Next Level Racing FGT Formula and GT Simulator Cockpit

Force2Motion adapter system Motion Platform Plus - extension carrier (top)

The upper frame (F2M adapter system Motion Platform Plus extension carrier) is used to accommodate the Wheel Stands of the NLR GTTrack Cockpit or the NLR Wheel Stand DD or the NLR Wheel Stand 2.0 and, together with a V3, to form the cockpit, which can then be equipped with one or two Motion Platform Plus. If this construct is to be mounted on a Traction Plus, you will also need the F2M base support.

And the upper frame can also (alone - without the lower carrier) "transport" the NLR FGT cockpit (with and without NLR seat) to a Motion Cockpit. Here you can integrate one or two Motion Platform Plus and operate the whole thing "solo" with the original floor supports from NLR. And you can even strap the system onto a Traction Plus system. Pretty crazy, but it works.

The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.

The extension carrier (top) is needed for the following cockpits and motion platforms:

•  NLR GTTrack Wheel Stand on Traction Plus (base adapter required)
•  NLR Wheel Stand DD on Traction Plus (base adapter required)
•  NLR Wheel Stand DD without Traction Plus
•  NLR Wheel Stand 2.0 on Traction Plus (basic adapter required)
•  NLR Wheel Stand 2.0 without Traction Plus
•  NLR FGT Cockpit on Traction Plus (base adapter required)
•  NLR FGT Cockpit without Traction Plus

Scope of delivery:

• 2x side member with holes in specified colour
• 4x end plugs in black plastic
• 2x cross member top/outside with thread at the head sides
• 2x upper cross member for upper floor panel
• 2x top floor panel as step protection, bracing and mounting for various cockpits
• 1x top cross member for mounting rocker (original pivot bar when mounting only one Motion Plus platform)
• Slot nuts, screws, nuts and washers
• Instructions in German (English in preparation)

Dimensions: approx. 1370mm x 575mm x 60mm
Net weight: approx. 11 kg

Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. Manual skills and tools (including a ratchet set, Allen key, open-ended spanner set) are required for assembly. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!

Please note:

• Motion platforms, Traction Plus, V3 etc and cockpits not included. The article presented here only contains the parts described under "Scope of delivery".
• When mounting the system on an NLR Traction Plus system, please note the maximum payload of 235 kg (incl. driver)!
• There are various options for this article, which are shown in the compatibility matrix.

Attention: Once again, because it is so important: The maximum payload of the Traction Plus System is 235 kg including all components mounted on it such as Motion Platform V3, Motion Platform Plus, cockpits and controls and of course the driver himself. This weight must not be exceeded, otherwise the warranty for the Traction Plus system will be voided!
 

Force2Motion Adapter-System Motion Platform Plus - Additional Floor Plate Set Top

If the NLR-FGT-Cockpit (not FGT-ELITE) is used, an additional floor plate with stiffening profile is required. If only one Motion-Plus-Platform is used with the FGT-Cockpit, an 80x40 height compensation profile is required (see separate article).

The complete description of the product incl. all possible combinations and the restrictions regarding the weight when using a Traction Plus System can be found in the following PDF.

Force2Motion Adapter System Motion Platform Plus - Additional Bracing Rocker Top FGT

When mounting only one Motion Platform Plus in combination with the NLR FGT cockpit, an additional stiffening profile is required for height compensation.

The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.

Scope of delivery:

• Crossbar 80x40 for rocker Powder coating black fine structure
• 4x angle pieces for fastening Powder coating black fine structure
• 2x plugs 80x40
• Slot nuts, screws, nuts and washers
• Instructions in German (English in preparation)

Dimensions: approx. 80mm x 560mm x 120mm
Net weight: approx. 3,5 kg

The profile is only available in black powder coated.

 

Force2Motion Motion Platform Plus Adapter System - Base Support (bottom)

With the F2M adapter system Motion Platform Plus it is possible to mount one or two Motion Platform Plus on the Traction Plus. Depending on the rider's weight (75-100 kg) and the mounted cockpit, an additional V3 can then be inserted into the cockpit.
 
The system consists of a lower (mandatory) and upper (optional) carrier system. Depending on the cockpit used, the upper carrier may or may not be required. The lower carrier is called the basic set and contains the floor plates 150mm and two cross members with bracing plates for Traction-Plus mounting. These parts are not or only partially needed for the upper beam (extension set), as the Motion-Plus platforms are located at this point. The upper support can also be used on its own to extend the Wheel Stands DD and 2.0 with one or two Motion-Plus platforms and a V3 to a Motion Cockpit.

The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.

The basic carrier (below) is required for the following cockpits and motion platforms:

• NLR GT Elite Cockpit on Traction Plus (with Next Level Racing® GTElite Motion Adaptor Upgrade Kit).
• NLR FGT Elite Cockpit on Traction Plus
• NLR GTTrack Cockpit on Traction Plus
• NLR GTTrack Wheel Stand on Traction Plus (extension bracket required)
• NLR Wheel Stand 2.0 on Traction Plus (extension carrier required)
• NLR FGT Cockpit on Traction Plus (extension carrier required)
• NLR FGT Cockpit on Traction Plus (only extension carrier required - you do need the base support (bootom) for this!)
• Custom-built cockpits and third-party cockpits with Motion Plus on Traction Plus (Please enquire and seek advice individually!).

Next Level Racing Lockable Castor Wheels
 
Leading Features

• Turn your F-GT, FGT-Elite or Challenger into mobile cockpits
• Roll your cockpit around with ease and simply lock the wheels when racing

Next Level Racing® Floor Mat 

Perfect finish to your stand or cockpit whilst protecting your floor at the same time

 Attention: Not suitable for soft wooden floors or laminate (risk of scratching).

Next Level Racing® Free Standing Triple Monitor Stand

The Next Level Racing® Free Standing Triple Monitor Stand finishes off your racing simulator setup to give ultimate immersion to race like a professional. The stand supports triple screens from 32 - 65” allowing up to a huge 195” of peripheral vision for incredible realism. The stand includes both lockable wheels for easy movement and height adjustable feet, the choice is yours. The design is based on customer feedback allowing you to have your screens in the perfect position of your choice whether that is directly behind the wheel or further back from your cockpit and allowing you to change the position of the screens easily and quickly. Being completely free standing and with lockable wheels it also makes it the perfect monitor stand for events, trade shows and sim racing centers.

Leading Features

• Solid and rigid design that supports 3 x 32- 65” monitors
• Universally designed VESA mounting range to allow support for largest range of TV sizes
• Wider design allows the monitor to be placed directly behind the wheel or further away if preferred
• Lockable Castor Wheels allow portability as well as quick and easy angle adjustment of outer screens
• All forms of adjustment including angle, tilt and height

NOT RECOMMENDED for FGT and GT-Elite series or when using the Traction Plus system as the distance between the feet is too small.

Next Level Racing Free Standing Single Monitor Stand

Please mind the tripple monitor stand as an alternative for some bucks more...

The Next Level Racing® Free Standing Monitor Stand finishes off your racing simulator setup to give the ultimate immersion to race like a professional supporting screens from 24”- 85”. The stand includes both lockable wheels for easy movement and height adjustable feet, the choice is yours. The design is based on customer feedback allowing you to have your screens in the perfect position of your choice whether that is directly behind the wheel or further back from your cockpit and allowing you to change the position of the screen easily and quickly. Being completely free standing and with lockable wheels it also makes it the perfect monitor stand for events, trade shows and sim racing centres.

Leading Features:

• Solid and rigid design that Supports 24”- 85” monitors
• Universally designed VESA mounting range to allow support for largest range of TV sizes
• Wider design allows the monitor to be placed directly behind the wheel or further away if preferred
• Lockable wheel castors allow portability as well as quick and easy adjustment
• All forms of adjustment including angle, tilt and height

NOT RECOMMENDED for FGT and GT-Elite series or when using the Traction Plus system as the distance between the feet is too small.

Next Level Racing FGT Monitor Stand

Monitor Stand to go with your Next Level Racing FGT Simulator Cockpit.

• Can support up to 1x 65" Screen or 3x 27" screens
• Compatible with the Next Level Racing FGT Simulator Cockpit
• Product Weight: 9 kg or 20 lbs
• Boxed Dimensions: 76 x 15 x 8 cm or 30 x 6 x 3 inches
• Boxed Weight: 12 kg or 26 lbs Please note: Not compatible with the Next Level Racing GT Ultimate V2 Cockpit

Force2Motion Motion Platform Plus adapter system - Motion Plus extension base support

With the basic carrier Motion Plus extension, the F2M adapter system Motion Platform Plus can be extended so that a second Motion Platform Plus can be used and mounted on the Traction Plus. Depending on the rider's weight (75-100 kg) and the mounted cockpit, an additional V3 can then be inserted into the cockpit.
 
The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.

Scope of delivery:

• 1x Motion Plus cross member (for mounting a second Motion Plus platform) according to the selected colour or coating.
• 2x corner plates powder coating black fine structure
• Slot nuts, screws, nuts and washers
• Instructions in German (English in preparation)

Dimensions: approx. 105mm x 575mm x 60mm

Net weight: approx. 1,4 kg

Delivery times:
 
Delivery time for stock items (inventory items) is usually 2-5 days from receipt of order and payment. Combinations that are not in stock or are explicitly made due to a special colour request usually require 4-6 weeks delivery time.

Force2Motion adapter system Motion Platform Plus - extension carrier (top)

The upper frame (F2M adapter system Motion Platform Plus extension carrier) is used to accommodate the Wheel Stands of the NLR GTTrack Cockpit or the NLR Wheel Stand DD or the NLR Wheel Stand 2.0 and, together with a V3, to form the cockpit, which can then be equipped with one or two Motion Platform Plus. If this construct is to be mounted on a Traction Plus, you will also need the F2M base support.

And the upper frame can also (alone - without the lower carrier) "transport" the NLR FGT cockpit (with and without NLR seat) to a Motion Cockpit. Here you can integrate one or two Motion Platform Plus and operate the whole thing "solo" with the original floor supports from NLR. And you can even strap the system onto a Traction Plus system. Pretty crazy, but it works.

The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.

The extension carrier (top) is needed for the following cockpits and motion platforms:

•  NLR GTTrack Wheel Stand on Traction Plus (base adapter required)
•  NLR Wheel Stand DD on Traction Plus (base adapter required)
•  NLR Wheel Stand DD without Traction Plus
•  NLR Wheel Stand 2.0 on Traction Plus (basic adapter required)
•  NLR Wheel Stand 2.0 without Traction Plus
•  NLR FGT Cockpit on Traction Plus (base adapter required)
•  NLR FGT Cockpit without Traction Plus

Scope of delivery:

• 2x side member with holes in specified colour
• 4x end plugs in black plastic
• 2x cross member top/outside with thread at the head sides
• 2x upper cross member for upper floor panel
• 2x top floor panel as step protection, bracing and mounting for various cockpits
• 1x top cross member for mounting rocker (original pivot bar when mounting only one Motion Plus platform)
• Slot nuts, screws, nuts and washers
• Instructions in German (English in preparation)

Dimensions: approx. 1370mm x 575mm x 60mm
Net weight: approx. 11 kg

Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. Manual skills and tools (including a ratchet set, Allen key, open-ended spanner set) are required for assembly. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!

Please note:

• Motion platforms, Traction Plus, V3 etc and cockpits not included. The article presented here only contains the parts described under "Scope of delivery".
• When mounting the system on an NLR Traction Plus system, please note the maximum payload of 235 kg (incl. driver)!
• There are various options for this article, which are shown in the compatibility matrix.

Attention: Once again, because it is so important: The maximum payload of the Traction Plus System is 235 kg including all components mounted on it such as Motion Platform V3, Motion Platform Plus, cockpits and controls and of course the driver himself. This weight must not be exceeded, otherwise the warranty for the Traction Plus system will be voided!
 

Next Level Combat Flight Pack – Converts your Next Level Racing® F-GT or GTtrack cockpit into a flight simulator cockpit
 
Transform your F-GT or GTtrack Simulator Cockpit into the ultimate flight simulator. Mount your flight joystick and throttle on either side of your seat or center mount your joystick.

Next Level Racing ERS3 HYPERCOOL Ventilated Sim Racing Seat (Fabric & Mesh)

Fast Facts

• 6-Zone Active Cooling: Integrated high-performance fans (3 in seat base, 3 in backrest) deliver targeted airflow for maximum cooling during extended sessions.
• All-in-One Ventilated Design: Factory-finished and fully integrated with internal electronics and dual fan speed settings—no DIY required.
• Premium SIMAERO Mesh Upholstery: Breathable, racing-grade fabric enhances airflow and comfort to reduce heat build-up.
• Dual Recliner Mechanism: Patent-pending double locking recliners ensure quick angle adjustment and superior rigidity under load.
• Pre-Installed Dual Seat Sliders: Allows fast forward/backward adjustment—perfect for shared rigs or commercial setups.
• Ergonomic Fit for All Racers: Designed to support a wide range of body types, from casual players to competitive sim racers.
• Official FIA Licensed Product- Official FIA Licensed Product developed to meet the highest standards of sim racing.

About

We’ve heard you sim racers, no more sweating in your seats! Introducing the Next Level Racing® ERS3 Hypercool — the first reclining sim racing seat with a fully integrated active cooling system. Featuring six internal cooling fans embedded within the seat and backrest, the ERS3 Hypercool is engineered to keep racers cool and focused during long, intense sessions. This complete plug-and-play solution offers two selectable fan settings and delivers a perfect balance of comfort, performance, and clean design. Built with premium SIMAERO Mesh fabric, cold-molded foam, and patent-pending dual recliner levers for added strength and adjustability, the ERS3 Hypercool empowers sim racers to race harder and longer — without compromising comfort or endurance. 

Video: https://youtu.be/WJbwtydruSc 

 

Next Level Racing Free Standing Single Monitor Stand

Please mind the tripple monitor stand as an alternative for some bucks more...

The Next Level Racing® Free Standing Monitor Stand finishes off your racing simulator setup to give the ultimate immersion to race like a professional supporting screens from 24”- 85”. The stand includes both lockable wheels for easy movement and height adjustable feet, the choice is yours. The design is based on customer feedback allowing you to have your screens in the perfect position of your choice whether that is directly behind the wheel or further back from your cockpit and allowing you to change the position of the screen easily and quickly. Being completely free standing and with lockable wheels it also makes it the perfect monitor stand for events, trade shows and sim racing centres.

Leading Features:

• Solid and rigid design that Supports 24”- 85” monitors
• Universally designed VESA mounting range to allow support for largest range of TV sizes
• Wider design allows the monitor to be placed directly behind the wheel or further away if preferred
• Lockable wheel castors allow portability as well as quick and easy adjustment
• All forms of adjustment including angle, tilt and height

NOT RECOMMENDED for FGT and GT-Elite series or when using the Traction Plus system as the distance between the feet is too small.

Next Level Racing FGT Monitor Stand

Monitor Stand to go with your Next Level Racing FGT Simulator Cockpit.

• Can support up to 1x 65" Screen or 3x 27" screens
• Compatible with the Next Level Racing FGT Simulator Cockpit
• Product Weight: 9 kg or 20 lbs
• Boxed Dimensions: 76 x 15 x 8 cm or 30 x 6 x 3 inches
• Boxed Weight: 12 kg or 26 lbs Please note: Not compatible with the Next Level Racing GT Ultimate V2 Cockpit

Force2Motion Adapter System Motion Platform Plus - Additional Bracing Rocker Top FGT

When mounting only one Motion Platform Plus in combination with the NLR FGT cockpit, an additional stiffening profile is required for height compensation.

The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.

Scope of delivery:

• Crossbar 80x40 for rocker Powder coating black fine structure
• 4x angle pieces for fastening Powder coating black fine structure
• 2x plugs 80x40
• Slot nuts, screws, nuts and washers
• Instructions in German (English in preparation)

Dimensions: approx. 80mm x 560mm x 120mm
Net weight: approx. 3,5 kg

The profile is only available in black powder coated.

 

Force2Motion Adapter-System Motion Platform Plus - Additional Floor Plate Set Top

If the NLR-FGT-Cockpit (not FGT-ELITE) is used, an additional floor plate with stiffening profile is required. If only one Motion-Plus-Platform is used with the FGT-Cockpit, an 80x40 height compensation profile is required (see separate article).

The complete description of the product incl. all possible combinations and the restrictions regarding the weight when using a Traction Plus System can be found in the following PDF.

Force2Motion Motion Platform Plus Adapter System - Base Support (bottom)

With the F2M adapter system Motion Platform Plus it is possible to mount one or two Motion Platform Plus on the Traction Plus. Depending on the rider's weight (75-100 kg) and the mounted cockpit, an additional V3 can then be inserted into the cockpit.
 
The system consists of a lower (mandatory) and upper (optional) carrier system. Depending on the cockpit used, the upper carrier may or may not be required. The lower carrier is called the basic set and contains the floor plates 150mm and two cross members with bracing plates for Traction-Plus mounting. These parts are not or only partially needed for the upper beam (extension set), as the Motion-Plus platforms are located at this point. The upper support can also be used on its own to extend the Wheel Stands DD and 2.0 with one or two Motion-Plus platforms and a V3 to a Motion Cockpit.

The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.

The basic carrier (below) is required for the following cockpits and motion platforms:

• NLR GT Elite Cockpit on Traction Plus (with Next Level Racing® GTElite Motion Adaptor Upgrade Kit).
• NLR FGT Elite Cockpit on Traction Plus
• NLR GTTrack Cockpit on Traction Plus
• NLR GTTrack Wheel Stand on Traction Plus (extension bracket required)
• NLR Wheel Stand 2.0 on Traction Plus (extension carrier required)
• NLR FGT Cockpit on Traction Plus (extension carrier required)
• NLR FGT Cockpit on Traction Plus (only extension carrier required - you do need the base support (bootom) for this!)
• Custom-built cockpits and third-party cockpits with Motion Plus on Traction Plus (Please enquire and seek advice individually!).

Force2Motion Motion Platform Plus adapter system - Motion Plus extension base support

With the basic carrier Motion Plus extension, the F2M adapter system Motion Platform Plus can be extended so that a second Motion Platform Plus can be used and mounted on the Traction Plus. Depending on the rider's weight (75-100 kg) and the mounted cockpit, an additional V3 can then be inserted into the cockpit.
 
The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.

Scope of delivery:

• 1x Motion Plus cross member (for mounting a second Motion Plus platform) according to the selected colour or coating.
• 2x corner plates powder coating black fine structure
• Slot nuts, screws, nuts and washers
• Instructions in German (English in preparation)

Dimensions: approx. 105mm x 575mm x 60mm

Net weight: approx. 1,4 kg

Delivery times:
 
Delivery time for stock items (inventory items) is usually 2-5 days from receipt of order and payment. Combinations that are not in stock or are explicitly made due to a special colour request usually require 4-6 weeks delivery time.

Next Level Racing ERS5 Elite Reclining Seat- PU Leather - Suede Edition

Leading Features:

• FIA Licensed Excellence: Official FIA Licensed Product, meeting the highest standards of motorsport simulation equipment.
• Racing Seat Immersion: A more fitted solution, replicating a racing seat for users seeking heightened immersion.
• Durable Recliner Mechanism: Enhanced strength and stability with a robust double recliner mechanism.
• Premium PU Leather & Suede Finish: Combines luxury and durability for a sleek, professional look.
• Built for Precision and Comfort: Engineered for durability and ergonomic support during intense use.

About:

Experience ultimate immersion with the Next Level Racing® ERS5 Elite Reclining Seat - PU Leather & Suede Edition, an FIA Official Licensed Product designed for sim racers who demand a racing seat that replicates the feel of real motorsport. Its fitted design provides a snug and immersive experience, perfect for users seeking to elevate their sim racing setup to a professional standard.

The ERS5 features a luxurious combination of PU leather and suede, offering both durability and style. Its robust double recliner mechanism ensures stability, even during high-intensity racing sessions with heavy load cell pedals. Developed in collaboration with the FIA, this seat aligns with global efforts to advance esports and motorsport talent development. Whether you’re racing in GT mode or another simulation, the ERS5 Elite Reclining Seat ensures an unparalleled level of comfort and immersion.
   
Product Video: https://youtu.be/8N01dXB38v0
 

Next Level Racing® ES2 Elite Sim Racing Seat 

Leading Features:

• Industry First Premium Hydro-Dip Carbon Finish – Delivers a sleek, high-end look that sets it apart from standard racing seats.
• FIA Official Licensed Product – Meets the highest standards of motorsport simulation authenticity.
• Hybrid Comfort Design – Ideal balance of support and cushioning for both endurance and sprint racing.
• Wide Fit with Enhanced Shoulder Support – Accommodates users up to a 42” waist with a secure, ergonomic feel.
• Integrated Leg and Lumbar Support – Provides improved pedal control and posture for long sessions.

About:

The Next Level Racing® ES2 Elite Sim Racing Seat is an FIA Official Licensed Product, purpose-built for sim racers who demand a seat that looks as good as it performs. At the heart of the ES2’s premium appeal is its durable fibreglass shell, featuring an industry-first hydro-dip carbon finish—offering a sleek, motorsport-inspired aesthetic that highlights any sim racing cockpit. With a wide, body-hugging profile that supports users up to a 42” waist, and ergonomic enhancements for long-session comfort, the ES2 strikes the perfect balance between immersion, durability, and professional-grade style.

**Seats are designed for simulators and esports, not for road use or in vehicle.
 
Produckt Video: https://youtu.be/ydAmWNaNjHE 

Designed to stand out:

The hydro-dip carbon finish of the ES2 isn’t just a detail—it’s a statement. Industry first, sleek, modern, and motorsport-inspired, it gives the seat a high-end aesthetic that commands attention. Wrapped around a durable fibreglass shell, this finish delivers both strength and style, making the ES2 as visually impressive as it is performance ready.

Built for comfort and control:

With a wide bucket seat shape and generous shoulder support, the ES2 offers a versatile fit for a range of sim racers, up to a 42” waist. Its hybrid design introduces more comfort compared to the firmer ES1, making it perfect for GT, drift, touring, club, track and rally disciplines. The integrated leg bolsters enhance lower-body stability for better pedal control, while high-density foam and PU leather/suede cushions ensure all-day racing comfort.

Ready for the Elite SimRacer:

As an FIA Official Licensed Product, the ES2 is made for racers who want realism without compromise. Designed to integrate seamlessly with the Next Level Racing® Elite Series cockpits and compatible with a wide range of side-mount cockpit setups, the ES2 is the perfect upgrade for those demanding true-to-life performance and immersive design.



 

Next Level Racing® Free Standing Triple Monitor Stand

The Next Level Racing® Free Standing Triple Monitor Stand finishes off your racing simulator setup to give ultimate immersion to race like a professional. The stand supports triple screens from 32 - 65” allowing up to a huge 195” of peripheral vision for incredible realism. The stand includes both lockable wheels for easy movement and height adjustable feet, the choice is yours. The design is based on customer feedback allowing you to have your screens in the perfect position of your choice whether that is directly behind the wheel or further back from your cockpit and allowing you to change the position of the screens easily and quickly. Being completely free standing and with lockable wheels it also makes it the perfect monitor stand for events, trade shows and sim racing centers.

Leading Features

• Solid and rigid design that supports 3 x 32- 65” monitors
• Universally designed VESA mounting range to allow support for largest range of TV sizes
• Wider design allows the monitor to be placed directly behind the wheel or further away if preferred
• Lockable Castor Wheels allow portability as well as quick and easy angle adjustment of outer screens
• All forms of adjustment including angle, tilt and height

NOT RECOMMENDED for FGT and GT-Elite series or when using the Traction Plus system as the distance between the feet is too small.

Next Level Racing® Free Standing Keyboard and Mouse Stand – Compatible with all racing cockpits and wheel stands
 

• The Next Level Racing® Free Standing Keyboard and Mouse Stand is free standing so it can be positioned to your preference and also making it compatible with any wheel stand or cockpit.
• Allows easy access to keyboard and mouse when required
• Includes Next Level Racing® Keyboard and Mouse Mats Height Adjustable feet, Instructions for assembly

Force2Motion Racing Seat Racer Black-Velours

Fast Facts:

• Force2Motion Racer - XL seat with “Halo” for motorsport enthusiasts and sim racing.
• Designed for drivers weighing 90 kg - 110 kg and 170-195 cm tall.
• Available in black color and with 3D MESH “breathable” padding
• With Force2Motion logo

About:

The Force2Motion racing seat Racer Black-Velours is a high-quality yet affordable hard shell seat for sim racing.

Its non-slip material offers optimum support and the density of the seat foam lets you feel the movements of the simulator. The RTM technology (Resin Transfer Molding) reduces the weight and increases the stiffness. This innovative production method is able to create a lighter and stronger fiberglass bucket seat shell, which guarantees a weight reduction of 30% compared to standard seats! Very good workmanship and guaranteed rigidity. The M8 side connections are spaced 290 mm apart.

Dimensions: see photos

Scope of delivery:

• Seat
• 4x screws

Specifications:

• 5 passages for the seat belt (not included)
• Side brackets (not included)
• Back made of black waxed fiber
• Removable Velcro® cushions: Back, seat, legs
• 4 screws included
• Product weight: 10.66 kg
• Black velour
• Designed for riders from 90-110 kg and a height of 170-195 cm.
• Center distance side to side: 430 mm
• ONLY for simracing - no road or FIA approval!

Next Level Racing® ERS3 Haptic Feedback Sim Racing Seat 

Leading Features

• Eight Integrated Haptic Motors: Seamlessly built into the seat for powerful, low-latency (75 FPS) positional feedback without compromising comfort.
• Equipped with HF8 Pro Technology: High-torque haptic motors deliver 200% more torque and 60% faster motor speed (400% more power) than the original HF8.
• Next Level Racing® HFS Software: Customise eight individual feedback zones for a fully immersive experience across racing and flight titles.
• ERS3 Endurance Design: SIMAERO Mesh fabric ensures maximum breathability and cooling comfort for long sessions.
• Ergonomic Racing Form: Cold-moulded foam, dual recliners, and precision lumbar support for users of all sizes.
• Universal Compatibility: Bottom-mount design fits most cockpits on the market; extra mount positions available with Next Level Racing® Universal Seat Brackets.

About

The Next Level Racing® ERS3 Haptic Feedback Sim Racing Seat combines two of the most acclaimed innovations in simulation — the comfort and ergonomics of the ERS3 Elite Seat and the haptic performance of the HF8 Pro. Developed from global community feedback, it represents the most accessible and affordable way to experience true integrated haptic feedback in a professional-grade seat.
“The next level of realism the Haptic Seats gives you is amazing. I particularly love the feelings through the gear shifts, ripple-strips and loss of traction. Makes it much easier to judge.” Alex Gardner, Professional Race Car Driver

Featuring the same advanced haptic technology as the HF8 Pro, the Next Level Racing® ERS3 Haptic delivers 200% more torque, 400% more power, and 60% faster motor speed than the original HF8 Haptic Feedback Pad. The eight embedded haptic motors are fully integrated into the seat frame, translating every corner, surface texture, and impact into detailed, real-time sensation while delivering direct and evenly distributed feedback. Built with SIMAERO Mesh fabric and cold-moulded foam, the ERS3 Haptic maintains the ERS3’s renowned comfort and posture support, making it ideal for long endurance sessions for sim racers and pilots alike.

Introducing the ERS3 and ES1 Haptic Sim Racing Seats

Video: https://youtu.be/j2qtTMFzYjE

Integrated Power and Comfort

Unlike traditional haptic pads, the ERS3 Haptic houses its motors within the seat structure for unmatched tactile precision and comfort. This fully integrated design eliminates shifting or vibration loss, ensuring every sensation — from tyre slip to turbulence — is transmitted directly through the seat. The SIMAERO Mesh fabric keeps you cool under pressure, while high-density foam maintains support through every lap, flight, or mission. Designed to accommodate larger body types and extended sessions, the ERS3 Haptic balances performance, strength, and ergonomic comfort for every user.

Customised Haptic Control

With full support for Next Level Racing® HFS software and SimHub integration, users can fine-tune each of the eight feedback zones to match their preferences. Control the strength and trigger behaviour of each motor — whether simulating engine RPM, road texture, braking, or turbulence. The HFS software runs at 75 frames per second for ultra-low latency feedback, while a built-in physical controller allows on-the-fly intensity adjustment with LED indicators for quick reference. For console* use, the 3.5 mm audio input transforms in-game sound into vibration feedback for racing, flight, or even music and VR experiences.
*Note: When using on console, haptic feedback is generated through audio-based vibration only. Individual motor control and telemetry-based effects are ONLY available on PC via HFS Software or SimHub.
 

Next Level Racing ERS4 Elite Reclining Seat- PU Leather - Suede Edition

Leading Features:

• FIA Licensed Excellence: Official FIA Licensed Product, meeting the highest standards of motorsport simulation equipment.
• Durable Recliner Mechanism: Enhanced strength and stability with a robust double recliner mechanism.
• Premium PU Leather & Suede Finish: Combines luxury and durability for a sleek, professional look
• Ergonomic and Versatile Design: Suitable for GT racing, truck driving, and farming simulations.
• Built for Long Sessions: Engineered for durability and support, perfect for intense use.

About:

Take your sim racing setup to the next level with the Next Level Racing® ERS4 Elite Reclining Seat - PU Leather & Suede Edition, an FIA Official Licensed Product designed to meet the highest standards of motorsport simulation. Developed in collaboration with the FIA as a licensed product, this seat supports the global initiative to advance esports and motorsport talent development, combining premium materials with professional-grade performance.

The luxurious combination of PU leather and suede not only enhances style but also provides a durable and comfortable seating experience during extended sessions. Built for endurance, the ERS4 features a durable double recliner mechanism for added strength and adaptability, making it perfect for high-intensity racing with heavy load cell pedals. Its ergonomic design promotes excellent posture and lumbar support, making it ideal for racers seeking precision and comfort. Compatible with a wide range of cockpits, the ERS4 Elite Reclining Seat is the ultimate choice for sim racers looking for reliability, comfort, and performance.
      
Product Video: https://youtu.be/Yv3OqOxYMvg

NLR ES1 Haptic Feedback Sim Racing Seat

Leading Features

• Eight Integrated Haptic Motors: Seamlessly built into the seat for powerful, low-latency (75 FPS) positional feedback without compromising comfort.
• Equipped with HF8 Pro Technology: High-torque haptic motors deliver 200% more torque and 60% faster motor speed (400% more power) than the original HF8.
• Next Level Racing® HFS Software: Customise eight individual feedback zones for a fully immersive experience across racing and flight titles.
• True Bucket-Style Design: Contoured for stability and body support through corners and heavy braking.
• Side-Mount Ready: Compatible with industry-standard seat brackets for easy attachment. 
• Durable Racing suede Fabric: Hard-wearing, PU molded foam racing suede fabric offers firm body support, reduced slippage, and comfort through long sessions.

About

The Next Level Racing® ES1 Haptic Seat combines the acclaimed ES1 bucket-style design with the proven haptic technology of the HF8 Pro, delivering a fully integrated seat built for high-performance simulation. Featuring the same eight high-torque haptic motors found in the HF8 Pro — delivering 200% more torque, 400% more power, and 60% faster motor speed — the ES1 Haptic provides detailed, real-time feedback that transforms every gear shift, curb strike, and surface change into true-to-life sensation.
“The next level of realism the Haptic Seats gives you is amazing. I particularly love the feelings through the gear shifts, ripple-strips and loss of traction. Makes it much easier to judge.” Alex Gardner, Professional Race Car Driver

Each motor is embedded directly into the seat shell, ensuring balanced, low-latency feedback without vibration loss, while the durable racing suede fabric and cold-moulded foam offer long-lasting comfort and stability during endurance sessions. With side-mount compatibility for precise positioning and easy integration into professional cockpits, the ES1 Haptic combines precision, control, and immersion—defining a new standard for competitive sim racing.

Video: https://youtu.be/j2qtTMFzYjE 

Integrated Power and Comfort

Unlike traditional haptic pads, the ES1 Haptic integrates its eight high-torque motors directly into the bucket seat shell, delivering precise, low-latency feedback that follows every movement of the vehicle. This fully embedded design eliminates shifting or vibration loss, ensuring that every sensation — from tyre slip to kerb strike — is felt exactly where it happens. The durable racing suede fabric provides superior grip and comfort, while cold-moulded foam maintains firm support through long sessions. Designed for maximum body stability and endurance, the ES1 Haptic gives drivers the confidence and connection needed for competitive simulation.

Customised Haptic Control

With full support for Next Level Racing® HFS Software and SimHub integration, users can fine-tune all eight feedback zones for total control over their racing experience. Adjust motor strength, response, and trigger behaviour to replicate effects such as engine RPM, road texture, braking, and collisions. The HFS software runs at 75 frames per second, providing ultra-low latency and highly accurate feedback. A built-in physical controller allows quick intensity adjustments. For console* use, the 3.5 mm audio input converts in-game audio into dynamic vibration feedback for racing, flight, or multimedia experiences.
*Note: When using on console, haptic feedback is generated through audio-based vibration only. Individual motor control and telemetry-based effects are ONLY available on PC via HFS Software or SimHub.

Built to integrate and perform

The ES1 Haptic is designed for seamless integration with a wide range of professional simulator setups. Its side-mount compatibility allows precise positioning and angle adjustment with most industry-standard seat brackets, while the compact, lightweight design ensures easy installation across popular cockpits. The haptic system complements existing motion and tactile solutions, creating a unified feedback ecosystem for serious racers. With its rigid shell, ergonomic shape, and high-performance haptic technology, the ES1 Haptic delivers unmatched control, comfort, and immersion — built for the most demanding sim-racing environments.

 

Next Level Racing PRS2 Performance Reclining Sim Racing Seat
 
Leading Features

• Immersive Bucket Seat Feel – Experience the locked-in sensation of a true racing bucked seat while having the adjustment and comfort of a reclining seat.
• Comfort-Fit Design for Wider Range of Users – Designed to comfortably accommodate users up to a 40” waist, offering a supportive fit
• Industry-First Adjustable Lumbar Support – Custom-tune your lower-back comfort with the first integrated lumbar system designed specifically for sim racing—quick to adjust, fast to dial in, and tailored to each user.
• Smooth Double Reclining Mechanism – Dual recliners offer precise seat angle adjustment while maintaining strength and stability under load.
• Dual Seat Sliders – Easily slide forward or back to find the perfect position—ideal for shared setups or fine-tuning your racing posture.
• Breathable Performance Mesh – High-quality mesh fabric keeps you cool and focused during intense races with enhanced airflow.
• Broad Compatibility – Works seamlessly with Next Level Racing® Elite cockpits and other third-party bottom-mounted cockpits.

About

The Next Level Racing® PRS2 Elite Reclining Seat is designed for sim racers who demand the perfect blend of comfort, control, and adjustability. Taking design inspiration from the sculpted seats found in high-end supercars, the PRS2 combines the locked-in feel of a bucket seat with the adjustability of a reclining seat.

• ideal for long sessions and high-performance driving. With its comfort-fit structure
• engineered to support users up to a 40” waist
• the PRS2 delivers an ergonomic and immersive experience built for serious sim racers.

 
Product Video: https://youtu.be/-kcNkFrrE1k 

Compatible Next Level Racing products

• Next Level Racin® Elite Series cockpit
• Next Level Racing® Frame only cockpits 
• Third Party Racing Cockpits- Please ensure you are measuring the mounting point on your cockpit.

Instructional Video: https://youtu.be/eJsN5pyR0CE 


 

Next Level Racing PRS1 Performance Reclining Sim Racing Seat

Leading Features

• Immersive Bucket Seat Feel – Experience the locked-in sensation of a true racing bucket seat while having the adjustment and comfort of a reclining seat. 
• Supportive Fit for Serious Racers – Designed to comfortably accommodate users up to a 38” waist.
• Industry-First Adjustable Lumbar Support – Custom-tune your lower-back comfort with the first integrated lumbar system designed specifically for sim racing—quick to adjust and built for long sessions.
• Smooth Double Reclining Mechanism – Dual recliners offer precise seat angle adjustment while maintaining strength and stability under load.
• Dual Seat Sliders – Easily slide forward or back to find the perfect position—ideal for shared setups or fine-tuning your racing posture.
• Breathable Performance Mesh – High-quality mesh fabric keeps you cool and focused during intense races with enhanced airflow.
• Broad Compatibility – Works seamlessly with Next Level Racing® Elite cockpits, and other third-party bottom-mounted cockpits.

About

The Next Level Racing® PRS1 Performance Reclining Seat is engineered for sim racers who demand immersion, adjustability, and comfort in one refined package. Inspired by the sculpted seat design found in high-performance supercars, the PRS1 combines the secure feel of a motorsport bucket seat with the adjustability of reclining adjustability and all-day comfort. With its performance-ready fit—designed to comfortably support users up to a 38” waist—the PRS1 delivers the ideal balance of control and support for a wide range of racers. It’s the perfect upgrade for any serious sim racing setup.
 
Product Video: https://youtu.be/FJL3BbbEiSI 

Secure fit for maximum immersion

Crafted to closely mimic the feel of a real GT-style racing seat, the PRS1 delivers a confident, body-hugging fit that enhances your connection to the cockpit. Styled with contours and support lines similar to what you’d expect in premium supercar interiors, the PRS1 anchors you in place, allowing you to fully commit to every movement. Designed to suit users up to a 38” waist, the PRS1 accommodates a wide range of racers looking for precision and control.

Innovation in comfort

The PRS1 introduces sim racing’s first ever integrated lumbar support system—offering fast, on-the-fly adjustment to suit your unique seating preference. Whether you're dialling in more support for a long endurance session or backing it off for a casual drive, the lumbar system is engineered to deliver ergonomic comfort that adapts to you. It's a first-of-its-kind feature designed specifically to meet the evolving needs of sim racers.

Refined versatility for any cockpit

Adaptable and easy to integrate, the PRS1 is compatible with all Next Level Racing® cockpits including the Elite series aluminium cockpit and frame-only cockpits, as well as most third-party cockpits that support bottom-mounted seats*. The smooth double reclining mechanism and dual seat sliders offer extensive adjustability, allowing racers to find their perfect position with ease. Whether it’s a solo setup or part of a shared racing rig, the PRS1 offers the flexibility sim racers need without compromising performance.
* For third-party cockpit compatibility, please ensure you are measuring the mounting point on your cockpit. 

What's in the box

• Next Level Racing® PRS1 Performance Reclining Seat
• Digital assembly instructions and assembly videos are available here: https://bit.ly/nlr-instructions 

Specifications

• Supported height: 120cm – 210cm or 3'9" – 6'9"
• Supported max weight: 150kg or 331 lbs.
• Supported waist size: Up to 38’ waist
• Product dimensions: (L) 63 cm x (W) 49 cm or (H) 95 cm /(L) 24.8 inches x W 19.3 inches x H 19.7 inches)  
• Box dimensions: 101 cm (L) X 56 cm (W) X 32.5 cm (H)/ 39.8 inches(L) x 22 inches (W) x 12.8 inches(H) 
• Product weight: 17.8 kg or 39.2 lbs.
• Boxed weight – 22.5 kg or 49.6 lbs.
• Part number – NLR-E057

Compatible Next Level Racing products

• Next Level Racin® Elite Series cockpit
• Next Level Racing® Frame only cockpits 
• Third Party Racing Cockpits- Please ensure you are measuring the mounting point on your cockpit.

Instructional Video: https://youtu.be/eJsN5pyR0CE

Next Level Racing ERS4 Elite Sportsitz - Fabric - SIMAERO Mesh Edition

Leading Features:

• FIA Licensed Excellence: Official FIA Licensed Product, meeting the highest standards of motorsport simulation equipment.
• Durable Recliner Mechanism: Enhanced strength and stability with a robust double recliner mechanism.
• Breathable SIMAERO Mesh Fabric: Superior airflow and comfort during extended racing sessions.
• Ergonomic and Versatile Design: Suitable for GT racing, truck driving, and farming simulations.
• Built for Long Sessions: Engineered for durability and support, perfect for intense use.

About:

Take your sim racing setup to the next level with the Next Level Racing® ERS4 Elite Reclining Seat - Fabric & SIMAERO Mesh Edition, an FIA Official Licensed Product designed to meet the highest standards of motorsport simulation. Developed in collaboration with the FIA as a licensed product, this seat supports the global initiative to advance esports and motorsport talent development, combining premium quality with professional-grade performance.

The innovative SIMAERO Mesh fabric enhances airflow, ensuring a cool and breathable seating experience during long sessions. Built for endurance, the ERS4 features a durable double recliner mechanism for added strength and adaptability, making it perfect for high-intensity racing with heavy load cell pedals. Its ergonomic design promotes excellent posture and lumbar support, making it ideal for racers seeking precision and comfort. Compatible with a wide range of cockpits, the ERS4 Elite Reclining Seat is the ultimate choice for sim racers looking for reliability, comfort, and performance.
      
Product Video: https://youtu.be/Yv3OqOxYMvg

Next Level Racing ERS2 Reclining Seat

Fast Facts:

• designed and constructed with breathable racing suede fabric
• double locking seat recliner for maximum rigidity and angle adjustment
• compatible with Next Level Racing® Elite range of cockpits and GTTrack cockpit
• double locking seat sliders for maximum strength and fine adjustment
• suited for comfort and endurance racing
• universally designed to fit most bottom mounted aluminum cockpit chassis
• patent pending design introducing next level rigidity to reclining seats

About:

Introducing the Next Level Racing® ERS2 Elite Seat for the Elite sim racer. Fully compatible with the Next Level Racing® Elite series and the GTtrack cockpit, the user can directly attach their ERS2 Elite Seat to their cockpit in a matter of minutes. Constructed with breathable racing suede fabric, premium PU Leather, and a wide frame to suit a wide range of users. Patent pending design with the added double-seat recliner for maximum rigidity. Designed for the racing community, the ERS2 provides a motorsport seat design with an angle adjustment that will allow the user to get the exact desired position for long hours. The ERS2 Seat is designed and developed to be a premium product at an affordable price for the sim racing community.
 

Specificatons:
 

• Supported Height – 120 -210 cm or 4ft – 6ft 9 inches
• Supported Max Weight – 150 kg or 330 lbs
• Product Dimensions – 71 x 55 x 92 cm or 28 x 21.7 x 36 inches
• Product Weight – 13.5kg or 29.8 lbs
• Boxed Dimensions – 84.5 x 58 x 39.5 cm
• Boxed Weight – 18.7kg or 41.2 lbs
• Part Number – NLR-E045

 
What's in the box:
 

• Next Level Racing® ERS2 Seat
• Dual locking, quick adjustment seat slider
• Assembly Hardware
• Product manual
• Digital assembly instructions and assembly videos available here: https://bit.ly/nlr-instructions

Compatible Next Level Racing Products:

• Next Level Racing Elite Series cockpit
• Next Level Racing GTtrack

*For future cockpit compatibility, please make sure to check specific product on www.nextlevelracing.com 
 

Next Level Racing ERS5 Elite Sportsitz - Fabric - SIMAERO Mesh Edition

Leading Features:

• FIA Licensed Excellence: Official FIA Licensed Product, meeting the highest standards of motorsport simulation equipment.
• Racing Seat Immersion: A more fitted solution, replicating a racing seat for users seeking heightened immersion.
• Durable Recliner Mechanism: Enhanced strength and stability with a robust double recliner mechanism.
• Breathable SIMAERO Mesh Fabric: Superior airflow and comfort during extended racing sessions.
• Built for Precision and Comfort: Engineered for durability and ergonomic support during intense use.

About:

Experience ultimate immersion with the Next Level Racing® ERS5 Elite Reclining Seat - Fabric & SIMAERO Mesh Edition, an FIA Official Licensed Product designed for sim racers who demand a sim racing seat that replicates the feel of real motorsport. Its fitted design provides a snug and immersive experience, perfect for users seeking to elevate their sim racing setup to a professional standard.

The innovative SIMAERO Mesh fabric ensures exceptional airflow, keeping users cool and comfortable even during the most intense sessions. Built for endurance, the ERS5 features a durable double recliner mechanism for added strength and adaptability, making it perfect for high-intensity racing with heavy load cell pedals. Developed in collaboration with the FIA, this seat aligns with global efforts to advance esports and motorsport talent development. Whether you’re racing in GT mode or another simulation, the ERS5 Elite Reclining Seat delivers unparalleled comfort and immersion.
     
Product Video: https://youtu.be/8N01dXB38v0
 

Next Level Racing Motion Plus Platform (Cockpit-Mover)

Note: We have developed an adapter system to run two Motion Plus platforms plus a V3 on a Traction Plus system. Further information: https://www.force2motion.de/en/motion-the-beast/force2motion-adapter-system-motion-platform-plus/

All good things come in threes: With the new Motion Plus Platform, Next Level Racing is expanding the Motion Eco System of the Motion Platform V3 and the Traction Plus System with a third component. Now it is also possible with the Next Level Racing systems not only to tilt the seat (Seat Mover) or to move the cockpit sideways to simulate oversteer and understeer (Cockpit Slider or Mover), but also to raise the entire cockpit. In contrast to other concepts (such as our Beast), the lifting is not realised by individual actuators (such as those of ProSimu or the Qubic system) but by one or two integrated modules that are mounted under the cockpit. The Next Level Racing cockpits GTTrack, GT- or FGT-Elite and even the FGT cockpit are supported as standard (with adapters if necessary), which until now had to remain completely outside the scope of the motion upgrade. But we will also support cockpits from other manufacturers in the future.

Leading Features:

• Full Cockpit Mover, simulating vehicle chassis motion with ultimate precision and accuracy
• Market leading technology to feel bumps, corners, rolls, gear shifts and vibrations for peak immersion
• Quick and simple installation, compatible with the Next Level Racing cockpits
• Commercially bulit, but perfect for home use with its compact design and low noise opertaion
• Compatible with all major racing and flight games for PC (Windows)
• 1 Module for 2-DOF and **2 modules for 3-DOF
• Adaotbale to the existing Next Level Racing Motion Ecosystem to continue taking racing to the next level
• Unique pivot bar included for single unit use setups
• Advanced VR Compensation Software to experience smooth prcise VR movement
• Ultra-low latency provides sharp and accurate movement throughout the chassis