Next Level Racing Flight Simulator Seat

Next Level Racing Flight Simulator Seat Only

Leading features:

• Supports Commercial and Military configurations for a realistic experience.
• Ergonomically designed flight sim seat with lumbar cushion for enhanced comfort.
• Achieve a realistic military configuration with included HOTAS cut-out for precise control.
• Effortless adjustments with Double Seat Recliner Levers for quick backrest positioning and structural stability.
• Convenient seat sliders for easy seat adjustment.
• Compatible with the Elite Series cockpit, GTtrack, F-GT, GTSeat Add-on and Flight Simulator cockpit

About:

Introducing the Next Level Racing® Flight Simulator Seat Only, the ultimate solution for flight simulation enthusiasts seeking an unparalleled experience. This meticulously designed flight seat offers support for both Commercial and Military configurations, delivering an authentic and immersive flight simulation experience. Designed with ergonomics in mind, it features a comfortable flight seat with a lumbar cushion, ensuring extended comfort during those long flight sessions. With the included HOTAS cut out, users can achieve a realistic Military configuration, allowing for precise control and an enhanced sense of realism. The double seat recliner levers enable quick adjustments to the backrest angle, providing optimal comfort and locking in lateral structural rigidity. This versatile seat is compatible with a range of Next Level Racing® products, including GTtrack, F-GT (with included adapter brackets), Elite Series Cockpits, Flight Simulator Cockpit, and GTSeat Add-On, providing seamless integration and expanding the possibilities for an exceptional flight experience.
 

Next Level Racing Elite Free Standing Triple Monitor Stand - Black Edition

Fast Facts

• The complete, no compromise, all-in-one racing cockpit monitor mount solution for the Elite sim racer
• Freestanding design allows preferred screen distance and vertical post mount points (from 720 – 1240mm wide) allows width required for universal compatibility for racing/flight cockpits and commercial applications
• Premium black anodised aluminium profile with high quality powder-coated carbon steel components offers strength for up to three 21” – 43” screens
• Fully adjustable and customizable, offering the most immersive monitor placement setup
• Universal 3mm thick VESA mounting solutions included for maximum compatibility and flexibility (• 200x200mm • 100x200mm • 200x100mm • 150x150mm • 100x100mm • 75x75mm)
• Industry benchmark black anodization with high-quality powder-coated carbon steel parts
• Custom NLR 100x40mm aluminium profile base for strength and rigidity

About

The Next Level Racing® Elite Freestanding Triple Monitor Stand Black Edition offers sim racers the complete triple monitor mounting solution. Constructed from high-grade 6063 aluminium extrusion, the Elite Freestanding Triple Monitor Stand Black Edition supports three 21” - 43” monitors for the most immersive sim racing experience.
 

Motion-Systems Qubic System - Motion Lock for Seat Belt Tensioner

Emergency stop switch (Motion Lock) - recommended Option for Seat Belt Tensioner Qubic BT1
(not required if other Qubic systems are present, as the system can be controlled via an (existing) motion lock switch)

Next Level Racing Elite Series Flight Pack

Leading Features:

• Compatible with the Next Level Racing® Elite Cockpits and other aluminum profile cockpits
• Turn your Elite racing cockpit and other aluminium cockpits into a flight cockpit
• Suited for combat, commercial, general aviation, and space flight enthusiasts.
• Included Center pole HOTAS joystick mounting arm
• Compatible with a wide range of flight electronics from Thrustmaster, Logitech, Winwing, VPC, Honeycomb
• Included Elite Spacer Plate allows for a wide range of clamp-on flight electronics
• Wide range of lateral and vertical adjustment for a more tailored flight experience

About:

Introducing the Next Level Racing® Elite Series Flight Pack - Elevate Your Flight Simulation Experience! Unlock a whole new level of flight simulation with the Next Level Racing® Elite Series Flight Pack, designed to seamlessly transform your Elite series cockpit and other aluminum profile cockpits into a flight cockpit. Crafted with precision, this product boasts exceptional quality, featuring carbon steel and a high-quality powder-coated finish. Whether you're an aspiring combat pilot, a commercial aviation enthusiast, or a space exploration fanatic, the Elite Flight Series allows you to immerse yourself in a unique flight simulation experience.

 

Next Level Racing F-GT Elite 160 Wheel Plate Edition - BLACK

Leading features:

• The ultimate, no compromise, all-in-one 160 aluminium profile racing cockpit for the Elite sim racers
• Offering multi-position Formula, Hybrid, GT, Truck, and Tank driving ergonomics
• Premium black anodised aluminium profile with high quality powder-coated carbon steel components and pre-machined holes for ease of assembly and rigidity.
• Compatible with the Next Level Racing® Motion Platforms*
• Pre-Drilled for Universal compatibility with major steering wheels, pedals, shifter, and handbrake manufacturers
• Industry benchmark aluminium extrusion design with bespoke Next Level Racing® End Caps & T-Slot nuts, and Next Level Racing® Flex-Free Seat Sliders and custom Next Level Racing® Shoulder Bolts
• Custom NLR 160mm X 40mm aluminium profile base for strength and rigidity

About:

The Next Level Racing® F-GT Elite 160 Wheel Plate Edition is the definitive, premier simulator cockpit. Built for the Elite, the F-GT Elite 160 Wheel Plate Edition is designed for racers who demand the highest quality and uncompromised rigidity for racing.

The Next Level Racing® F-GT Elite 160 Wheel Plate Edition is the result of extensive research and feedback and is unrivalled when it comes to flex-free, high quality aluminium extrusion simulation cockpits. The F-GT Elite 160 Wheel Plate Edition sets the benchmark for quality and rigidity - from the premium anodised high-grade aluminium extrusion and powder-coated carbon steel components to the bespoke Next Level Racing® end caps and T-slot nuts.

Racers will feel at home in the F-GT Elite 160, with near-infinite adjustability and customisation options available, and is also compatible with the Next Level Racing® Motion Ecosystem*. Featuring industry-leading materials in combination with fine-tuning adjustability and compatibility, the F-GT Elite 160 Wheel Plate Edition offers the most premium immersive simulation experience on the market.

*The Next Level Racing® F-GT Elite 160 is compatible with the Next Level Racing® Motion Platform V3, Motion Plus Platform. Users can attach two Motion Plus Platforms. Users wanting to attach the Traction Plus Platform to the cockpit require the Next Level Racing® Elite Motion Adaptor Upgrade Kit.
 

Qubic System - QS-MC6 – Motion Controller

NO DELIVERY WITHOUT ACTORS PURCHASED FROM US (QS220, QS210 or CH2)

The Motion Systems - Qubic - QS-MC6 - Motion Controller is the central control unit between the QS-210/220 actuator sets or the CH2 (not included - sold separately) and the PC. One QS-MC6 motion controller can control up to 4 QS-sets.

What is included in the package:

• QS-MC6 motion controller set - single unit required to control up to 4 sets of QS-220-PL:
  • 1x M10 - USB controller
  • 1x QS-SBML-1 - motion lock with additional 2 m long cable
  • 1x QS-MBT-1 - M-BUS terminator
  • 1x USB cable - 0,5 m long cable (USB micro B)
  • 1x CAT.5E patch cord cable - 2 m long

Qubic System - QS-220 Motion System - Set with 2 Actuators and 1 Power Cabinet

About QS-220

Linear actuator technology by Motion Systems allows to develop highly realistic applications with detailed motion textures, velocity, suspension interaction feedback, engine vibrations, tactile feedback, haptic system and vehicle dynamics. Innovative technology, modular and compact design, as well as the quiet operation makes the QS-220 as a perfect motion base not only for professional application but also for home users in various types of cockpits. Additional sets of QS-220 can be configured as a 4 and 6 actuated system to provide 3 / 4 / 6 DOF using dedicated cockpits from Qubic System product line.

By using dedicated software Qubic Manager the user can use several sets to create the most realistic simulation that immediately responds to onscreen situations to deliver real life experience in gaming or VR
applications. Motion Systems is a global leading motion platforms brand for professionals and the most demanding home users. For over 10 year the company has been designing and providing bespoke motion solutions for industry and cutting edge technology for racing and flight simulation.

Fast Facts - Hardware:

Patent pending technology of QS-L1 linear actuators from Qubic System Line allows to develop highly realistic applications with detailed effects from simulation telemetry. Motor drivers have
been designed by Motion Systems company to do just one job, to control motors in vehicle simulator applications and they are exceptionally good at it.

Included power cabinet (control module) QS-SB2 is responsible for the power distribution and communication to handle telemetry signal processing where motion controller dispatches the commands
to drivers which parse the incoming command as soon as the command arrives. Control module sets the motion and vibration cues for each single actuator. The driver works with both 115V and 230V power
network without any adapters or voltage converters.

General specification of QS-220 set:

• Architecture: 2 / 3 / 4 / 6 DOF (depending on user configuration and number of modules)
• Actuator stroke: 100 mm | 3.93 in
• Maximum velocity:
  • Q-Mode (230V): 800 mm/s
  • Performance Mode (115V/230V): 400 mm/s
  • Heavy Duty Mode (115/230V): 300 mm/s
• Maximum acceleration:
  • Q-Mode (230V): 0.8G*
  • Performance Mode (115V/230V): 0.7G*
  • Heavy Duty Mode (115/230V): 0.4G*
  • *value of acceleration is limited for safety reasons.
• Recommended payload in 3DOF (2x QS-220) configuration:
  • Q-Mode: 200kg
  • Performance Mode: 250kg
  • Heavy Duty Mode: 350kg
• Maximum control frequency: 1000 Hz
• Vibrations frequency range: 0-100 Hz
• Latency: <8 ms
• Product weight: 30 kg | 66 lb
• Total length: QS-L1: 90 mm | 3.55 in, QS-SB2: 385 mm | 15.16 in
• Total width: QS-L1: 90 mm | 3.55 in, QS-SB2: 300 mm | 11.81 in
• Total height: QS-L1: 553-653 mm | 22-26 in, QS-SB2: 88 mm | 3.46 in
• Cable length (QS-L1 actuator - QS-SB2 Power cabinet): 1150mm | 45.2 in
• Power supply requirements: 115/230 VAC Single Phase
• Average power consumption in 3DOF configuration:
  • Q-Mode: 260W (230V)
  • Performance Mode: 280W (230V), 270W (115V)
  • Heavy Duty Mode: 436W (230V), 462W (115V)
• Peak current for breaker specification in 3DOF configuration:
  • Q-Mode: 5.17A (230V)
  • Performance Mode: 4.55A (230V), 7.35A (115V)
  • Heavy Duty Mode: 5.88A (230V), 9.89A (115V)
• Connection: USB

Fast Facts - Software:

Even most advanced hardware is nothing without good software. Qubic Manager by Motion Systems company is professional and specialized software for the platform and is "click and play" compatible with
all major racing and flight titles on PC and constantly updated to support new applications as they are released. Gives user possibilities of motion adjustments, motion post-processing, extensive diagnostic or
easy and fast use of predefined profiles. The Qubic Manager is a powerful engine, yet it’s simple to use meaning you can adjust levels of motion, bumps, roll and pitch with a click of a button.

Qubic Manager software license is free-of-charge.

Few main features:

• Over 80+ already integrated and supported racing games and professional simulation applications.
• Included VR Headway technology uses advanced mathematic formulas to calculate necessary compensation and applies it to the VR headset at runtime. It eliminates platform movements from the VR tracking system causing your experiences to be more immersive, authentic and has huge impact on VR sickness compensation.
• The motor control algorithm has been developed to be used strictly in simulation application. The positioning signal is analyzed and preprocessed directly by the driver, so it is possible to change all driver parameters at basically zero cost (time / latency). Drivers parse the incoming command as soon as the command arrives. It also allows to append different types of vibrations (per actuator) on driver level.
• Motion sickness compensation thanks to telemetry data provided in real time directly by the game’s engine and immediately injected to the hardware to perform.
• Equipped with Tactile Audio Based Feedback System that can use tactile trans-ducers (Buttkicker) connected to a seperate sound card to generate additional effects on your cockpit (Buttkicker and additional Soundcard not included - available seperatly).
• Thanks to having full control of the technology Motion Systems company can change control algorithm source code, introduce new parameters and features without waiting for 3rd party vendors. Simple software update can introduce new features to the customers.
• Motion SDK (FSM or FSDI) for software developers is also available as an extra option. That powerful interface allows to add a motion platforms support to any application or game.
• … and many more!

What is included in the package:

• QS-220 motion set:
  • 2x QS-220 - linear actuator with cup holder
  • 1x QS-SB2 - power cabinet (control module)
  • 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
  • 1x Power cable - 1 pcs of 1,8m long cable for EU market / or 1 pcs of 2m long cable for USA market
  • 2x QS brackets for mounting on aluminum profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge) 

What else is needed to operate the set:

• QS-MC6 motion controller set - single unit required to control up to 4 sets of QS-220 (not included - see seperate product)

Motion-Systems Qubic System - Belt Tensioner BT1 - Multi-purpose, dual channel, direct drive seat belt tensioner

Note: All BT1 units supplied by us have the ‘new’, quieter power supply unit. Please note: Delivery does not include an IEC power cable – please order separately (only available from us for German and compatible sockets with type E+F safety plugs) or purchase one yourself that complies with the standards in your country (See image ‘Power Requirements’ for requirements)!

The Polish manufacturer Motion Systems, which has developed the "Qubic System" motion platforms has now announced a new sensation: the Belt Tensioner QS-BT1.

And we are a little proud of this development ourselves, as Force2Motion was a driving force behind the development of this extension. With input from the racing and flightsim scene, we persistently fought for Motion Systems to build what we consider to be an indispensable extension for the Qubic systems. And now Motion Systems has introduced this product, which can also be fitted to many stand-alone cockpits without Motion. And of course it's a great extension for those who already have "everything". Well done, guys!

In combination with the BT1V3 adapter developed by us, the Seat Belt Tensioner can be mounted on a Next Level Racing V3 as well as on practically any other seat console. The function of a seat slider for longitudinal adjustment of the seat is fully retained.

Watch the video (sorry German version only)

More info and photos: https://qubicsystem.com/product/qs-bt1/# - Please be sure to follow the instructions on installation (seat height, belt openings on the seats) etc.!

About:

Powered by the same technology as the stunning QS-220, the QS-BT1 is a multi-purpose dual channel direct drive seatbelt tightener that enhances immersion in racing simulations like no other device in its class and price range. It not only complements the force feedback of the direct drive steering wheels, but also enhances the overall experience of the already highly immersive QS motion platforms and can even be used as a standalone, independent device if required.

Simulation of braking, lateral acceleration, cornering at high speed, wheel lock and loss of traction are among the key features of QS-BT1. Asymmetric engine vibrations and road effects such as rumble strips are also available for games that support them. Although QS-BT1 was mainly developed for racing simulations, with its 200 N force per channel it can also be successfully used in flight simulators to give you the feeling of gigantic forces during high acceleration manoeuvres.

Specifications:

• Power source: 4A/115VAC, 2A/230VAC
• Rated power: 321 W
• Inrush current: 20A/115VAC, 40A/230VAC
• Protection class: 1
• Interface: USB
• Number of independent channels (seat belts): 2
• Tensile force: 20.5 kg/45 lbs/200 N per channel
• Storage temperatures: +4°C to +45°C
• Full performance temperatures: +5°C to +35°C
• Computer compatibility: Windows PC
• Supported effects: Depending on the game
• Multifunctional RGB
• Maximum length of USB cable: 3m
• Maximum length of motion lock cable: 3m (motion lock optional)
• Compatibility with motion platforms: QS, PS, HS [1]

Dimensions:

• Main dimensions: 561 x 99 x 138 mm / 22.13 x 3.90 x 5.43 inches
• Weight of the main unit: 12 kg / 26.46 lbs
• Weight of the power supply unit: 2.8 kg / 6.17 lbs
• Dimensions of the packaging box: 660 x 255 x 180 mm / 25.98 x 10.04 x 7.09 in
• Weight of the packaging box: 18kg / 39.68 lbs

Scope of delivery:

• 1x two-channel seat belt tensioner
• 1x power supply unit
• 1x cable set (without power cable!)
• 1x set of screws
• 1x universal bracket for aluminium profile

Optional accessories (recommended):

• Emergency stop switch (motion lock) - is not required if other Qubic systems are present, as the system can be controlled via an (existing) motion lock switch.
• Note: All BT1 units supplied by us have the ‘new’, quieter power supply unit. Please note: Delivery does not include an IEC power cable – please order separately (only available from us for German and compatible sockets with type E+F safety plugs) or purchase one yourself that complies with the standards in your country (See image ‘Power Requirements’ for requirements)!

Note: For the use of seat movers (such as the NLR Motion Platform V3), the QS-BT1 can only be installed on the upper frame of the motion platform near the pivot point and reduces the permissible user weight. A multi-point harness is required and is not included in the scope of delivery.