Next Level Racing Motion Platform V3 KIT (Seat-Mover) - Details see options

Next Level Racing GTTrack Cockpit

The GTtrack is the ultimate cockpit for serious sim racers looking for rigidity, complete adjustability and a true race car seating position. The GTtrack was designed with the close feedback of professional drivers and some of the world's fastest eSports drivers to give you every feature required for serious sim racing. The complete rigidity of the GTtrack allows it to support direct drive wheels and professional pedal sets as weil as being compatible with all major wheel and pedals including Thrustmaster®, Logitech® and Fanatec®.

Features:

• Steering wheel angle and distance adjustability. Pedal angle and distance adjustbility
• Gear shifter distance adjustable
• Pre-drilled for all major brands including Thrustmaster®, Logitech® and Fanatec®
• Built with rigidity to support direct drive wheels and professional pedal sets
• Built with motion in mind - The Next Level Racing® Motion Platform V3 bolts straight on in less than 10 minutes and fully compatible with the Next Level Racing® Traction+ Motion Platform
• lncluded handbrake support for both Thrustmaster® and Fanatec® handbrakes
• Buttkicker Gamer 2 Adapter
• Height adjustable rubber feet and Next Level Racing® Lockable Wheel Gastors
• Box dimensions 100 x 61 x 59 cm - 60 kg

F2M Adapter Set V3 Motion Platform for Aluminium Cockpits

With the F2M-Adapter Motion Platform V3 for aluminium cockpits it is possible to mount the Next Level Racing Motion Platform V3 in an aluminium cockpit e.g. of Trak Racer type 80 and 160. With the 160 cockpit (160mm overall height), the longitudinal profiles of the seat mount are omitted. With the 80 cockpit these are used (to obtain the necessary height / airspace for the V3). With the 160 cockpit the seat position increases by approx. 2 cm compared to the original seat, with the 80 cockpit by approx. 10 cm. For an inside width in the aluminium cockpit of 500mm.

The set consists of two aluminium brackets in black fine structure powder-coated for the V3 with 4 clamping screws. The inside of the bracket is equipped with a sliding strip so that the surface of the aluminium profiles is protected when the V3 is moved longitudinally.

Attention: When installing, make sure that there is sufficient air space for the fans of the V3 (approx. 2 cm distance to the floor and rear wall) and that the seat and, if applicable, a mounted butt-kicker can move freely without bumping into fixed parts or producing a crushing hazard for the hands. If a static shifter mount is used in the seat's movement area, it must be shortened so that the seat can move freely in all directions (this can be supplied by Force2Motion on request - see corresponding article).

Please Note: Cockpit and V3 not included.

DEMO system from showroom: Force2Motion 8DOF - Motion-Simulator - ‘The Beast - NLR-Edition’ (Seat-Mover and Cockpit-Mover)

Attention: This item is our used demo system from the showroom. The system has been used for demos, is in very good condition and comes with a two-year warranty for private use. The system will not be shipped and must be picked up on site with a suitable vehicle (delivery van). For an additional charge, we will deliver the system to you and set it up at your premises.

Why do we sell our demo system? There are two reasons: Firstly, NLR unexpectedly stopped selling the Traction Loss System in February 2024 and our stocks of this system are now exhausted. Secondly, ProSimu has also stopped selling its products via resellers overnight. We will therefore no longer be selling and promoting ProSimu products with immediate effect. It therefore no longer makes sense to keep our beast in this form in the showroom for testing and we are parting with our in-house development with a heavy heart. For you, this means the last chance to get hold of one of these beasts at an absolutely preferential price. We are giving a 50% discount on the last new price and at the same time we are granting a 2-year warranty for the entire system. Support for the Motion systems is also guaranteed by the manufacturer beyond the expiry of the warranty, as there are still many of these systems in use worldwide and the software will continue to be maintained independently of the Beast.

The ultimate combination of seat mover and full motion cockpit with traction loss

Our innovative and exclusive Force2Motion 8DOF cockpit combines the NLR GTTrack cockpit with Motion Platform V3 (seat mover) and the Traction Plus system (for oversteer and understeer effects) from Next Level Racing with the cockpit mover based on the ProSimu T1000 4M. The icing on the cake is a butt kicker that transmits the vibrations from the engine, rev limiter and curb effects tactilely to the seat and thus to the driver's body. This makes the system the ultimate racing and/or flight cockpit with 8 DOF.

Video gallery (excerpt) - you can find more videos in our You Tube channel



The beast: All-In-On for testing in our showroom

Fast Facts:

• Cockpit with 4DOF plus Next Level Racing Motion Platform (seat mover) with 2 DOF and Traction Plus (2 DOF)
• 8 actuators plus butt kicker
• NLR GTTrack cockpit with seat adjustment
• Racing seat (standard ERS3 NLR)
• Seat belts
• Force2Motion adapter system
• All necessary electronics, cables and screws including cables (power supply unit, signal converter USB)
• Plastic housing and steel or aluminium frame
• Very resistant paint (colour powder heated to 200 ° C on the structure)
• Made of square tube, ultra-precise laser cutting, allowing maximum rigidity.
• Compatible with many accessories and devices: Thrustmaster, Fanatec etc. (not included)
• Power supply: Standard Schuko plug 110-240V - power consumption approx. 1,000 watts
• Space requirement (footprint): Length approx. 200 cm x width 120 cm (+ space for entry) x height 170 cm (top edge of seat)
• The recommended rider weight is 80-100 kg (depending on the equipment of the overall cockpit - official payload of the Traction Plus System is 235 kg)
• Supported games: See SimRacingStudio and Platform Manager for details. The software is continuously updated as new games are released. Not every software title is equally well supported by every motion system.

Windows - PC required ! No support for Playstation, Xbox and other consoles! - Software (SimRacingStudio) included!

For details on the Next Level Motion platform, see the corresponding article description

Observe maximum weights: The Next Level Racing Traction Plus System has a permissible payload of 235 kg. The Next Level Racing Motion Platform V3 allows a maximum payload of 130 kg (incl. seat and seat-mounted accessories). Therefore, make sure that you do not exceed either value. The total weight of the cockpit depends on the accessories (controls) you have fitted and the weight of the driver. Depending on the configuration, we recommend that you do not exceed a rider weight of 100 kg.

The bundle contains the following individual items and options - (for details on the respective items, please click on the corresponding product links):

• Next Level Motion Platform V3
• Next Level Traction Plus System
• Force2Motion ProSimu 4 DOF system with Force2Motion adapter (fits directly onto Next Level Racing Traction Plus and GT Track)
• Buttkicker incl. control unit and external USB sound card
• Force2Motion cable management
• Emergency stop plate with 4x emergency stop buttons for individually switching off individual motion systems
• Force2Motion seat frame with central joystick mount and NLR Flight Pack
• Next Level Racing GT Track Cockpit with NLR ERS3 seat and safety harness

Attention: The controllers shown in the pictures (PC, Fanatec Wheelbase, Fanatec Steering Wheel, Fanatec Pedals and Bravo-Quadrant Flight Control incl. Streamdeck are not part of the bundle, but can be purchased separately (ask for offer). Monitors, monitor mounts, PC, keyboard and keyboard stand NOT included.

Force2Motion 8DOF - Motion-Simulator - Built-to-Order "The Beast"

Important note: The product is no longer available in this form due to product discontinuation by the manufacturer. We are working on a replacement...
 
The ultimate combination of Seat-Mover and Full-Motion-Cockpit with Traction Loss

Attention: Do not be put off by the price shown! This bundle contains all possible options and combinations you can choose from. The actual price will be significantly lower after your selection in the shopping cart!
 
Our innovative Force2Motion 8DOF cockpit, exclusively manufactured in this combination, combines the GTTrack cockpit with Motion Platform V3 (Seat Mover) and the Traction Plus system (for oversteer and understeer effects) from Next Level Racing with the Cockpit Mover based on the ProSimu T1000 4M. As the "cream on top", a butt kicker is mounted, which transfers the vibrations from the engine, speed limiter and curb effects tactilely into the seat and thus onto the driver's body.
 
This turns the system into the ultimate racing and/or flying cockpit with 8 DOF. This product idea arose from the idea of putting together a complete cockpit with all conceivable options for our showroom in order to show our customers the respective effects of the individual motion systems on one system. After we had gained sufficient experience with the prototype, we completely redesigned the adapter system for combining the two worlds and had it manufactured in Germany. The adapter system is so modular that it is 100% compatible with the Next Level Racing Traction Plus system and can therefore be installed as an add-on between the GTTrack cockpit and Traction Plus. The adapter system can also be used to mount other cockpits than the GTTrack on the Next Level Racing Traction Plus system. For example, there is already an aluminium plate pre-drilled for RSeat RS1 and S1 cockpits, which can of course also be used for other cockpits and do-it-yourself projects by drilling appropriate holes.
 
Fast Facts:

• Cockpit with 4DOF plus Next Level Racing Motion Platform (Seat-Mover) with 2 DOF and Traction Plus (2 DOF)
• Up to 8 actuators plus Buttkicker
• NLR GTTrack cockpit with seat adjustment
• Racing seat (standard NLR - optional at extra charge ProSimu racing shell rigid)
• Safety belts
• Option: Force2Motion adapter systems (optionally with or without mounting plate for third-party cockpits)

Force2Motion Adapter-System Dynamic for NLR Traction Plus (Add-On) - Size L (980 mm width)

• Force2Motion adapter system Dynamic for mounting of cockpits (third party manufacturers, self-made) on the Next Level Racing Traction Plus system
• This is an expansion set for the static Force2Motion-Adapter to upgrade it to a complete adapter system
• Without actuators and Traction Plus System!

With the static adapter it is possible to mount different cockpits on the Traction Plus System. The adapter is based on the Force2Motion adapter system "The Beast" and can be extended by purchasing the 4 DOF actuator set to get additional 4 DOF and move the whole cockpit.

Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!
 

Force2Motion Seatframe

The F2M seatframe replicates the substructure of the original Next Level GT Track seat or cockpit and extends its function by the possibility of mounting a joystick for a flight cockpit in the centre position in front of the seat (between the pilot's legs). The centrestick can be mounted statically. Depending on how far forward the centrestick is to be positioned, the round mounting plate can be moved forward or back through various drill holes in the range of 0-40mm. The compatibility to the NLR Flightpack is maintained and creates the mounting possibility universally also for other cockpit/seat combinations. A Buttkicker Gamer2 (or similar) can be mounted to the F2M Buttkicker Holder in such a way that it can transfer the effects directly to the seat and move freely in virtually any cockpit (when using the NLR Motion Platform V3) without bumping into fixed cockpit parts.
 
It is essential to ensure that there is sufficient room for the seat to move with the seat frame in the cockpit (do not use in the Fanatec cockpit!).

 

Next Level Racing® F-GT Elite Formula and GT Aluminium Profile Simulator Cockpit iRacing Edition
 
Fast Facts:

1. All in one cockpit with quick adjustments for all driving positions including true formula, GT, Hybrid, Truck, and Tank
2. Free 12 months iRacing® subscription for new users (110 USD Value)
3. Rigid and highly adjustable mounting support included for your seat, wheel, pedals, shifter, handbrake
4. Post anodized custom carbon grey (scratch resistant) aluminium profile with premium carbon steel powder coated components
5. Pedal position height, angle and distance adjustable
6. Pre-machined holes in aluminium profile for rigidity and ease of assembly
7. Compatible and easy installation with Next Level Racing® Motion Platforms
8. All the extra’s included such as NLR seat slider system, seat brackets, height adjustable shock absorption feet, gear shifter & handbrake support plate, foot step, Buttkicker® Gamer 2 adaptor, cable management clips, Motion Platform V3 adaptors, ratchet tool & more
9. Premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
10. T-slot extruded aluminium allows compatibility of accessories with other cockpit brands
11. Fully enclosed base frame for strength and aesthetics
12. Taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
13. Compatible with all major brands of electronics for major brands of wheels, pedals and shifters including Fanatec, Thrustmaster, Logitech, Simxperience and many more

Please note: For direct drive wheel users such as Fanatec® DD/ Simucube®/ Simagic® Next Level Racing recommends the Next Level Racing® F-GT Elite Front and Side Mount edition or the separetly available adaptor for an optimal racing experience.

Next Level Racing® F-GT Elite Formula & GT Aluminium Profile Simulator Cockpit - Wheel Plate Edition

Key Features:

1. All in one cockpit with quick adjustments for all driving positions including true formula, GT, hybrid, truck, and tank
2. Rigid and highly adjustable mounting support included for your seat, wheel, pedals, shifter, handbrake
3. Post anodized custom carbon grey (scratch resistant) aluminium profile with premium carbon steel powder coated components
4. Pedal position height, angle and distance adjustable
5. Pre-machined holes in aluminium profile for rigidity and ease of assembly
6. Compatible and easy installation with Next Level Racing® Motion Platforms
7. All the extra’s included such as NLR seat slider system, seat brackets, height adjustable shock absorption feet, gear shifter & handbrake support plate, foot step, Buttkicker® gamer 2 adaptor, cable management clips, Motion Platform V3 adaptors, ratchet tool & more
8. Premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
9. T-slot extruded aluminium allows compatibility of accessories with other cockpit brands
10. Fully enclosed base frame for strength and aesthetics
11. Taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
12. Compatible with all major brands of electronics for major brands of wheels, pedals and shifters including Fanatec, Thrustmaster, Logitech, Simxperience and many more

Please note: For direct drive wheel users such as Fanatec® DD/ Simucube®/ Simagic® Next Level Racing recommends the Next Level Racing® F-GT Elite Front and Side Mount Edition for an optimal racing experience

Next Level Racing® F-GT Elite Formula & GT Aluminium Profile Simulator Cockpit - Side and Front Mount Edition

Fast Facts:

1. All in one cockpit with quick adjustments for all driving positions including true formula, GT, Hybrid, Truck, and Tank
2. Zero-flex Front & Side Mount with 70 degrees of adjustability for Direct Drive wheelbases
3. Rigid and highly adjustable mounting support included for your seat, wheel, pedals, shifter, handbrake
4. Post anodized custom carbon grey (scratch resistant) aluminium profile with premium carbon steel powder coated components
5. Pedal position height, angle and distance adjustable
6. Pre-machined holes in aluminium profile for rigidity and ease of assembly
7. Compatible and easy installation with Next Level Racing® Motion Platforms
8. All the extra’s included such as NLR seat slider system, seat brackets, height adjustable shock absorption feet, gear shifter & handbrake support plate, foot step, Buttkicker® Gamer 2 adaptor, cable management clips, Motion Platform V3 adaptors, ratchet tool & more
9. Premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
10. T-slot extruded aluminium allows compatibility of accessories with other cockpit brands
11. Fully enclosed base frame for strength and aesthetics
12. Taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
13. Compatible with all major brands of electronics for wheels, pedals and shifters including Fanatec, Simxperience and many more

Please note: For non-direct drive, bottom mounting wheel users such as Fanatec® Clubsport/ Thrustmaster® Next Level Racing® recommends the Next Level Racing® F-GT Elite Wheel Plate Edition Cockpit

Next Level Racing GTTrack Cockpit frame only (without seat)

Pleae note: This article contains only the GTtrack frame without the seat (limited availability)!  If you need a complete cockpit, please order the products "Next Level Racing GTtrack" or "Next Level Racing GTtrack Playstation Version".

The new Next Level Racing GTtrack Cockpit presented at the SimRacingExpo 2018 can be tested in our showroom. An order is already possible. The system is expected to be available from end of November. Pre-orders will be accepted immediately and delivered in order of purchases. First come first serve.

The GTtrack is the ultimate cockpit for serious sim racers looking for rigidity, complete adjustability and a true race car seating position. The GTtrack has been designed with the close feedback of professional drivers and some of the world's fastest eSports drivers to give you every feature required for serious sim racing. The complete rigidity of the GTtrack allows it to support direct drive wheels and professional pedal sets as weil as being compatible with all major wheel and pedals including Thrustmaster®, Logitech® and Fanatec®.
 

Force2Motion RaceRoom 30x Adapter for Next Level Racing Motion Platform V3

What’s Included:

•  
• Force2Motion adapter for installing the Motion Platform in the RaceRoom cockpits (RaceRoom cockpit not included, but optionally available)
• Force2Motion Seat-Adapter 345mm
• Next Level Racing® Platform Manager Software (Download)
• USB cable
• Power cable
• Manual (english)

Please note. Next Level Racing® V3 Motion Platform not inluded. For a better price as a kit please see product Next Level Racing Motion Platform V3 RaceRoom Edition 30x (More Info).
When using the Next Level Racing Motion Platform, we strongly recommend using the RaceRoom Stiffener Kits and the RaceRoom Seat Adjustment.

The kit is compatible with the RaceRoom RR3055 and RR3033 (for the cockpits  RR4055 and RR4027 see separate article). However, RaceRoom's 5.1 sound system cannot be used without modification, as the installation space for the subwoofer under the seat is used for the motion platform! The subwoofer must be placed manually outside the cockpit!

Force2Motion 4 DOF ProSimu Kit 100mm with F2M adapter system for NLR Traction Plus - Size X (1060mm width)

• ProSimu actuator set with 4x 100 mm stroke and control unit and Simtools software
• Force2Motion adapter system ("The Beast") to copy the ProSimu actuators with the Fanatec Clupsport V2 Cockpit (or similar) and Traction Plus system
• F2M Baseplate X for Fanatec Cockpit (Fanatec Cickpit not included)

Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!
Observe maximum weights: The Next Level Racing Traction Plus System has a maximum payload of 235 kg. The Next Level Racing Motion Platform V3 allows a max. payload of 130 kg (incl. seat and seat-mounted accessories). Therefore, make sure that you do not exceed both values. The total weight of the cockpit depends on the accessories (controls) you have mounted and the driver's weight. Depending on the configuration, we recommend not exceeding the driver's face of 100 kg.
 

Force2Motion GTTrack Pedallifter

After installing the Next Level Motion Platform V3 in the GTTrack cockpit, the pedal plate may be too low in relation to the seat height for some people. We have the solution for this: With the Force2Motion GTTrack Pedallifter the pedal plate is raised by 80mm. This completely compensates for the higher seat position. The pedal lifter is made of solid aluminium and is powder coated in matt black. Plastic end caps provide a clean look. Longer screws are included.
 

R2R-Addon emergency stop switch for Sim-platforms 2x power cold devices plus emergency stop ProSimu (if included) incl. mounting bracket

With the mushroom head slater you can mount the power supply of the Motion Platform comfortably and easily accessible on the cockpit. The emergency stop switch can be switched on and off during the running simulation and the Motion Platform switches on and off during the running game.

Attention: We offer this article, which is individually assembled, only in connection with cockpits, motion platforms and racing simulators purchased from us. No sale to customers who have not purchased simulators from us.

What's included:

• F2M adapter bracket in black satin powder-coated with screws for mounting on the cockpit.
• 3x emergency stop switch wired with safety plug and 3x power cable (for terminal devices)
• Mount option for ProSimu emergency stop switch (included with ProsSimu system)
• Manual

Assembly: The assembly is done by the customer himself. Since the switch is a current-carrying component (220V), the opening and assembly may only be carried out by trained personnel (electricians or similar). We accept no liability for damage caused by disregarding these instructions!

Force2Motion seat adapter 345mm for Next Level Motion Platform V3 - For mounting race seats on the Next Level Racing Motion Platform V3

Suitable for common racing seats with 345mm hole spacing sideways and 270mm, 273mm and 320mm longitudinal spacing (e.g., Sparco R100, Sparco Pro 2000 Floormount, OMP, RaceRoom, etc.). The seat adapter is mounted between seat or seat rail (for longitudinal adjustment) and Next Level Racing Motion Platform V3 and converts to the lateral hole spacing of 355 mm of the Motion Platform. The adjustment of the seat adjustment thus remains fully intact. By the way: The seat adapter is already included in the Next Level Motion V3 RaceRoom Edition bundle!

Dimensions: 40mm x 30mm x 4mm x 340mm aluminum black powder coated; incl. 4 pcs. M8 countersunk head screws including stop nuts and assembly instructions.

Supplied without seat and seat adjustment slider!

RSeat S1 - Adapter Kit for Next Level Racing Motion Platform V3

Force2Motion adapter set for the installation of the Motion Platform in the RSeat S1 cockpit incl. lifter for wheel and pedal plate as well as for a shifter extension; With the Force2Motion adapters not only the Next Level Motion Platform is inserted into the S1 cockpit, but also the geometry of the seating position is adapted to the 8-10 cm higher seat surface. For this purpose, both the wheel mount and the shifter mount (analog flight mount) are raised by about 8-10 cm. The pedal plate is lifted by 4 cm. This virtually eliminates the higher seat height due to the Motion Platform mounted between the RSeat chassis and seat. The add-on parts are black anodized and of high quality. This means that neither the appearance nor the stability of the cockpit suffers, but the seat moves!

Scope of delivery

• Force2Motion adapter set for the installation of the Motion Platform in the RSeat S1 cockpit incl. shifter extension plate, lifter for wheel and pedal plate (RSeat S1 cockpit and NLR Motion Platform NOT included);

Force2Motion RSeat N1 Adapter for Next Level Racing Motion Platform V3

What’s Included

• Force2Motion adapter for installing the Motion Platform in the RSeat N1 cockpit (RSeat Cockpit and Motion Platform not included)
• Manual (GERMAN)
• Attention: Due to the approx. 8cm higher seating position, the optionally available RSeat Keyboard stand can not be used without restrictions (legroom or height is not sufficient)

Force2Motion Adapterset for Next Level Racing Motion Platform V3 in Fanatec Cockpit

What’s Included

• Force2Motion adapter for installing the Motion Platform in the Fanatec cockpit (Fanatec Cockpit and Next Level Racing® V3 Motion Platform not included)
• Force2Motion adapter for mounting Fanatec handbrake on Fanatec shifter when using Motion Platform (handbrake, shifter and Fanatec Clamp not included)
• Manual (German)

Fanatec Cockpit and Next Level Racing® V3 Motion Platform not included!

R2R-Addon Force2Motion Buttkicker

• External butlicker with control unit from the brand manufacturer
• incl. external sound card USB

Attention: This is an article which is only sold in connection with Ready-To-Race-Bundles. No single delivery!

Force2Motion Fanatec Pedal Lifter
With the Force2Motion Fanatec Pedal-Lifter the pedal plate of the original Fanatec Cockpit V2 can be raised by 6 cm to compensate the slightly raised seating position when using the Next Level Racing Motion Platform (Force2Motion Edition) and to achieve a more reclined driver position. The longitudinal adjustability of the pedals remains fully intact.

Scope of delivery:
2 pieces 280 mm long aluminium profiles black powder-coated with 4 correspondingly long toggle screws M6 for exchange against original toggle screws.

Cockpit, Next Level Racing Motion Platform Force2Motion Edition etc. not included!

Next Level Racing Motion Platform V3 - WEEE-Reg.-Nr. DE 11344112

Attention: for options and accessories also see the alternative article "Next Level Racing Motion Platform V3 - KIT"!

• Next Level Racing® V3 Motion Platform
• Next Level Racing® Platform Manager Software (Download)
• USB cable
• Power cable
• Steel side panels to directly bolt on to your Next Level Racing® GTultimate Cockpit, Next Level Flight Simulator or retrofit to your existing cockpit
• Manual (english)

Next Level Racing® F-GT Elite Formula & GT Aluminium Profile Simulator Cockpit - Side and Front Mount Edition

Fast Facts:

1. All in one cockpit with quick adjustments for all driving positions including true formula, GT, Hybrid, Truck, and Tank
2. Zero-flex Front & Side Mount with 70 degrees of adjustability for Direct Drive wheelbases
3. Rigid and highly adjustable mounting support included for your seat, wheel, pedals, shifter, handbrake
4. Post anodized custom carbon grey (scratch resistant) aluminium profile with premium carbon steel powder coated components
5. Pedal position height, angle and distance adjustable
6. Pre-machined holes in aluminium profile for rigidity and ease of assembly
7. Compatible and easy installation with Next Level Racing® Motion Platforms
8. All the extra’s included such as NLR seat slider system, seat brackets, height adjustable shock absorption feet, gear shifter & handbrake support plate, foot step, Buttkicker® Gamer 2 adaptor, cable management clips, Motion Platform V3 adaptors, ratchet tool & more
9. Premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
10. T-slot extruded aluminium allows compatibility of accessories with other cockpit brands
11. Fully enclosed base frame for strength and aesthetics
12. Taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
13. Compatible with all major brands of electronics for wheels, pedals and shifters including Fanatec, Simxperience and many more

Please note: For non-direct drive, bottom mounting wheel users such as Fanatec® Clubsport/ Thrustmaster® Next Level Racing® recommends the Next Level Racing® F-GT Elite Wheel Plate Edition Cockpit

Next Level Racing® F-GT Elite Formula & GT Aluminium Profile Simulator Cockpit - Wheel Plate Edition

Key Features:

1. All in one cockpit with quick adjustments for all driving positions including true formula, GT, hybrid, truck, and tank
2. Rigid and highly adjustable mounting support included for your seat, wheel, pedals, shifter, handbrake
3. Post anodized custom carbon grey (scratch resistant) aluminium profile with premium carbon steel powder coated components
4. Pedal position height, angle and distance adjustable
5. Pre-machined holes in aluminium profile for rigidity and ease of assembly
6. Compatible and easy installation with Next Level Racing® Motion Platforms
7. All the extra’s included such as NLR seat slider system, seat brackets, height adjustable shock absorption feet, gear shifter & handbrake support plate, foot step, Buttkicker® gamer 2 adaptor, cable management clips, Motion Platform V3 adaptors, ratchet tool & more
8. Premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
9. T-slot extruded aluminium allows compatibility of accessories with other cockpit brands
10. Fully enclosed base frame for strength and aesthetics
11. Taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
12. Compatible with all major brands of electronics for major brands of wheels, pedals and shifters including Fanatec, Thrustmaster, Logitech, Simxperience and many more

Please note: For direct drive wheel users such as Fanatec® DD/ Simucube®/ Simagic® Next Level Racing recommends the Next Level Racing® F-GT Elite Front and Side Mount Edition for an optimal racing experience

Next Level Racing® F-GT Elite Formula and GT Aluminium Profile Simulator Cockpit iRacing Edition
 
Fast Facts:

1. All in one cockpit with quick adjustments for all driving positions including true formula, GT, Hybrid, Truck, and Tank
2. Free 12 months iRacing® subscription for new users (110 USD Value)
3. Rigid and highly adjustable mounting support included for your seat, wheel, pedals, shifter, handbrake
4. Post anodized custom carbon grey (scratch resistant) aluminium profile with premium carbon steel powder coated components
5. Pedal position height, angle and distance adjustable
6. Pre-machined holes in aluminium profile for rigidity and ease of assembly
7. Compatible and easy installation with Next Level Racing® Motion Platforms
8. All the extra’s included such as NLR seat slider system, seat brackets, height adjustable shock absorption feet, gear shifter & handbrake support plate, foot step, Buttkicker® Gamer 2 adaptor, cable management clips, Motion Platform V3 adaptors, ratchet tool & more
9. Premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
10. T-slot extruded aluminium allows compatibility of accessories with other cockpit brands
11. Fully enclosed base frame for strength and aesthetics
12. Taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
13. Compatible with all major brands of electronics for major brands of wheels, pedals and shifters including Fanatec, Thrustmaster, Logitech, Simxperience and many more

Please note: For direct drive wheel users such as Fanatec® DD/ Simucube®/ Simagic® Next Level Racing recommends the Next Level Racing® F-GT Elite Front and Side Mount edition or the separetly available adaptor for an optimal racing experience.

Next Level Racing Motion Plus Platform (Cockpit-Mover)

Note: We have developed an adapter system to run two Motion Plus platforms plus a V3 on a Traction Plus system. Further information: https://www.force2motion.de/en/motion-the-beast/force2motion-adapter-system-motion-platform-plus/

All good things come in threes: With the new Motion Plus Platform, Next Level Racing is expanding the Motion Eco System of the Motion Platform V3 and the Traction Plus System with a third component. Now it is also possible with the Next Level Racing systems not only to tilt the seat (Seat Mover) or to move the cockpit sideways to simulate oversteer and understeer (Cockpit Slider or Mover), but also to raise the entire cockpit. In contrast to other concepts (such as our Beast), the lifting is not realised by individual actuators (such as those of ProSimu or the Qubic system) but by one or two integrated modules that are mounted under the cockpit. The Next Level Racing cockpits GTTrack, GT- or FGT-Elite and even the FGT cockpit are supported as standard (with adapters if necessary), which until now had to remain completely outside the scope of the motion upgrade. But we will also support cockpits from other manufacturers in the future.

Leading Features:

• Full Cockpit Mover, simulating vehicle chassis motion with ultimate precision and accuracy
• Market leading technology to feel bumps, corners, rolls, gear shifts and vibrations for peak immersion
• Quick and simple installation, compatible with the Next Level Racing cockpits
• Commercially bulit, but perfect for home use with its compact design and low noise opertaion
• Compatible with all major racing and flight games for PC (Windows)
• 1 Module for 2-DOF and **2 modules for 3-DOF
• Adaotbale to the existing Next Level Racing Motion Ecosystem to continue taking racing to the next level
• Unique pivot bar included for single unit use setups
• Advanced VR Compensation Software to experience smooth prcise VR movement
• Ultra-low latency provides sharp and accurate movement throughout the chassis

Force2Motion Motion Platform Plus Adapter System - Base Support (bottom)

With the F2M adapter system Motion Platform Plus it is possible to mount one or two Motion Platform Plus on the Traction Plus. Depending on the rider's weight (75-100 kg) and the mounted cockpit, an additional V3 can then be inserted into the cockpit.
 
The system consists of a lower (mandatory) and upper (optional) carrier system. Depending on the cockpit used, the upper carrier may or may not be required. The lower carrier is called the basic set and contains the floor plates 150mm and two cross members with bracing plates for Traction-Plus mounting. These parts are not or only partially needed for the upper beam (extension set), as the Motion-Plus platforms are located at this point. The upper support can also be used on its own to extend the Wheel Stands DD and 2.0 with one or two Motion-Plus platforms and a V3 to a Motion Cockpit.

The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.

The basic carrier (below) is required for the following cockpits and motion platforms:

• NLR GT Elite Cockpit on Traction Plus (with Next Level Racing® GTElite Motion Adaptor Upgrade Kit).
• NLR FGT Elite Cockpit on Traction Plus
• NLR GTTrack Cockpit on Traction Plus
• NLR GTTrack Wheel Stand on Traction Plus (extension bracket required)
• NLR Wheel Stand DD on Traction Plus (extension carrier required)
• NLR Wheel Stand 2.0 on Traction Plus (extension carrier required)
• NLR FGT Cockpit on Traction Plus (extension carrier required)
• NLR FGT Cockpit on Traction Plus (only extension carrier required - you do need the base support (bootom) for this!)
• Custom-built cockpits and third-party cockpits with Motion Plus on Traction Plus (Please enquire and seek advice individually!).

Force2Motion Adapter System Motion Platform Plus - Additional Bracing Rocker Top FGT

When mounting only one Motion Platform Plus in combination with the NLR FGT cockpit, an additional stiffening profile is required for height compensation.

The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.

Scope of delivery:

• Crossbar 80x40 for rocker Powder coating black fine structure
• 4x angle pieces for fastening Powder coating black fine structure
• 2x plugs 80x40
• Slot nuts, screws, nuts and washers
• Instructions in German (English in preparation)

Dimensions: approx. 80mm x 560mm x 120mm
Net weight: approx. 3,5 kg

The profile is only available in black powder coated.

 

Next Level Racing HF 8 Haptic Feedback Gaming Pad

Main Features

• See it, play it, feel it with advanced haptic perception at an affordable price
• Eight individual vibration motors for the ultimate haptic experience
• Enhanced gaming experience on PC via Next Level Racing® HFS plug-and-play software using telemetry data
• Suitable for game consoles with 3.5mm audio jack (headset/speakers required for Playstation users)
• Universal design for all types of seats, including gaming, sim racing and flight seats
• Enhanced haptic experience for gaming, as well as VR, videos and music
• Designed for sim racing, flight sims and first-person shooters

About

Go Beyond the sounds in gaming, music, and movies - Introducing the Next Level Racing HF8- Haptic Feedback Gaming Pad. Feel the immersive haptic experience with the eight strategically placed vibration zones that are powerful and localized for precision. The Next Level Racing® HF8 is optimized for different simulation games* for a unique in-game experience. The HF8 suits all gaming chair, racing/flight seat styles, and bodies comfortably for the best user experience. The HF8 includes plug-and-play PC software to provide you a multi-channel experience without the need of additional sound cards or amplifiers.

*Localization and intensity of each motor can only be adjusted through PC use and HFS software. Console players do not require the HFS software as the eight motors will work collectively through the audio output.
 
Product Video see: https://youtu.be/J9PVxBIjRfw
 

Motion-Systems Qubic System - QS-H13 - Challenger - Seat-Mover

About QS-H13 - Challenger

QS-H13 Challenger sets a new benchmark in the world of motion systems for those seeking a compact and ultra-quiet solution for their driving or flight simulator. The Qubic System seat mover – QS-H13, built using the same advanced technology as the QS-220 actuators, outperforms and challenges all currently available seat mover solutions.
By delivering smooth and precise motion across two axes (pitch/roll), it accurately simulates the forces experienced during braking, cornering in a car, or executing sharp maneuvers in an aircraft.

According to the manufacturer, the first deliveries are scheduled for Q2/2025.

Compact Design that fits anywhere

Qubic System seat mover, designed for individuals with limited space for a simulator who still want to elevate their immersion experience without cluttering their environment.
Built with industrial-grade components and exceptional structural rigidity, ensuring the platform remains stable and delivers a seamless connection with the vehicle, allowing users to feel details such as suspension behavior with precision.
Easy to install, requiring no special manual skills or technical knowledge.
It is compatible with most aluminum cockpits without the need for additional brackets or drilling holes.
Operates on 115/230V, eliminating the need for voltage converters. Simply plug it in and play. Additionally, it features low power consumption compared to other systems on the market.
 
Vibrations and haptics reserved for high-end products

Say goodbye to external devices like bass shakers or other vibration generators for effects such as engine feedback. With this device, you get integrated functionality delivering a wide range of low- and high-frequency vibrations. This enhances your ability to feel diverse effects, improving your connection with the vehicle and helping you become a better driver or pilot.
These features are typically found only in high-end products, setting this device apart from lower-cost alternatives that lack vibration effects. It highlights the superior quality of the product.

Responsiveness precision without delay

One of the greatest challenges in the world of simulation is ensuring that a device can keep up with telemetry signals and accurately reflect the input without unnecessary delays.
The QS-H13 seat mover has been fully engineered, both in hardware and software, to eliminate perceptible latency while driving. This advantage becomes even more apparent when using VR headsets, as the system integrates seamlessly with Qubic Manager’s built-in motion compensation. This feature requires no additional setup—simply plug and play.

Quietness and smoothness silent operation

Utilizes the same technology as the QS-220, ensuring ultra-quiet operation by eliminating the use of gearboxes or DC motors commonly found in other similar solutions on the market.
Thanks to its silent operation, the simulator can be used freely in residential spaces and during late hours without disturbing other household members or neighbours.
Delivers precise motion to accurately replicate telemetry signals received from the simulaton engine, enhancing vehicle control awareness and enabling quicker reactions, such as during a loss of traction.

QS-H13 Compatibility - designed for aluminium cockpits

The 2DOF Challenger is built to fit perfectly with most aluminum cockpits and cockpits from other popular brands. Its design makes it easy to install and compatible with a wide range of setups, whether they are standard or custom-made.
It also works flawlessly with other devices from the Qubic System family, like the QS-210, QS-220, QS-CH2, and QS-BT1. This makes it simple to expand your setup and ensures all components work well together for the best simulation experience.
 
What benefits are there for existing owners?

QS-BT1 BELT TENSIONER:

• Pronounced acceleration effect
• Body roll and pitch related motion
• Diversification between effects you feel on your shoulders vs on your butt
• Since the brake effect is handled by QS-BT1, there is less travel needed toward the steering wheel which helps with muscle memory
• Plug and play installation as QS-H13 is fully prepared to have QS-BT1 attached to the top frame

QS-210/QS-220 ACTUATOR SET:

• More pronounced acceleration and braking motion
• Ability to allocate vehicle body rotation to QS-210/220 and acceleration related motion to QS-H13 for better motion isolation
• Option to have engine vibrations and road harshness closer to your body
• Less overlapping motions which allows for better work envelope utilization

No motion - No QS-BT1:

• More pronounced acceleration and braking motion
• Ability to allocate vehicle body rotation to QS-210/220 and acceleration related motion to QS-H13 for better motion isolation
• Option to have engine vibrations and road harshness closer to your body
• Less overlapping motions which allows for better work envelope utilization

Device manufacturer by competitors:

• Brand new modern 2025 design
• Shares genes with QS-210/220 and uses the same breathtaking technology
• Great introduction to the Qubic ecosystem
• Easy to use software with short learning curve

Deeply positioned pivot point true G-Force dynamics

Features a deeply positioned pivot point, located very close to the user’s seat, enhancing the realism of G-forces during operation. This design closely mimics the dynamics of a real vehicle, improving immersion and delivering a heightened sense of “being in the vehicle”. Users can fully experience the subtle shifts and forces during acceleration, braking, and cornering for a truly authentic simulation experience.

In-House Software: Even most advanced hardware is nothing without good software

Qubic Manager is a in-house professional and specialized software for motion platforms. It is plug-and-play compatible with all major racing and flight titles on PC and is continually updated to support new titles as they are released. The Qubic Manager is a powerful engine, yet it’s simple to use, allowing you to easily adjust levels of motion, bumps, roll, and pitch with a click of a button.

VR READY- Virtual Reality with motion compansation

Our software is ready to embrace virtual reality. This means that users can enjoy a complete and authentic simulation experience without integration hassles, thanks to perfect compatibility with VR technology. With Qubic System’s VR Ready software, simulations become more immersive than ever.

Force2Motion Adapter-System Motion Platform Plus - Additional Floor Plate Set Top

If the NLR-FGT-Cockpit (not FGT-ELITE) is used, an additional floor plate with stiffening profile is required. If only one Motion-Plus-Platform is used with the FGT-Cockpit, an 80x40 height compensation profile is required (see separate article).

The complete description of the product incl. all possible combinations and the restrictions regarding the weight when using a Traction Plus System can be found in the following PDF.

Force2Motion adapter system Motion Platform Plus - extension carrier (top)

The upper frame (F2M adapter system Motion Platform Plus extension carrier) is used to accommodate the Wheel Stands of the NLR GTTrack Cockpit or the NLR Wheel Stand DD or the NLR Wheel Stand 2.0 and, together with a V3, to form the cockpit, which can then be equipped with one or two Motion Platform Plus. If this construct is to be mounted on a Traction Plus, you will also need the F2M base support.

And the upper frame can also (alone - without the lower carrier) "transport" the NLR FGT cockpit (with and without NLR seat) to a Motion Cockpit. Here you can integrate one or two Motion Platform Plus and operate the whole thing "solo" with the original floor supports from NLR. And you can even strap the system onto a Traction Plus system. Pretty crazy, but it works.

The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.

The extension carrier (top) is needed for the following cockpits and motion platforms:

•  NLR GTTrack Wheel Stand on Traction Plus (base adapter required)
•  NLR Wheel Stand DD on Traction Plus (base adapter required)
•  NLR Wheel Stand DD without Traction Plus
•  NLR Wheel Stand 2.0 on Traction Plus (basic adapter required)
•  NLR Wheel Stand 2.0 without Traction Plus
•  NLR FGT Cockpit on Traction Plus (base adapter required)
•  NLR FGT Cockpit without Traction Plus

Force2Motion Motion Platform Plus adapter system - Motion Plus extension base support

With the basic carrier Motion Plus extension, the F2M adapter system Motion Platform Plus can be extended so that a second Motion Platform Plus can be used and mounted on the Traction Plus. Depending on the rider's weight (75-100 kg) and the mounted cockpit, an additional V3 can then be inserted into the cockpit.
 
The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.

Scope of delivery:

• 1x Motion Plus cross member (for mounting a second Motion Plus platform) according to the selected colour or coating.
• 2x corner plates powder coating black fine structure
• Slot nuts, screws, nuts and washers
• Instructions in German (English in preparation)

Dimensions: approx. 105mm x 575mm x 60mm

Net weight: approx. 1,4 kg

Delivery times:
 
Delivery time for stock items (inventory items) is usually 2-5 days from receipt of order and payment. Combinations that are not in stock or are explicitly made due to a special colour request usually require 4-6 weeks delivery time.