Motion - The Beast

Motion - The Force2Motion
Motion - The Force2Motion "Beast"

Something is moving here. A static cockpit is nice, but it's really only the first step into sim racing. Or do you just stand in the garage with your car and it doesn't move?

Whether it should be a seat mover or a cockpit mover or a combination of both... You will find what you are looking for here. And what the "Beast" is all about should also become clear here...
Next Level Racing Motion Platform V3
TOP
Next Level Racing Motion Platform V3
Next Level Racing Motion Platform V3 - WEEE-Reg.-Nr. DE 11344112

Attention: for options and accessories also see the alternative article "Next Level Racing Motion Platform V3 - KIT"!
  • Next Level Racing® V3 Motion Platform
  • Next Level Racing® Platform Manager Software (Download)
  • USB cable
  • Power cable
  • Steel side panels to directly bolt on to your Next Level Racing® GTultimate Cockpit, Next Level Flight Simulator or retrofit to your existing cockpit
  • Manual (english)
3.499,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Next Level Racing Motion Platform V3 - KIT
TOP
-17%
Next Level Racing Motion Platform V3 KIT (Seat-Mover) - Details see options
Next Level Racing Motion Platform V3 KIT (Seat-Mover) - Details see options

With this article, an adapter kit for various cockpits can be optionally ordered at a preferential price. An SDK can also be added.

WEEE-Reg.-Nr. DE 11344112
  • Next Level Racing® V3 Motion Platform
  • Next Level Racing® Platform Manager Software (Download)
  • USB cable
  • Power cable
  • Steel side panels to directly bolt on to your Next Level Racing® GTultimate Cockpit, Next Level Flight Simulator or retrofit to your existing cockpit
  • Manual (english)
From only 2.899,00 EUR
incl. 19% tax excl. Shipping costs
Next Level Racing Motion Plus Platform (Cockpit-Mover)
TOP
Next Level Racing Motion Plus Platform (Cockpit-Mover)
Next Level Racing Motion Plus Platform (Cockpit-Mover)

Note: We have developed an adapter system to run two Motion Plus platforms plus a V3 on a Traction Plus system. Further information: https://www.force2motion.de/en/motion-the-beast/force2motion-adapter-system-motion-platform-plus/

All good things come in threes: With the new Motion Plus Platform, Next Level Racing is expanding the Motion Eco System of the Motion Platform V3 and the Traction Plus System with a third component. Now it is also possible with the Next Level Racing systems not only to tilt the seat (Seat Mover) or to move the cockpit sideways to simulate oversteer and understeer (Cockpit Slider or Mover), but also to raise the entire cockpit. In contrast to other concepts (such as our Beast), the lifting is not realised by individual actuators (such as those of ProSimu or the Qubic system) but by one or two integrated modules that are mounted under the cockpit. The Next Level Racing cockpits GTTrack, GT- or FGT-Elite and even the FGT cockpit are supported as standard (with adapters if necessary), which until now had to remain completely outside the scope of the motion upgrade. But we will also support cockpits from other manufacturers in the future.

Leading Features:
  • Full Cockpit Mover, simulating vehicle chassis motion with ultimate precision and accuracy
  • Market leading technology to feel bumps, corners, rolls, gear shifts and vibrations for peak immersion
  • Quick and simple installation, compatible with the Next Level Racing cockpits
  • Commercially bulit, but perfect for home use with its compact design and low noise opertaion
  • Compatible with all major racing and flight games for PC (Windows)
  • 1 Module for 2-DOF and **2 modules for 3-DOF
  • Adaotbale to the existing Next Level Racing Motion Ecosystem to continue taking racing to the next level
  • Unique pivot bar included for single unit use setups
  • Advanced VR Compensation Software to experience smooth prcise VR movement
  • Ultra-low latency provides sharp and accurate movement throughout the chassis
2.999,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Force2Motion DEMO system
NEW
TOP
-50%
Force2Motion DEMO system "The little beast"
Force2Motion DEMO system "The little beast"

We need space in our showroom: That's why we have a special offer. We are selling our "little beast" with Next Level Racing Traction PLus, Next Level Racing V3 and Next Level Raing Motion Plus incl. controller, monitor stand, 55" Smart TV plus gaming PC at a special price. The system has been in use for demos in our showroom for aprox. two years and is in top condition. Incl. 2-year warranty from date of purchase for private use (1 year for commercial use).

Scope of delivery:
  • Next Level Racing Traction Plus
  • Next Level Racing Motion Plus
  • Next Level Racing Motion Platform V3
  • Next Level Racing GT Track Cockpit incl. Sitz/Gurten/Sitzschiene
  • F2M Frame for Motion Plus
  • Next Level Racing Seatz ERS1
  • Next Level Racing Elite Monitorstand QUAD
  • Gaming PC (Intel Core i5-3570 3,4 GHZ, 32 GB RAM, Windows 11, 512GB SSD, Geforce 1080 TI) fully installed with all drivers and Assetto Corsa
  • 55" Smart TV
  • Keyboardwith Trackball
  • Fanatec CSL Pedales
  • Fanatec Clubsport Wheelbase
  • Fantec Porsche Steering Wheel
The system has a new price of approx. 18,000 €. We are selling it for half that price!

Delivery with forwarding agency on pallets. Preferably self-collection (after the obligatory test drive)
Only 8.999,00 EUR
incl. 19% tax excl. Shipping costs
Next Level Racing Traction Plus
TOP
Next Level Racing Traction Plus (Cockpit-Mover)
Next Level Racing Traction Plus (Cockpit-Mover)

(see also alternative article Next Level Racing Traction Plus - KIT for options)

Breathtaking realism and performance, incredible immersion and precision, superb technology, engineering and manufacturing…introducing the Next Level Racing® Traction Plus Motion Platform.

The Traction Plus combined with the Next Level Racing® Motion Platform V3 provides incredible levels of vehicle feedback to the driver to feel exactly what the vehicle is doing by precisely delivering
  • Sway
  • Surge
  • Roll
  • Pitch
  • Understeer and front traction loss – (critical feature usually only experienced in 6DOF motion platforms)
  • Oversteer and rear traction loss
  • Power slides and drifting                                                                          
  • Partial Heave                                                                                                                                     
  • Vehicle and Road effects such as road surface, bumps, wheel lock/spin, gear changes and more
  • Shunting effects (to feel side impact contact from opponents/wall)
What’s in The Box
  • Next Level Racing® Traction Plus Motion Platform
  • Next Level Racing® Platform Manager software download
  • USB and power cables including ferrite core
  • Nuts and Bolts required for assembly
  • Product Manual
  • Adaptor plates to bolt your Next Level Racing® GTtrack or Next Level Racing® Flight Simulator Pro cockpit (coming 2019) directly to the Traction Plus platform
  • Digital assembly instructions and assembly videos available here
Compatible Products
  • Next Level Racing GTtrack
  • Next Level Racing Flight Simulator Pro (coming 2019)
  • Next Level Racing Motion Platform V3 (Traction Plus is designed to combine with the V3 motion platform to provide a ground breaking motion simulator experience)
  • Other brand or DIY cockpits - As we experienced with the Motion Platform V3, many customers also have the ability to create custom adaption to their cockpit and with the Traction Plus we expect to see the same with mounting holes on top of the platform that users can adapt to use with their own cockpit.
  • As with the Motion Platform V3 we do plan to release adaptors for other brand of cockpits
Compatible Operating System

The Platform Manager works only (!) with a Microsoft® Windows Operating System. So you will definitly need a Windows PC. No support for consoles like Xbox® or Playstation®!

Please note:
PC, V3, Cockpit, Games, Monitor, Monitorstands, Carpet, Controls etc. shown on the pictures are not included. 
5.999,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Next Level Racing Traction Plus - KIT
TOP
Next Level Racing Traction Plus KIT (Cockpit-Mover)
Next Level Racing Traction Plus KIT (Cockpit-Mover)

With this article, an adapter kit for various cockpits as well as special F2M accessories can optionally be ordered at a preferential price.

Breathtaking realism and performance, incredible¬ immersion and precision, superb technology, engineering and manufacturing…introducing the Next Level Racing® Traction Plus Motion Platform.

The Traction Plus combined with the Next Level Racing® Motion Platform V3 provides incredible levels of vehicle feedback to the driver to feel exactly what the vehicle is doing by precisely delivering
  • Sway
  • Surge
  • Roll
  • Pitch
  • Understeer and front traction loss – (critical feature usually only experienced in 6DOF motion platforms)
  • Oversteer and rear traction loss
  • Power slides and drifting                                                                          
  • Partial Heave                                                                                                                                     
  • Vehicle and Road effects such as road surface, bumps, wheel lock/spin, gear changes and more
  • Shunting effects (to feel side impact contact from opponents/wall)
What’s in The Box
  • Next Level Racing® Traction Plus Motion Platform
  • Next Level Racing® Platform Manager software download
  • USB and power cables including ferrite core
  • Nuts and Bolts required for assembly
  • Product Manual
  • Adaptor plates to bolt your Next Level Racing® GTtrack or Next Level Racing® Flight Simulator Pro cockpit (coming 2019) directly to the Traction Plus platform
  • Digital assembly instructions and assembly videos available here
Compatible Products
  • Next Level Racing GTtrack
  • Next Level Racing Flight Simulator Pro (coming 2019)
  • Next Level Racing Motion Platform V3 (Traction Plus is designed to combine with the V3 motion platform to provide a ground breaking motion simulator experience)
  • Other brand or DIY cockpits - As we experienced with the Motion Platform V3, many customers also have the ability to create custom adaption to their cockpit and with the Traction Plus we expect to see the same with mounting holes on top of the platform that users can adapt to use with their own cockpit.
  • As with the Motion Platform V3 we do plan to release adaptors for other brand of cockpits
Compatible Operating System

The Platform Manager works only (!) with a Microsoft® Windows Operating System. So you will definitly need a Windows PC. No support for consoles like Xbox® or Playstation®!

Please note:
PC, V3, Cockpit, Games, Monitor, Monitorstands, Carpet, Controls etc. shown on the pictures are not included. 
from 5.999,00 EUR
incl. 19% tax excl. Shipping costs
Next Level Racing HF8 Haptic Feedback Gaming Pad
TOP
Next Level Racing HF8 Haptic Feedback Gaming Pad
Next Level Racing HF8 Haptic Feedback Gaming Pad

Main Features
  • See it, play it, feel it with advanced haptic perception at an affordable price
  • Eight individual vibration motors for the ultimate haptic experience
  • Enhanced gaming experience on PC via Next Level Racing® HFS plug-and-play software using telemetry data
  • Suitable for game consoles with 3.5mm audio jack (headset/speakers required for Playstation users)
  • Universal design for all types of seats, including gaming, sim racing and flight seats
  • Enhanced haptic experience for gaming, as well as VR, videos and music
  • Designed for sim racing, flight sims and first-person shooters

About

Go Beyond the sounds in gaming, music, and movies - Introducing the Next Level Racing HF8- Haptic Feedback Gaming Pad. Feel the immersive haptic experience with the eight strategically placed vibration zones that are powerful and localized for precision. The Next Level Racing® HF8 is optimized for different simulation games* for a unique in-game experience. The HF8 suits all gaming chair, racing/flight seat styles, and bodies comfortably for the best user experience. The HF8 includes plug-and-play PC software to provide you a multi-channel experience without the need of additional sound cards or amplifiers.

*Localization and intensity of each motor can only be adjusted through PC use and HFS software. Console players do not require the HFS software as the eight motors will work collectively through the audio output.
 
Product Video see: https://youtu.be/J9PVxBIjRfw
 
249,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Next Level Racing GTtrack Cockpit
TOP
-11%
Next Level Racing GTTrack Cockpit
Next Level Racing GTTrack Cockpit

The GTtrack is the ultimate cockpit for serious sim racers looking for rigidity, complete adjustability and a true race car seating position. The GTtrack was designed with the close feedback of professional drivers and some of the world's fastest eSports drivers to give you every feature required for serious sim racing. The complete rigidity of the GTtrack allows it to support direct drive wheels and professional pedal sets as weil as being compatible with all major wheel and pedals including Thrustmaster®, Logitech® and Fanatec®.

Features:
  • Steering wheel angle and distance adjustability. Pedal angle and distance adjustbility
  • Gear shifter distance adjustable
  • Pre-drilled for all major brands including Thrustmaster®, Logitech® and Fanatec®
  • Built with rigidity to support direct drive wheels and professional pedal sets
  • Built with motion in mind - The Next Level Racing® Motion Platform V3 bolts straight on in less than 10 minutes and fully compatible with the Next Level Racing® Traction+ Motion Platform
  • lncluded handbrake support for both Thrustmaster® and Fanatec® handbrakes
  • Buttkicker Gamer 2 Adapter
  • Height adjustable rubber feet and Next Level Racing® Lockable Wheel Gastors
  • Box dimensions 100 x 61 x 59 cm - 60 kg
Only 799,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Ready-To-Race-Bundle Built-To-Order
TOP
Force2Motion Ready-To-Race-Bundle Built-To-Order
Force2Motion Ready-To-Race-Bundle Built-To-Order

With this configurator you could put together a complete sim-racing-cockpit including PC by simply removing the options you don't want from the shopping cart. Attention: The bundle contains alternative items from which you have to choose!

If you have any questions, please call (+49 (0)2405/479490) or write an e-mail (service@force2motion.de).

Alternative configurations as well as upgrades and extensions with additional items are possible.
1,00 EUR
incl. 19% tax excl. Shipping costs
Ready-To-Race-Bundle 10K
TOP
Ready-To-Race-Bundle 10K
Ready-To-Race-Bundle 10K

With this bundle you get a configuration proposal for a sim racing cockpit incl. PC for a budget of about 10.000 € incl. VAT. (hence the designation "10K"). If a PC is included in the order, we will install all necessary drivers of the hardware that is also included. Please indicate in the remarks the desired installation language and, if applicable, the keyboard layout (German or English in each case).

If you have any questions, please call (+49 (0)2405/479490) or write an e-mail (service@force2motion.de).

Alternative configurations as well as upgrades and extensions with additional items are possible on request.
10.040,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Ready-To-Race-Bundle 15K
TOP
Ready-To-Race-Bundle 15K
Ready-To-Race-Bundle 15K

With this bundle you get a configuration proposal for a sim racing cockpit incl. PC for a budget of about 15.000 € incl. VAT. (hence the designation "15K"). If a PC is included in the order, we will install all necessary drivers of the hardware that is also included. Please indicate in the remarks the desired installation language and, if applicable, the keyboard layout (German or English in each case).

If you have any questions, please call (+49 (0)2405/479490) or write an e-mail (service@force2motion.de).

Alternative configurations as well as upgrades and extensions with additional items are possible on request.
15.731,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Ready-To-Race-Bundle 20K
TOP
Ready-To-Race-Bundle 20K
Ready-To-Race-Bundle 20K

With this bundle you get a configuration proposal for a sim racing cockpit incl. PC for a budget of about 20.000 € incl. VAT. (hence the designation "20K"). If a PC is included in the order, we will install all necessary drivers of the hardware that is also included. Please indicate in the remarks the desired installation language and, if applicable, the keyboard layout (German or English in each case).

If you have any questions, please call (+49 (0)2405/479490) or write an e-mail (service@force2motion.de).

Alternative configurations as well as upgrades and extensions with additional items are possible on request.
20.214,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Ready-To-Race-Bundle 25K
TOP
Ready-To-Race-Bundle 25K
Ready-To-Race-Bundle 25K

With this bundle you get a configuration proposal for a sim racing cockpit incl. PC for a budget of about 25.000 € incl. VAT. (hence the designation "25K"). If a PC is included in the order, we will install all necessary drivers of the hardware that is also included. Please indicate in the remarks the desired installation language and, if applicable, the keyboard layout (German or English in each case).

If you have any questions, please call (+49 (0)2405/479490) or write an e-mail (service@force2motion.de).

Alternative configurations as well as upgrades and extensions with additional items are possible on request.
27.220,85 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Ready-To-Race-Bundle 30K
TOP
Ready-To-Race-Bundle 30K
Ready-To-Race-Bundle 30K

With this bundle you get a configuration proposal for a sim racing cockpit incl. PC for a budget of about 30.000 € incl. VAT. (hence the designation "30K"). If a PC is included in the order, we will install all necessary drivers of the hardware that is also included. Please indicate in the remarks the desired installation language and, if applicable, the keyboard layout (German or English in each case).

If you have any questions, please call (+49 (0)2405/479490) or write an e-mail (service@force2motion.de).

Alternative configurations as well as upgrades and extensions with additional items are possible on request.
30.714,95 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Bundle Built-To-Order - Edition Traction Plus with PC
TOP
Bundle Built-To-Order - Edition Traction Plus with PC (Seat-Mover and Cockpit-Mover)
Bundle Built-To-Order - Edition Traction Plus with PC (Seat-Mover and Cockpit-Mover)

With this bundle you get a Sim-Racing-Cockpit based on the Next Level Racing Motion GTTrack with the Next Level Racing Motion Platform V3 and the Next Level Racing Traction Plus System incl. PC, keyboard and accessories, but WITHOUT monitor and controls (controller, pedals, steering wheel etc.). If a PC is included in the order, we will install all necessary drivers of the also included hardware. Please indicate in the remarks the desired installation language and if necessary the keyboard layout (German or English).

If you have any questions call (+49 (0)2405/479490) or write an e-mail (service@force2motion.de).

The bundle contains the following single items (for details on the respective items, please refer to the corresponding links of the products): Alternative configurations as well as upgrades and extensions with additional articles are possible.
13.594,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Force2Motion 8DOF - Motion-Simulator -
TOP
Force2Motion 8DOF - Motion-Simulator - "The Beast - NLR-Edition" (Seat-Mover and Cockpit-Mover)
Force2Motion 8DOF - Motion-Simulator - "The Beast - NLR-Edition" (Seat-Mover and Cockpit-Mover)
 
The ultimate combination of Seat-Mover and Full-Motion-Cockpit with Traction Loss

Attention: This is a bundle, which only consists of Cockpit and the required motion systems incl. adapter. You need an additional PC, monitor(s), pedals etc. There is a Built-To-Order article in the shop, which contains all possible options you can add or remove.
 
Our innovative Force2Motion 8DOF cockpit, exclusively manufactured in this combination, combines the GTTrack cockpit with Motion Platform V3 (Seat Mover) and the Traction Plus system (for oversteer and understeer effects) from Next Level Racing with the Cockpit Mover based on the ProSimu T1000 4M. As the "cream on top", a butt kicker is mounted, which transfers the vibrations from the engine, speed limiter and curb effects tactilely into the seat and thus onto the driver's body.
 
This turns the system into the ultimate racing and/or flying cockpit with 8 DOF. This product idea arose from the idea of putting together a complete cockpit with all conceivable options for our showroom in order to show our customers the respective effects of the individual motion systems on one system. After we had gained sufficient experience with the prototype, we completely redesigned the adapter system for combining the two worlds and had it manufactured in Germany. The adapter system is so modular that it is 100% compatible with the Next Level Racing Traction Plus system and can therefore be installed as an add-on between the GTTrack cockpit and Traction Plus. The adapter system can also be used to mount other cockpits than the GTTrack on the Next Level Racing Traction Plus system. For example, there is already an aluminium plate pre-drilled for RSeat RS1 and S1 cockpits, which can of course also be used for other cockpits and do-it-yourself projects by drilling appropriate holes.
 
The Beast: All-In-On for testing in our showroom

Fast Facts:
  • Cockpit with 4DOF plus Next Level Racing Motion Platform (Seat-Mover) with 2 DOF and Traction Plus (2 DOF)
  • 8 actuators plus Buttkicker
  • NLR GTTrack cockpit with seat adjustment
  • Racing seat (standard NLR - optional at extra charge ProSimu racing shell rigid)
  • Safety belts
  • Force2Motion adapter systems (optionally with or without mounting plate for third-party cockpits)
  • All necessary electronics, cables and screws including cables (power supply, signal converter USB)
  • Plastic housing and steel/alu frame
  • Very resistant paint (colour powder heated to 200 ° C on the structure)
  • Made of square tubes, ultra-precise laser cutting, allows maximum rigidity.
  • Compatible with many accessories and devices: Thrustmaster, Fanatec etc. (not included)
  • Power supply: Standard Schuko plug 110-240V - Power consumption approx. 500 Watt
  • Space requirements (footprint): length approx. 200 cm x width 120 cm (+ space for entry) x height 170 cm (upper edge of seat) - available width between actuators: 64 cm (max. cockpit width)
  • Weight (without cockpit, motion platforms and controls):
    • Static adapter incl. actuator holder and screws: 9.2 kg
    • Dynamic adapter incl. screws (without actuators): 8.5 kg
    • Actuators per piece: 8,3 kg
    • Adapter plate (optional): 6.8 kg
    • The recommended driver weight is 80-100 kg (depending on the equipment of the overall cockpit - official payload of the Traction Plus System is 235 kg)
  • Supported Games: Details see Simtools and Platform-Manager
    • Software is constantly updated as new games are released; Not every software title is equally well supported by every motion system.
22.274,00 EUR
incl. 19% tax excl. Shipping costs
FForce2Motion 8DOF - Motion-Simulator - The Beast - Fanatec Edition (Seat-Mover and Cockpit-Mover)
TOP
Force2Motion 8DOF - Motion-Simulator - The Beast - Fanatec Edition (Seat-Mover and Cockpit-Mover) - Kopie
Force2Motion 8DOF - Motion Simulator - The Beast - FGT Elite Edition (Seat-Mover and Cockpit-Mover)

The ultimate combination of Seat-Mover and Full-Motion-Cockpit with Traction Loss

Attention: This is a bundle which only consists of the cockpit and the necessary motion systems incl. adapters. You also need a PC, monitor(s), pedals etc.. For this purpose, there is a Built-To-Order article in the shop that contains all possible options that you can add or remove.

With the new FGT ELITE cockpit from Next Level Racing we have now found the third basis for our "Beast". Due to its construction with high-quality aluminium profiles, it fulfils several requirements that we have for a cockpit that is to be modularly expanded into a fully movable motion system:
  • High quality and stability
  • Accurate fit and a wide range of adjustment possibilities
  • Modularity
  • Compatibility with the Motion Platform V3 and the Traction Plus System as well as the ProSimu System
22.474,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Force2Motion 8DOF - Motion-Simulator - The Beast - Fanatec Edition (Seat-Mover and Cockpit-Mover)
TOP
Force2Motion 8DOF - Motion-Simulator - The Beast - Fanatec Edition (Seat-Mover and Cockpit-Mover)
Force2Motion 8DOF - Motion-Simulator - "The Beast - Fanatec Edition" (Seat-Mover and Cockpit-Mover)
 
The ultimate combination of Seat-Mover and Full-Motion-Cockpit with Traction Loss

Attention: This is a bundle, which only consists of Cockpit and the required motion systems incl. adapter. You need an additional PC, monitor(s), pedals etc. There is a Built-To-Order article in the shop, which contains all possible options you can add or remove.
 
Our innovative Force2Motion 8DOF cockpit, exclusively manufactured in this combination, combines the Fanatec Clupsport V2 Cockpit with Motion Platform V3 (Seat Mover) and the Traction Plus system (for oversteer and understeer effects) from Next Level Racing with the Cockpit Mover based on the ProSimu T1000 4M. As the "cream on top", a butt kicker is mounted, which transfers the vibrations from the engine, speed limiter and curb effects tactilely into the seat and thus onto the driver's body.
 
This turns the system into the ultimate racing and/or flying cockpit with 8 DOF. This product idea arose from the idea of putting together a complete cockpit with all conceivable options for our showroom in order to show our customers the respective effects of the individual motion systems on one system. After we had gained sufficient experience with the prototype, we completely redesigned the adapter system for combining the two worlds and had it manufactured in Germany. The adapter system is so modular that it is 100% compatible with the Next Level Racing Traction Plus system and can therefore be installed as an add-on between the Fanatec Clupsport V2 Cockpitt and Traction Plus. The adapter system can also be used to mount other cockpits on the Next Level Racing Traction Plus system.
 
The Beast: All-In-On for testing in our showroom (see here the NLR-Version)

Fast Facts:
  • Fanatec Clupsport V2 Cockpit with 4DOF plus Next Level Racing Motion Platform (Seat-Mover) with 2 DOF and Traction Plus (2 DOF)
  • 8 actuators plus Buttkicker
  • Fanatec Clupsport V2 Cockpit cockpit with seat adjustment and Force2Motion-Adaptersystem
  • Racing seat
  • Safety belts
  • Force2Motion adapter systems Size X
  • All necessary electronics, cables and screws including cables (power supply, signal converter USB)
  • Plastic housing and steel/alu frame
  • Very resistant paint (colour powder heated to 200 ° C on the structure)
  • Made of square/round tubes, ultra-precise laser cutting, allows maximum rigidity.
  • Compatible with many accessories and devices: Thrustmaster, Fanatec etc. (not included)
  • Power supply: Standard Schuko plug 110-240V - Power consumption approx. 500 Watt
  • Space requirements (footprint): length approx. 200 cm x width 120 cm (+ space for entry) x height 170 cm (upper edge of seat) - available width between actuators: 64 cm (max. cockpit width)
  • Weight (without cockpit, motion platforms and controls):
    • Static adapter incl. actuator holder and screws: 9.2 kg
    • Dynamic adapter incl. screws (without actuators): 8.5 kg
    • Actuators per piece: 8,3 kg
    • Adapter plate (optional): 6.8 kg
    • The recommended driver weight is 80-100 kg (depending on the equipment of the overall cockpit - official payload of the Traction Plus System is 235 kg)
  • Supported Games: Details see Simtools and Platform-Manager
    • Software is constantly updated as new games are released; Not every software title is equally well supported by every motion system.
23.322,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Force2Motion 4 DOF ProSimu Kit 100mm with F2M adapter system for NLR Traction Plus - Size L (980 mm width)
TOP
Force2Motion 4 DOF ProSimu Kit 100mm with F2M adapter system for NLR Traction Plus - Size L (980 mm width)
Force2Motion 4 DOF ProSimu Kit 100mm with F2M adapter system for NLR Traction Plus - Size L (980 mm width)
  • ProSimu actuator set with 4x 100 mm stroke and control unit and Simtools software
  • Force2Motion adapter system ("The Beast") to copy the ProSimu actuators with the Next Level Racing GTTrack cockpit and Traction Plus system
Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!
Observe maximum weights: The Next Level Racing Traction Plus System has a maximum payload of 235 kg. The Next Level Racing Motion Platform V3 allows a max. payload of 130 kg (incl. seat and seat-mounted accessories). Therefore, make sure that you do not exceed both values. The total weight of the cockpit depends on the accessories (controls) you have mounted and the driver's weight. Depending on the configuration, we recommend not exceeding the driver's face of 100 kg.
 
11.300,00 EUR
incl. 19% tax excl. Shipping costs
Set:
 
Force2Motion Adapter-System for NLR Traction Plus - Size L (980mm width)
TOP
Force2Motion Adapter-System for NLR Traction Plus - Size L (980mm width)
Force2Motion Adapter-System for NLR Traction Plus - Size L (980mm width)
  • Force2Motion adapter system ("The Beast") to combine the ProSimu actuators with the Next Level Racing GTTrack cockpit and Traction Plus system
  • Without Actors!
Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!
2.990,00 EUR
incl. 19% tax excl. Shipping costs
Force2Motion 4 DOF ProSimu Kit 100mm
TOP
Force2Motion 4 DOF ProSimu Kit 150mm
Force2Motion 4 DOF ProSimu Kit 150mm
  • ProSimu actuator set with 4x 150 mm stroke and control unit and Simtools software
  • WITHOUT Force2Motion adapter system ("The Beast")
  • Not usable with Traction Plus (Loss of Warranty)
Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!
9.886,00 EUR
incl. 19% tax excl. Shipping costs
Set:
 
Force2Motion Adapter-System Dynamic for NLR Traction Plus (Add-On) - Size L (980 mm width)
TOP
Force2Motion Adapter-System Dynamic for NLR Traction Plus (Add-On) - Size L (980 mm width)
Force2Motion Adapter-System Dynamic for NLR Traction Plus (Add-On) - Size L (980 mm width)
  • Force2Motion adapter system Dynamic for mounting of cockpits (third party manufacturers, self-made) on the Next Level Racing Traction Plus system
  • This is an expansion set for the static Force2Motion-Adapter to upgrade it to a complete adapter system
  • Without actuators and Traction Plus System!
With the static adapter it is possible to mount different cockpits on the Traction Plus System. The adapter is based on the Force2Motion adapter system "The Beast" and can be extended by purchasing the 4 DOF actuator set to get additional 4 DOF and move the whole cockpit.

Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!
 
1.800,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Force2Motion 4 DOF ProSimu Kit 100mm with F2M adapter system for NLR Traction Plus - Size X (1060mm width)
TOP
Force2Motion 4 DOF ProSimu Kit 100mm with F2M adapter system for NLR Traction Plus - Size X (1060mm width)
Force2Motion 4 DOF ProSimu Kit 100mm with F2M adapter system for NLR Traction Plus - Size X (1060mm width)
  • ProSimu actuator set with 4x 100 mm stroke and control unit and Simtools software
  • Force2Motion adapter system ("The Beast") to copy the ProSimu actuators with the Fanatec Clupsport V2 Cockpit (or similar) and Traction Plus system
  • F2M Baseplate X for Fanatec Cockpit (Fanatec Cickpit not included)
Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!
Observe maximum weights: The Next Level Racing Traction Plus System has a maximum payload of 235 kg. The Next Level Racing Motion Platform V3 allows a max. payload of 130 kg (incl. seat and seat-mounted accessories). Therefore, make sure that you do not exceed both values. The total weight of the cockpit depends on the accessories (controls) you have mounted and the driver's weight. Depending on the configuration, we recommend not exceeding the driver's face of 100 kg.
 
10.225,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Force2Motion Adapter-System for NLR Traction Plus - Size X (1060mm width)
TOP
Force2Motion Adapter-System for NLR Traction Plus - Size X (1060mm width)
Force2Motion Adapter-System for NLR Traction Plus - Size X (1060mm width)
  • Force2Motion adapter system ("The Beast") to combine the ProSimu actuators with the Fanatec Clubsport Cockpit V2 and Traction Plus system
  • Without Actors and cockpit!
Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!
 
3.100,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Force2Motion Adapter-System Static for NLR Traction Plus - Size S (880mm width)
TOP
Force2Motion Adapter-System Static for NLR Traction Plus - Size S (880mm width)
Force2Motion Adapter-System Static for NLR Traction Plus - Size S (880mm width)
  • Force2Motion adapter system Static for mounting cockpits (third party, self-built) on the Next Level Racing Traction Plus system
  • Without actuators and Traction Plus System!

With the static adapter it is possible to mount different cockpits on the Traction Plus System. The adapter is based on the Force2Motion adapter system "The Beast" and can be extended to the complete Force2Motion adapter system by purchasing the extension set to get additional 4 DOF and move the whole cockpit.

Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!
 
1.190,00 EUR
incl. 19% tax excl. Shipping costs
Force2Motion Adapter-System Static for NLR Traction Plus - Size L (980mm width)
TOP
Force2Motion Adapter-System Static for NLR Traction Plus - Size L (980mm width)
Force2Motion Adapter-System Static for NLR Traction Plus - Size L (980mm width)
  • Force2Motion adapter system Static for mounting cockpits (third party, self-built) on the Next Level Racing Traction Plus system
  • Without actuators and Traction Plus System!

With the static adapter it is possible to mount different cockpits on the Traction Plus System. The adapter is based on the Force2Motion adapter system "The Beast" and can be extended to the complete Force2Motion adapter system by purchasing the extension set to get additional 4 DOF and move the whole cockpit.

Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!
 
1.000,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Force2Motion Adapter-System RSeat-Edition S1 for NLR Traction Plus
TOP
Force2Motion Adapter-System RSeat-Edition S1 for NLR Traction Plus
Force2Motion Adapter-System RSeat-Edition S1 for NLR Traction Plus

With the Force2Motion adapter system RSeat-Edition it is possible to mount the Rseat S1 cockpit on the Traction Plus system.

Scope of delivery:
  • 2x side member for static adapter in black fine structure (SF).
  • 2x Cross member static in size R (for Rseat) in black fine structure (SF)
  • 1x Cockpit support crosswise for S1 in black fine structure (SF)
  • 2x spacer sleeves for cockpit on cross member
  • 4x sealing plugs 80x80 in black
  • All necessary screws
  • German manual
  • Without cockpit, Traction Plus System etc.
  • Weight: approx. 15 kg
Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. Assembly requires manual skills and tools (ratchet set, Allen key, open-end spanner set, etc.). When assembling the system, make sure that the total load of all components including the driver does not exceed the maximum payload of the NLR Traction Plus System of 235 kg.
1.439,00 EUR
incl. 19% tax excl. Shipping costs
Force2Motion Adapter-System RSeat-Edition N1 for NLR Traction Plus
TOP
Force2Motion Adapter-System RSeat-Edition N1 for NLR Traction Plus
Force2Motion Adapter-System RSeat-Edition N1 for NLR Traction Plus

With the Force2Motion adapter system RSeat-Edition it is possible to mount the Rseat N1 cockpit on the Traction Plus system.

Scope of delivery:
  • 2x side member for static adapter in black fine structure (SF).
  • 2x Cross member static in size R (for Rseat) in black fine structure (SF)
  • 4x sealing plugs 80x80 in black
  • All necessary screws
  • German manual
  • Without cockpit, Traction Plus System etc.
  • Weight: approx. 15 kg
Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. Assembly requires manual skills and tools (ratchet set, Allen key, open-end spanner set, etc.). When assembling the system, make sure that the total load of all components including the driver does not exceed the maximum payload of the NLR Traction Plus System of 235 kg.
1.339,00 EUR
incl. 19% tax excl. Shipping costs
Force2Motion Adapter-System RSeat-Edition RS1 for NLR Traction Plus
TOP
Force2Motion Adapter-System RSeat-Edition RS1 for NLR Traction Plus
Force2Motion Adapter-System RSeat-Edition RS1 for NLR Traction Plus

With the Force2Motion adapter system RSeat-Edition it is possible to mount the Rseat RS1 cockpit on the Traction Plus system.

Scope of delivery:
  • 2x side member for static adapter in black fine structure (SF).
  • 2x Cross member static in size R (for Rseat) in black fine structure (SF)
  • 2x Cockpit support crosswise for S1 in black fine structure (SF)
  • 4x sealing plugs 80x80 in black
  • All necessary screws
  • German manual
  • Without cockpit, Traction Plus System etc.
  • Weight: approx. 15 kg
Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. Assembly requires manual skills and tools (ratchet set, Allen key, open-end spanner set, etc.). When assembling the system, make sure that the total load of all components including the driver does not exceed the maximum payload of the NLR Traction Plus System of 235 kg.
1.489,00 EUR
incl. 19% tax excl. Shipping costs
Force2Motion Adapter-System Dynamic for NLR Traction Plus (Add-On) - Size S (880 mm width)
TOP
Force2Motion Adapter-System Dynamic for NLR Traction Plus (Add-On) - Size S (880 mm width)
Force2Motion Adapter-System Dynamic for NLR Traction Plus (Add-On) - Size S (880 mm width)
  • Force2Motion adapter system Dynamic for mounting of cockpits (third party manufacturers, self-made) on the Next Level Racing Traction Plus system
  • This is an expansion set for the static Force2Motion-Adapter to upgrade it to a complete adapter system
  • Without actuators and Traction Plus System!
With the static adapter it is possible to mount different cockpits on the Traction Plus System. The adapter is based on the Force2Motion adapter system "The Beast" and can be extended by purchasing the 4 DOF actuator set to get additional 4 DOF and move the whole cockpit.

Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!
 
1.995,00 EUR
incl. 19% tax excl. Shipping costs
Fanatec Clubsport Cockpit V2 - Modified for ForceMotion Beast
TOP
Fanatec Clubsport Cockpit V2 - Modified for ForceMotion Beast "Fanatec Edition"
Fanatec Clubsport Cockpit V2 - Modified for ForceMotion Beast "Fanatec Edition".

The new racing cockpit - Better than ever before! You will be thrilled by the improvements in stability and adjustability and will significantly increase your driving fun on the track.

The cockpit offered here is a modified version (pre-drilled) for mounting on the Force2Motion adapter system.
1.149,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Force2Motion 4 DOF ProSimu Kit 100mm
TOP
Force2Motion 4 DOF ProSimu Kit 100mm
Force2Motion 4 DOF ProSimu Kit 100mm
  • ProSimu actuator set with 4x 100 mm stroke and control unit and Simtools software
  • WITHOUT Force2Motion adapter system ("The Beast")
Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!
8.399,00 EUR
incl. 19% tax excl. Shipping costs
Set:
 
1 to 32 (from a total of 119)