Qubic - F2M-Addons

Force2Motion adapter for Qubic BT1 Belt-Tensioner to NLR Motion Platform V3

 

In combination with the BT1V3 adapter developed by us, the Seat Belt Tensioner can be mounted on a Next Level Racing V3 as well as on practically any other seat console. The function of a seat slider for longitudinal adjustment of the seat is fully retained.

Watch the video (sorry German version only)

Scope of delivery:

• 1x Force2Motion adapter for Qubic BT1 Belt-Tensioner
• Screw set

Motion platform, belt tensioner, seat slider etc. NOT included.
Attention: Does not fit the Qubic CH1!

Force2Motion Bundle Qubic Systems BT1

The bundle contains:

• Motion-Systems Qubic System - Belt Tensioner BT1
• Motion-Systems Qubic System - Motion Lock für Seat Belt Tensioner
• Sicherheitsgurt 6-Punkt schwarz
• Force2Motion Adapter für Qubic BT1 Belt-Tensioner an NLR Motion Platform V3 Motion Platform V3, Force2Motion Seatframe oder andere Sitzkonsolen

Price advantage when ordering all four items without modification in the basket!

Motion-Systems Qubic System - CH2-210.3DOF.BT1 Ready2Race-Bundle

What is included in the package:

• CH2 Platform
• 4x QS-210 - linear actuator with cup holder
• 2x QS-SB2 - power cabinet (control module)
• 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
• 3x Power cable - 1 pcs of 1,8m long cable for EU market
• 4x QS brackets (set of 2) for mounting on aluminium profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge) 
• QS-MC6 motion controller set - single unit required to control up to 4 sets of QS (not included - see separate product)
• BT1 Seat-Belt-Tensioner with accessories

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Motion-Systems Qubic System - CH2-220.3DOF.BT1 Ready2Race-Bundle

What is included in the package:

• CH2 Platform
• 4x QS-220 - linear actuator with cup holder
• 2x QS-SB2 - power cabinet (control module)
• 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
• 3x Power cable - 1 pcs of 1,8m long cable for EU market / or 1 pcs of 2m long cable for USA market
• 4x QS brackets (set of 2) for mounting on aluminium profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge) 
• QS-MC6 motion controller set - single unit required to control up to 4 sets of QS (not included - see separate product)
• BT1 Seat-Belt-Tensioner with accessories

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Motion-Systems Qubic System - CH2.220.3DOF.BT1.FGT.SET Ready2Race-Bundle

What is included in the package:

• CH2 Platform
• 4x QS-220 - linear actuator with cup holder
• 2x QS-SB2 - power cabinet (control module)
• 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
• 3x Power cable - 1 pcs of 1,8m long cable for EU market
• 4x QS brackets (set of 2) for mounting on aluminum profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge) 
• QS-MC6 motion controller set - single unit required to control up to 4 sets of QS (not included - see separate product)
• BT1 Seat-Belt-Tensioner with accessories
• Force2Motion Adapter for Qubic BT1 Belt-Tensioner
• F2M-Adaptersystem FGT-Elite-Qubic
• Next Level Racing FGT 160 - Wheel Plate Edition

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Motion-Systems Qubic System - CH2.210.3DOF.BT1.FGT.SET Ready2Race-Bundle

What is included in the package:

• CH2 Platform
• 4x QS-210 - linear actuator with cup holder
• 2x QS-SB2 - power cabinet (control module)
• 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
• 3x Power cable - 1 pcs of 1,8m long cable for EU market
• 4x QS brackets (set of 2) for mounting on aluminum profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge) 
• QS-MC6 motion controller set - single unit required to control up to 4 sets of QS (not included - see separate product)
• BT1 Seat-Belt-Tensioner with accessories
• Force2Motion Adapter for Qubic BT1 Belt-Tensioner
• F2M-Adaptersystem FGT-Elite-Qubic
• Next Level Racing FGT 160 - Wheel Plate Edition

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

F2M adapter system FGT-Elite-Qubic

With the F2M adapter system FGT-Elite-Qubic it is possible to mount the Qubic actuator system QS210 or QS220 on the Next Level Racing FGT Elite cockpit

The F2M base plate is mounted under the Next Level Racing FGT Elite cockpit and closes off the cockpit at the bottom. The control units for the Qubic QS210/QS220 can be mounted on the underside of the plate using pre-drilled holes.

With the extended actuator brackets also included, the actuators can be mounted on the cockpit offset by 40 mm so that they do not collide with the pedal plate of the FGT-Elite/FGT 160.

Attention: When mounting the system on a Qubic CH2, the Qubic CH2 cockpit adapter set is also required (see https://www.force2motion.de/de/cockpit-adapter-set-qubic-ch2.html)

The plate consists of a 5 mm thick folded aluminum sheet, powder-coated in black fine structure, with corresponding holes for attachment to the aluminum profiles of the cockpit. The set is supplied with screws and I-profile M8 slot nuts. The actuator brackets consist of black powder-coated brackets with corresponding holes, e.g. for the FGT-Elite cockpit (80/100 and 160 aluminum profiles).

Scope of delivery:

• Base plate black powder-coated 5 mm drilled for NLR FGT Elite
• T-nuts
• screws
• 4x double sets of actuator brackets for wider actuator mounting - A double set consists of two identical / mirrored brackets.
•  Any controllers and accessories shown are NOT included!

F2M Adapter System FGT-Elite-Qubic – Base Plate

The F2M Adapter System FGT-Elite-Qubic allows the Qubic actuator system QS210 or QS220 to be mounted on the Next Level Racing FGT Elite cockpit.

Please refer to the relevant product description for the complete system. This item contains only the base plate with the necessary screws and slotted nuts

 

 

F2M Adapter System FGT-Elite-Qubic – Bracket Set 4x2

The F2M Adapter System FGT-Elite-Qubic allows the Qubic actuator system QS210 or QS220 to be mounted on the Next Level Racing FGT Elite cockpit.

 

The F2M base plate is also available separately as an option; this not only provides the aluminium cockpit with a sturdy base but also allows the Qubic actuator control units to be mounted from below. This plate is not included in this set (see separate item!

 

 

The F2M-Qubic Actuator Adapter System FGT is designed for mounting Qubic 210/220 actuators on cockpits such as the Next Level Racing FGT and FGT160 series or similar aluminium square-profile cockpits.

Here, there are still attachments on the outer side of the longitudinal beams (such as the struts for the pedal plates, which protrude sideways beyond the longitudinal profiles). This means that the standard Qubic actuator brackets cannot be fitted at this point. The F2M-Qubic Actuator Adapter System FGT consists of 8 identical brackets (2 per actuator), with the actuator mounted 40 mm offset outwards. This creates the necessary space to ensure the actuators do not collide with the protruding mounting parts.

 

 

The brackets have various mounting holes (some of which are slotted) to compensate for manufacturing tolerances and to allow them to be fixed at different heights or to aluminium longitudinal profiles of varying heights (80 to 160 mm with 2 to 4 slotted rails). Both the QS210 and QS220 actuators can be used (no mixed configuration!).

When mounting the entire cockpit on a Qubic CH2, ensure that the longitudinal distance between the front and rear actuators is 1114 mm, as specified in the Qubic manual. This is achieved by adjusting the adapter brackets via the slotted holes.

The F2M base plate is also available separately as an option; this not only provides the aluminium cockpit with a sturdy floor but also allows the Qubic actuator control units to be mounted underneath. This plate is not included in this set (see separate item)!

 

 

The entire system is compatible with the Qubic CH2.

 

Note:

 

The Qubic Adapter Set for Wider Cockpits is required to mount the wider cockpits onto a CH2. This is included with the CH2 for units shipped from May 2025 onwards. For units purchased prior to this date, the set must be purchased separately.

 

 

 

 

 

F2M Led Stripe 5M warm white RGB

Smart LED strip RGBIC with warm white, 6300 LEDs strip 2250lm Compatible with Alexa, Google Assistant and Matter, cuttable light chain with music sync; controllable with app

e.g. for mounting on a Qubic System CH2 or comparable cockpit

Scope of delivery:

•  LED strip 5M with power supply unit and switch