Next Level Racing F-GT Elite - Wheel Plate Edition

• Next Level Racing® Platform Manager Software (Download)
• USB cable
• Power cable
• Steel side panels to directly bolt on to your Next Level Racing® GTultimate Cockpit, Next Level Flight Simulator or retrofit to your existing cockpit
• Manual (english)

1. Compatible with the Next Level Racing® Elite series Cockpits 
2. Wide range of tilt and angle adjustment for fine tunning  
3. Compatible with Mobile Phones, Tablets, and Button Boxes  
4. Tablet Mount Bracket supporting heights from  
5. Button Box Bracket supporting heights from 35mm - 155mm 

1. Black anodised aluminum extrusion for a premium finish
2. Compatible with Next Level Racing® Elite Direct Monitor Mount- Black Edition
3. Supports single monitors up to 32” () *
4. Pre-drilled and Laser Alignment lines for easy assembly
5. VESA mount support 75mm X 75mm to 100mm X 100mm
6. Optimized angle and tilt adjustability for refined screen alignment

1. Carbon Grey anodised aluminum extrusion for a premium finish
2. Compatible with Next Level Racing® Elite range of Cockpits
3. Supports single monitors from 27”- 43” Flat Screens (with compatible VESA mount) *
4. Pre-drilled and Laser Alignment lines for easy assembly and adjustments
5. Supports single Ultra-wide monitors up to 49” (with compatible VESA mount) *
6. VESA mount support 75mm X 75mm to 200mm X 200mm
7. Optimized Vertical and Horizontal adjustability for optimized screen positioning
8. Fine tune adjustments for tilt and angle of the monitor

1. Carbon Grey anodised aluminum extrusion for a premium finish
2. Compatible with Next Level Racing® F-GT Elite Direct Monitor Mount- Carbon Grey
3. Supports single monitors up to 32” () *
4. Pre-drilled and Laser Alignment lines for easy assembly
5. VESA mount support 75mm X 75mm to 100mm X 100mm
6. Optimized angle and tilt adjustability for refined screen alignment

1. Carbon Grey anodised aluminum extrusion for a premium finish
2. Compatible with Next Level Racing® Elite range of Cockpits
3. Supports single monitors from 27”- 43” Flat Screens (with compatible VESA mount) *
4. Pre-drilled and Laser Alignment lines for easy assembly and adjustments
5. Supports single Ultra-wide monitors up to 49” (with compatible VESA mount) *
6. VESA mount support 75mm X 75mm to 200mm X 200mm
7. Optimized Vertical and Horizontal adjustability for optimized screen positioning
8. Fine tune adjustments for tilt and angle of the monitor

• Full Cockpit Mover, simulating vehicle chassis motion with ultimate precision and accuracy
• Market leading technology to feel bumps, corners, rolls, gear shifts and vibrations for peak immersion
• Quick and simple installation, compatible with the Next Level Racing cockpits
• Commercially bulit, but perfect for home use with its compact design and low noise opertaion
• Compatible with all major racing and flight games for PC (Windows)
• 1 Module for 2-DOF and **2 modules for 3-DOF
• Adaotbale to the existing Next Level Racing Motion Ecosystem to continue taking racing to the next level
• Unique pivot bar included for single unit use setups
• Advanced VR Compensation Software to experience smooth prcise VR movement
• Ultra-low latency provides sharp and accurate movement throughout the chassis

1. Includes a variety of Bolts to suit custom DIY setups for extrusion style cockpits
2. Ultra-Low-profile hardware for use on front & side mount components
3. Includes a wide range of comes with a multitude of different fasteners, fixings, and tools to take your setup to the next level
4. Compatible with the Next Level Racing® Elite Series Cockpits and other extrusion type cockpits

• Sway
• Surge
• Roll
• Pitch
• Understeer and front traction loss – (critical feature usually only experienced in 6DOF motion platforms)
• Oversteer and rear traction loss
• Power slides and drifting                                                                          
• Partial Heave                                                                                                                                     
• Vehicle and Road effects such as road surface, bumps, wheel lock/spin, gear changes and more
• Shunting effects (to feel side impact contact from opponents/wall)

• Next Level Racing® Traction Plus Motion Platform
• Next Level Racing® Platform Manager software download
• USB and power cables including ferrite core
• Nuts and Bolts required for assembly
• Product Manual
• Adaptor plates to bolt your Next Level Racing® GTtrack or Next Level Racing® Flight Simulator Pro cockpit (coming 2019) directly to the Traction Plus platform
• Digital assembly instructions and assembly videos available here

• Next Level Racing GTtrack
• Next Level Racing Flight Simulator Pro (coming 2019)
• Next Level Racing Motion Platform V3 (Traction Plus is designed to combine with the V3 motion platform to provide a ground breaking motion simulator experience)
• Other brand or DIY cockpits - As we experienced with the Motion Platform V3, many customers also have the ability to create custom adaption to their cockpit and with the Traction Plus we expect to see the same with mounting holes on top of the platform that users can adapt to use with their own cockpit.
• As with the Motion Platform V3 we do plan to release adaptors for other brand of cockpits

• Solid and rigid design that Supports 24”- 85” monitors
• Universally designed VESA mounting range to allow support for largest range of TV sizes
• Wider design allows the monitor to be placed directly behind the wheel or further away if preferred
• Lockable wheel castors allow portability as well as quick and easy adjustment
• All forms of adjustment including angle, tilt and height

• Sway
• Surge
• Roll
• Pitch
• Understeer and front traction loss – (critical feature usually only experienced in 6DOF motion platforms)
• Oversteer and rear traction loss
• Power slides and drifting                                                                          
• Partial Heave                                                                                                                                     
• Vehicle and Road effects such as road surface, bumps, wheel lock/spin, gear changes and more
• Shunting effects (to feel side impact contact from opponents/wall)

• Next Level Racing® Traction Plus Motion Platform
• Next Level Racing® Platform Manager software download
• USB and power cables including ferrite core
• Nuts and Bolts required for assembly
• Product Manual
• Adaptor plates to bolt your Next Level Racing® GTtrack or Next Level Racing® Flight Simulator Pro cockpit (coming 2019) directly to the Traction Plus platform
• Digital assembly instructions and assembly videos available here

• Next Level Racing GTtrack
• Next Level Racing Flight Simulator Pro (coming 2019)
• Next Level Racing Motion Platform V3 (Traction Plus is designed to combine with the V3 motion platform to provide a ground breaking motion simulator experience)
• Other brand or DIY cockpits - As we experienced with the Motion Platform V3, many customers also have the ability to create custom adaption to their cockpit and with the Traction Plus we expect to see the same with mounting holes on top of the platform that users can adapt to use with their own cockpit.
• As with the Motion Platform V3 we do plan to release adaptors for other brand of cockpits

• Solid and rigid design that supports 3 x 32- 65” monitors
• Universally designed VESA mounting range to allow support for largest range of TV sizes
• Wider design allows the monitor to be placed directly behind the wheel or further away if preferred
• Lockable Castor Wheels allow portability as well as quick and easy angle adjustment of outer screens
• All forms of adjustment including angle, tilt and height

• The Next Level Racing® Free Standing Keyboard and Mouse Stand is free standing so it can be positioned to your preference and also making it compatible with any wheel stand or cockpit.
• Allows easy access to keyboard and mouse when required
• Includes Next Level Racing® Keyboard and Mouse Mats Height Adjustable feet, Instructions for assembly

• Turn your F-GT, FGT-Elite or Challenger into mobile cockpits
• Roll your cockpit around with ease and simply lock the wheels when racing

• Next Level Racing® V3 Motion Platform
• Next Level Racing® Platform Manager Software (Download)
• USB cable
• Power cable
• Steel side panels to directly bolt on to your Next Level Racing® GTultimate Cockpit, Next Level Flight Simulator or retrofit to your existing cockpit
• Manual (english)

1. Ergonomically designed and engineered specifically for sim racing
2. Compatible with all side mounting seat brackets
3. Five-axis Rotationally molded polymer seat for ultimate tensile strength
4. PU molded Foam with premium suede finish
5. Next Level Racing seat belts included for increased immersion and motion users
6. Comfortably fit users up to 42” waist and built rigid to support up to 250 kg users

1. Freestanding design allows preferred screen distance and vertical post mount points (from 720 – 1240mm wide) allows width required for universal compatibility for racing/flight cockpits and commercial applications
2. Post anodised carbon grey aluminium profile with premium powder-coated carbon steel components offers strength for up to 65” screens
3. 600mm of Vertical Adjustment for that perfect monitor placement
4. Universal VESA mounting plate included for maximum compatibility and flexibility (• 200x200mm • 100x200mm • 200x100mm • 150x150mm • 100x100mm • 75x75mm)
5. Custom NLR 100 x 40mm post anodized aluminium profile base

1. The complete, no compromise, all-in-one racing cockpit monitor mount solution for the Elite sim racer
2. Freestanding design allows preferred screen distance and vertical post mount points (from 720 – 1240mm wide) allows width required for universal compatibility for racing/flight cockpits and commercial applications
3. Post anodised carbon grey aluminium profile with premium powder-coated carbon steel components offers strength for up to four 21” – 43” screens
4. Fully adjustable and customizable, offering the most immersive monitor placement setup
5. Universal 3mm thick VESA mounting solutions included for maximum compatibility and flexibility (• 200x200mm • 100x200mm • 200x100mm • 150x150mm • 100x100mm • 75x75mm)
6. Industry benchmark Carbon Grey anodised with high-quality powder-coated carbon steel parts
7. Custom NLR 100x40mm aluminium profile base for strength and rigidity

1. The complete, no compromise, all-in-one racing cockpit monitor mount solution for the Elite sim racer
2. Freestanding design allows preferred screen distance and vertical post mount points (from 720 – 1240mm wide) allows width required for universal compatibility for racing/flight cockpits and commercial applications
3. Post anodised carbon grey aluminium profile with premium powder-coated carbon steel components offers strength for up to four 21” – 43” screens
4. Fully adjustable and customizable, offering the most immersive monitor placement setup
5. Universal 3mm thick VESA mounting solutions included for maximum compatibility and flexibility (• 200x200mm • 100x200mm • 200x100mm • 150x150mm • 100x100mm • 75x75mm)
6. Industry benchmark Carbon Grey anodised with high-quality powder-coated carbon steel parts
7. Custom NLR 100x40mm aluminium profile base for strength and rigidity

1. Post anodized Aluminium Profile construction offers strength for up to three 21”-43” screens
2. Custom-made outer-arm plates provide 42 degrees of adjustable outer screen angle for maximum immersion
3. 2x Universal VESA mounting solutions included for maximum compatibility and flexibility (• 200x200mm • 100x200mm • 200x100mm • 150x150mm • 100x100mm • 75x75mm)
4. Industry benchmark Carbon Grey anodised with high-quality powder-coated steel parts

1. All in one cockpit with quick adjustments for all driving positions including true formula, GT, Hybrid, Truck, and Tank
2. Zero-flex Front & Side Mount with 70 degrees of adjustability for Direct Drive wheelbases
3. Rigid and highly adjustable mounting support included for your seat, wheel, pedals, shifter, handbrake
4. Post anodized custom carbon grey (scratch resistant) aluminium profile with premium carbon steel powder coated components
5. Pedal position height, angle and distance adjustable
6. Pre-machined holes in aluminium profile for rigidity and ease of assembly
7. Compatible and easy installation with Next Level Racing® Motion Platforms
8. All the extra’s included such as NLR seat slider system, seat brackets, height adjustable shock absorption feet, gear shifter & handbrake support plate, foot step, Buttkicker® Gamer 2 adaptor, cable management clips, Motion Platform V3 adaptors, ratchet tool & more
9. Premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
10. T-slot extruded aluminium allows compatibility of accessories with other cockpit brands
11. Fully enclosed base frame for strength and aesthetics
12. Taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
13. Compatible with all major brands of electronics for wheels, pedals and shifters including Fanatec, Simxperience and many more

1. High-quality, precision-made brackets offer the best Direct Drive mount for the Elite Series
2. Constructed from CNC machined 6061 solid anodized aluminium and precision folded carbon steel parts
3. Compatible with BOTH front mount and side mounting direct drive wheels from all leading brands to support customer wheel upgrades

1. Ergonomic Keyboard and Mouse placement for easy reach whilst driving
2. Aluminium construction offers unparalleled strength and versatility
3. Carbon Grey anodised with a high-quality powder-coated finish on carbon steel parts
4. Fits full-sized keyboard and mouse setups

1. All in one cockpit with quick adjustments for all driving positions including true formula, GT, Hybrid, Truck, and Tank
2. Free 12 months iRacing® subscription for new users (110 USD Value)
3. Rigid and highly adjustable mounting support included for your seat, wheel, pedals, shifter, handbrake
4. Post anodized custom carbon grey (scratch resistant) aluminium profile with premium carbon steel powder coated components
5. Pedal position height, angle and distance adjustable
6. Pre-machined holes in aluminium profile for rigidity and ease of assembly
7. Compatible and easy installation with Next Level Racing® Motion Platforms
8. All the extra’s included such as NLR seat slider system, seat brackets, height adjustable shock absorption feet, gear shifter & handbrake support plate, foot step, Buttkicker® Gamer 2 adaptor, cable management clips, Motion Platform V3 adaptors, ratchet tool & more
9. Premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
10. T-slot extruded aluminium allows compatibility of accessories with other cockpit brands
11. Fully enclosed base frame for strength and aesthetics
12. Taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
13. Compatible with all major brands of electronics for major brands of wheels, pedals and shifters including Fanatec, Thrustmaster, Logitech, Simxperience and many more

Next Level Racing® Floor Mat 

Perfect finish to your stand or cockpit whilst protecting your floor at the same time

 Attention: Not suitable for soft wooden floors or laminate (risk of scratching).

• Next Level Racing® Platform Manager Software (Download)
• USB cable
• Power cable
• Steel side panels to directly bolt on to your Next Level Racing® GTultimate Cockpit, Next Level Flight Simulator or retrofit to your existing cockpit
• Manual (english)

• Immersive Bucket Seat Feel – Experience the locked-in sensation of a true racing bucked seat while having the adjustment and comfort of a reclining seat.
• Comfort-Fit Design for Wider Range of Users – Designed to comfortably accommodate users up to a 40” waist, offering a supportive fit
• Industry-First Adjustable Lumbar Support – Custom-tune your lower-back comfort with the first integrated lumbar system designed specifically for sim racing—quick to adjust, fast to dial in, and tailored to each user.
• Smooth Double Reclining Mechanism – Dual recliners offer precise seat angle adjustment while maintaining strength and stability under load.
• Dual Seat Sliders – Easily slide forward or back to find the perfect position—ideal for shared setups or fine-tuning your racing posture.
• Breathable Performance Mesh – High-quality mesh fabric keeps you cool and focused during intense races with enhanced airflow.
• Broad Compatibility – Works seamlessly with Next Level Racing® Elite cockpits and other third-party bottom-mounted cockpits.

• ideal for long sessions and high-performance driving. With its comfort-fit structure
• engineered to support users up to a 40” waist
• the PRS2 delivers an ergonomic and immersive experience built for serious sim racers.

• Next Level Racin® Elite Series cockpit
• Next Level Racing® Frame only cockpits 
• Third Party Racing Cockpits- Please ensure you are measuring the mounting point on your cockpit.

F2M Adapter System FGT-Elite-Qubic – Base Plate

The F2M Adapter System FGT-Elite-Qubic allows the Qubic actuator system QS210 or QS220 to be mounted on the Next Level Racing FGT Elite cockpit.

Please refer to the relevant product description for the complete system. This item contains only the base plate with the necessary screws and slotted nuts

1. High-quality, precision-made brackets offer the best Direct Drive mount for the Elite Series
2. Constructed from CNC machined 6061 solid anodized aluminium and precision folded carbon steel parts
3. Compatible with BOTH front mount and side mounting direct drive wheels from all leading brands to support customer wheel upgrades

1. Carbon Grey anodised aluminum extrusion for a premium finish
2. Compatible with Next Level Racing® Elite range of Cockpits
3. Supports single monitors from 27”- 43” Flat Screens (with compatible VESA mount) *
4. Pre-drilled and Laser Alignment lines for easy assembly and adjustments
5. Supports single Ultra-wide monitors up to 49” (with compatible VESA mount) *
6. VESA mount support 75mm X 75mm to 200mm X 200mm
7. Optimized Vertical and Horizontal adjustability for optimized screen positioning
8. Fine tune adjustments for tilt and angle of the monitor

• FIA Licensed Excellence: Official FIA Licensed Product, meeting the highest standards of motorsport simulation equipment.
• Durable Recliner Mechanism: Enhanced strength and stability with a robust double recliner mechanism.
• Premium PU Leather & Suede Finish: Combines luxury and durability for a sleek, professional look
• Ergonomic and Versatile Design: Suitable for GT racing, truck driving, and farming simulations.
• Built for Long Sessions: Engineered for durability and support, perfect for intense use.

• Designed specifically for a seamless sim racing experience
• Enhanced strength and durability for rigorous use with double recliners
• Ideal for prolonged racing sessions, focused on user comfort
• Open feel to suit a wide range of users, including GT racing, truck, and farming simulations
• High-quality finish for a premium touch and lasting durability

• Supported Height: 120 cm – 210 cm (3'9" – 6'9")
• Supported Max Weight: 150 kg or 330 lbs.
• Product Dimensions: (L) 63 cm x (W) 58 cm or (H) 98.6 cm /(L) 24.8 inches x W 22.8 inches x H 38.8 inches)  
• Box Dimensions: 83 x 60 x 38 cm / 32.7 x 23.6 x 15 inches
• Product Weight: 15.6 kg or 34.4 lbs.
• Boxed Weight – 19 kg or 42 lbs.
• Part Number – NLR-E050

• Next Level Racing® ERS3 Elite Reclining Seat
• Seat slides
• Mounting hardware
• Digital assembly instructions and assembly videos available here: http://bit.ly/nlr-instructions
• Any controllers and accessories shown are NOT included!

• Next Level Racing® Elite Series cockpits
• Next Level Racing® GTtrack cockpit
• Next Level Racing® GTtrack Frame Only
• Next Level Racing® GTRacer Cockpit
• Next Level Racing® HF8 Haptic Feedback Gaming Pad
• Next Level Racing® GTSeat Add-on
• Next Level Racing® F-GT Cockpit* (For the F-GT Cockpit compatibility, the user is required to use the seat sliders that come with the F-GT cockpit and remove the shifter plate from the cockpit)
• Next Level Racing® F-GT Frame Only* (For the F-GT Cockpit compatibility, the user is required to use the seat sliders that come with the F-GT cockpit and remove the shifter plate from the cockpit)

• Premium Standalone Flight Simulator Seat: Purpose-built for flight simulation, delivering immersive pilot ergonomics and stability.
• Industry First Integrated Lateral & Vertical Lumbar Adjustment: Fine-tune lower back support for maximum comfort during extended sessions.
• Adjustable Armrests: Optimized arm positioning for natural control of yokes and HOTAS setups.
• Seat Sliders & Double Recliners Included: Enhanced rigidity with quick angle and forward/backward adjustment.
• Wide Compatibility Across Flight Setups: Designed to integrate seamlessly with the Next Level Racing® Flight Simulator range and third-party cockpits.
• Rear Storage Pocket: Convenient storage for accessories and essential flight tools.

• Next Level Racing® V3 Motion Platform
• Next Level Racing® Platform Manager Software (Download)
• USB cable
• Power cable
• Steel side panels to directly bolt on to your Next Level Racing® GTultimate Cockpit, Next Level Flight Simulator or retrofit to your existing cockpit
• Manual (english)

• designed and constructed with breathable racing suede fabric
• double locking seat recliner for maximum rigidity and angle adjustment
• compatible with Next Level Racing® Elite range of cockpits and GTTrack cockpit
• double locking seat sliders for maximum strength and fine adjustment
• suited for comfort and endurance racing
• universally designed to fit most bottom mounted aluminum cockpit chassis
• patent pending design introducing next level rigidity to reclining seats

• Supported Height – 120 -210 cm or 4ft – 6ft 9 inches
• Supported Max Weight – 150 kg or 330 lbs
• Product Dimensions – 71 x 55 x 92 cm or 28 x 21.7 x 36 inches
• Product Weight – 13.5kg or 29.8 lbs
• Boxed Dimensions – 84.5 x 58 x 39.5 cm
• Boxed Weight – 18.7kg or 41.2 lbs
• Part Number – NLR-E045

• Next Level Racing® ERS2 Seat
• Dual locking, quick adjustment seat slider
• Assembly Hardware
• Product manual
• Digital assembly instructions and assembly videos available here: https://bit.ly/nlr-instructions

• Next Level Racing Elite Series cockpit
• Next Level Racing GTtrack

• Dual mounting options for Shifter and Handbrakes
• Compatible with the Next Level Racing® F-GT, F-GT Lite, GTLite, GTLite Pro, and Wheel Stand 2.0
• Compatible with shifters and handbrakes from most major brands
• Quick and easy installation to the cockpit  

1. Compatible with the Next Level Racing® Elite series Cockpits 
2. Wide range of tilt and angle adjustment for fine tunning  
3. Compatible with Mobile Phones, Tablets, and Button Boxes  
4. Tablet Mount Bracket supporting heights from  
5. Button Box Bracket supporting heights from 35mm - 155mm 

1. Ergonomic Keyboard and Mouse placement for easy reach whilst driving
2. Aluminium construction offers unparalleled strength and versatility
3. Carbon Grey anodised with a high-quality powder-coated finish on carbon steel parts
4. Fits full-sized keyboard and mouse setups

• See it, play it, feel it with advanced haptic perception at an affordable price
• Eight individual vibration motors for the ultimate haptic experience
• Enhanced gaming experience on PC via Next Level Racing® HFS plug-and-play software using telemetry data
• Suitable for game consoles with 3.5mm audio jack (headset/speakers required for Playstation users)
• Universal design for all types of seats, including gaming, sim racing and flight seats
• Enhanced haptic experience for gaming, as well as VR, videos and music
• Designed for sim racing, flight sims and first-person shooters

1. All in one cockpit with quick adjustments for all driving positions including true formula, GT, Hybrid, Truck, and Tank
2. Zero-flex Front & Side Mount with 70 degrees of adjustability for Direct Drive wheelbases
3. Rigid and highly adjustable mounting support included for your seat, wheel, pedals, shifter, handbrake
4. Post anodized custom carbon grey (scratch resistant) aluminium profile with premium carbon steel powder coated components
5. Pedal position height, angle and distance adjustable
6. Pre-machined holes in aluminium profile for rigidity and ease of assembly
7. Compatible and easy installation with Next Level Racing® Motion Platforms
8. All the extra’s included such as NLR seat slider system, seat brackets, height adjustable shock absorption feet, gear shifter & handbrake support plate, foot step, Buttkicker® Gamer 2 adaptor, cable management clips, Motion Platform V3 adaptors, ratchet tool & more
9. Premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
10. T-slot extruded aluminium allows compatibility of accessories with other cockpit brands
11. Fully enclosed base frame for strength and aesthetics
12. Taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
13. Compatible with all major brands of electronics for wheels, pedals and shifters including Fanatec, Simxperience and many more

Technical specifications:

• Architecture 2 DOF
• Payload 130 kg
• Product weight: 33 kg
• Total length 417 mm | 16.41 in
• Total width 460 mm | 18.11 in
• Total height 231 mm | 9.09 in
• Storage temperature: +5 °C to +40 °C
• Supported effects: depending on the game
• Interface: USB
• Computer Windows PC
• Maximum length of USB cable: 3 m
• Maximum length of Motion Lock cable: 3 m
• Voltage range: 110C-240 VAC
• Frequency: 50-60 Hz
• Maximum current consumption: 10.43 A
• Maximum power consumption: 480 W

Scope of delivery:

• MAIN UNIT (QS-H13)
• USB cable
• External power supply
• Mounting adapter for aluminium cockpits
• Mounting adapter for BT1
• Motion Lock jumper and connection cable
• Qubic Manager (free licence included)

NOT INCLUDED (sold separately):

• Motion SDK – ForceSeatDI
• Motions SDK – ForceSeatMI | Motion Theater
• Seat angle
• Motion lock switch (emergency stop)

Important safety information:

The QS-H13 Challenger Seat Mover does not have any so-called E-brakes, which means that the seat can be moved by hand when switched off. If the centre of gravity of the seat is not above the centre point of the H13 (e.g. when mounting a BT1 at the rear), the seat may slowly move into one of the end positions (e.g. tilted backwards) after the power supply has been switched off or the optional emergency stop switch has been activated. Therefore, it is essential to ensure that the seat can always move freely and to mechanically lock the seat during installation work!

1. The complete, no compromise, all-in-one racing cockpit monitor mount solution for the Elite sim racer
2. Freestanding design allows preferred screen distance and vertical post mount points (from 720 – 1240mm wide) allows width required for universal compatibility for racing/flight cockpits and commercial applications
3. Post anodised carbon grey aluminium profile with premium powder-coated carbon steel components offers strength for up to four 21” – 43” screens
4. Fully adjustable and customizable, offering the most immersive monitor placement setup
5. Universal 3mm thick VESA mounting solutions included for maximum compatibility and flexibility (• 200x200mm • 100x200mm • 200x100mm • 150x150mm • 100x100mm • 75x75mm)
6. Industry benchmark Carbon Grey anodised with high-quality powder-coated carbon steel parts
7. Custom NLR 100x40mm aluminium profile base for strength and rigidity

• NLR GT Elite Cockpit on Traction Plus (with Next Level Racing® GTElite Motion Adaptor Upgrade Kit).
• NLR FGT Elite Cockpit on Traction Plus
• NLR GTTrack Cockpit on Traction Plus
• NLR GTTrack Wheel Stand on Traction Plus (extension bracket required)
• NLR Wheel Stand 2.0 on Traction Plus (extension carrier required)
• NLR FGT Cockpit on Traction Plus (extension carrier required)
• NLR FGT Cockpit on Traction Plus (only extension carrier required - you do need the base support (bootom) for this!)
• Custom-built cockpits and third-party cockpits with Motion Plus on Traction Plus (Please enquire and seek advice individually!).

• Immersive Bucket Seat Feel – Experience the locked-in sensation of a true racing bucket seat while having the adjustment and comfort of a reclining seat. 
• Supportive Fit for Serious Racers – Designed to comfortably accommodate users up to a 38” waist.
• Industry-First Adjustable Lumbar Support – Custom-tune your lower-back comfort with the first integrated lumbar system designed specifically for sim racing—quick to adjust and built for long sessions.
• Smooth Double Reclining Mechanism – Dual recliners offer precise seat angle adjustment while maintaining strength and stability under load.
• Dual Seat Sliders – Easily slide forward or back to find the perfect position—ideal for shared setups or fine-tuning your racing posture.
• Breathable Performance Mesh – High-quality mesh fabric keeps you cool and focused during intense races with enhanced airflow.
• Broad Compatibility – Works seamlessly with Next Level Racing® Elite cockpits, and other third-party bottom-mounted cockpits.

• Next Level Racing® PRS1 Performance Reclining Seat
• Digital assembly instructions and assembly videos are available here: https://bit.ly/nlr-instructions 

• Supported height: 120cm – 210cm or 3'9" – 6'9"
• Supported max weight: 150kg or 331 lbs.
• Supported waist size: Up to 38’ waist
• Product dimensions: (L) 63 cm x (W) 49 cm or (H) 95 cm /(L) 24.8 inches x W 19.3 inches x H 19.7 inches)  
• Box dimensions: 101 cm (L) X 56 cm (W) X 32.5 cm (H)/ 39.8 inches(L) x 22 inches (W) x 12.8 inches(H) 
• Product weight: 17.8 kg or 39.2 lbs.
• Boxed weight – 22.5 kg or 49.6 lbs.
• Part number – NLR-E057

• Next Level Racin® Elite Series cockpit
• Next Level Racing® Frame only cockpits 
• Third Party Racing Cockpits- Please ensure you are measuring the mounting point on your cockpit.

• Full Cockpit Mover, simulating vehicle chassis motion with ultimate precision and accuracy
• Market leading technology to feel bumps, corners, rolls, gear shifts and vibrations for peak immersion
• Quick and simple installation, compatible with the Next Level Racing cockpits
• Commercially bulit, but perfect for home use with its compact design and low noise opertaion
• Compatible with all major racing and flight games for PC (Windows)
• 1 Module for 2-DOF and **2 modules for 3-DOF
• Adaotbale to the existing Next Level Racing Motion Ecosystem to continue taking racing to the next level
• Unique pivot bar included for single unit use setups
• Advanced VR Compensation Software to experience smooth prcise VR movement
• Ultra-low latency provides sharp and accurate movement throughout the chassis

• Over 200% Increase in Torque- Feel the difference in every turn, manoeuvre, and impact. With more than double the torque, the HF8 Pro delivers deeper, more forceful vibrations that hit harder and respond faster—enhancing immersion with every moment.
• Over 400% More Power– Built for intensity. With a massive 400% boost in motor power, the HF8 Pro provides stronger, more consistent feedback—delivering high-energy effects that stay powerful even during long, high-load gaming sessions.
• 60% Faster Motor RPM– Sharper. Quicker. More refined. A 60% increase in motor speed allows the HF8 Pro to deliver rapid, precise vibrations—from subtle surface textures to fast-paced impacts—with stunning clarity and accuracy.
• Real-Time Haptics: 15fps ➝ 75fps HFS Software– Experience ultra-responsive feedback like never before. The upgraded HFS software runs at 75 frames per second, providing near-instant haptic responses with ultra-low latency—so every sensation feels real and in sync.
• SIMAERO Mesh for Breathable Comfort– Stay cool under pressure. The HF8 Pro features our advanced SimAero™ mesh fabric, designed for airflow and comfort during extended sessions—so you stay dry, cool, and focused on the action.
• Upgraded High-Density Foam Padding– Built for endurance. Enhanced thicker foam ensures better pressure distribution and long-lasting comfort—perfect for immersive sessions in your racing or flight setup.

• Supported Height: 120cm – 210cm or 3'9" – 6'9"
• Supported Max Weight: 150kg or 331 lbs.
• Product Dimensions: (L) 119 cm x (W) 44 cm or (H) 4 cm /(L) 46.8 inches x W 17.3 inches x H 1.6 inches)  
• Box Dimensions: 67 cm (L) X 13 cm (W) X 45 cm (H)/ 23.4 inches(L) x 5.1 inches (W) x 17.7 inches(H)
• Product Weight: 1.7 kg or 3.7 lbs.
• Boxed Weight – 2.3 kg or 5.1 lbs.
• Part Number – NLR-G006

• Next Level Racing® HF8 Pro Haptic Feedback Gaming Pad  
• Digital assembly instructions and assembly videos are available here: http://bit.ly/nlr-instructions

• Next Level Racing® Racing Cockpits with seats
• Next Level Racing® Flight Cockpits with seats
• Next Level Racing® Seats
• Third Party Gaming Seats**
• Third Party Racing and Flight Seats**

• Crossbar 80x40 for rocker Powder coating black fine structure
• 4x angle pieces for fastening Powder coating black fine structure
• 2x plugs 80x40
• Slot nuts, screws, nuts and washers
• Instructions in German (English in preparation)

1. Post anodized Aluminium Profile construction offers strength for up to three 21”-43” screens
2. Custom-made outer-arm plates provide 42 degrees of adjustable outer screen angle for maximum immersion
3. 2x Universal VESA mounting solutions included for maximum compatibility and flexibility (• 200x200mm • 100x200mm • 200x100mm • 150x150mm • 100x100mm • 75x75mm)
4. Industry benchmark Carbon Grey anodised with high-quality powder-coated steel parts

• Eergonomically designed and engineered specifically for sim racing
• Official Ferrari licensed product
• Compatible with all side mounting seat brackets
• PU molded foam with premium suede finish
• Five-axis rotationally molded polymer seat for ultimate tensile strength
• Next Level Racing branded red seat belts included for increased immersion and motion users
• Comfortably fit users up to 42” waist and built rigid to support up to 250kg users

1. Includes a variety of Bolts to suit custom DIY setups for extrusion style cockpits
2. Ultra-Low-profile hardware for use on front & side mount components
3. Includes a wide range of comes with a multitude of different fasteners, fixings, and tools to take your setup to the next level
4. Compatible with the Next Level Racing® Elite Series Cockpits and other extrusion type cockpits

1. Ergonomically designed and engineered specifically for sim racing
2. Compatible with all side mounting seat brackets
3. Five-axis Rotationally molded polymer seat for ultimate tensile strength
4. PU molded Foam with premium suede finish
5. Next Level Racing seat belts included for increased immersion and motion users
6. Comfortably fit users up to 42” waist and built rigid to support up to 250 kg users

F2M Adapter System FGT-Elite-Qubic – Bracket Set 4x2

The F2M Adapter System FGT-Elite-Qubic allows the Qubic actuator system QS210 or QS220 to be mounted on the Next Level Racing FGT Elite cockpit.

The F2M base plate is also available separately as an option; this not only provides the aluminium cockpit with a sturdy base but also allows the Qubic actuator control units to be mounted from below. This plate is not included in this set (see separate item!

The F2M-Qubic Actuator Adapter System FGT is designed for mounting Qubic 210/220 actuators on cockpits such as the Next Level Racing FGT and FGT160 series or similar aluminium square-profile cockpits.

Here, there are still attachments on the outer side of the longitudinal beams (such as the struts for the pedal plates, which protrude sideways beyond the longitudinal profiles). This means that the standard Qubic actuator brackets cannot be fitted at this point. The F2M-Qubic Actuator Adapter System FGT consists of 8 identical brackets (2 per actuator), with the actuator mounted 40 mm offset outwards. This creates the necessary space to ensure the actuators do not collide with the protruding mounting parts.

The brackets have various mounting holes (some of which are slotted) to compensate for manufacturing tolerances and to allow them to be fixed at different heights or to aluminium longitudinal profiles of varying heights (80 to 160 mm with 2 to 4 slotted rails). Both the QS210 and QS220 actuators can be used (no mixed configuration!).

When mounting the entire cockpit on a Qubic CH2, ensure that the longitudinal distance between the front and rear actuators is 1114 mm, as specified in the Qubic manual. This is achieved by adjusting the adapter brackets via the slotted holes.

The F2M base plate is also available separately as an option; this not only provides the aluminium cockpit with a sturdy floor but also allows the Qubic actuator control units to be mounted underneath. This plate is not included in this set (see separate item)!

The entire system is compatible with the Qubic CH2.

Note:

The Qubic Adapter Set for Wider Cockpits is required to mount the wider cockpits onto a CH2. This is included with the CH2 for units shipped from May 2025 onwards. For units purchased prior to this date, the set must be purchased separately.

•  NLR GTTrack Wheel Stand on Traction Plus (base adapter required)
•  NLR Wheel Stand DD on Traction Plus (base adapter required)
•  NLR Wheel Stand DD without Traction Plus
•  NLR Wheel Stand 2.0 on Traction Plus (basic adapter required)
•  NLR Wheel Stand 2.0 without Traction Plus
•  NLR FGT Cockpit on Traction Plus (base adapter required)
•  NLR FGT Cockpit without Traction Plus

• 2x side member with holes in specified colour
• 4x end plugs in black plastic
• 2x cross member top/outside with thread at the head sides
• 2x upper cross member for upper floor panel
• 2x top floor panel as step protection, bracing and mounting for various cockpits
• 1x top cross member for mounting rocker (original pivot bar when mounting only one Motion Plus platform)
• Slot nuts, screws, nuts and washers
• Instructions in German (English in preparation)

• Motion platforms, Traction Plus, V3 etc and cockpits not included. The article presented here only contains the parts described under "Scope of delivery".
• When mounting the system on an NLR Traction Plus system, please note the maximum payload of 235 kg (incl. driver)!
• There are various options for this article, which are shown in the compatibility matrix.

• 1x Motion Plus cross member (for mounting a second Motion Plus platform) according to the selected colour or coating.
• 2x corner plates powder coating black fine structure
• Slot nuts, screws, nuts and washers
• Instructions in German (English in preparation)

• Base plate black powder-coated 5 mm drilled for NLR FGT Elite
• T-nuts
• screws
• 4x double sets of actuator brackets for wider actuator mounting - A double set consists of two identical / mirrored brackets.
•  Any controllers and accessories shown are NOT included!

1. The complete, no compromise, all-in-one racing cockpit monitor mount solution for the Elite sim racer
2. Freestanding design allows preferred screen distance and vertical post mount points (from 720 – 1240mm wide) allows width required for universal compatibility for racing/flight cockpits and commercial applications
3. Post anodised carbon grey aluminium profile with premium powder-coated carbon steel components offers strength for up to four 21” – 43” screens
4. Fully adjustable and customizable, offering the most immersive monitor placement setup
5. Universal 3mm thick VESA mounting solutions included for maximum compatibility and flexibility (• 200x200mm • 100x200mm • 200x100mm • 150x150mm • 100x100mm • 75x75mm)
6. Industry benchmark Carbon Grey anodised with high-quality powder-coated carbon steel parts
7. Custom NLR 100x40mm aluminium profile base for strength and rigidity

Bundle NLR FGT Elite Wheel Plate Edition plus Next Level Racing ERS4 Reclining Seat

Bundle consists of the following items:

Next Level Racing FGT Elite Wheel Plate Edition (E001) - LINK

Next Level Racing ERS4 Reclining Seat (E053) - LINK

Bundle NLR FGT Elite Wheel Plate Edition plus ERS3 seat

Bundle consists of the following items:

Next Level Racing FGT Elite Wheel Plate Edition (E001) - LINK

Next Level Racing ERS3 seat (E050) - LINK

1. Black anodised aluminum extrusion for a premium finish
2. Compatible with Next Level Racing® Elite Cockpit products
3. Optimized swivel, angle, and tilt adjustability
4. Customized Next Level Racing® Cable management clips included

• Designed to make the Next Level Racing® F-GT cockpit and Next Level Racing® Flight Simulators compatible with the Next Level Racing ®Motion Plus Platform or Traction Plus Platform.
• Constructed with premium black aluminum and Carbon Steel components for strength and rigidity.
• Can attach up to 2 Next Level Racing® Motion Platforms to the Motion Adaptor Frame

• 1x Next Level Racing® Motion Plus Platform
• 2X Next Level Racing® Motion Plus Platform
• 1X Next Level Racing® Traction Plus Platform

• 1x Next Level Racing® Motion Plus Platform
• 2X Next Level Racing® Motion Plus Platform
• 1X Next Level Racing® Traction Plus Platform

• FIA Licensed Excellence: Official FIA Licensed Product, meeting the highest standards of motorsport simulation equipment.
• Racing Seat Immersion: A more fitted solution, replicating a racing seat for users seeking heightened immersion.
• Durable Recliner Mechanism: Enhanced strength and stability with a robust double recliner mechanism.
• Breathable SIMAERO Mesh Fabric: Superior airflow and comfort during extended racing sessions.
• Built for Precision and Comfort: Engineered for durability and ergonomic support during intense use.

• Industry First Premium Hydro-Dip Carbon Finish – Delivers a sleek, high-end look that sets it apart from standard racing seats.
• FIA Official Licensed Product – Meets the highest standards of motorsport simulation authenticity.
• Hybrid Comfort Design – Ideal balance of support and cushioning for both endurance and sprint racing.
• Wide Fit with Enhanced Shoulder Support – Accommodates users up to a 42” waist with a secure, ergonomic feel.
• Integrated Leg and Lumbar Support – Provides improved pedal control and posture for long sessions.

• Designed to make the Next Level Racing® Motion Plus Platform compatible with the Next Level Racing ® Traction Plus Platform.
• Constructed with premium black anodized aluminum and carbon steel components for strength and rigidity.
• Can attach the Next Level Racing® Motion Plus Platform either to the front or the rear of the frame.

1. All in one cockpit with quick adjustments for all driving positions including true formula, GT, Hybrid, Truck, and Tank
2. Free 12 months iRacing® subscription for new users (110 USD Value)
3. Rigid and highly adjustable mounting support included for your seat, wheel, pedals, shifter, handbrake
4. Post anodized custom carbon grey (scratch resistant) aluminium profile with premium carbon steel powder coated components
5. Pedal position height, angle and distance adjustable
6. Pre-machined holes in aluminium profile for rigidity and ease of assembly
7. Compatible and easy installation with Next Level Racing® Motion Platforms
8. All the extra’s included such as NLR seat slider system, seat brackets, height adjustable shock absorption feet, gear shifter & handbrake support plate, foot step, Buttkicker® Gamer 2 adaptor, cable management clips, Motion Platform V3 adaptors, ratchet tool & more
9. Premium packaging including double boxing and foam moulded cut outs for aluminium profile and parts
10. T-slot extruded aluminium allows compatibility of accessories with other cockpit brands
11. Fully enclosed base frame for strength and aesthetics
12. Taller aluminium profile for wheel mount uprights allowing for wider range of driving positions and users
13. Compatible with all major brands of electronics for major brands of wheels, pedals and shifters including Fanatec, Thrustmaster, Logitech, Simxperience and many more

Next Level Racing® Floor Mat 

Perfect finish to your stand or cockpit whilst protecting your floor at the same time

 Attention: Not suitable for soft wooden floors or laminate (risk of scratching).

• 6-Zone Active Cooling: Integrated high-performance fans (3 in seat base, 3 in backrest) deliver targeted airflow for maximum cooling during extended sessions.
• All-in-One Ventilated Design: Factory-finished and fully integrated with internal electronics and dual fan speed settings—no DIY required.
• Premium SIMAERO Mesh Upholstery: Breathable, racing-grade fabric enhances airflow and comfort to reduce heat build-up.
• Dual Recliner Mechanism: Patent-pending double locking recliners ensure quick angle adjustment and superior rigidity under load.
• Pre-Installed Dual Seat Sliders: Allows fast forward/backward adjustment—perfect for shared rigs or commercial setups.
• Ergonomic Fit for All Racers: Designed to support a wide range of body types, from casual players to competitive sim racers.
• Official FIA Licensed Product- Official FIA Licensed Product developed to meet the highest standards of sim racing.

1. Freestanding design allows preferred screen distance and vertical post mount points (from 720 – 1240mm wide) allows width required for universal compatibility for racing/flight cockpits and commercial applications
2. Post anodised carbon grey aluminium profile with premium powder-coated carbon steel components offers strength for up to 65” screens
3. 600mm of Vertical Adjustment for that perfect monitor placement
4. Universal VESA mounting plate included for maximum compatibility and flexibility (• 200x200mm • 100x200mm • 200x100mm • 150x150mm • 100x100mm • 75x75mm)
5. Custom NLR 100 x 40mm post anodized aluminium profile base

• Eight Integrated Haptic Motors: Seamlessly built into the seat for powerful, low-latency (75 FPS) positional feedback without compromising comfort.
• Equipped with HF8 Pro Technology: High-torque haptic motors deliver 200% more torque and 60% faster motor speed (400% more power) than the original HF8.
• Next Level Racing® HFS Software: Customise eight individual feedback zones for a fully immersive experience across racing and flight titles.
• ERS3 Endurance Design: SIMAERO Mesh fabric ensures maximum breathability and cooling comfort for long sessions.
• Ergonomic Racing Form: Cold-moulded foam, dual recliners, and precision lumbar support for users of all sizes.
• Universal Compatibility: Bottom-mount design fits most cockpits on the market; extra mount positions available with Next Level Racing® Universal Seat Brackets.

1. Ergonomically designed and engineered specifically for sim racing
2. Compatible with all side mounting seat brackets
3. Five-axis Rotationally molded polymer seat for ultimate tensile strength
4. PU molded Foam with premium suede finish
5. Next Level Racing seat belts included for increased immersion and motion users
6. Comfortably fit users up to 42” waist and built rigid to support up to 250 kg users

• FIA Licensed Excellence: Official FIA Licensed Product, meeting the highest standards of motorsport simulation equipment.
• Racing Seat Immersion: A more fitted solution, replicating a racing seat for users seeking heightened immersion.
• Durable Recliner Mechanism: Enhanced strength and stability with a robust double recliner mechanism.
• Premium PU Leather & Suede Finish: Combines luxury and durability for a sleek, professional look.
• Built for Precision and Comfort: Engineered for durability and ergonomic support during intense use.

• Eight Integrated Haptic Motors: Seamlessly built into the seat for powerful, low-latency (75 FPS) positional feedback without compromising comfort.
• Equipped with HF8 Pro Technology: High-torque haptic motors deliver 200% more torque and 60% faster motor speed (400% more power) than the original HF8.
• Next Level Racing® HFS Software: Customise eight individual feedback zones for a fully immersive experience across racing and flight titles.
• True Bucket-Style Design: Contoured for stability and body support through corners and heavy braking.
• Side-Mount Ready: Compatible with industry-standard seat brackets for easy attachment. 
• Durable Racing suede Fabric: Hard-wearing, PU molded foam racing suede fabric offers firm body support, reduced slippage, and comfort through long sessions.

• FIA Licensed Excellence: Official FIA Licensed Product, meeting the highest standards of motorsport simulation equipment.
• Durable Recliner Mechanism: Enhanced strength and stability with a robust double recliner mechanism.
• Breathable SIMAERO Mesh Fabric: Superior airflow and comfort during extended racing sessions.
• Ergonomic and Versatile Design: Suitable for GT racing, truck driving, and farming simulations.
• Built for Long Sessions: Engineered for durability and support, perfect for intense use.

• 4x mag mounts
• 4x M6x 20 mm cylinder head screws black
• 4x M6 washers
• Any controllers and accessories shown are NOT included!

• Compatible with the Next Level Racing® Elite Cockpits and other aluminum profile cockpits
• Turn your Elite racing cockpit and other aluminium cockpits into a flight cockpit
• Suited for combat, commercial, general aviation, and space flight enthusiasts.
• Included Center pole HOTAS joystick mounting arm
• Compatible with a wide range of flight electronics from Thrustmaster, Logitech, Winwing, VPC, Honeycomb
• Included Elite Spacer Plate allows for a wide range of clamp-on flight electronics
• Wide range of lateral and vertical adjustment for a more tailored flight experience

• Immersive Bucket Seat Feel – Experience the locked-in sensation of a true racing bucket seat while having the adjustment and comfort of a reclining seat. 
• Supportive Fit for Serious Racers – Designed to comfortably accommodate users up to a 38” waist.
• Industry-First Adjustable Lumbar Support – Custom-tune your lower-back comfort with the first integrated lumbar system designed specifically for sim racing—quick to adjust and built for long sessions.
• Smooth Double Reclining Mechanism – Dual recliners offer precise seat angle adjustment while maintaining strength and stability under load.
• Dual Seat Sliders – Easily slide forward or back to find the perfect position—ideal for shared setups or fine-tuning your racing posture.
• Breathable Performance Mesh – High-quality mesh fabric keeps you cool and focused during intense races with enhanced airflow.
• Broad Compatibility – Works seamlessly with Next Level Racing® Elite cockpits, and other third-party bottom-mounted cockpits.

• Next Level Racing® PRS1 Performance Reclining Seat
• Digital assembly instructions and assembly videos are available here: https://bit.ly/nlr-instructions 

• Supported height: 120cm – 210cm or 3'9" – 6'9"
• Supported max weight: 150kg or 331 lbs.
• Supported waist size: Up to 38’ waist
• Product dimensions: (L) 63 cm x (W) 49 cm or (H) 95 cm /(L) 24.8 inches x W 19.3 inches x H 19.7 inches)  
• Box dimensions: 101 cm (L) X 56 cm (W) X 32.5 cm (H)/ 39.8 inches(L) x 22 inches (W) x 12.8 inches(H) 
• Product weight: 17.8 kg or 39.2 lbs.
• Boxed weight – 22.5 kg or 49.6 lbs.
• Part number – NLR-E057

• Next Level Racin® Elite Series cockpit
• Next Level Racing® Frame only cockpits 
• Third Party Racing Cockpits- Please ensure you are measuring the mounting point on your cockpit.