Motion - The Beast

Motion-Systems Qubic System - CH2-220.3DOF.BT1 Ready2Race-Bundle

What is included in the package:

• CH2 Platform
• 4x QS-220 - linear actuator with cup holder
• 2x QS-SB2 - power cabinet (control module)
• 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
• 3x Power cable - 1 pcs of 1,8m long cable for EU market / or 1 pcs of 2m long cable for USA market
• 4x QS brackets (set of 2) for mounting on aluminium profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge) 
• QS-MC6 motion controller set - single unit required to control up to 4 sets of QS (not included - see separate product)
• BT1 Seat-Belt-Tensioner with accessories

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Motion-Systems Qubic System - CH2.220.3DOF.BT1.FGT.SET Ready2Race-Bundle

What is included in the package:

• CH2 Platform
• 4x QS-220 - linear actuator with cup holder
• 2x QS-SB2 - power cabinet (control module)
• 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
• 3x Power cable - 1 pcs of 1,8m long cable for EU market
• 4x QS brackets (set of 2) for mounting on aluminum profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge) 
• QS-MC6 motion controller set - single unit required to control up to 4 sets of QS (not included - see separate product)
• BT1 Seat-Belt-Tensioner with accessories
• Force2Motion Adapter for Qubic BT1 Belt-Tensioner
• F2M-Adaptersystem FGT-Elite-Qubic
• Next Level Racing FGT 160 - Wheel Plate Edition

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Motion-Systems Qubic System - CH2.210.3DOF.BT1.FGT.SET Ready2Race-Bundle

What is included in the package:

• CH2 Platform
• 4x QS-210 - linear actuator with cup holder
• 2x QS-SB2 - power cabinet (control module)
• 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
• 3x Power cable - 1 pcs of 1,8m long cable for EU market
• 4x QS brackets (set of 2) for mounting on aluminum profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge) 
• QS-MC6 motion controller set - single unit required to control up to 4 sets of QS (not included - see separate product)
• BT1 Seat-Belt-Tensioner with accessories
• Force2Motion Adapter for Qubic BT1 Belt-Tensioner
• F2M-Adaptersystem FGT-Elite-Qubic
• Next Level Racing FGT 160 - Wheel Plate Edition

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Ready2Fly Bundle NLR FGT Elite mit Qubic QS220

What is included in the package:

• 1x H.NLR.E025 Next Level Racing F-GT Elite 160 Wheel Plate Edition - BLACK
• 1x H.NLR.S030 Next Level Racing Flight Simulator Seat
• 1x H.NLR.E049 Next Level Racing Elite Series Flight Pack
• 1x H.NLR.E036 Next Level Racing Elite Free Standing Triple Monitor Stand - Black Edition
• 2x H.MOS.QS.220.2DOF Motion-Systems Qubic System - QS-220-2DOF Motion System - Set with 2 Actuators and 1 Power Cabinet
• 4x QS-Brackets (2er Sets) - For mounting on aluminium profile cockpits (note: for mounting an FGT cockpit or similar, please also use the specially widened F2M brackets as an option at extra cost.
• 1x H.MOS.QS.BT1 Motion-Systems Qubic System - Belt Tensioner BT1
• 1x H.F2M.SB6PBK Safety-Belt6-Punkt - Schwarz
• 1x H.MOS.QS.BT1.ML Motion-Systems Qubic System - Motion Lock for Seat Belt Tensioner
• 1x H.MOS.QS.MC6 Motion-Systems Qubic System - QS-MC6 – Motion Controller - A single device is required to control up to 4 QS systems.

Please note: Special price as a package! If you remove individual mandatory components of the package from your shopping basket, you may lose the price advantage. Therefore, please pay close attention to the prices in your shopping basket. 

Motion-Systems Qubic System - QS-220-3DOF Motion System - 3 DOF Set - Set with 4 Actuators, 2 Power Cabinet, 4x Brackets and 1x MC6 Controller

About QS-220

Linear actuator technology by Motion Systems allows to develop highly realistic applications with detailed motion textures, velocity, suspension interaction feedback, engine vibrations, tactile feedback, haptic system and vehicle dynamics. Innovative technology, modular and compact design, as well as the quiet operation makes the QS-220 as a perfect motion base not only for professional application but also for home users in various types of cockpits. Additional sets of QS-220 can be configured as a 4 and 6 actuated system to provide 3 / 4 / 6 DOF using dedicated cockpits from Qubic System product line.

By using dedicated software Qubic Manager the user can use several sets to create the most realistic simulation that immediately responds to onscreen situations to deliver real life experience in gaming or VR
applications. Motion Systems is a global leading motion platforms brand for professionals and the most demanding home users. For over 10 year the company has been designing and providing bespoke motion solutions for industry and cutting edge technology for racing and flight simulation.

Fast Facts - Hardware:

Patent pending technology of QS-L1 linear actuators from Qubic System Line allows to develop highly realistic applications with detailed effects from simulation telemetry. Motor drivers have
been designed by Motion Systems company to do just one job, to control motors in vehicle simulator applications and they are exceptionally good at it.

Included power cabinet (control module) QS-SB2 is responsible for the power distribution and communication to handle telemetry signal processing where motion controller dispatches the commands
to drivers which parse the incoming command as soon as the command arrives. Control module sets the motion and vibration cues for each single actuator. The driver works with both 115V and 230V power
network without any adapters or voltage converters.

General specification of QS-220 set:

• Architecture: 2 / 3 / 4 / 6 DOF (depending on user configuration and number of modules)
• Actuator stroke: 100 mm | 3.93 in
• Maximum velocity:
  • Q-Mode (230V): 800 mm/s
  • Performance Mode (115V/230V): 400 mm/s
  • Heavy Duty Mode (115/230V): 300 mm/s
• Maximum acceleration:
  • Q-Mode (230V): 0.8G*
  • Performance Mode (115V/230V): 0.7G*
  • Heavy Duty Mode (115/230V): 0.4G*
  • *value of acceleration is limited for safety reasons.
• Recommended payload in 3DOF (2x QS-220) configuration:
  • Q-Mode: 200kg
  • Performance Mode: 250kg
  • Heavy Duty Mode: 350kg
• Maximum control frequency: 1000 Hz
• Vibrations frequency range: 0-100 Hz
• Latency: <8 ms
• Product weight: 30 kg | 66 lb
• Total length: QS-L1: 90 mm | 3.55 in, QS-SB2: 385 mm | 15.16 in
• Total width: QS-L1: 90 mm | 3.55 in, QS-SB2: 300 mm | 11.81 in
• Total height: QS-L1: 553-653 mm | 22-26 in, QS-SB2: 88 mm | 3.46 in
• Cable length (QS-L1 actuator - QS-SB2 Power cabinet): 1150mm | 45.2 in
• Power supply requirements: 115/230 VAC Single Phase
• Average power consumption in 3DOF configuration:
  • Q-Mode: 260W (230V)
  • Performance Mode: 280W (230V), 270W (115V)
  • Heavy Duty Mode: 436W (230V), 462W (115V)
• Peak current for breaker specification in 3DOF configuration:
  • Q-Mode: 5.17A (230V)
  • Performance Mode: 4.55A (230V), 7.35A (115V)
  • Heavy Duty Mode: 5.88A (230V), 9.89A (115V)
• Connection: USB

Fast Facts - Software:

Even most advanced hardware is nothing without good software. Qubic Manager by Motion Systems company is professional and specialized software for the platform and is "click and play" compatible with
all major racing and flight titles on PC and constantly updated to support new applications as they are released. Gives user possibilities of motion adjustments, motion post-processing, extensive diagnostic or
easy and fast use of predefined profiles. The Qubic Manager is a powerful engine, yet it’s simple to use meaning you can adjust levels of motion, bumps, roll and pitch with a click of a button.

Qubic Manager software license is free-of-charge.

Few main features:

• Over 80+ already integrated and supported racing games and professional simulation applications.
• Included VR Headway technology uses advanced mathematic formulas to calculate necessary compensation and applies it to the VR headset at runtime. It eliminates platform movements from the VR tracking system causing your experiences to be more immersive, authentic and has huge impact on VR sickness compensation.
• The motor control algorithm has been developed to be used strictly in simulation application. The positioning signal is analyzed and preprocessed directly by the driver, so it is possible to change all driver parameters at basically zero cost (time / latency). Drivers parse the incoming command as soon as the command arrives. It also allows to append different types of vibrations (per actuator) on driver level.
• Motion sickness compensation thanks to telemetry data provided in real time directly by the game’s engine and immediately injected to the hardware to perform.
• Equipped with Tactile Audio Based Feedback System that can use tactile trans-ducers (Buttkicker) connected to a seperate sound card to generate additional effects on your cockpit (Buttkicker and additional Soundcard not included - available seperatly).
• Thanks to having full control of the technology Motion Systems company can change control algorithm source code, introduce new parameters and features without waiting for 3rd party vendors. Simple software update can introduce new features to the customers.
• Motion SDK (FSM or FSDI) for software developers is also available as an extra option. That powerful interface allows to add a motion platforms support to any application or game.
• … and many more!

What is included in the package:

• QS-220 3DOF motion set:
  • 4x QS-220 - linear actuator with cup holder
  • 2x QS-SB2 - power cabinet (control module)
  • 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
  • QS-MC6 motion controller set - single unit required to control up to 4 sets of QS-220 and one CH2
  • 2x Power cable - 1 pcs of 1,8m long cable for EU market / or 1 pcs of 2m long cable for USA market
  • 4x QS brackets for mounting on aluminum profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge) 

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Motion-Systems Qubic System - QS-Pivot

About

Scope of delivery QS-PIVOT:

• 1x QS-PIVOT-Bar
• Screws
• Manual

Actuators NOT included!l

Motion-Systems Qubic System - Motion Lock for Seat Belt Tensioner

Emergency stop switch (Motion Lock) - recommended Option for Seat Belt Tensioner Qubic BT1
(not required if other Qubic systems are present, as the system can be controlled via an (existing) motion lock switch)

F2M adapter system FGT-Elite-Qubic

With the F2M adapter system FGT-Elite-Qubic it is possible to mount the Qubic actuator system QS210 or QS220 on the Next Level Racing FGT Elite cockpit

The F2M base plate is mounted under the Next Level Racing FGT Elite cockpit and closes off the cockpit at the bottom. The control units for the Qubic QS210/QS220 can be mounted on the underside of the plate using pre-drilled holes.

With the extended actuator brackets also included, the actuators can be mounted on the cockpit offset by 40 mm so that they do not collide with the pedal plate of the FGT-Elite/FGT 160.

Attention: When mounting the system on a Qubic CH2, the Qubic CH2 cockpit adapter set is also required (see https://www.force2motion.de/de/cockpit-adapter-set-qubic-ch2.html)

The plate consists of a 5 mm thick folded aluminum sheet, powder-coated in black fine structure, with corresponding holes for attachment to the aluminum profiles of the cockpit. The set is supplied with screws and I-profile M8 slot nuts. The actuator brackets consist of black powder-coated brackets with corresponding holes, e.g. for the FGT-Elite cockpit (80/100 and 160 aluminum profiles).

Scope of delivery:

• Base plate black powder-coated 5 mm drilled for NLR FGT Elite
• T-nuts
• screws
• 4x double sets of actuator brackets for wider actuator mounting - A double set consists of two identical / mirrored brackets.
•  Any controllers and accessories shown are NOT included!

F2M Adapter System FGT-Elite-Qubic – Base Plate

The F2M Adapter System FGT-Elite-Qubic allows the Qubic actuator system QS210 or QS220 to be mounted on the Next Level Racing FGT Elite cockpit.

Please refer to the relevant product description for the complete system. This item contains only the base plate with the necessary screws and slotted nuts

 

 

F2M Adapter System FGT-Elite-Qubic – Bracket Set 4x2

The F2M Adapter System FGT-Elite-Qubic allows the Qubic actuator system QS210 or QS220 to be mounted on the Next Level Racing FGT Elite cockpit.

 

The F2M base plate is also available separately as an option; this not only provides the aluminium cockpit with a sturdy base but also allows the Qubic actuator control units to be mounted from below. This plate is not included in this set (see separate item!

 

 

The F2M-Qubic Actuator Adapter System FGT is designed for mounting Qubic 210/220 actuators on cockpits such as the Next Level Racing FGT and FGT160 series or similar aluminium square-profile cockpits.

Here, there are still attachments on the outer side of the longitudinal beams (such as the struts for the pedal plates, which protrude sideways beyond the longitudinal profiles). This means that the standard Qubic actuator brackets cannot be fitted at this point. The F2M-Qubic Actuator Adapter System FGT consists of 8 identical brackets (2 per actuator), with the actuator mounted 40 mm offset outwards. This creates the necessary space to ensure the actuators do not collide with the protruding mounting parts.

 

 

The brackets have various mounting holes (some of which are slotted) to compensate for manufacturing tolerances and to allow them to be fixed at different heights or to aluminium longitudinal profiles of varying heights (80 to 160 mm with 2 to 4 slotted rails). Both the QS210 and QS220 actuators can be used (no mixed configuration!).

When mounting the entire cockpit on a Qubic CH2, ensure that the longitudinal distance between the front and rear actuators is 1114 mm, as specified in the Qubic manual. This is achieved by adjusting the adapter brackets via the slotted holes.

The F2M base plate is also available separately as an option; this not only provides the aluminium cockpit with a sturdy floor but also allows the Qubic actuator control units to be mounted underneath. This plate is not included in this set (see separate item)!

 

 

The entire system is compatible with the Qubic CH2.

 

Note:

 

The Qubic Adapter Set for Wider Cockpits is required to mount the wider cockpits onto a CH2. This is included with the CH2 for units shipped from May 2025 onwards. For units purchased prior to this date, the set must be purchased separately.

 

 

 

 

 

Cockpit Adapter Set Qubic CH2

With the cockpit adapter set Qubic CH2 it is possible to mount wider cockpits such as the NLF FGT Elite on a Qubic CH2.
 

Motion-Systems Qubic System - QS-BT1 to Next Level Racing® Motion Platform V3 Installation Kit

The QS-BT1 to Next Level Racing® Motion Platform V3 Installation Kit is a solution for connecting the QS-BT1 to the Next Level Racing® Motion Platform V3. Designed for a quick installation and stable connection between Motion Platform and QS-BT1 belt tensioner. Whether you are configuring new equipment or upgrading existing components, this bracket ensures a simple and hassle-free installation process.

Scope of delivery:

• Adapter set
• Set of screws

Please note: BT1 Belt-Tensioner, Cockpit etc. are NOT included.

Note: As this adapter is fitted directly to the V3, the use of a seat slider is not possible or only possible to a limited extent. The seat shifts in relation to the rigidly mounted BT1, which can lead to undesirable effects. Furthermore, no Buttkicker Gamer can be installed on the V3. There is a solution for both problems: If a seat slider is installed, we recommend using the F2M seat slider: Force2Motion adapter for Qubic BT1 Belt-Tensioner to NLR Motion Platform V3 Motion Platform V3

Motion-Systems Qubic System - QS-BT1 Installation kit for QS-S25

The Motion-Systems Qubic System - QS-BT1 Installation kit for QS-S25 is a solution for connecting the QS-BT1 to the Next Level Racing® Motion Platform V3. Designed for a quick installation and stable connection between Motion Platform and QS-BT1 belt tensioner. Whether you are configuring new equipment or upgrading existing components, this bracket ensures a simple and hassle-free installation process.

Scope of delivery:

• Adapter set
• Set of screws

Please note: BT1 Belt-Tensioner, Cockpit etc. are NOT included.

Motion-Systems Qubic System - QS-BT1 Installation kit for QS-CH1

The Motion-Systems Qubic System - QS-BT1 Installation kit for QS-CH1 is a solution for connecting the QS-BT1 to the Next Level Racing® Motion Platform V3. Designed for a quick installation and stable connection between Motion Platform and QS-BT1 belt tensioner. Whether you are configuring new equipment or upgrading existing components, this bracket ensures a simple and hassle-free installation process.

Scope of delivery:

• Adapter set
• Set of screws

Please note: BT1 Belt-Tensioner, Cockpit etc. are NOT included.

Qubic System - QS-S25 Base-Set 6DOF

About:

The QS-S25 is an advanced motion cockpit, designed for the most demanding racers who are looking for a professional simulation experience on high top level. The motion system based on patent pending linear actuator’s technology allows a much stronger sensation range such as under steer, loss of grip or overloading during brake clearly blurring the difference between reality and virtual environment. Due to the combination of dedicated accessories and the QubicManager software, the 6DoF motion platform provides drivers with an extreme experience like in a real race or during the ultimate flights.

The QS-S25 consist of 6 degrees of freedom (surge, sway, heave roll, pitch and yaw) which determined a position and movement of a car. The combination of the high precision technology of the motion system with QubicManager functionalities guarantees perfectly reflect the situations in the selected game. Further the impressive dynamics and high performance of QS-S25 motion system means that the racing simulation has never been at such a top high.

The original machine’s design based on modular and reconfigurable sets of actuators can be used in various racing or flight applications. Compact design and small footprint fits to the medium size gaming rooms, VR centers, and training facilities for professional drivers and -of course: in the private man cave.

The platform is compatible with the selected Virtual Reality headsets on the market, which makes QS-S25 open to a new possibility in combining technologies. QubicManager uses advanced mathematic formulas to calculate necessary compensation and applies it to the VR headset at runtime. It eliminates platform motions from the VR tracking system, causing your experiences to be more immersive and authentic.

Qubic System - QS-Bracket

The universal brackets for Qubic System actuators and 3rd party racing cockpits. The QS brackets have a hole spacing that fits the most common simracing cockpits on the market.

Scope of delivery:
1 bracket - consisting of a left and right half-shell - For a complete set of 4 actuators you need 4 of these parts

A very light, all-purpose racing seat that offers good lateral support, comfort and freedom of movement thanks to a slightly more open design. In view of this balanced combination, the Evo is also fitted as a leather-covered standard seat in some road sports cars. The seat surface is designed to be non-slip. The Evo QRT is available in three different sizes (EVO, EVO L and EVO XL).

QRT (Quick Resin Technology) - Thanks to a new "quick resin" process developed and patented by Sparco, the production process has succeeded in reducing the weight of the seat shell to an absolute minimum while maintaining a high level of strength and stability.

• Weight approx. 7,7 kg
• H.A.N.S. compatible
• belt guide for 4-, 5-, and 6-point belts
• FIA homologated
• Lateral attachment (SB)

A very light, all-purpose racing seat that offers good lateral support, comfort and freedom of movement thanks to a slightly more open design. In view of this balanced combination, the Evo is also fitted as a leather-covered standard seat in some road sports cars. The seat surface is designed to be non-slip. The Evo QRT is available in three different sizes (EVO, EVO L and EVO XL).

QRT (Quick Resin Technology) - Thanks to a new "quick resin" process developed and patented by Sparco, the production process has succeeded in reducing the weight of the seat shell to an absolute minimum while maintaining a high level of strength and stability.

• Weight approx. 7,7 kg
• H.A.N.S. compatible
• belt guide for 4-, 5-, and 6-point belts
• FIA homologated
• Lateral attachment (SB)

A very light, all-purpose racing seat that offers good lateral support, comfort and freedom of movement thanks to a slightly more open design. In view of this balanced combination, the Evo is also fitted as a leather-covered standard seat in some road sports cars. The seat surface is designed to be non-slip. The Evo QRT is available in three different sizes (EVO, EVO L and EVO XL).

QRT (Quick Resin Technology) - Thanks to a new "quick resin" process developed and patented by Sparco, the production process has succeeded in reducing the weight of the seat shell to an absolute minimum while maintaining a high level of strength and stability.

• Weight approx. 7,7 kg
• H.A.N.S. compatible
• belt guide for 4-, 5-, and 6-point belts
• FIA homologated
• Lateral attachment (SB)

Force2Motion Adapter-System Dynamic for NLR Traction Plus (Add-On) - Size S (880 mm width)

• Force2Motion adapter system Dynamic for mounting of cockpits (third party manufacturers, self-made) on the Next Level Racing Traction Plus system
• This is an expansion set for the static Force2Motion-Adapter to upgrade it to a complete adapter system
• Without actuators and Traction Plus System!

With the static adapter it is possible to mount different cockpits on the Traction Plus System. The adapter is based on the Force2Motion adapter system "The Beast" and can be extended by purchasing the 4 DOF actuator set to get additional 4 DOF and move the whole cockpit.

Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!
 

Safety Harnesses 6 point

Force2Motion seat adapter 345mm for Next Level Motion Platform V3 - For mounting race seats on the Next Level Racing Motion Platform V3

Suitable for common racing seats with 345mm hole spacing sideways and 270mm, 273mm and 320mm longitudinal spacing (e.g., Sparco R100, Sparco Pro 2000 Floormount, OMP, RaceRoom, etc.). The seat adapter is mounted between seat or seat rail (for longitudinal adjustment) and Next Level Racing Motion Platform V3 and converts to the lateral hole spacing of 355 mm of the Motion Platform. The adjustment of the seat adjustment thus remains fully intact. By the way: The seat adapter is already included in the Next Level Motion V3 RaceRoom Edition bundle!

Dimensions: 40mm x 30mm x 4mm x 340mm aluminum black powder coated; incl. 4 pcs. M8 countersunk head screws including stop nuts and assembly instructions.

Supplied without seat and seat adjustment slider!