ProSimu T7 PRO Racing Motion Simulator
Video of our Test at Prosimu in France
About:
The T7 PRO™ simulator was designed and manufactured in France in order to meet the requirements of professional pilots for their training. The T7 PRO™ motion Simulator has 6 completely innovative degrees of freedom (6 DOF): it also simulates oversteer and understeer (rear and front traction loss) to meet the demands of pilots: to be as close to real driving. The T7 PRO™ has been designed for automotive simulation and airplane simulation; it can also be used for truck simulation, training or leisure centers (more than 100 compatible games) as well as for research and development.
In car simulation, speed and acceleration are needed to give you impact when braking and accelerating. With 280mm / s and 2G of acceleration, our simulator will give you topt sensations on the market. With 44 movements / seconds, our PRS200 ProSimu actuators allow you to feel the effects of the road and the vibrations in a very striking and realistic way. The 44 movements / second are only possible by using our high-end servo-drives fitted to the PRS 200 actuators with a high speed CanBus communication 10Mbit / s ISO 11898. The low platform height (43 cm) will allow you to have your center of gravity lower and to feel your vehicle even better.
Our simulator therefore allows you to feel the loss of traction at the rear and the front (oversteer and understeer). After three years of research and development, the patented ProSimu T7 PRO™ is the 6 degrees of freedom (6DOF) simulator with unique technology: simulation of oversteer and understeer, with the sole objective of being as close as possible to real driving.
The T7 PRO™ is the new benchmark among 6 DOF dynamic simulators thanks to the 2 additional effects of oversteer and understeer and its ProSimu PRS 200 actuators having been specially created for automotive and aeronautical simulation.
Whether you are a professional pilot, Gentlemen Driver, Sim-racer or just an enthusiast, the T7 PRO™ is the simulator for you!
Fast Facts:
- 6 DOF : Heave/Surge/Sway/Yaw/Roll/Pitch
- Effects : oversteer and understeer simulation
- 44 movements / second (no latency)
- Max speed: 280mm / s
- Maximum acceleration: 2G
- Minimum platform height: 43cm
- Travel actuators available: 100mm / 150mm / 200mm
Compatible games:
Link to compatible
games (SimTools Software)
What's included:
- T7Pro™ chassis
- 7 x PRS200 ™actuators available in 100/150 / 200mm travel
- 2x Management boxes
- Management software license
- Bucket seat or without seat (compulsory choice)
- With or without seat, SimuCube, steering wheel, pedals, triple screens support and monitors, keyboard and shifter support => choice required before buying (optional)
Windows - PC required ! No support for Playstation, Xbox and other consoles! Software (Simtools) is included!
Attention: This is not a toy and not a ready assembled product! The offered article is a DIY-kit for a motion cockpit. For the assembly manual skill and tools (among other things ratchet set, hexagon socket wrench, fork wrench set and socket wrench 22 or 24mm) are necessary. Actuators from the industrial control system are not designed for home use are. The electrical components may only be assembled and connected by suitably qualified personnel.
It is strongly recommended that the assembly (including delivery) is carried out by ProSimu specialists. The set-up is not trivial and requires specialised knowledge. The Prosimu crew will set up the simulator completely on site and optimise the settings. Please ask for a quote (depending on the installation location and local conditions).
Operation is at the user's own risk. Make sure that no small children or pets can get near the moving parts!
The set is explicitly ordered and preconfigured for you from the manufacturer. Therefore we cannot grant you any right of withdrawl for this article. Please let us advise you before the purchase!
.jpg "Preview: Motion-Systems Qubic System - QS-CH2")
