Next Level Racing Universal Seat Brackets for GTtrack and FGT

Next Level Racing FGT Formula and GT Simulator Cockpit

What’s In The Box

• Next Level Racing FGT frame and seat including seat slider
• Gear shifter holder (can be mounted on left or right side)
• Next Level Racing lumbar support cushion
• Screws to hard mount Your Wheel
• Instructions for Quick and Easy Assembly

Attention: Not compatible with the Next Level Racing Motion Platform!

Next Level Racing GTTrack Cockpit

The GTtrack is the ultimate cockpit for serious sim racers looking for rigidity, complete adjustability and a true race car seating position. The GTtrack was designed with the close feedback of professional drivers and some of the world's fastest eSports drivers to give you every feature required for serious sim racing. The complete rigidity of the GTtrack allows it to support direct drive wheels and professional pedal sets as weil as being compatible with all major wheel and pedals including Thrustmaster®, Logitech® and Fanatec®.

Features:

• Steering wheel angle and distance adjustability. Pedal angle and distance adjustbility
• Gear shifter distance adjustable
• Pre-drilled for all major brands including Thrustmaster®, Logitech® and Fanatec®
• Built with rigidity to support direct drive wheels and professional pedal sets
• Built with motion in mind - The Next Level Racing® Motion Platform V3 bolts straight on in less than 10 minutes and fully compatible with the Next Level Racing® Traction+ Motion Platform
• lncluded handbrake support for both Thrustmaster® and Fanatec® handbrakes
• Buttkicker Gamer 2 Adapter
• Height adjustable rubber feet and Next Level Racing® Lockable Wheel Gastors
• Box dimensions 100 x 61 x 59 cm - 60 kg

Next Level Racing Motion Plus Platform (Cockpit-Mover)

Note: We have developed an adapter system to run two Motion Plus platforms plus a V3 on a Traction Plus system. Further information: https://www.force2motion.de/en/motion-the-beast/force2motion-adapter-system-motion-platform-plus/


All good things come in threes: With the new Motion Plus Platform, Next Level Racing is expanding the Motion Eco System of the Motion Platform V3 and the Traction Plus System with a third component. Now it is also possible with the Next Level Racing systems not only to tilt the seat (Seat Mover) or to move the cockpit sideways to simulate oversteer and understeer (Cockpit Slider or Mover), but also to raise the entire cockpit. In contrast to other concepts (such as our Beast), the lifting is not realised by individual actuators (such as those of ProSimu or the Qubic system) but by one or two integrated modules that are mounted under the cockpit. The Next Level Racing cockpits GTTrack, GT- or FGT-Elite and even the FGT cockpit are supported as standard (with adapters if necessary), which until now had to remain completely outside the scope of the motion upgrade. But we will also support cockpits from other manufacturers in the future.

Leading Features:

• Full Cockpit Mover, simulating vehicle chassis motion with ultimate precision and accuracy
• Market leading technology to feel bumps, corners, rolls, gear shifts and vibrations for peak immersion
• Quick and simple installation, compatible with the Next Level Racing cockpits
• Commercially bulit, but perfect for home use with its compact design and low noise opertaion
• Compatible with all major racing and flight games for PC (Windows)
• 1 Module for 2-DOF and **2 modules for 3-DOF
• Adaotbale to the existing Next Level Racing Motion Ecosystem to continue taking racing to the next level
• Unique pivot bar included for single unit use setups
• Advanced VR Compensation Software to experience smooth prcise VR movement
• Ultra-low latency provides sharp and accurate movement throughout the chassis

Build the complete ecosystem

With a multitude of configurations, the Next Level Racing® Motion Plus Platform allows to adapt and design your own custom motion experience. A singular unit of Motion Plus platform will provide the user with 2-DOF experience, and allows them to upgrade to a 3-DOF with an addition of a second unit offering pitch, roll, and heave. The combination of different Next Level Racing® Motion Platforms and the Motion Plus Platform, can provide up to 4-DOF.

• Single Motion Plus Platform: Chassis 2 DOF
• 2 X Motion Plus Platform: Chassis 3-DOF
• Motion Plus Platform + Motion Platform V3: Chassis 2 DOF & Seat 2 DOF (Combined 2 DOF)
• 2 X Motion Plus Platform+ Motion Platform V3: Chassis 3 DOF & Seat 2 DOF (Combined 3 DOF)
• Motion Plus Platform + Traction Plus Platform: Combined Chassis 4 DOF

What's in the box:

• Next Level Racing® Motion Plus Platform
• Foot Assembly kit
• Pivot bar
• Next Level Racing® Platform Manager Software download
• USB and Power Cables
• Digital assembly instructions and assembly videos available here: http://bit.ly/nlr-instructions

Important note: The Motion Platform Plus does not replace the Motion Platform V3 or the Traction Plus Systems, but complements these systems! It is just as possible to operate the individual systems as it is to combine all modules!

Important note: The Motion Platform Plus is not compatible with the Beast. Here we follow a fundamentally different concept. Which is better? Find out. We expect to have the Motion Platform Plus in the showroom for testing and comparison from April 2022. Then you will be spoilt for choice.

Next Level Racing Motion Platform V3 - WEEE-Reg.-Nr. DE 11344112

Attention: for options and accessories also see the alternative article "Next Level Racing Motion Platform V3 - KIT"!

• Next Level Racing® V3 Motion Platform
• Next Level Racing® Platform Manager Software (Download)
• USB cable
• Power cable
• Steel side panels to directly bolt on to your Next Level Racing® GTultimate Cockpit, Next Level Flight Simulator or retrofit to your existing cockpit
• Manual (english)

Next Level Racing Motion Platform V3 KIT (Seat-Mover) - Details see options

With this article, an adapter kit for various cockpits can be optionally ordered at a preferential price. An SDK can also be added.

WEEE-Reg.-Nr. DE 11344112

• Next Level Racing® V3 Motion Platform
• Next Level Racing® Platform Manager Software (Download)
• USB cable
• Power cable
• Steel side panels to directly bolt on to your Next Level Racing® GTultimate Cockpit, Next Level Flight Simulator or retrofit to your existing cockpit
• Manual (english)

Force2Motion 4 DOF ProSimu Kit 100mm

• ProSimu actuator set with 4x 100 mm stroke and control unit and Simtools software
• WITHOUT Force2Motion adapter system ("The Beast")

Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!

Force2Motion Adapter Plate XL

The Force2Motion Adapter Plate XL is used to accommodate wide cockpits such as the Fanatec Cockpit V2 or do-it-yourself cockpits. The adapter plate consists of a two-part contoured and pre-drilled plate with two stiffening profiles. It fits the Force2Motion adapter system for NLR Traction Plus - size X (1060mm width).

Scope of delivery:

• 1x H.F2M.ADSSF.PLV.X.01: Adapter plate XL contoured front part.
• 1x H.F2M.ADSSF.PLH.X.01: Adapter plate XL contoured rear part
• 2x H.F2M.ADSSF.PLPRO.X.01: Stiffening profile adapter plate XL
• 1x H.F2M.ADSSF.PLSCR.X.01: Screw set adapter plate XL

Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!