, provides more inclusions, while providing a higher quality finish.
While constructed to suit the mid-range category with a “4080” profile, through cutting edge engineering and manufacturing, combined with unique components, fixtures, and reinforcements, the GTElite is the most rigid mid-range cockpit. Through this innovative process, the GTElite in some cases is stronger than conventional “16040” cockpits seen on the market.
With an extensive ecosystem in mind, the GTElite is upgradable to be compatible with Next Level Racing® Motion Products and has the ability to be transformed into a multi-position cockpit solution with the ready set kits*.
*Motion Kit and Formula kit need to be purchased separately.
Leading Features:
- Dedicated GT Cockpit with the most authentic and adaptable driving positio
- premium anodized black aluminium finish
- pre-machined precision holes in aluminium profile for rigidity and ease of assembly
- all the extra’s included such as nlr flex free seat slider system, seat brackets, height adjustable shock absorption feet, gear shifter & handbrake support plate, Buttkicker® Gamer 2 adaptor, cable management clips, and tool kit holder
- taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
- rigid and highly adjustable mounting supports included for your seat, wheel, pedals, shifter, handbrake
- pedal position height, angle and distance adjustable
- premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
- fully enclosed base frame for strength and aesthetics as well as one piece aluminium profiles for rigidity required for motion
- compatible with all major brands of electronics for major brands of wheels, pedals and shifters including Fanatec, Thrustmaster, Logitech, Simxperience and many more
- upgradable to be compatible with Next Level Racing® motion products and other accessories
Introducing the new Next Level Racing® GTElite Cockpit. The GTElite cockpit’s patent-pending design brings rigidity and stability into a new price point making it the best mid-range aluminium profile cockpit on the market. With attention to detail and engineering as seen on our Elite series, the GTElite compared to mid-range cockpits in its class is more rigid, easier to assemble, provides more inclusions, while providing a higher quality finish.
While constructed to suit the mid-range category with a “4080” profile, through cutting edge engineering and manufacturing, combined with unique components, fixtures, and reinforcements, the GTElite is the most rigid mid-range cockpit. Through this innovative process, the GTElite in some cases is stronger than conventional “16040” cockpits seen on the market.
With an extensive ecosystem in mind, the GTElite is upgradable to be compatible with Next Level Racing® Motion Products and has the ability to be transformed into a multi-position cockpit solution with the ready set kits*.
*Motion Kit and Formula kit need to be purchased separately.
Dispatch within:
2-5 working days (In stock Shop)
699,00 EUR
Dispatch within:
2-5 working days (In stock Shop)

Next Level Racing Universal Handbrake Plate
Leading Features:
Introducing the Next Level Racing Universal Handbrake Plate –the ultimate solution that now allows you to mount both your shifter and handbrake to the cockpit simultaneously. The Universal Handbrake Plate is designed to provide a seamless, integrated experience for dual-control setups, delivering both durability and adaptability. Compatible
Compatibility and Customization
Our universal plate's adjustable mounting positions are its crowning feature, allowing for seamless integration with Next Level Racing® Cockpits such as the F-GT, GTLite, GTLite Pro, F-GT Lite, and Wheelstand 2.0. Universal Handbrake Plate is compatible with a wide range of shifter and handbrakes from Thrustmaster, Logitech, Fanatec, and Moza Racing.
*For more information regarding cockpit compatibility or electronic compatibility, please reach out to our Product Support Team at support@nextlevelracing.com
Robust Build for Enduring Performance
Constructed from premium carbon steel, our handbrake plate assembly promises longevity with its 3mm thickness and a high-quality matt powder-coated finish, ensuring it withstands the rigors of intense racing sessions. The plate's precise laser-cut design guarantees a perfect fit, while the durable hardware ensures your setup remains secure lap after lap.
Leading Features:
- Dual mounting options for Shifter and Handbrakes
- Compatible with the Next Level Racing® F-GT, F-GT Lite, GTLite, GTLite Pro, and Wheel Stand 2.0
- Compatible with shifters and handbrakes from most major brands
- Quick and easy installation to the cockpit
Introducing the Next Level Racing Universal Handbrake Plate –the ultimate solution that now allows you to mount both your shifter and handbrake to the cockpit simultaneously. The Universal Handbrake Plate is designed to provide a seamless, integrated experience for dual-control setups, delivering both durability and adaptability. Compatible
Compatibility and Customization
Our universal plate's adjustable mounting positions are its crowning feature, allowing for seamless integration with Next Level Racing® Cockpits such as the F-GT, GTLite, GTLite Pro, F-GT Lite, and Wheelstand 2.0. Universal Handbrake Plate is compatible with a wide range of shifter and handbrakes from Thrustmaster, Logitech, Fanatec, and Moza Racing.
*For more information regarding cockpit compatibility or electronic compatibility, please reach out to our Product Support Team at support@nextlevelracing.com
Robust Build for Enduring Performance
Constructed from premium carbon steel, our handbrake plate assembly promises longevity with its 3mm thickness and a high-quality matt powder-coated finish, ensuring it withstands the rigors of intense racing sessions. The plate's precise laser-cut design guarantees a perfect fit, while the durable hardware ensures your setup remains secure lap after lap.
Dispatch within:
2-5 working days (In stock Shop)
49,00 EUR
Dispatch within:
2-5 working days (In stock Shop)

Next Level Racing GT Elite Keyboard and Mouse Tray - Black
Leading features:
About:
The Next Level Racing® Elite Keyboard and Mouse Tray- Black Edition is the perfect add-on for the Elite series cockpit, giving sim racers easier and ergonomic access to their controls whilst in the driver’s seat. Assembled from anodized black aluminium and Carbon steel components, the Elite Keyboard and Mouse Tray offer height, angle, and articulation adjustability, making it the perfect upgrade for the Elite series cockpits.
Leading features:
- Black anodised aluminum extrusion for a premium finish
- Compatible with Next Level Racing® Elite Cockpit products
- Optimized swivel, angle, and tilt adjustability
- Customized Next Level Racing® Cable management clips included
About:
The Next Level Racing® Elite Keyboard and Mouse Tray- Black Edition is the perfect add-on for the Elite series cockpit, giving sim racers easier and ergonomic access to their controls whilst in the driver’s seat. Assembled from anodized black aluminium and Carbon steel components, the Elite Keyboard and Mouse Tray offer height, angle, and articulation adjustability, making it the perfect upgrade for the Elite series cockpits.
Dispatch within:
2-5 working days (In stock Shop)
119,00 EUR
Dispatch within:
2-5 working days (In stock Shop)

Next Level Racing® Flight Simulator Cockpit
LEADING FEATURES
LEADING FEATURES
- Dedicated flight cockpit for maximum simulation immersion
- Suited for Combat flight, General Aviation, Commercial flight, and Space Exploration users
- Compatible with flight electronics such as yokes, joysticks, rudders, and throttles for all major brands
- Wide range of adjustments to tailor your flight experience
- Includes keyboard and mouse support for easy navigation with custom Next Level Racing® keyboard and mouse pads
- Compatible with Thrustmaster® / Logitech / Saitek® / Honeycomb/ Virtual Fly/ Crosswind and other flight accessory brands
- Includes Buttkicker® Adaptor, Next Level Racing® Four-point harness, and Lumber Support
- Motion Compatible with added accessories**
Dispatch within:
2-5 working days (In stock Shop)
899,00 EUR
Dispatch within:
2-5 working days (In stock Shop)

Next Level Racing Elite Hardware Kit
Leadng Features:
About:
The Next Level Racing® Elite Hardware Kit is the perfect addition for any user that requires more hardware for your elite range cockpit or your do-it-yourself project for their do-it-yourself projects. With a wide range of bolts and T-nuts, the user has the option to add extra aluminium extrusion to their cockpit for the most customized simulation experience. The Next Level Racing® Elite Hardware Kit comes with a multitude of different fasteners, fixings, and tools to take your setup to the next level. The quality of components can be seen in other Elite products with the same amount of attention and detail.
Leadng Features:
- Includes a variety of Bolts to suit custom DIY setups for extrusion style cockpits
- Ultra-Low-profile hardware for use on front & side mount components
- Includes a wide range of comes with a multitude of different fasteners, fixings, and tools to take your setup to the next level
- Compatible with the Next Level Racing® Elite Series Cockpits and other extrusion type cockpits
About:
The Next Level Racing® Elite Hardware Kit is the perfect addition for any user that requires more hardware for your elite range cockpit or your do-it-yourself project for their do-it-yourself projects. With a wide range of bolts and T-nuts, the user has the option to add extra aluminium extrusion to their cockpit for the most customized simulation experience. The Next Level Racing® Elite Hardware Kit comes with a multitude of different fasteners, fixings, and tools to take your setup to the next level. The quality of components can be seen in other Elite products with the same amount of attention and detail.
Dispatch within:
Only on order - Ask for delivery time - No cancellation
119,00 EUR
Dispatch within:
Only on order - Ask for delivery time - No cancellation


Force2Motion Adapter System Motion Platform Plus - Additional Bracing Rocker Top FGT
When mounting only one Motion Platform Plus in combination with the NLR FGT cockpit, an additional stiffening profile is required for height compensation.
The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.
Scope of delivery:
Dimensions: approx. 80mm x 560mm x 120mm
Net weight: approx. 3,5 kg
The profile is only available in black powder coated.
When mounting only one Motion Platform Plus in combination with the NLR FGT cockpit, an additional stiffening profile is required for height compensation.
The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.
Scope of delivery:
- Crossbar 80x40 for rocker Powder coating black fine structure
- 4x angle pieces for fastening Powder coating black fine structure
- 2x plugs 80x40
- Slot nuts, screws, nuts and washers
- Instructions in German (English in preparation)
Dimensions: approx. 80mm x 560mm x 120mm
Net weight: approx. 3,5 kg
The profile is only available in black powder coated.
Dispatch within:
Only on order (No cancellation) - 2 to 4 weeks
from 99,00 EUR
Dispatch within:
Only on order (No cancellation) - 2 to 4 weeks

Next Level Racing® F-GT Elite Formula and GT Aluminium Profile Simulator Cockpit iRacing Edition
Fast Facts:
Fast Facts:
- All in one cockpit with quick adjustments for all driving positions including true formula, GT, Hybrid, Truck, and Tank
- Free 12 months iRacing® subscription for new users (110 USD Value)
- Rigid and highly adjustable mounting support included for your seat, wheel, pedals, shifter, handbrake
- Post anodized custom carbon grey (scratch resistant) aluminium profile with premium carbon steel powder coated components
- Pedal position height, angle and distance adjustable
- Pre-machined holes in aluminium profile for rigidity and ease of assembly
- Compatible and easy installation with Next Level Racing® Motion Platforms
- All the extra’s included such as NLR seat slider system, seat brackets, height adjustable shock absorption feet, gear shifter & handbrake support plate, foot step, Buttkicker® Gamer 2 adaptor, cable management clips, Motion Platform V3 adaptors, ratchet tool & more
- Premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
- T-slot extruded aluminium allows compatibility of accessories with other cockpit brands
- Fully enclosed base frame for strength and aesthetics
- Taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
- Compatible with all major brands of electronics for major brands of wheels, pedals and shifters including Fanatec, Thrustmaster, Logitech, Simxperience and many more
Dispatch within:
1 to 2 Weeks (In stock central warehouse)
1.249,00 EUR
Dispatch within:
1 to 2 Weeks (In stock central warehouse)

Next Level Racing GTTrack Cockpit frame only (without seat)
Pleae note: This article contains only the GTtrack frame without the seat (limited availability)! If you need a complete cockpit, please order the products "Next Level Racing GTtrack" .
The new Next Level Racing GTtrack Cockpit presented at the SimRacingExpo 2018 can be tested in our showroom. An order is already possible. The system is expected to be available from end of November. Pre-orders will be accepted immediately and delivered in order of purchases. First come first serve.
The GTtrack is the ultimate cockpit for serious sim racers looking for rigidity, complete adjustability and a true race car seating position. The GTtrack has been designed with the close feedback of professional drivers and some of the world's fastest eSports drivers to give you every feature required for serious sim racing. The complete rigidity of the GTtrack allows it to support direct drive wheels and professional pedal sets as weil as being compatible with all major wheel and pedals including Thrustmaster®, Logitech® and Fanatec®.
Pleae note: This article contains only the GTtrack frame without the seat (limited availability)! If you need a complete cockpit, please order the products "Next Level Racing GTtrack" .
The new Next Level Racing GTtrack Cockpit presented at the SimRacingExpo 2018 can be tested in our showroom. An order is already possible. The system is expected to be available from end of November. Pre-orders will be accepted immediately and delivered in order of purchases. First come first serve.
The GTtrack is the ultimate cockpit for serious sim racers looking for rigidity, complete adjustability and a true race car seating position. The GTtrack has been designed with the close feedback of professional drivers and some of the world's fastest eSports drivers to give you every feature required for serious sim racing. The complete rigidity of the GTtrack allows it to support direct drive wheels and professional pedal sets as weil as being compatible with all major wheel and pedals including Thrustmaster®, Logitech® and Fanatec®.
599,00 EUR


Force2Motion Motion Platform Plus Adapter System - Base Support (bottom)
With the F2M adapter system Motion Platform Plus it is possible to mount one or two Motion Platform Plus on the Traction Plus. Depending on the rider's weight (75-100 kg) and the mounted cockpit, an additional V3 can then be inserted into the cockpit.
The system consists of a lower (mandatory) and upper (optional) carrier system. Depending on the cockpit used, the upper carrier may or may not be required. The lower carrier is called the basic set and contains the floor plates 150mm and two cross members with bracing plates for Traction-Plus mounting. These parts are not or only partially needed for the upper beam (extension set), as the Motion-Plus platforms are located at this point. The upper support can also be used on its own to extend the Wheel Stands DD and 2.0 with one or two Motion-Plus platforms and a V3 to a Motion Cockpit.
The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.
The basic carrier (below) is required for the following cockpits and motion platforms:
With the F2M adapter system Motion Platform Plus it is possible to mount one or two Motion Platform Plus on the Traction Plus. Depending on the rider's weight (75-100 kg) and the mounted cockpit, an additional V3 can then be inserted into the cockpit.
The system consists of a lower (mandatory) and upper (optional) carrier system. Depending on the cockpit used, the upper carrier may or may not be required. The lower carrier is called the basic set and contains the floor plates 150mm and two cross members with bracing plates for Traction-Plus mounting. These parts are not or only partially needed for the upper beam (extension set), as the Motion-Plus platforms are located at this point. The upper support can also be used on its own to extend the Wheel Stands DD and 2.0 with one or two Motion-Plus platforms and a V3 to a Motion Cockpit.
The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.
The basic carrier (below) is required for the following cockpits and motion platforms:
- NLR GT Elite Cockpit on Traction Plus (with Next Level Racing® GTElite Motion Adaptor Upgrade Kit).
- NLR FGT Elite Cockpit on Traction Plus
- NLR GTTrack Cockpit on Traction Plus
- NLR GTTrack Wheel Stand on Traction Plus (extension bracket required)
- NLR Wheel Stand 2.0 on Traction Plus (extension carrier required)
- NLR FGT Cockpit on Traction Plus (extension carrier required)
- NLR FGT Cockpit on Traction Plus (only extension carrier required - you do need the base support (bootom) for this!)
- Custom-built cockpits and third-party cockpits with Motion Plus on Traction Plus (Please enquire and seek advice individually!).
Dispatch within:
2-5 working days (In stock Shop)
489,00 EUR
Dispatch within:
2-5 working days (In stock Shop)

Next Level Racing Race-Seat Elite ES1 Seat Scuderia Ferrari Edition
Fast Facts:
An Official Ferrari Licensed Product: The Next Level Racing® Elite ES1 Scuderia Ferrari Edition is designed and developed for the most demanding sim racer using both virtual and real motorsport industry feedback. The Elite ES1 Scuderia Ferrari Edition Seat has been manufactured using a five-axis roto-molded process to provide optimal support and rigidity at every mounting position. Drivers will enjoy the high-quality motorsport inspired platform embossed PU molded foam suede cushions for countless hours of racing. The Elite ES1 Scuderia Ferrari Edition Seat is the perfect seat solution for every genre of sim racing. Adorned with the fabled Italian brand’s Scuderia Ferrari Racing Shield, embossed motorsport racing seat molded foam, it is the perfect addition to the F-GT Elite 160 Scuderia Ferrari Edition Cockpit*.
*F-GT Elite 160 Scuderia Ferrari Edition Cockpit is sold separately
Video: https://youtu.be/LZWPp3BtKzQ
The Force2Motion tip: do you really value the Ferrari logo? If not, take a look at the standard version of the ES1. It's much cheaper and we usually have it in stock...
Fast Facts:
- Eergonomically designed and engineered specifically for sim racing
- Official Ferrari licensed product
- Compatible with all side mounting seat brackets
- PU molded foam with premium suede finish
- Five-axis rotationally molded polymer seat for ultimate tensile strength
- Next Level Racing branded red seat belts included for increased immersion and motion users
- Comfortably fit users up to 42” waist and built rigid to support up to 250kg users
An Official Ferrari Licensed Product: The Next Level Racing® Elite ES1 Scuderia Ferrari Edition is designed and developed for the most demanding sim racer using both virtual and real motorsport industry feedback. The Elite ES1 Scuderia Ferrari Edition Seat has been manufactured using a five-axis roto-molded process to provide optimal support and rigidity at every mounting position. Drivers will enjoy the high-quality motorsport inspired platform embossed PU molded foam suede cushions for countless hours of racing. The Elite ES1 Scuderia Ferrari Edition Seat is the perfect seat solution for every genre of sim racing. Adorned with the fabled Italian brand’s Scuderia Ferrari Racing Shield, embossed motorsport racing seat molded foam, it is the perfect addition to the F-GT Elite 160 Scuderia Ferrari Edition Cockpit*.
*F-GT Elite 160 Scuderia Ferrari Edition Cockpit is sold separately
Video: https://youtu.be/LZWPp3BtKzQ
The Force2Motion tip: do you really value the Ferrari logo? If not, take a look at the standard version of the ES1. It's much cheaper and we usually have it in stock...
Dispatch within:
1 to 2 Weeks (In stock central warehouse)
499,00 EUR
Dispatch within:
1 to 2 Weeks (In stock central warehouse)


F2M Shifter Extension Short for Aluminium Cockpits
When installing a Next Level Racing V3 in an alloy cockpit, it can happen that the seat collides with a shifter mount on the alloy cockpit. For this purpose, a black anodised profile 80x40 shortened to 300 mm is offered, which replaces a standard profile (e.g. the 580mm one on the Trakracer 160).
When installing a Next Level Racing V3 in an alloy cockpit, it can happen that the seat collides with a shifter mount on the alloy cockpit. For this purpose, a black anodised profile 80x40 shortened to 300 mm is offered, which replaces a standard profile (e.g. the 580mm one on the Trakracer 160).
Dispatch within:
2-5 working days (In stock Shop)
49,00 EUR
Dispatch within:
2-5 working days (In stock Shop)

Next Level Racing F-GT Elite 160 Front and Side Mount Edition - BLACK
Leading features:
The Next Level Racing® F-GT Elite 160 Front & Side Mount Edition is the definitive, premier simulator cockpit. Built for the Elite, the F-GT Elite 160 Front & Side Mount Edition is designed for racers who demand the highest quality and uncompromised rigidity for racing.
The Next Level Racing® F-GT Elite 160 Front & Side Mount Edition is the result of extensive research and feedback and is unrivaled when it comes to flex-free, high quality aluminium extrusion simulation cockpits. The F-GT Elite 160 Front & Side Mount Edition sets the benchmark for quality and rigidity - from the premium anodised high-grade aluminium extrusion and powder-coated carbon steel components to the bespoke Next Level Racing® end caps and T-slot nuts.
Racers will feel at home in the F-GT Elite 160, with near-infinite adjustability and customisation options available, and is also compatible with the Next Level Racing® Motion Ecosystem*. Featuring industry-leading materials in combination with fine-tuning adjustability and compatibility, the F-GT Elite 160 Front & Side Mount Edition offers the most premium immersive simulation experience on the market.
*The Next Level Racing® F-GT Elite 160 is compatible with the Next Level Racing® Motion Platform V3, Motion Plus Platform. Users can attach two Motion Plus Platforms. Users wanting to attach the Traction Plus Platform to the cockpit require the Next Level Racing® Elite Motion Adaptor Upgrade Kit.
Leading features:
- The ultimate, no compromise, all-in-one 160 aluminium profile racing cockpit for the Elite sim racers
- Offering multi-position Formula, Hybrid, GT, Truck, and Tank driving ergonomics
- Premium black anodised aluminium profile with high quality powder-coated carbon steel components and pre-machined holes for ease of assembly and rigidity.
- Compatible with the Next Level Racing® Motion Platforms*
- Pre-Drilled for Universal compatibility with major steering wheels, pedals, shifter, and handbrake manufacturers
- Industry benchmark aluminium extrusion design with bespoke Next Level Racing® End Caps & T-Slot nuts, and Next Level Racing® Flex-Free Seat Sliders and custom Next Level Racing® shoulder bolts
- Custom NLR 160mm X 40mm aluminium profile base for strength and rigidity
The Next Level Racing® F-GT Elite 160 Front & Side Mount Edition is the definitive, premier simulator cockpit. Built for the Elite, the F-GT Elite 160 Front & Side Mount Edition is designed for racers who demand the highest quality and uncompromised rigidity for racing.
The Next Level Racing® F-GT Elite 160 Front & Side Mount Edition is the result of extensive research and feedback and is unrivaled when it comes to flex-free, high quality aluminium extrusion simulation cockpits. The F-GT Elite 160 Front & Side Mount Edition sets the benchmark for quality and rigidity - from the premium anodised high-grade aluminium extrusion and powder-coated carbon steel components to the bespoke Next Level Racing® end caps and T-slot nuts.
Racers will feel at home in the F-GT Elite 160, with near-infinite adjustability and customisation options available, and is also compatible with the Next Level Racing® Motion Ecosystem*. Featuring industry-leading materials in combination with fine-tuning adjustability and compatibility, the F-GT Elite 160 Front & Side Mount Edition offers the most premium immersive simulation experience on the market.
*The Next Level Racing® F-GT Elite 160 is compatible with the Next Level Racing® Motion Platform V3, Motion Plus Platform. Users can attach two Motion Plus Platforms. Users wanting to attach the Traction Plus Platform to the cockpit require the Next Level Racing® Elite Motion Adaptor Upgrade Kit.
Dispatch within:
1 to 2 Weeks (In stock central warehouse)
1.299,00 EUR
Dispatch within:
1 to 2 Weeks (In stock central warehouse)

Next Level Racing Elite - DD Side & Front Mount Adaptor
Fast Facts:
The Next Level Racing® Elite DD Side and Front Mount Adapter is the perfect upgrade for Elite Series cockpits, enabling sim racers to front or side mount all major Direct Drive wheelbases. Assembled from premium components, the Elite DD Side and Front Mount Adapter is the perfect solution for a wide variety of steering wheel mount configurations.
Fast Facts:
- High-quality, precision-made brackets offer the best Direct Drive mount for the Elite Series
- Constructed from CNC machined 6061 solid anodized aluminium and precision folded carbon steel parts
- Compatible with BOTH front mount and side mounting direct drive wheels from all leading brands to support customer wheel upgrades
The Next Level Racing® Elite DD Side and Front Mount Adapter is the perfect upgrade for Elite Series cockpits, enabling sim racers to front or side mount all major Direct Drive wheelbases. Assembled from premium components, the Elite DD Side and Front Mount Adapter is the perfect solution for a wide variety of steering wheel mount configurations.
Dispatch within:
2-5 working days (In stock Shop)
199,00 EUR
Dispatch within:
2-5 working days (In stock Shop)

Next Level Racing Race-Seat ES1 Ford - Edition
Fast Facts:
The Next Level Racing® Elite ES1 seat is designed and developed for the most demanding sim racer using both virtual and real motorsport industry feedback. Manufactured using a five-axis roto-molded process to provide optimal support and rigidity at every mounting position. Drivers will enjoy the high-quality PU molded foam suede cushions over countless hours of racing. The Elite ES1 is a versatile solution for every type of sim racer.
Fast Facts:
- Ergonomically designed and engineered specifically for sim racing
- Compatible with all side mounting seat brackets
- Five-axis Rotationally molded polymer seat for ultimate tensile strength
- PU molded Foam with premium suede finish
- Next Level Racing seat belts included for increased immersion and motion users
- Comfortably fit users up to 42” waist and built rigid to support up to 250 kg users
The Next Level Racing® Elite ES1 seat is designed and developed for the most demanding sim racer using both virtual and real motorsport industry feedback. Manufactured using a five-axis roto-molded process to provide optimal support and rigidity at every mounting position. Drivers will enjoy the high-quality PU molded foam suede cushions over countless hours of racing. The Elite ES1 is a versatile solution for every type of sim racer.
449,00 EUR


F2M Floor Plate Aluminium Cockpit
The F2M floor plate is installed in aluminium cockpits (e.g. Track Racer) and prevents the driver from stepping on the centre module of the NLR Traction Plus when the cockpit is mounted on it.
The plate consists of a 5mm thick folded aluminium sheet, powder-coated in black fine structure with corresponding holes for mounting on the aluminium profiles of the cockpit. The set is delivered with 6x screws and groove stones I-profile M8.
The F2M floor plate is installed in aluminium cockpits (e.g. Track Racer) and prevents the driver from stepping on the centre module of the NLR Traction Plus when the cockpit is mounted on it.
The plate consists of a 5mm thick folded aluminium sheet, powder-coated in black fine structure with corresponding holes for mounting on the aluminium profiles of the cockpit. The set is delivered with 6x screws and groove stones I-profile M8.
Dispatch within:
2-5 working days (In stock Shop)
179,00 EUR
Dispatch within:
2-5 working days (In stock Shop)

-15%
Next Level Racing® Flight Simulator Cockpit - BOEING COMMERCIAL EDITION
LEADING FEATURES
LEADING FEATURES
- Dedicated flight cockpit for maximum simulation immersion
- Suited for Combat flight, General Aviation, Commercial flight, and Space Exploration users
- Compatible with flight electronics such as yokes, joysticks, rudders, and throttles for all major brands
- Wide range of adjustments to tailor your flight experience
- Includes keyboard and mouse support for easy navigation with custom Next Level Racing® keyboard and mouse pads
- Compatible with Thrustmaster® / Logitech / Saitek® / Honeycomb/ Virtual Fly/ Crosswind and other flight accessory brands
- Includes Buttkicker® Adaptor, Next Level Racing® Four-point harness, and Lumber Support
- Motion Compatible with added accessories**
Dispatch within:
2-5 working days (In stock Shop)
Only 759,00 EUR
Dispatch within:
2-5 working days (In stock Shop)

NEXT LEVEL RACING GTElite Lite Racing Simulator Cockpit - Wheel Plate Edition
Leading features:
Build your own Elite Journey with the best value aluminium profile cockpit. The GTElite Lite cockpit’s patent-pending design brings rigidity and stability into a new price point making it the best mid-range aluminium profile cockpit on the market. With attention to detail and engineering as seen on our Elite series, the GTElite Lite compared to mid-range cockpits in its class is more rigid, easier to assemble, provides more inclusions, while providing a higher quality finish.
While constructed to suit the mid-range category with a “4080” profile, through cutting edge engineering and manufacturing, combined with unique components, fixtures, and reinforcements, the GTElite Lite is the most rigid mid-range cockpit. Through this innovative process, the GTElite Lite in some cases is stronger than conventional “16040” cockpits seen on the market.
With an extensive ecosystem in mind, the GTElite Lite is upgradable to be compatible with Next Level Racing® Motion Products and can be transformed into a multi-position cockpit solution with the ready set kits*.
*Motion Kit and Formula kit need to be purchased separately.
Leading features:
- Dedicated gt cockpit with the most authentic and adaptable driving position
- Premium anodized black aluminium finish
- Pre-machined precision holes in aluminium profile for rigidity and ease of assembly
- All the extra’s included such as nlr flex free seat slider system, height adjustable shock absorption feet, buttkicker® gamer 2 adaptor, cable management clips, and tool kit holder
- Taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
- Rigid and highly adjustable mounting supports included for your seat, wheel, pedals,
- Pedal position height, angle and distance adjustable
- Premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
- Fully enclosed base frame for strength and aesthetics as well as one piece aluminium profiles for rigidity required for motion
- Compatible with all major brands of electronics for major brands of wheels and pedals including fanatec, thrustmaster, logitech, simxperience and many more
- Upgradable to be compatible with next level racing® motion products and other accessories
Build your own Elite Journey with the best value aluminium profile cockpit. The GTElite Lite cockpit’s patent-pending design brings rigidity and stability into a new price point making it the best mid-range aluminium profile cockpit on the market. With attention to detail and engineering as seen on our Elite series, the GTElite Lite compared to mid-range cockpits in its class is more rigid, easier to assemble, provides more inclusions, while providing a higher quality finish.
While constructed to suit the mid-range category with a “4080” profile, through cutting edge engineering and manufacturing, combined with unique components, fixtures, and reinforcements, the GTElite Lite is the most rigid mid-range cockpit. Through this innovative process, the GTElite Lite in some cases is stronger than conventional “16040” cockpits seen on the market.
With an extensive ecosystem in mind, the GTElite Lite is upgradable to be compatible with Next Level Racing® Motion Products and can be transformed into a multi-position cockpit solution with the ready set kits*.
*Motion Kit and Formula kit need to be purchased separately.
Dispatch within:
1 to 2 Weeks (In stock central warehouse)
599,00 EUR
Dispatch within:
1 to 2 Weeks (In stock central warehouse)

-33%
Next Level Racing GT Elite Formula and Hybrid Pedal Upgrade Kit
Leading Features:
The Elite Formula and Hybrid Upgrade Kit transforms the Elite series cockpits** into an ultra-versatile cockpit offering Formula, GT, and Hybrid driving positions. Cutting-edge laser cutting manufacturing has resulted in uncompromised rigidity, whilst offering the same attention to detail and quality as expected from our Elite range of cockpits. The Elite Formula and Hybrid Pedal Upgrade Kit also includes the Next Level Racing® Premium 5mm Carbon Steel Seat Brackets, giving sim racers 98 adjustment options to find their perfect seating position.
**Please note not all Elite cockpits require the Formula and Hybrid Upgrade Kit. This is for Elite cockpits that only offer GT position and the user wants to upgrade to a multiple-position cockpit.
Leading Features:
- Converts Next Level Racing® Elite into a Formula and Hybrid racing cockpit**
- Increased range of 70 degrees of tilt for pedal positioning
- Constructed from the highest quality premium Carbon Steel
- Next Level Racing® Premium 5mm Carbon Steel Seat Brackets with 98 adjustment options
The Elite Formula and Hybrid Upgrade Kit transforms the Elite series cockpits** into an ultra-versatile cockpit offering Formula, GT, and Hybrid driving positions. Cutting-edge laser cutting manufacturing has resulted in uncompromised rigidity, whilst offering the same attention to detail and quality as expected from our Elite range of cockpits. The Elite Formula and Hybrid Pedal Upgrade Kit also includes the Next Level Racing® Premium 5mm Carbon Steel Seat Brackets, giving sim racers 98 adjustment options to find their perfect seating position.
**Please note not all Elite cockpits require the Formula and Hybrid Upgrade Kit. This is for Elite cockpits that only offer GT position and the user wants to upgrade to a multiple-position cockpit.
Dispatch within:
2-5 working days (In stock Shop)
Only 99,00 EUR
Dispatch within:
2-5 working days (In stock Shop)
This product was added to our catalog on Friday, October 12, 2018.
For more information, please visit the home page for this product.