Specials

Ready2Fly Bundle NLR FGT Elite mit Qubic QS220

What is included in the package:

• 1x H.NLR.E025 Next Level Racing F-GT Elite 160 Wheel Plate Edition - BLACK
• 1x H.NLR.S030 Next Level Racing Flight Simulator Seat
• 1x H.NLR.E049 Next Level Racing Elite Series Flight Pack
• 1x H.NLR.E036 Next Level Racing Elite Free Standing Triple Monitor Stand - Black Edition
• 2x H.MOS.QS.220.2DOF Motion-Systems Qubic System - QS-220-2DOF Motion System - Set with 2 Actuators and 1 Power Cabinet
• 4x QS-Brackets (2er Sets) - For mounting on aluminium profile cockpits (note: for mounting an FGT cockpit or similar, please also use the specially widened F2M brackets as an option at extra cost.
• 1x H.MOS.QS.BT1 Motion-Systems Qubic System - Belt Tensioner BT1
• 1x H.F2M.SB6PBK Safety-Belt6-Punkt - Schwarz
• 1x H.MOS.QS.BT1.ML Motion-Systems Qubic System - Motion Lock for Seat Belt Tensioner
• 1x H.MOS.QS.MC6 Motion-Systems Qubic System - QS-MC6 – Motion Controller - A single device is required to control up to 4 QS systems.

Please note: Special price as a package! If you remove individual mandatory components of the package from your shopping basket, you may lose the price advantage. Therefore, please pay close attention to the prices in your shopping basket. 

Bundle NLR FGT Elite Wheel Plate Edition plus Next Level Racing ERS2 Reclining Seat

Bundle consists of the following items:

Next Level Racing FGT Elite Wheel Plate Edition (E001) - LINK

Next Level Racing ERS2 Reclining Seat (E045) - LINK

Bundle NLR FGT Elite Wheel Plate Edition plus Next Level Racing ERS4 Reclining Seat

Bundle consists of the following items:

Next Level Racing FGT Elite Wheel Plate Edition (E001) - LINK

Next Level Racing ERS4 Reclining Seat (E053) - LINK

Bundle NLR FGT Elite Wheel Plate Edition plus ERS3 seat

Bundle consists of the following items:

Next Level Racing FGT Elite Wheel Plate Edition (E001) - LINK

Next Level Racing ERS3 seat (E050) - LINK

Force2Motion Bundle Qubic Systems BT1

The bundle contains:

• Motion-Systems Qubic System - Belt Tensioner BT1
• Motion-Systems Qubic System - Motion Lock für Seat Belt Tensioner
• Sicherheitsgurt 6-Punkt schwarz
• Force2Motion Adapter für Qubic BT1 Belt-Tensioner an NLR Motion Platform V3 Motion Platform V3, Force2Motion Seatframe oder andere Sitzkonsolen

Price advantage when ordering all four items without modification in the basket!

Motion-Systems Qubic System - CH2.220.3DOF.BT1.FGT.SET Ready2Race-Bundle

What is included in the package:

• CH2 Platform
• 4x QS-220 - linear actuator with cup holder
• 2x QS-SB2 - power cabinet (control module)
• 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
• 3x Power cable - 1 pcs of 1,8m long cable for EU market
• 4x QS brackets (set of 2) for mounting on aluminum profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge) 
• QS-MC6 motion controller set - single unit required to control up to 4 sets of QS (not included - see separate product)
• BT1 Seat-Belt-Tensioner with accessories
• Force2Motion Adapter for Qubic BT1 Belt-Tensioner
• F2M-Adaptersystem FGT-Elite-Qubic
• Next Level Racing FGT 160 - Wheel Plate Edition

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Motion-Systems Qubic System - CH2-220.3DOF.BT1 Ready2Race-Bundle

What is included in the package:

• CH2 Platform
• 4x QS-220 - linear actuator with cup holder
• 2x QS-SB2 - power cabinet (control module)
• 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
• 3x Power cable - 1 pcs of 1,8m long cable for EU market / or 1 pcs of 2m long cable for USA market
• 4x QS brackets (set of 2) for mounting on aluminium profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge) 
• QS-MC6 motion controller set - single unit required to control up to 4 sets of QS (not included - see separate product)
• BT1 Seat-Belt-Tensioner with accessories

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Motion-Systems Qubic System - CH2.210.3DOF.BT1.FGT.SET Ready2Race-Bundle

What is included in the package:

• CH2 Platform
• 4x QS-210 - linear actuator with cup holder
• 2x QS-SB2 - power cabinet (control module)
• 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
• 3x Power cable - 1 pcs of 1,8m long cable for EU market
• 4x QS brackets (set of 2) for mounting on aluminum profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge) 
• QS-MC6 motion controller set - single unit required to control up to 4 sets of QS (not included - see separate product)
• BT1 Seat-Belt-Tensioner with accessories
• Force2Motion Adapter for Qubic BT1 Belt-Tensioner
• F2M-Adaptersystem FGT-Elite-Qubic
• Next Level Racing FGT 160 - Wheel Plate Edition

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Next Level Racing F-GT Elite 160 Wheel Plate Edition - BLACK - Bundle with Side-Mount Adapter (NLR-E42)

Leading features:

• The ultimate, no compromise, all-in-one 160 aluminium profile racing cockpit for the Elite sim racers
• Offering multi-position Formula, Hybrid, GT, Truck, and Tank driving ergonomics
• Premium black anodised aluminium profile with high quality powder-coated carbon steel components and pre-machined holes for ease of assembly and rigidity.
• Compatible with the Next Level Racing® Motion Platforms*
• Pre-Drilled for Universal compatibility with major steering wheels, pedals, shifter, and handbrake manufacturers
• Industry benchmark aluminium extrusion design with bespoke Next Level Racing® End Caps & T-Slot nuts, and Next Level Racing® Flex-Free Seat Sliders and custom Next Level Racing® Shoulder Bolts
• Custom NLR 160mm X 40mm aluminium profile base for strength and rigidity

About:

The Next Level Racing® F-GT Elite 160 Wheel Plate Edition is the definitive, premier simulator cockpit. Built for the Elite, the F-GT Elite 160 Wheel Plate Edition is designed for racers who demand the highest quality and uncompromised rigidity for racing.

The Next Level Racing® F-GT Elite 160 Wheel Plate Edition is the result of extensive research and feedback and is unrivalled when it comes to flex-free, high quality aluminium extrusion simulation cockpits. The F-GT Elite 160 Wheel Plate Edition sets the benchmark for quality and rigidity - from the premium anodised high-grade aluminium extrusion and powder-coated carbon steel components to the bespoke Next Level Racing® end caps and T-slot nuts.

Racers will feel at home in the F-GT Elite 160, with near-infinite adjustability and customisation options available, and is also compatible with the Next Level Racing® Motion Ecosystem*. Featuring industry-leading materials in combination with fine-tuning adjustability and compatibility, the F-GT Elite 160 Wheel Plate Edition offers the most premium immersive simulation experience on the market.

*The Next Level Racing® F-GT Elite 160 is compatible with the Next Level Racing® Motion Platform V3, Motion Plus Platform. Users can attach two Motion Plus Platforms. Users wanting to attach the Traction Plus Platform to the cockpit require the Next Level Racing® Elite Motion Adaptor Upgrade Kit.
 

Motion-Systems Qubic System - CH2-210.3DOF.BT1 Ready2Race-Bundle

What is included in the package:

• CH2 Platform
• 4x QS-210 - linear actuator with cup holder
• 2x QS-SB2 - power cabinet (control module)
• 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
• 3x Power cable - 1 pcs of 1,8m long cable for EU market
• 4x QS brackets (set of 2) for mounting on aluminium profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge) 
• QS-MC6 motion controller set - single unit required to control up to 4 sets of QS (not included - see separate product)
• BT1 Seat-Belt-Tensioner with accessories

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Next Level Racing ERS2 Reclining Seat

Fast Facts:

• designed and constructed with breathable racing suede fabric
• double locking seat recliner for maximum rigidity and angle adjustment
• compatible with Next Level Racing® Elite range of cockpits and GTTrack cockpit
• double locking seat sliders for maximum strength and fine adjustment
• suited for comfort and endurance racing
• universally designed to fit most bottom mounted aluminum cockpit chassis
• patent pending design introducing next level rigidity to reclining seats

About:

Introducing the Next Level Racing® ERS2 Elite Seat for the Elite sim racer. Fully compatible with the Next Level Racing® Elite series and the GTtrack cockpit, the user can directly attach their ERS2 Elite Seat to their cockpit in a matter of minutes. Constructed with breathable racing suede fabric, premium PU Leather, and a wide frame to suit a wide range of users. Patent pending design with the added double-seat recliner for maximum rigidity. Designed for the racing community, the ERS2 provides a motorsport seat design with an angle adjustment that will allow the user to get the exact desired position for long hours. The ERS2 Seat is designed and developed to be a premium product at an affordable price for the sim racing community.
 

Specificatons:
 

• Supported Height – 120 -210 cm or 4ft – 6ft 9 inches
• Supported Max Weight – 150 kg or 330 lbs
• Product Dimensions – 71 x 55 x 92 cm or 28 x 21.7 x 36 inches
• Product Weight – 13.5kg or 29.8 lbs
• Boxed Dimensions – 84.5 x 58 x 39.5 cm
• Boxed Weight – 18.7kg or 41.2 lbs
• Part Number – NLR-E045

 
What's in the box:
 

• Next Level Racing® ERS2 Seat
• Dual locking, quick adjustment seat slider
• Assembly Hardware
• Product manual
• Digital assembly instructions and assembly videos available here: https://bit.ly/nlr-instructions

Compatible Next Level Racing Products:

• Next Level Racing Elite Series cockpit
• Next Level Racing GTtrack

*For future cockpit compatibility, please make sure to check specific product on www.nextlevelracing.com 
 

Next Level Racing GT Racer Cockpit 2.0

Leading Features:

• New wider GT-style racing seat: Larger, improved seat for a more premium, ergonomic, and comfortable racing experience.
• Upgraded double recliners: Reinforced double reclining mechanism for increased rigidity in the backrest, ensuring stability under heavy braking.
• Improved seat sliders: Upgraded double seat sliders for smoother adjustments and improved stability while driving
• Redesigned adjustable pedal tray: Adjustable pedal plate angle for greater compatibility with a wider range of pedals, enhancing customization and comfort.
• Integrated shifter and handbrake support: Left or right-side mounting options for flexibility, making it perfect for Drifting, Rally, and GT racing.
• Compatible with leading brands: Supports up to 13Nm direct drive wheels, pedals, shifters, and handbrakes.
• Affordable racing solution: Combines advanced features and accessibility, offering one of the best value cockpits on the market

About:

Introducing the Next Level Racing® GTRacer Simulator Cockpit, an affordable sim racing solution packed with features. Crafted with precision and purpose-built for GT-style racing. The cockpit includes a premium reclining GT-style seat equipped with seat sliders, integrated shifter/ handbrake support, solid pedal tray and a ButtKicker® mounting pole.
The GTRacer cockpit puts the sim racer in an accurate GT driving position, adding a layer of immersion and unparalleled comfort for extended hours of racing. The GTRacer is designed for a wide range of sim racers, from those new to sim racing, to experienced sim racers that want an affordable stationary cockpit.
 
Video: https://youtu.be/TRBgWphFTAQ  

A full Sim Racing Experience:

The GTRacer Racing cockpit is your gateway to the world of full cockpit sim racing, providing an immersive racing experience, no matter which racing game you're passionate about. The GTRacer offers a dedicated racing cockpit that allows users to hard-mount racing wheels, pedals, shifter, and handbrakes directly to the cockpit. Universally compatible with industry leaders like Thrustmaster, Logitech, Fanatec, and Moza. Take the next step in your sim racing journey and discover the world of competitive esports.

All the extras for Sim Racing:

The GTRacer offers hours of uninterrupted comfort with its adjustable sports-style reclining seat, accommodating sim racers of all shapes and sizes. Its support for shifter and handbrake functionality ensures adaptability across various racing disciplines, from rallycross to conventional cars and drifting. With the GTRacer, you'll enjoy both comfort and adjustability, all while immersing yourself in the thrill of sim racing. Unleash your inner racer.

Built for the Sim Racer:

The GTRacer is purpose-built for the world of sim racing, delivering an authentic racing experience that immerses you in the driver's seat of your favorite race car. This authentic sim racing cockpit seamlessly integrates with your gaming setup, offering enhanced functionality that elevates your experience. Enjoy a sense of stability and comfort that will take your sim racing to the next level.

Unmatched Perfomance:

The GTRacer adopts a unique design approach, ensuring unparalleled performance for racers. With a strong shifter arm that offers both horizontal and vertical adjustment, along with a universal handbrake plate. The wheel plate features an updated hole pattern and adjustable angles for a personalized experience. The pedal plate, equipped with a versatile hole pattern, guarantees reliability during races. Plus, the innovative frame connection design enhances your sim racing experience, ensuring a stable and enjoyable drive.

What's in the box:

• Next Level Racing® GTRacer Cockpit Frame and Seat
• Seat sliders
• Next Level Racing® Shifter and Handbrake Adaptor Plate
• Buttkicker® Adaptor Mount
• Digital assembly instructions and assembly videos available here: https://bit.ly/nlr-instructions

Specifcations:

• Supported Height: 130 cm – 200 cm (3'9" – 6'7")
• Supported Max Weight: 130 kg or 286 lbs.
• Product Dimensions: (L) 162.4 cm x (W) 69.4 cm x (H) 75.9 cm /(L) 63.9 inches x (W) 27.3 inches x (H) 29.9 inches)  
• Box Dimensions: 100.5 cm (L) X 57.5 cm (W) X 43 cm (H)/ 39.6 inches(L) x 22.6 inches (W) x 17 inches(H)
• Product Weight: 37kg or 81.6 lbs.
• Boxed Weight – 42.3 kg or 93.2 lbs.

Compatible NEXT LEVEL RACING® Products:

• Next Level Racing® Lite Free Standing Monitor Stand
• Next Level Racing® Elite Single Free Standing Monitor Stands (Black or Carbon Grey)
• Next Level Racing® Elite Free Standing Triple Monitor Stand (Black Edition)
• Next Level Racing® Free Standing Single Monitor Stand
• Next Level Racing® Free Standing Triple Monitor Stand  
• Next Level Racing® Free Standing Keyboard and Mouse Stand
• Next Level Racing® Floor Mat

Next Level Racing® Flight Stand Pro

Leading features:

• Professional grade stand supporting Commercial, General Aviation, Space, Helicopter, and Military configurations for an authentic flight simulation experience.
• Upgradeable to a professional grade flight cockpit with the addition of the Next Level Racing® Flight Seat Pro*
• Centre HOTAS mounting pole with height and angle adjustment allows for realistic military configuration.
• Compatible with major brands Thrustmaster HOTAS Warthog, VPC Mongoos T-50CM2, WINWING Super Libra, Realsimgear G1000, Winwing Orion 2 for maximum versatility.
• Wide frame design and rudder pedal plate with angle, height, and lateral adjustment accommodates a wide range of rudder pedals.
• Designed for users with limited room and included castor wheels allow for easy transportation.
• Swivel flight plate arm and mouse/keyboard holder with angle adjustment provides convenience and ease of access.
• Premium quality materials used for enhanced durability and included Next Level Racing Flight Keyboard and Mouse Mat
• High-quality materials ensure enhanced durability and compatibility with Next Level Racing Motion Plus**.
• Included Next Level Racing® Gaming Chair Cradle to secure your gaming chair to the Flight Stand Pro

** To make the Next Level Racing® Flight Stand Pro compatible with motion products, the Next Level Racing® Flight Seat Pro needs to be attached to the Flight Stand Pro to make the full Flight Simulator Pro Cockpit. Motion Combination: 1X Motion Plus Platform and 1X Motion Platform V3.

About:

Introducing the Next Level Racing Flight Stand Pro - the ultimate flight simulation experience. With support for commercial, general aviation, and military configurations, this flight stand offers an authentic simulation experience. The centre HOTAS mounting pole with height and angle adjustment allows for true military configuration, and compatibility with major flight electronics. The wide frame design and rudder pedal plate with angle, height, and lateral adjustment accommodates a wide range of rudder pedals. Adaptable to any space, this stand is equipped with castor wheels that allow for easy transportation. The swivel flight arm and mouse/keyboard holder with angle adjustment provides a range of adjustment with customization opportunities. The Flight Stand Pro offers limitless possibilities for your flight simulation. Upgradeable to the full Flight Simulator Pro cockpit with the addition of the Next Level Racing Flight Seat Pro*. For a more immersive experience, the Flight Stand Pro is also compatible with Next Level Racing® Motion Plus Platform and Motion Platform V3 **.

**Next Level Racing® Flight Seat Pro is required to be combined to allow the product motion compatible.
* Next Level Racing® Flight Seat Pro is sold separately.

GT Seat Add-On for Wheel Stand DD/WS 2.0

Features:

Next Level Racing FGT Formula and GT Simulator Cockpit

What’s In The Box

• Next Level Racing FGT frame and seat including seat slider
• Gear shifter holder (can be mounted on left or right side)
• Next Level Racing lumbar support cushion
• Screws to hard mount Your Wheel
• Instructions for Quick and Easy Assembly

Attention: Not compatible with the Next Level Racing Motion Platform!

Next Level Racing GT Elite Racing Simulator Cockpit - Front and Side Mount Edition
 
Leading Features:
 

• Dedicated GT Cockpit with the most authentic and adaptable driving positio
• premium anodized black aluminium finish
• pre-machined precision holes in aluminium profile for rigidity and ease of assembly
• all the extra’s included such as NLR flex free seat slider system, seat brackets, height adjustable shock absorption feet, gear shifter & handbrake support plate, Buttkicker® Gamer 2 adaptor, cable management clips, and tool kit holder
• taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
• rigid and highly adjustable mounting supports included for your seat, wheel, pedals, shifter, handbrake
• pedal position height, angle and distance adjustable
• premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
• fully enclosed base frame for strength and aesthetics as well as one piece aluminium profiles for rigidity required for motion
• compatible with all major brands of electronics for major brands of wheels, pedals and shifters including Fanatec, Thrustmaster, Logitech, Simxperience and many more
• upgradable to be compatible with Next Level Racing® motion products and other accessories
• Front & Side Mount with 70 degrees of adjustability for Direct Drive Wheelbases

About:

Introducing the new Next Level Racing® GTElite Cockpit. The GTElite cockpit’s patent-pending design brings rigidity and stability into a new price point making it the best mid-range aluminium profile cockpit on the market. With attention to detail and engineering as seen on our Elite series, the GTElite compared to mid-range cockpits in its class is more rigid, easier to assemble, provides more inclusions, while providing a higher quality finish.
 
While constructed to suit the mid-range category with a “4080” profile, through cutting edge engineering and manufacturing, combined with unique components, fixtures, and reinforcements, the GTElite is the most rigid mid-range cockpit. Through this innovative process, the GTElite in some cases is stronger than conventional “16040” cockpits seen on the market.
With an extensive ecosystem in mind, the GTElite is upgradable to be compatible with Next Level Racing® Motion Products and has the ability to be transformed into a multi-position cockpit solution with the ready set kits*.
 
*Motion Kit and Formula kit need to be purchased separately.

Next Level Racing GT Elite Racing Simulator Cockpit - Wheel Plate Edition
 
Leading Features:
 

• Dedicated GT Cockpit with the most authentic and adaptable driving positio
• premium anodized black aluminium finish
• pre-machined precision holes in aluminium profile for rigidity and ease of assembly
• all the extra’s included such as nlr flex free seat slider system, seat brackets, height adjustable shock absorption feet, gear shifter & handbrake support plate, Buttkicker® Gamer 2 adaptor, cable management clips, and tool kit holder
• taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
• rigid and highly adjustable mounting supports included for your seat, wheel, pedals, shifter, handbrake
• pedal position height, angle and distance adjustable
• premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
• fully enclosed base frame for strength and aesthetics as well as one piece aluminium profiles for rigidity required for motion
• compatible with all major brands of electronics for major brands of wheels, pedals and shifters including Fanatec, Thrustmaster, Logitech, Simxperience and many more
• upgradable to be compatible with Next Level Racing® motion products and other accessories

About:

Introducing the new Next Level Racing® GTElite Cockpit. The GTElite cockpit’s patent-pending design brings rigidity and stability into a new price point making it the best mid-range aluminium profile cockpit on the market. With attention to detail and engineering as seen on our Elite series, the GTElite compared to mid-range cockpits in its class is more rigid, easier to assemble, provides more inclusions, while providing a higher quality finish.
 
While constructed to suit the mid-range category with a “4080” profile, through cutting edge engineering and manufacturing, combined with unique components, fixtures, and reinforcements, the GTElite is the most rigid mid-range cockpit. Through this innovative process, the GTElite in some cases is stronger than conventional “16040” cockpits seen on the market.
With an extensive ecosystem in mind, the GTElite is upgradable to be compatible with Next Level Racing® Motion Products and has the ability to be transformed into a multi-position cockpit solution with the ready set kits*.
 
*Motion Kit and Formula kit need to be purchased separately.

Motion-Systems Qubic System - QS-210-2.5DOF Motion System - Set

About QS-210

The QS-210 motion system is designed as a more compact iteration of the Qubic System QS-220 industrial-grade linear actuators. This motion set is linear, efficient, easy to connect, and requires no maintenance. The motion system shares the same features as the linear actuators utilized in Qubic System motion cockpits, particularly the attributes of low latency time and real-time vibrations. Tailored for dedicated sim racers and drivers, the QS-210 motion system includes additional sets of brackets that enable racers to install actuators in the most popular aluminum profile based cockpits available on the global market.

Automotive grade performance for your sim racing experience - proudly made in poland

The QS-210 motion system is a high-end motion set designed to deliver an ultra-realistic simracing experience. It incorporates advanced haptic feedback technology that provides precise force feedback, enhancing the sense of immersion. The system comes with dedicated software for customization and frequent updates, making it a favorite among simracing enthusiasts.

QubicManager software is free of charge and develops in house by Motion Systems engineers. QS-210 takes washout filter’s approach to signal processing and motion control to deliver the next level of immersive driving experience. Every bump, road structure, braking, accelerating and vehicle movement is captured and reproduced within 60 mm/ 2.36” of the available actuator’s stroke. Qubic System products are well-supported allowing users to stay engaged with the latest advancements in simracing technology.

60 mm actuator stroke - realism and immersion of the simulation

In sim racing, the actuator stroke refers to the range of motion or travel that a motion actuator or motion platform is capable of producing. Motion actuators are devices that are often used in sim racing setups to provide physical feedback and simulate the sensations of acceleration, braking, cornering, and other movements experienced in real-world driving.

The actuator stroke determines how far and in what directions the motion platform or seat can move. For example, it may refer to the maximum distance the seat can move forward and backward, tilt side to side, or pitch up and down. The stroke length can vary depending on the specific motion platform or simulator hardware being used. Having a sufficient actuator stroke is important in sim racing because it directly impacts the realism and immersion of the simulation. A 60 mm/2.36 in stroke allows for a wider range of motion and can provide a more accurate representation of the forces experienced in a real vehicle. This can make the driving experience in the simulator feel more authentic and responsive, enhancing the overall immersion for the sim racer.

Plug & Play - simple and hassle-free setup process

The installation of the QS-210 motion system is exceptionally straightforward. You can have it up and running within minutes. attaching the four actuators to your aluminum cockpit is a breeze, thanks to the included mounting brackets that come with the motion set. to streamline the process further, you can easily download the qubic manager software with just one click, and it’s completely free of charge. utilizing the step-by-step tutorial, you’ll effortlessly configure the system to your specific preferences. The motion system only requires a power supply of 115/230 vac. In practically no time at all, you’ll be fully prepared to engage in thrilling races.

Enhance stability - precision and customization in simracing

The QS-210 motion set equipped with dedicated brackets allowing precise customization for an immersive racing adventure. These adaptable brackets seamlessly integrate actuators into popular aluminum based cockpits, delivering unwavering stability and an exhilarating virtual racing experience.

In-house software - even most advanced hardware is nothing without good software

Qubic Manager is a in-house professional and specialized software for motion platforms. It is plug-and-play compatible with all major racing and flight titles on PC and is continually updated to support new titles as they are released. The Qubic Manager is a powerful engine, yet it’s simple to use, allowing you to easily adjust levels of motion, bumps, roll, and pitch with a click of a button. This software caters to users of all skill levels. It features an intuitive interface with clear menus and guided setup for beginners. Quick start wizards and predefined profiles simplify the initial configuration. Troubleshooting guides assist with common issues.

Advanced users benefit from an in-depth editor, scripting support, and multi-device integration capabilities. It seamlessly integrates with QS products, enhancing functionality. A vibrant online community shares tips and scripts for collaboration. This decade-developed software empowers both beginners and experts. It’s a versatile tool for enhancing productivity, automation, and control, with a strong Qubic ecosystem.

VR ready - unlocking seamless virtual reality with motion compensation

Qubic Manager software is ready to embrace virtual reality. This means that users can enjoy a complete and authentic simulation experience without integration hassles, thanks to perfect compatibility with VR technology. With Qubic System’s VR Ready software, simulations become more immersive than ever. Realistic sound effects, seamless movements, and impeccable synchronization with visual elements create unforgettable journeys in the virtual world. The entire experience becomes smooth and effortless, allowing users to focus on the sensation itself rather than technical intricacies. Qubic System redefines simulations, enabling entry into a new dimension of simulated travels through the built-in VR HeadWay 2.0 functionality.

Responsive revolution - linear actuators with a latency time of less than 8ms.

Low latency in simracing is crucial for several key reasons:

• Realism: Simracing aims to replicate real-world racing closely. Low latency ensures the virtual car responds in real-time, enhancing immersion by mimicking a real car’s responsiveness.
• Precise Control: Racing games require precise control over steering, braking, and acceleration. Low latency ensures minimal delay in translating your inputs to the game, enabling accurate and responsive control, especially in fast-paced races.
• Safety: In simracing, accidents can happen. Low latency allows quick reactions to track changes, reducing the risk of collisions or losing control.
• Competitive Advantage: Milliseconds matter in simracing competitions. Low-latency setups give drivers a competitive edge by enabling faster reactions and split-second decisions.
• Real-Time Feedback: Low latency provides immediate feedback from input devices, helping drivers understand their vehicle’s behavior and make adjustments during races.
• Consistency: Minimal delay maintains consistent lap times and performance, allowing simracers to execute precise maneuvers consistently.
• Enhanced Experience: Low latency complements high-quality hardware and software, ensuring a seamless interface and an enjoyable racing experience.
• Training and Skill Development: Simracing serves as a training tool for real-world racing. Low latency lets drivers practice and refine skills in a realistic virtual environment, translating into improved on-track performance.

Qubic ecosystem - all-in-one

The Qubic Ecosystem encompasses a collection of various products and one software to control all of the devices, even 3rd party accessories. Within this product ecosystem, a range of motion systems are created to work with one another, resulting in a seamless and integrated racing experience.

Teh QS21ß set is a perfect motion base for most aluminum profile based cockpits available on the global market (using brackets). QS-210 works also with QS-CH2 motion platform (Only as 3DOF set, not with pivot bar!).The concept of the Qubic System product and software ecosystem underscores the idea that the whole system works together synergistically to offer users enhanced value and functionality.

With Motion-Systems Qubic System - QS-Pivot to a 2.5 DOF-System

QS-Pivot is an innovative accessory designed for users seeking the intense sensations typically found in high-end simulators. When combined with QS-210 or QS-220 actuators, it creates a unique 2.5 DOF* configuration that delivers full immersion in driving simulation.

We recognize that many individuals cannot afford the one-time expense of implementing a 3DOF (4 actuators) system for their simulator. To address this, we are introducing the option to take the first step with just 2 actuators using an additional accessory: the pivot leg, which we are thrilled to add to the Qubic System lineup.

Interestingly, if the QS-PIVOT is mounted sufficiently far forward, this setup will create the impression of an additional HEAVE axis, as the motion from the PITCH axis will be so optimized that it feels like translational (vertical) motion to the human vestibular system. Thus, with just 2 actuators combined with the pivot leg, users can achieve a “2.5 DOF” sensation, which may be an excellent starting point for many enthusiasts.* Heave motion pattern combined from pitch axis.

What's included:

QS-210 2.5DOF MOTION Set consists:

• 2x – linear actuator with stabilization plates
• 2x – power cabinet (control module)
• 2x – mounting brackets (set of 2)
• 1x – motion lock cable (up-link/down-link) – 2 m long
• 1x – power cable
• QS-PIVOT
• QS-MC6 Controller Set with 1x – motion lock with additional 2 m long cable

Can be upgraded to a full 3DOF set with an additional optional QS-2102DOF set (not included)!

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Motion-Systems Qubic System - QS-210 Motion System - 3DOF Set

About QS-210

The QS-210 3DoF motion system is designed as a more compact iteration of the Qubic System QS-220 industrial-grade linear actuators. This 3DoF motion set is linear, efficient, easy to connect, and requires no maintenance. The motion system shares the same features as the linear actuators utilized in Qubic System motion cockpits, particularly the attributes of low latency time and real-time vibrations. Tailored for dedicated sim racers and drivers, the QS-210 motion system includes additional sets of brackets that enable racers to install actuators in the most popular aluminum profile based cockpits available on the global market.

Automotive grade performance for your sim racing experience - proudly made in poland

The QS-210 3DoF motion system is a high-end motion set designed to deliver an ultra-realistic simracing experience. It incorporates advanced haptic feedback technology that provides precise force feedback, enhancing the sense of immersion. The system comes with dedicated software for customization and frequent updates, making it a favorite among simracing enthusiasts.

QubicManager software is free of charge and develops in house by Motion Systems engineers. QS-210 takes washout filter’s approach to signal processing and motion control to deliver the next level of immersive driving experience. Every bump, road structure, braking, accelerating and vehicle movement is captured and reproduced within 60 mm/ 2.36” of the available actuator’s stroke. Qubic System products are well-supported allowing users to stay engaged with the latest advancements in simracing technology.

60 mm actuator stroke - realism and immersion of the simulation

In sim racing, the actuator stroke refers to the range of motion or travel that a motion actuator or motion platform is capable of producing. Motion actuators are devices that are often used in sim racing setups to provide physical feedback and simulate the sensations of acceleration, braking, cornering, and other movements experienced in real-world driving.

The actuator stroke determines how far and in what directions the motion platform or seat can move. For example, it may refer to the maximum distance the seat can move forward and backward, tilt side to side, or pitch up and down. The stroke length can vary depending on the specific motion platform or simulator hardware being used. Having a sufficient actuator stroke is important in sim racing because it directly impacts the realism and immersion of the simulation. A 60 mm/2.36 in stroke allows for a wider range of motion and can provide a more accurate representation of the forces experienced in a real vehicle. This can make the driving experience in the simulator feel more authentic and responsive, enhancing the overall immersion for the sim racer.

Plug & Play - simple and hassle-free setup process

The installation of the qs-210 motion system is exceptionally straightforward. You can have it up and running within minutes. attaching the four actuators to your aluminum cockpit is a breeze, thanks to the included mounting brackets that come with the motion set. to streamline the process further, you can easily download the qubic manager software with just one click, and it’s completely free of charge. utilizing the step-by-step tutorial, you’ll effortlessly configure the system to your specific preferences. The motion system only requires a power supply of 115/230 vac. In practically no time at all, you’ll be fully prepared to engage in thrilling races.

Enhance stability - precision and customization in simracing

The qs-210 3dof motion set equipped with dedicated brackets allowing precise customization for an immersive racing adventure. These adaptable brackets seamlessly integrate actuators into popular aluminum based cockpits, delivering unwavering stability and an exhilarating virtual racing experience.

In-house software - even most advanced hardware is nothing without good software

Qubic Manager is a in-house professional and specialized software for motion platforms. It is plug-and-play compatible with all major racing and flight titles on PC and is continually updated to support new titles as they are released. The Qubic Manager is a powerful engine, yet it’s simple to use, allowing you to easily adjust levels of motion, bumps, roll, and pitch with a click of a button. This software caters to users of all skill levels. It features an intuitive interface with clear menus and guided setup for beginners. Quick start wizards and predefined profiles simplify the initial configuration. Troubleshooting guides assist with common issues.

Advanced users benefit from an in-depth editor, scripting support, and multi-device integration capabilities. It seamlessly integrates with QS products, enhancing functionality. A vibrant online community shares tips and scripts for collaboration. This decade-developed software empowers both beginners and experts. It’s a versatile tool for enhancing productivity, automation, and control, with a strong Qubic ecosystem.

VR ready - unlocking seamless virtual reality with motion compensation

Qubic Manager software is ready to embrace virtual reality. This means that users can enjoy a complete and authentic simulation experience without integration hassles, thanks to perfect compatibility with VR technology. With Qubic System’s VR Ready software, simulations become more immersive than ever. Realistic sound effects, seamless movements, and impeccable synchronization with visual elements create unforgettable journeys in the virtual world. The entire experience becomes smooth and effortless, allowing users to focus on the sensation itself rather than technical intricacies. Qubic System redefines simulations, enabling entry into a new dimension of simulated travels through the built-in VR HeadWay 2.0 functionality.

Responsive revolution - linear actuators with a latency time of less than 8ms.

Low latency in simracing is crucial for several key reasons:

• Realism: Simracing aims to replicate real-world racing closely. Low latency ensures the virtual car responds in real-time, enhancing immersion by mimicking a real car’s responsiveness.
• Precise Control: Racing games require precise control over steering, braking, and acceleration. Low latency ensures minimal delay in translating your inputs to the game, enabling accurate and responsive control, especially in fast-paced races.
• Safety: In simracing, accidents can happen. Low latency allows quick reactions to track changes, reducing the risk of collisions or losing control.
• Competitive Advantage: Milliseconds matter in simracing competitions. Low-latency setups give drivers a competitive edge by enabling faster reactions and split-second decisions.
• Real-Time Feedback: Low latency provides immediate feedback from input devices, helping drivers understand their vehicle’s behavior and make adjustments during races.
• Consistency: Minimal delay maintains consistent lap times and performance, allowing simracers to execute precise maneuvers consistently.
• Enhanced Experience: Low latency complements high-quality hardware and software, ensuring a seamless interface and an enjoyable racing experience.
• Training and Skill Development: Simracing serves as a training tool for real-world racing. Low latency lets drivers practice and refine skills in a realistic virtual environment, translating into improved on-track performance.

Qubic ecosystem - all-in-one

The Qubic Ecosystem encompasses a collection of various products and one software to control all of the devices, even 3rd party accessories. Within this product ecosystem, a range of motion systems are created to work with one another, resulting in a seamless and integrated racing experience.

3DoF linear actutors set is a perfect motion base for QS-CH1 cockpit, and most aluminum profile based cockpits available on the global market (using brackets). QS-210 works also with QS-CH2 motion platform.The concept of the Qubic System product and software ecosystem underscores the idea that the whole system works together synergistically to offer users enhanced value and functionality.

What's included:

The QS-210 3DOF MOTION Set consists:

• 4x – QS-210 inear actuator with stabilization plates
• 2x – power cabinet (control module)
• 4x – mounting brackets (2er-Set)
• 1x – motion lock cable (up-link/down-link) – 2 m long
• 2x – power cable
• QS-MC6 Controller with 1x – Motion Lock with 2m cable

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Motion-Systems Qubic System - QS-220-3DOF Motion System - 3 DOF Set - Set with 4 Actuators, 2 Power Cabinet, 4x Brackets and 1x MC6 Controller

About QS-220

Linear actuator technology by Motion Systems allows to develop highly realistic applications with detailed motion textures, velocity, suspension interaction feedback, engine vibrations, tactile feedback, haptic system and vehicle dynamics. Innovative technology, modular and compact design, as well as the quiet operation makes the QS-220 as a perfect motion base not only for professional application but also for home users in various types of cockpits. Additional sets of QS-220 can be configured as a 4 and 6 actuated system to provide 3 / 4 / 6 DOF using dedicated cockpits from Qubic System product line.

By using dedicated software Qubic Manager the user can use several sets to create the most realistic simulation that immediately responds to onscreen situations to deliver real life experience in gaming or VR
applications. Motion Systems is a global leading motion platforms brand for professionals and the most demanding home users. For over 10 year the company has been designing and providing bespoke motion solutions for industry and cutting edge technology for racing and flight simulation.

Fast Facts - Hardware:

Patent pending technology of QS-L1 linear actuators from Qubic System Line allows to develop highly realistic applications with detailed effects from simulation telemetry. Motor drivers have
been designed by Motion Systems company to do just one job, to control motors in vehicle simulator applications and they are exceptionally good at it.

Included power cabinet (control module) QS-SB2 is responsible for the power distribution and communication to handle telemetry signal processing where motion controller dispatches the commands
to drivers which parse the incoming command as soon as the command arrives. Control module sets the motion and vibration cues for each single actuator. The driver works with both 115V and 230V power
network without any adapters or voltage converters.

General specification of QS-220 set:

• Architecture: 2 / 3 / 4 / 6 DOF (depending on user configuration and number of modules)
• Actuator stroke: 100 mm | 3.93 in
• Maximum velocity:
  • Q-Mode (230V): 800 mm/s
  • Performance Mode (115V/230V): 400 mm/s
  • Heavy Duty Mode (115/230V): 300 mm/s
• Maximum acceleration:
  • Q-Mode (230V): 0.8G*
  • Performance Mode (115V/230V): 0.7G*
  • Heavy Duty Mode (115/230V): 0.4G*
  • *value of acceleration is limited for safety reasons.
• Recommended payload in 3DOF (2x QS-220) configuration:
  • Q-Mode: 200kg
  • Performance Mode: 250kg
  • Heavy Duty Mode: 350kg
• Maximum control frequency: 1000 Hz
• Vibrations frequency range: 0-100 Hz
• Latency: <8 ms
• Product weight: 30 kg | 66 lb
• Total length: QS-L1: 90 mm | 3.55 in, QS-SB2: 385 mm | 15.16 in
• Total width: QS-L1: 90 mm | 3.55 in, QS-SB2: 300 mm | 11.81 in
• Total height: QS-L1: 553-653 mm | 22-26 in, QS-SB2: 88 mm | 3.46 in
• Cable length (QS-L1 actuator - QS-SB2 Power cabinet): 1150mm | 45.2 in
• Power supply requirements: 115/230 VAC Single Phase
• Average power consumption in 3DOF configuration:
  • Q-Mode: 260W (230V)
  • Performance Mode: 280W (230V), 270W (115V)
  • Heavy Duty Mode: 436W (230V), 462W (115V)
• Peak current for breaker specification in 3DOF configuration:
  • Q-Mode: 5.17A (230V)
  • Performance Mode: 4.55A (230V), 7.35A (115V)
  • Heavy Duty Mode: 5.88A (230V), 9.89A (115V)
• Connection: USB

Fast Facts - Software:

Even most advanced hardware is nothing without good software. Qubic Manager by Motion Systems company is professional and specialized software for the platform and is "click and play" compatible with
all major racing and flight titles on PC and constantly updated to support new applications as they are released. Gives user possibilities of motion adjustments, motion post-processing, extensive diagnostic or
easy and fast use of predefined profiles. The Qubic Manager is a powerful engine, yet it’s simple to use meaning you can adjust levels of motion, bumps, roll and pitch with a click of a button.

Qubic Manager software license is free-of-charge.

Few main features:

• Over 80+ already integrated and supported racing games and professional simulation applications.
• Included VR Headway technology uses advanced mathematic formulas to calculate necessary compensation and applies it to the VR headset at runtime. It eliminates platform movements from the VR tracking system causing your experiences to be more immersive, authentic and has huge impact on VR sickness compensation.
• The motor control algorithm has been developed to be used strictly in simulation application. The positioning signal is analyzed and preprocessed directly by the driver, so it is possible to change all driver parameters at basically zero cost (time / latency). Drivers parse the incoming command as soon as the command arrives. It also allows to append different types of vibrations (per actuator) on driver level.
• Motion sickness compensation thanks to telemetry data provided in real time directly by the game’s engine and immediately injected to the hardware to perform.
• Equipped with Tactile Audio Based Feedback System that can use tactile trans-ducers (Buttkicker) connected to a seperate sound card to generate additional effects on your cockpit (Buttkicker and additional Soundcard not included - available seperatly).
• Thanks to having full control of the technology Motion Systems company can change control algorithm source code, introduce new parameters and features without waiting for 3rd party vendors. Simple software update can introduce new features to the customers.
• Motion SDK (FSM or FSDI) for software developers is also available as an extra option. That powerful interface allows to add a motion platforms support to any application or game.
• … and many more!

What is included in the package:

• QS-220 3DOF motion set:
  • 4x QS-220 - linear actuator with cup holder
  • 2x QS-SB2 - power cabinet (control module)
  • 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
  • QS-MC6 motion controller set - single unit required to control up to 4 sets of QS-220 and one CH2
  • 2x Power cable - 1 pcs of 1,8m long cable for EU market / or 1 pcs of 2m long cable for USA market
  • 4x QS brackets for mounting on aluminum profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge) 

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Motion-Systems Qubic System - QS-220-2.5DOF Motion System - Set with 2 Aktuators and 1 Power Cabinet and Pivot-Bar

About QS-220

Linear actuator technology by Motion Systems allows to develop highly realistic applications with detailed motion textures, velocity, suspension interaction feedback, engine vibrations, tactile feedback, haptic system and vehicle dynamics. Innovative technology, modular and compact design, as well as the quiet operation makes the QS-220 as a perfect motion base not only for professional application but also for home users in various types of cockpits. Additional sets of QS-220 can be configured as a 4 and 6 actuated system to provide 3 / 4 / 6 DOF using dedicated cockpits from Qubic System product line.

By using dedicated software Qubic Manager the user can use several sets to create the most realistic simulation that immediately responds to onscreen situations to deliver real life experience in gaming or VR
applications. Motion Systems is a global leading motion platforms brand for professionals and the most demanding home users. For over 10 year the company has been designing and providing bespoke motion solutions for industry and cutting edge technology for racing and flight simulation.

Fast Facts - Hardware:

Patent pending technology of QS-L1 linear actuators from Qubic System Line allows to develop highly realistic applications with detailed effects from simulation telemetry. Motor drivers have
been designed by Motion Systems company to do just one job, to control motors in vehicle simulator applications and they are exceptionally good at it.

Included power cabinet (control module) QS-SB2 is responsible for the power distribution and communication to handle telemetry signal processing where motion controller dispatches the commands
to drivers which parse the incoming command as soon as the command arrives. Control module sets the motion and vibration cues for each single actuator. The driver works with both 115V and 230V power
network without any adapters or voltage converters.

General specification of QS-220 set:

• Architecture: 2 / 3 / 4 / 6 DOF (depending on user configuration and number of modules)
• Actuator stroke: 100 mm | 3.93 in
• Maximum velocity:
  • Q-Mode (230V): 800 mm/s
  • Performance Mode (115V/230V): 400 mm/s
  • Heavy Duty Mode (115/230V): 300 mm/s
• Maximum acceleration:
  • Q-Mode (230V): 0.8G*
  • Performance Mode (115V/230V): 0.7G*
  • Heavy Duty Mode (115/230V): 0.4G*
  • *value of acceleration is limited for safety reasons.
• Recommended payload in 3DOF (2x QS-220) configuration:
  • Q-Mode: 200kg
  • Performance Mode: 250kg
  • Heavy Duty Mode: 350kg
• Maximum control frequency: 1000 Hz
• Vibrations frequency range: 0-100 Hz
• Latency: <8 ms
• Product weight: 30 kg | 66 lb
• Total length: QS-L1: 90 mm | 3.55 in, QS-SB2: 385 mm | 15.16 in
• Total width: QS-L1: 90 mm | 3.55 in, QS-SB2: 300 mm | 11.81 in
• Total height: QS-L1: 553-653 mm | 22-26 in, QS-SB2: 88 mm | 3.46 in
• Cable length (QS-L1 actuator - QS-SB2 Power cabinet): 1150mm | 45.2 in
• Power supply requirements: 115/230 VAC Single Phase
• Average power consumption in 3DOF configuration:
  • Q-Mode: 260W (230V)
  • Performance Mode: 280W (230V), 270W (115V)
  • Heavy Duty Mode: 436W (230V), 462W (115V)
• Peak current for breaker specification in 3DOF configuration:
  • Q-Mode: 5.17A (230V)
  • Performance Mode: 4.55A (230V), 7.35A (115V)
  • Heavy Duty Mode: 5.88A (230V), 9.89A (115V)
• Connection: USB

Fast Facts - Software:

Even most advanced hardware is nothing without good software. Qubic Manager by Motion Systems company is professional and specialized software for the platform and is "click and play" compatible with
all major racing and flight titles on PC and constantly updated to support new applications as they are released. Gives user possibilities of motion adjustments, motion post-processing, extensive diagnostic or
easy and fast use of predefined profiles. The Qubic Manager is a powerful engine, yet it’s simple to use meaning you can adjust levels of motion, bumps, roll and pitch with a click of a button.

Qubic Manager software license is free-of-charge.

Few main features:

• Over 80+ already integrated and supported racing games and professional simulation applications.
• Included VR Headway technology uses advanced mathematic formulas to calculate necessary compensation and applies it to the VR headset at runtime. It eliminates platform movements from the VR tracking system causing your experiences to be more immersive, authentic and has huge impact on VR sickness compensation.
• The motor control algorithm has been developed to be used strictly in simulation application. The positioning signal is analyzed and preprocessed directly by the driver, so it is possible to change all driver parameters at basically zero cost (time / latency). Drivers parse the incoming command as soon as the command arrives. It also allows to append different types of vibrations (per actuator) on driver level.
• Motion sickness compensation thanks to telemetry data provided in real time directly by the game’s engine and immediately injected to the hardware to perform.
• Equipped with Tactile Audio Based Feedback System that can use tactile trans-ducers (Buttkicker) connected to a seperate sound card to generate additional effects on your cockpit (Buttkicker and additional Soundcard not included - available seperatly).
• Thanks to having full control of the technology Motion Systems company can change control algorithm source code, introduce new parameters and features without waiting for 3rd party vendors. Simple software update can introduce new features to the customers.
• Motion SDK (FSM or FSDI) for software developers is also available as an extra option. That powerful interface allows to add a motion platforms support to any application or game.
• … and many more!

 

With Motion-Systems Qubic System - QS-Pivot to a 2.5 DOF-System

QS-Pivot is an innovative accessory designed for users seeking the intense sensations typically found in high-end simulators. When combined with QS-210 or QS-220 actuators, it creates a unique 2.5 DOF* configuration that delivers full immersion in driving simulation.

We recognize that many individuals cannot afford the one-time expense of implementing a 3DOF (4 actuators) system for their simulator. To address this, we are introducing the option to take the first step with just 2 actuators using an additional accessory: the pivot leg, which we are thrilled to add to the Qubic System lineup.

Interestingly, if the QS-PIVOT is mounted sufficiently far forward, this setup will create the impression of an additional HEAVE axis, as the motion from the PITCH axis will be so optimized that it feels like translational (vertical) motion to the human vestibular system. Thus, with just 2 actuators combined with the pivot leg, users can achieve a “2.5 DOF” sensation, which may be an excellent starting point for many enthusiasts.* Heave motion pattern combined from pitch axis.

What's included:

QS-220 2.5DOF MOTION Set consists:

• 2x – linear actuator QS 220 with stabilization plates
• 2x – power cabinet (control module)
• 2x – mounting brackets (set of 2)
• 1x – motion lock cable (up-link/down-link) – 2 m long
• 1x – power cable
• QS-PIVOT
• QS-MC6 Controller Set with 1x – motion lock with additional 2 m long cable

Can be upgraded to a full 3DOF set with an additional optional QS-220-2DOF set (not included)!

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Next Level Racing Wheel Stand 2.0

Leading Features:

• Foldable design allows easy storage
• Full range of adjustability for wheel and pedal plate
• Included gear shifter and handbrake support can be used on left or right side of the stand with height adjustment
• Next Level Racing® Game Chair Cradle prevents gaming seat from sliding away under heavy braking
• Compatible with Next Level Racing® GTSeat Add-On to be turned into a full cockpit
• Compatible and predrilled for all major wheels and pedals including Logitech®, Thrustmaster®, Fanatec® and more

About

Introducing the Next Level Racing® Wheel Stand 2.0. With over 10 years of customer feedback on the Next Level Racing® Wheel Stand, we used our expertise to improve every aspect of our first-generation Wheel Stand. By introducing a robotic manufacturing process of laser cutting and welding, it is set to improve functionality and strength with a stronger and more adjustable wheel, pedal, and shifter/handbrake support. The Wheel Stand 2.0* offers a wider range of adjustability and compatibility for sim racing electronics on the market. With the new addition of a shifter and handbrake support and gaming chair cradle, users can have a more immersive sim racing experience. The Wheel Stand 2.0 is also upgradable to a full cockpit with the addition of the Next Level Racing® GTSeat Add-on, and also motion compatible for a full solution.

 

Next Level Racing HF 8 Pro Haptic Feedback Gaming Pad

Main Features

• Over 200% Increase in Torque- Feel the difference in every turn, manoeuvre, and impact. With more than double the torque, the HF8 Pro delivers deeper, more forceful vibrations that hit harder and respond faster—enhancing immersion with every moment.
• Over 400% More Power– Built for intensity. With a massive 400% boost in motor power, the HF8 Pro provides stronger, more consistent feedback—delivering high-energy effects that stay powerful even during long, high-load gaming sessions.
• 60% Faster Motor RPM– Sharper. Quicker. More refined. A 60% increase in motor speed allows the HF8 Pro to deliver rapid, precise vibrations—from subtle surface textures to fast-paced impacts—with stunning clarity and accuracy.
• Real-Time Haptics: 15fps ➝ 75fps HFS Software– Experience ultra-responsive feedback like never before. The upgraded HFS software runs at 75 frames per second, providing near-instant haptic responses with ultra-low latency—so every sensation feels real and in sync.
• SIMAERO Mesh for Breathable Comfort– Stay cool under pressure. The HF8 Pro features our advanced SimAero™ mesh fabric, designed for airflow and comfort during extended sessions—so you stay dry, cool, and focused on the action.
• Upgraded High-Density Foam Padding– Built for endurance. Enhanced thicker foam ensures better pressure distribution and long-lasting comfort—perfect for immersive sessions in your racing or flight setup.

About

The Next Level Racing® HF8 Pro Haptic Gaming Pad is a breakthrough in immersive simulation, built for sim racing and flight enthusiasts who demand more. Featuring over 200% increased torque, 400% more power, and 60% faster motor speed, the HF8 Pro delivers high-fidelity feedback that responds with stunning accuracy—making every race, landing, and engine roar feel incredibly real.
With a new SIMAERO breathable mesh, upgraded high-density foam, and 75fps real-time haptics software, the HF8 Pro combines comfort with cutting-edge performance. Each of the eight individual motors can be fully customized to your preferences through the included HFS software or SimHub, giving you complete control over effects like RPM, braking, turbulence, and more—separately for racing or flight. Universally compatible with all major racing and flight cockpits, the HF8 Pro transforms your seat into a fully immersive simulator that reacts to every move with pinpoint precision.
 
Specifications

• Supported Height: 120cm – 210cm or 3'9" – 6'9"
• Supported Max Weight: 150kg or 331 lbs.
• Product Dimensions: (L) 119 cm x (W) 44 cm or (H) 4 cm /(L) 46.8 inches x W 17.3 inches x H 1.6 inches)  
• Box Dimensions: 67 cm (L) X 13 cm (W) X 45 cm (H)/ 23.4 inches(L) x 5.1 inches (W) x 17.7 inches(H)
• Product Weight: 1.7 kg or 3.7 lbs.
• Boxed Weight – 2.3 kg or 5.1 lbs.
• Part Number – NLR-G006

What's in the box

• Next Level Racing® HF8 Pro Haptic Feedback Gaming Pad  
• Digital assembly instructions and assembly videos are available here: http://bit.ly/nlr-instructions

Compatible products

• Next Level Racing® Racing Cockpits with seats
• Next Level Racing® Flight Cockpits with seats
• Next Level Racing® Seats
• Third Party Gaming Seats**
• Third Party Racing and Flight Seats**

** Please refer to the measurement of the HF8 Pro Gaming Pad to ensure that the product can fit correctly

Motion-Systems Qubic System - Belt Tensioner BT1 - Multi-purpose, dual channel, direct drive seat belt tensioner

Please note: Limited-time special price for pre-orders placed by 10 May 2026!

Note: All BT1 units supplied by us have the ‘new’, quieter power supply unit. Please note: Delivery does not include an IEC power cable – please order separately (only available from us for German and compatible sockets with type E+F safety plugs) or purchase one yourself that complies with the standards in your country (See image ‘Power Requirements’ for requirements)!

The Polish manufacturer Motion Systems, which has developed the "Qubic System" motion platforms has now announced a new sensation: the Belt Tensioner QS-BT1.

And we are a little proud of this development ourselves, as Force2Motion was a driving force behind the development of this extension. With input from the racing and flightsim scene, we persistently fought for Motion Systems to build what we consider to be an indispensable extension for the Qubic systems. And now Motion Systems has introduced this product, which can also be fitted to many stand-alone cockpits without Motion. And of course it's a great extension for those who already have "everything". Well done, guys!

In combination with the BT1V3 adapter developed by us, the Seat Belt Tensioner can be mounted on a Next Level Racing V3 as well as on practically any other seat console. The function of a seat slider for longitudinal adjustment of the seat is fully retained.

Watch the video (sorry German version only)

More info and photos: https://qubicsystem.com/product/qs-bt1/# - Please be sure to follow the instructions on installation (seat height, belt openings on the seats) etc.!

About:

Powered by the same technology as the stunning QS-220, the QS-BT1 is a multi-purpose dual channel direct drive seatbelt tightener that enhances immersion in racing simulations like no other device in its class and price range. It not only complements the force feedback of the direct drive steering wheels, but also enhances the overall experience of the already highly immersive QS motion platforms and can even be used as a standalone, independent device if required.

Simulation of braking, lateral acceleration, cornering at high speed, wheel lock and loss of traction are among the key features of QS-BT1. Asymmetric engine vibrations and road effects such as rumble strips are also available for games that support them. Although QS-BT1 was mainly developed for racing simulations, with its 200 N force per channel it can also be successfully used in flight simulators to give you the feeling of gigantic forces during high acceleration manoeuvres.

Specifications:

• Power source: 4A/115VAC, 2A/230VAC
• Rated power: 321 W
• Inrush current: 20A/115VAC, 40A/230VAC
• Protection class: 1
• Interface: USB
• Number of independent channels (seat belts): 2
• Tensile force: 20.5 kg/45 lbs/200 N per channel
• Storage temperatures: +4°C to +45°C
• Full performance temperatures: +5°C to +35°C
• Computer compatibility: Windows PC
• Supported effects: Depending on the game
• Multifunctional RGB
• Maximum length of USB cable: 3m
• Maximum length of motion lock cable: 3m (motion lock optional)
• Compatibility with motion platforms: QS, PS, HS [1]

Dimensions:

• Main dimensions: 561 x 99 x 138 mm / 22.13 x 3.90 x 5.43 inches
• Weight of the main unit: 12 kg / 26.46 lbs
• Weight of the power supply unit: 2.8 kg / 6.17 lbs
• Dimensions of the packaging box: 660 x 255 x 180 mm / 25.98 x 10.04 x 7.09 in
• Weight of the packaging box: 18kg / 39.68 lbs

Scope of delivery:

• 1x two-channel seat belt tensioner
• 1x power supply unit
• 1x cable set (without power cable!)
• 1x set of screws
• 1x universal bracket for aluminium profile

Optional accessories (recommended):

• Emergency stop switch (motion lock) - is not required if other Qubic systems are present, as the system can be controlled via an (existing) motion lock switch.
• Note: All BT1 units supplied by us have the ‘new’, quieter power supply unit. Please note: Delivery does not include an IEC power cable – please order separately (only available from us for German and compatible sockets with type E+F safety plugs) or purchase one yourself that complies with the standards in your country (See image ‘Power Requirements’ for requirements)!

Note: For the use of seat movers (such as the NLR Motion Platform V3), the QS-BT1 can only be installed on the upper frame of the motion platform near the pivot point and reduces the permissible user weight. A multi-point harness is required and is not included in the scope of delivery.

 

Next Level Racing® Flight Simulator Cockpit - BOEING MILITARY EDITION

LEADING FEATURES

• Dedicated flight cockpit for maximum simulation immersion
• Suited for Combat flight, General Aviation, Commercial flight, and Space Exploration users
• Compatible with flight electronics such as yokes, joysticks, rudders, and throttles for all major brands
• Wide range of adjustments to tailor your flight experience
• Includes keyboard and mouse support for easy navigation with custom Next Level Racing® keyboard and mouse pads
• Compatible with Thrustmaster® / Logitech / Saitek® / Honeycomb/ Virtual Fly/ Crosswind and other flight accessory brands
• Includes Buttkicker® Adaptor, Next Level Racing® Four-point harness, and Lumber Support
• Motion Compatible with added accessories**

Next Level Racing Elite Direct Mount Overhead Monitor Add-On - Black Edition

Leading features:

1. Black anodised aluminum extrusion for a premium finish
2. Compatible with Next Level Racing® Elite Direct Monitor Mount- Black Edition
3. Supports single monitors up to 32” () *
4. Pre-drilled and Laser Alignment lines for easy assembly
5. VESA mount support 75mm X 75mm to 100mm X 100mm
6. Optimized angle and tilt adjustability for refined screen alignment

 
About:

The Next Level Racing® Elite Direct Mount Overhead Monitor Add-on- Black Edition, is the perfect solution for the serious sim racer to create a fully immersive and informational racing experience. The Elite Direct Mount Overhead Monitor Add-on will offer racers the ability to use the overhead screen for a plethora of functions such as live telemetry, streaming software, and more. The Elite Direct Mount Overhead Monitor Add-on is the perfect solution for non-Motion users.

*If you are considering adding the Motion Plat Plus or Traction Plus Platform products, we recommend exploring one of our Elite Free Standing Monitor Solutions as the motion experience during simulation could affect your Monitors/TVs.

Next Level Racing GTTrack Cockpit

The GTtrack is the ultimate cockpit for serious sim racers looking for rigidity, complete adjustability and a true race car seating position. The GTtrack was designed with the close feedback of professional drivers and some of the world's fastest eSports drivers to give you every feature required for serious sim racing. The complete rigidity of the GTtrack allows it to support direct drive wheels and professional pedal sets as weil as being compatible with all major wheel and pedals including Thrustmaster®, Logitech® and Fanatec®.

Features:

• Steering wheel angle and distance adjustability. Pedal angle and distance adjustbility
• Gear shifter distance adjustable
• Pre-drilled for all major brands including Thrustmaster®, Logitech® and Fanatec®
• Built with rigidity to support direct drive wheels and professional pedal sets
• Built with motion in mind - The Next Level Racing® Motion Platform V3 bolts straight on in less than 10 minutes and fully compatible with the Next Level Racing® Traction+ Motion Platform
• lncluded handbrake support for both Thrustmaster® and Fanatec® handbrakes
• Buttkicker Gamer 2 Adapter
• Height adjustable rubber feet and Next Level Racing® Lockable Wheel Gastors
• Box dimensions 100 x 61 x 59 cm - 60 kg