Motion Systems Qubic System - SDK - FSMI

Qubic System - QS-220 Motion System - Set with 2 Actuators and 1 Power Cabinet

About QS-220

Linear actuator technology by Motion Systems allows to develop highly realistic applications with detailed motion textures, velocity, suspension interaction feedback, engine vibrations, tactile feedback, haptic system and vehicle dynamics. Innovative technology, modular and compact design, as well as the quiet operation makes the QS-220 as a perfect motion base not only for professional application but also for home users in various types of cockpits. Additional sets of QS-220 can be configured as a 4 and 6 actuated system to provide 3 / 4 / 6 DOF using dedicated cockpits from Qubic System product line.

By using dedicated software Qubic Manager the user can use several sets to create the most realistic simulation that immediately responds to onscreen situations to deliver real life experience in gaming or VR
applications. Motion Systems is a global leading motion platforms brand for professionals and the most demanding home users. For over 10 year the company has been designing and providing bespoke motion solutions for industry and cutting edge technology for racing and flight simulation.

Fast Facts - Hardware:

Patent pending technology of QS-L1 linear actuators from Qubic System Line allows to develop highly realistic applications with detailed effects from simulation telemetry. Motor drivers have
been designed by Motion Systems company to do just one job, to control motors in vehicle simulator applications and they are exceptionally good at it.

Included power cabinet (control module) QS-SB2 is responsible for the power distribution and communication to handle telemetry signal processing where motion controller dispatches the commands
to drivers which parse the incoming command as soon as the command arrives. Control module sets the motion and vibration cues for each single actuator. The driver works with both 115V and 230V power
network without any adapters or voltage converters.

General specification of QS-220 set:

• Architecture: 2 / 3 / 4 / 6 DOF (depending on user configuration and number of modules)
• Actuator stroke: 100 mm | 3.93 in
• Maximum velocity:
  • Q-Mode (230V): 800 mm/s
  • Performance Mode (115V/230V): 400 mm/s
  • Heavy Duty Mode (115/230V): 300 mm/s
• Maximum acceleration:
  • Q-Mode (230V): 0.8G*
  • Performance Mode (115V/230V): 0.7G*
  • Heavy Duty Mode (115/230V): 0.4G*
  • *value of acceleration is limited for safety reasons.
• Recommended payload in 3DOF (2x QS-220) configuration:
  • Q-Mode: 200kg
  • Performance Mode: 250kg
  • Heavy Duty Mode: 350kg
• Maximum control frequency: 1000 Hz
• Vibrations frequency range: 0-100 Hz
• Latency: <8 ms
• Product weight: 30 kg | 66 lb
• Total length: QS-L1: 90 mm | 3.55 in, QS-SB2: 385 mm | 15.16 in
• Total width: QS-L1: 90 mm | 3.55 in, QS-SB2: 300 mm | 11.81 in
• Total height: QS-L1: 553-653 mm | 22-26 in, QS-SB2: 88 mm | 3.46 in
• Cable length (QS-L1 actuator - QS-SB2 Power cabinet): 1150mm | 45.2 in
• Power supply requirements: 115/230 VAC Single Phase
• Average power consumption in 3DOF configuration:
  • Q-Mode: 260W (230V)
  • Performance Mode: 280W (230V), 270W (115V)
  • Heavy Duty Mode: 436W (230V), 462W (115V)
• Peak current for breaker specification in 3DOF configuration:
  • Q-Mode: 5.17A (230V)
  • Performance Mode: 4.55A (230V), 7.35A (115V)
  • Heavy Duty Mode: 5.88A (230V), 9.89A (115V)
• Connection: USB

Fast Facts - Software:

Even most advanced hardware is nothing without good software. Qubic Manager by Motion Systems company is professional and specialized software for the platform and is "click and play" compatible with
all major racing and flight titles on PC and constantly updated to support new applications as they are released. Gives user possibilities of motion adjustments, motion post-processing, extensive diagnostic or
easy and fast use of predefined profiles. The Qubic Manager is a powerful engine, yet it’s simple to use meaning you can adjust levels of motion, bumps, roll and pitch with a click of a button.

Qubic Manager software license is free-of-charge.

Few main features:

• Over 80+ already integrated and supported racing games and professional simulation applications.
• Included VR Headway technology uses advanced mathematic formulas to calculate necessary compensation and applies it to the VR headset at runtime. It eliminates platform movements from the VR tracking system causing your experiences to be more immersive, authentic and has huge impact on VR sickness compensation.
• The motor control algorithm has been developed to be used strictly in simulation application. The positioning signal is analyzed and preprocessed directly by the driver, so it is possible to change all driver parameters at basically zero cost (time / latency). Drivers parse the incoming command as soon as the command arrives. It also allows to append different types of vibrations (per actuator) on driver level.
• Motion sickness compensation thanks to telemetry data provided in real time directly by the game’s engine and immediately injected to the hardware to perform.
• Equipped with Tactile Audio Based Feedback System that can use tactile trans-ducers (Buttkicker) connected to a seperate sound card to generate additional effects on your cockpit (Buttkicker and additional Soundcard not included - available seperatly).
• Thanks to having full control of the technology Motion Systems company can change control algorithm source code, introduce new parameters and features without waiting for 3rd party vendors. Simple software update can introduce new features to the customers.
• Motion SDK (FSM or FSDI) for software developers is also available as an extra option. That powerful interface allows to add a motion platforms support to any application or game.
• … and many more!

What is included in the package:

• QS-220 motion set:
  • 2x QS-220 - linear actuator with cup holder
  • 1x QS-SB2 - power cabinet (control module)
  • 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
  • 1x Power cable - 1 pcs of 1,8m long cable for EU market / or 1 pcs of 2m long cable for USA market
  • 2x QS brackets for mounting on aluminum profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge) 

What else is needed to operate the set:

• QS-MC6 motion controller set - single unit required to control up to 4 sets of QS-220 (not included - see seperate product)

Qubic System - QS-MC6 – Motion Controller

NO DELIVERY WITHOUT ACTORS PURCHASED FROM US (QS220, QS210 or CH2)

The Motion Systems - Qubic - QS-MC6 - Motion Controller is the central control unit between the QS-210/220 actuator sets or the CH2 (not included - sold separately) and the PC. One QS-MC6 motion controller can control up to 4 QS-sets.

What is included in the package:

• QS-MC6 motion controller set - single unit required to control up to 4 sets of QS-220-PL:
  • 1x M10 - USB controller
  • 1x QS-SBML-1 - motion lock with additional 2 m long cable
  • 1x QS-MBT-1 - M-BUS terminator
  • 1x USB cable - 0,5 m long cable (USB micro B)
  • 1x CAT.5E patch cord cable - 2 m long

Qubic System - QS-CH1 Full-Set 3DOF

About:

The QS-CH1 is an innovative training product designed for advanced simulation of various modes of transport. Its compact design based on the technology of linear actuators makes the driver move to the virtual world with the mapping of stimuli from the real world. QS-CH1 is a brand new, modular, and flexibly configurable training product dedicated for advanced land vehicles and city car driving simulation. QS-CH1 is a part of the Qubic System product’s series. By using a number of expansion accessories, including manipulators and dedicated peripherals, it is possible to quickly build a simulator for future drivers or vehicle operators. The motion system consists of 3 DOF platform with electric actuators that provide cues for vehicle acceleration, road curvature and obstacles such as sidewalks and potholes. QS-CH1 only needs a 1.5 square meter place, and it is ideal for applications where the key is to reproduce the ergonomics of the original vehicle within a compact and mobile form. Power cabinets are located in the lower part of the QS-CH1 motion platform, under the cockpit, which significantly reduces the usable space and improves safety.

The motion system QS-CH1 gives the possibility to fit and install various dashboards and steering wheels in the easy way. This product opened up new possibilities for driving schools, car manufacturers and people running R&D projects related to land vehicles.

QS-CH1 device is a modular, and configurable training product dedicated for advanced land vehicles and city car driving simulation. Users who already have a motion base (motion platform) can only use a floor with seat and steering wheel mounting brackets, which can be easily and quickly adapted to individual projects.

Qubic System - QS-S25 Base-Set 6DOF

About:

The QS-S25 is an advanced motion cockpit, designed for the most demanding racers who are looking for a professional simulation experience on high top level. The motion system based on patent pending linear actuator’s technology allows a much stronger sensation range such as under steer, loss of grip or overloading during brake clearly blurring the difference between reality and virtual environment. Due to the combination of dedicated accessories and the QubicManager software, the 6DoF motion platform provides drivers with an extreme experience like in a real race or during the ultimate flights.

The QS-S25 consist of 6 degrees of freedom (surge, sway, heave roll, pitch and yaw) which determined a position and movement of a car. The combination of the high precision technology of the motion system with QubicManager functionalities guarantees perfectly reflect the situations in the selected game. Further the impressive dynamics and high performance of QS-S25 motion system means that the racing simulation has never been at such a top high.

The original machine’s design based on modular and reconfigurable sets of actuators can be used in various racing or flight applications. Compact design and small footprint fits to the medium size gaming rooms, VR centers, and training facilities for professional drivers and -of course: in the private man cave.

The platform is compatible with the selected Virtual Reality headsets on the market, which makes QS-S25 open to a new possibility in combining technologies. QubicManager uses advanced mathematic formulas to calculate necessary compensation and applies it to the VR headset at runtime. It eliminates platform motions from the VR tracking system, causing your experiences to be more immersive and authentic.

Qubic System - QS-V20 Full-Motion-Cockpit

About

The QS-V20 is designed for customers looking for the most realistic simulation. The unique combination of high-performance linear actuator's technology developed by Motion Systems and modern, adjustable accessories allows users to train and experience real racing and flight simulation. The QS-V20 provides an amazing impression to get the feeling of driving a real racing car by delivering sensation of road textures, velocity, suspension interaction feedback, engine vibrations, tactile feedback, haptic system and vehicle dynamics.

Innovative technology, modular and compact design, as well as the quiet operation makes the QS-V20 a perfect motion base not only for professional application but also for home users.
By using dedicated software Qubic Manager the driver / pilot can use several sets to create the most realistic simulation that immediately responds to onscreen situations to deliver real life experience in gaming or VR applications. Qubic Manager contains world-class motion cueing system with integrated "washout filters" to reflect the situation from virtual environment, closing the gap between simulation and reality.

QS-V20 motion platform key features
 

• 4DOF motion system with TRACTION LOSS (heave, roll, pitch and yaw).
• Incredible oversteering feedback sensation.
• Patent pending linear actuators technology guarantee very quiet and precise operation.
• World-class advanced motion cueing system with integrated "washout filters" to reflect the situation from virtual environment, closing the gap between simulation and reality.
• Effective motions and vibrations that perfectly reflect the situations in the selected game or simulation application.
• Comfortable and ergonomic position for the driver / pilot.
• Full support of the proprietary Qubic Manager software - totally free access, no fees at any participation period.
• Compact design and small footprint fits to the medium size gaming rooms, VR centres, training facilities or even home location.
• More responsive and fast-moving way to push telemetry data from simulation to the hardware.
• VR HeadWay technology support (motion compensation).
• Engineered, Designed and Manufactured in Poland/EU.

Motion Systems - Linear Acturator Set PS-240

The PS-240 is a motion solution based on the linear actuator’s technology. The PS-240 motion set includes two linear actuators and the control unit. The motion system is dedicated to projects where it is necessary to reproduce real time vibrations, such as helicopter flight simulation or in the professional entertainment applications, for example haptic floors in VR centers.

The PS-240 consists of two linear actuators with a very high payload and the compact control unit. This motion system can be easly extended to 3DOF configuration. The new generation of electrical cabinet is equipped with proprietary design electronics and software. Design of cabinets allows users to achieve security measures CL class up to SIL (Safety Integrity Level) 3 if required.

Detailed information can be found in the data sheet (Documents tab) for this article.

The price does not include peripherals such as: PC computers, manipulators, simulation software, add-ons, accessories, rig and power cabinet (required)

Please note: The product presented here is intended for professional use and is ordered after detailed consultation by us on specific customer order. PayPal payment or a right of withdrawal is not granted for this product.

Qubic System - QS-S25 Base-Set 6DOF

About:

The QS-S25 is an advanced motion cockpit, designed for the most demanding racers who are looking for a professional simulation experience on high top level. The motion system based on patent pending linear actuator’s technology allows a much stronger sensation range such as under steer, loss of grip or overloading during brake clearly blurring the difference between reality and virtual environment. Due to the combination of dedicated accessories and the QubicManager software, the 6DoF motion platform provides drivers with an extreme experience like in a real race or during the ultimate flights.

The QS-S25 consist of 6 degrees of freedom (surge, sway, heave roll, pitch and yaw) which determined a position and movement of a car. The combination of the high precision technology of the motion system with QubicManager functionalities guarantees perfectly reflect the situations in the selected game. Further the impressive dynamics and high performance of QS-S25 motion system means that the racing simulation has never been at such a top high.

The original machine’s design based on modular and reconfigurable sets of actuators can be used in various racing or flight applications. Compact design and small footprint fits to the medium size gaming rooms, VR centers, and training facilities for professional drivers and -of course: in the private man cave.

The platform is compatible with the selected Virtual Reality headsets on the market, which makes QS-S25 open to a new possibility in combining technologies. QubicManager uses advanced mathematic formulas to calculate necessary compensation and applies it to the VR headset at runtime. It eliminates platform motions from the VR tracking system, causing your experiences to be more immersive and authentic.

Motion-Systems Qubic System - QS-220-3DOF Motion System - 3 DOF Set - Set with 4 Actuators, 2 Power Cabinet, 4x Brackets and 1x MC6 Controller

About QS-220

Linear actuator technology by Motion Systems allows to develop highly realistic applications with detailed motion textures, velocity, suspension interaction feedback, engine vibrations, tactile feedback, haptic system and vehicle dynamics. Innovative technology, modular and compact design, as well as the quiet operation makes the QS-220 as a perfect motion base not only for professional application but also for home users in various types of cockpits. Additional sets of QS-220 can be configured as a 4 and 6 actuated system to provide 3 / 4 / 6 DOF using dedicated cockpits from Qubic System product line.

By using dedicated software Qubic Manager the user can use several sets to create the most realistic simulation that immediately responds to onscreen situations to deliver real life experience in gaming or VR
applications. Motion Systems is a global leading motion platforms brand for professionals and the most demanding home users. For over 10 year the company has been designing and providing bespoke motion solutions for industry and cutting edge technology for racing and flight simulation.

Fast Facts - Hardware:

Patent pending technology of QS-L1 linear actuators from Qubic System Line allows to develop highly realistic applications with detailed effects from simulation telemetry. Motor drivers have
been designed by Motion Systems company to do just one job, to control motors in vehicle simulator applications and they are exceptionally good at it.

Included power cabinet (control module) QS-SB2 is responsible for the power distribution and communication to handle telemetry signal processing where motion controller dispatches the commands
to drivers which parse the incoming command as soon as the command arrives. Control module sets the motion and vibration cues for each single actuator. The driver works with both 115V and 230V power
network without any adapters or voltage converters.

General specification of QS-220 set:

• Architecture: 2 / 3 / 4 / 6 DOF (depending on user configuration and number of modules)
• Actuator stroke: 100 mm | 3.93 in
• Maximum velocity:
  • Q-Mode (230V): 800 mm/s
  • Performance Mode (115V/230V): 400 mm/s
  • Heavy Duty Mode (115/230V): 300 mm/s
• Maximum acceleration:
  • Q-Mode (230V): 0.8G*
  • Performance Mode (115V/230V): 0.7G*
  • Heavy Duty Mode (115/230V): 0.4G*
  • *value of acceleration is limited for safety reasons.
• Recommended payload in 3DOF (2x QS-220) configuration:
  • Q-Mode: 200kg
  • Performance Mode: 250kg
  • Heavy Duty Mode: 350kg
• Maximum control frequency: 1000 Hz
• Vibrations frequency range: 0-100 Hz
• Latency: <8 ms
• Product weight: 30 kg | 66 lb
• Total length: QS-L1: 90 mm | 3.55 in, QS-SB2: 385 mm | 15.16 in
• Total width: QS-L1: 90 mm | 3.55 in, QS-SB2: 300 mm | 11.81 in
• Total height: QS-L1: 553-653 mm | 22-26 in, QS-SB2: 88 mm | 3.46 in
• Cable length (QS-L1 actuator - QS-SB2 Power cabinet): 1150mm | 45.2 in
• Power supply requirements: 115/230 VAC Single Phase
• Average power consumption in 3DOF configuration:
  • Q-Mode: 260W (230V)
  • Performance Mode: 280W (230V), 270W (115V)
  • Heavy Duty Mode: 436W (230V), 462W (115V)
• Peak current for breaker specification in 3DOF configuration:
  • Q-Mode: 5.17A (230V)
  • Performance Mode: 4.55A (230V), 7.35A (115V)
  • Heavy Duty Mode: 5.88A (230V), 9.89A (115V)
• Connection: USB

Fast Facts - Software:

Even most advanced hardware is nothing without good software. Qubic Manager by Motion Systems company is professional and specialized software for the platform and is "click and play" compatible with
all major racing and flight titles on PC and constantly updated to support new applications as they are released. Gives user possibilities of motion adjustments, motion post-processing, extensive diagnostic or
easy and fast use of predefined profiles. The Qubic Manager is a powerful engine, yet it’s simple to use meaning you can adjust levels of motion, bumps, roll and pitch with a click of a button.

Qubic Manager software license is free-of-charge.

Few main features:

• Over 80+ already integrated and supported racing games and professional simulation applications.
• Included VR Headway technology uses advanced mathematic formulas to calculate necessary compensation and applies it to the VR headset at runtime. It eliminates platform movements from the VR tracking system causing your experiences to be more immersive, authentic and has huge impact on VR sickness compensation.
• The motor control algorithm has been developed to be used strictly in simulation application. The positioning signal is analyzed and preprocessed directly by the driver, so it is possible to change all driver parameters at basically zero cost (time / latency). Drivers parse the incoming command as soon as the command arrives. It also allows to append different types of vibrations (per actuator) on driver level.
• Motion sickness compensation thanks to telemetry data provided in real time directly by the game’s engine and immediately injected to the hardware to perform.
• Equipped with Tactile Audio Based Feedback System that can use tactile trans-ducers (Buttkicker) connected to a seperate sound card to generate additional effects on your cockpit (Buttkicker and additional Soundcard not included - available seperatly).
• Thanks to having full control of the technology Motion Systems company can change control algorithm source code, introduce new parameters and features without waiting for 3rd party vendors. Simple software update can introduce new features to the customers.
• Motion SDK (FSM or FSDI) for software developers is also available as an extra option. That powerful interface allows to add a motion platforms support to any application or game.
• … and many more!

What is included in the package:

• QS-220 3DOF motion set:
  • 4x QS-220 - linear actuator with cup holder
  • 2x QS-SB2 - power cabinet (control module)
  • 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
  • QS-MC6 motion controller set - single unit required to control up to 4 sets of QS-220 and one CH2
  • 2x Power cable - 1 pcs of 1,8m long cable for EU market / or 1 pcs of 2m long cable for USA market
  • 4x QS brackets for mounting on aluminum profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge) 

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Motion-Systems Qubic System - QS-210 Motion System - 2DOF

About QS-210

The QS-210 2DoF motion system is designed as a more compact iteration of the Qubic System QS-220 industrial-grade linear actuators. This motion set is linear, efficient, easy to connect, and requires no maintenance. The motion system shares the same features as the linear actuators utilized in Qubic System motion cockpits, particularly the attributes of low latency time and real-time vibrations. Tailored for dedicated sim racers and drivers, the QS-210 motion system includes additional sets of brackets that enable racers to install actuators in the most popular aluminum profile based cockpits available on the global market.

Possible configurations and required add-ons:

• Attention: A QS-MC6 controller is required for operation on a Windows PC (not included) - see corresponding sets
• An additional rocker (QS pivot) is required for operation as a 2.5 DOF system (not included) - see corresponding sets
• The 2DOF system or the 2.5 DOF set can be upgraded to a 3DOF system with an additional QS-210 set (not included) - see corresponding sets

Scope of delivery QS-210 Motion System - 2DOF:

• 2 x QS-210 actuators
• Power cabinet
• 2x brackets for mounting the actuators on standard cockpits
• Screws and accessories
•  Manual

Box dimensions and weight:

• 71 cm x 53 cm x 16 cm | 27.9 in x 20.9 in x 6.3 in
• 30 kg| 66.14 lb

Motion-Systems Qubic System - Motion Lock for Seat Belt Tensioner

Emergency stop switch (Motion Lock) - recommended Option for Seat Belt Tensioner Qubic BT1
(not required if other Qubic systems are present, as the system can be controlled via an (existing) motion lock switch)

Motion-Systems Qubic System - QS-210 Motion System - 3DOF Set

About QS-210

The QS-210 3DoF motion system is designed as a more compact iteration of the Qubic System QS-220 industrial-grade linear actuators. This 3DoF motion set is linear, efficient, easy to connect, and requires no maintenance. The motion system shares the same features as the linear actuators utilized in Qubic System motion cockpits, particularly the attributes of low latency time and real-time vibrations. Tailored for dedicated sim racers and drivers, the QS-210 motion system includes additional sets of brackets that enable racers to install actuators in the most popular aluminum profile based cockpits available on the global market.

Automotive grade performance for your sim racing experience - proudly made in poland

The QS-210 3DoF motion system is a high-end motion set designed to deliver an ultra-realistic simracing experience. It incorporates advanced haptic feedback technology that provides precise force feedback, enhancing the sense of immersion. The system comes with dedicated software for customization and frequent updates, making it a favorite among simracing enthusiasts.

QubicManager software is free of charge and develops in house by Motion Systems engineers. QS-210 takes washout filter’s approach to signal processing and motion control to deliver the next level of immersive driving experience. Every bump, road structure, braking, accelerating and vehicle movement is captured and reproduced within 60 mm/ 2.36” of the available actuator’s stroke. Qubic System products are well-supported allowing users to stay engaged with the latest advancements in simracing technology.

60 mm actuator stroke - realism and immersion of the simulation

In sim racing, the actuator stroke refers to the range of motion or travel that a motion actuator or motion platform is capable of producing. Motion actuators are devices that are often used in sim racing setups to provide physical feedback and simulate the sensations of acceleration, braking, cornering, and other movements experienced in real-world driving.

The actuator stroke determines how far and in what directions the motion platform or seat can move. For example, it may refer to the maximum distance the seat can move forward and backward, tilt side to side, or pitch up and down. The stroke length can vary depending on the specific motion platform or simulator hardware being used. Having a sufficient actuator stroke is important in sim racing because it directly impacts the realism and immersion of the simulation. A 60 mm/2.36 in stroke allows for a wider range of motion and can provide a more accurate representation of the forces experienced in a real vehicle. This can make the driving experience in the simulator feel more authentic and responsive, enhancing the overall immersion for the sim racer.

Plug & Play - simple and hassle-free setup process

The installation of the qs-210 motion system is exceptionally straightforward. You can have it up and running within minutes. attaching the four actuators to your aluminum cockpit is a breeze, thanks to the included mounting brackets that come with the motion set. to streamline the process further, you can easily download the qubic manager software with just one click, and it’s completely free of charge. utilizing the step-by-step tutorial, you’ll effortlessly configure the system to your specific preferences. The motion system only requires a power supply of 115/230 vac. In practically no time at all, you’ll be fully prepared to engage in thrilling races.

Enhance stability - precision and customization in simracing

The qs-210 3dof motion set equipped with dedicated brackets allowing precise customization for an immersive racing adventure. These adaptable brackets seamlessly integrate actuators into popular aluminum based cockpits, delivering unwavering stability and an exhilarating virtual racing experience.

In-house software - even most advanced hardware is nothing without good software

Qubic Manager is a in-house professional and specialized software for motion platforms. It is plug-and-play compatible with all major racing and flight titles on PC and is continually updated to support new titles as they are released. The Qubic Manager is a powerful engine, yet it’s simple to use, allowing you to easily adjust levels of motion, bumps, roll, and pitch with a click of a button. This software caters to users of all skill levels. It features an intuitive interface with clear menus and guided setup for beginners. Quick start wizards and predefined profiles simplify the initial configuration. Troubleshooting guides assist with common issues.

Advanced users benefit from an in-depth editor, scripting support, and multi-device integration capabilities. It seamlessly integrates with QS products, enhancing functionality. A vibrant online community shares tips and scripts for collaboration. This decade-developed software empowers both beginners and experts. It’s a versatile tool for enhancing productivity, automation, and control, with a strong Qubic ecosystem.

VR ready - unlocking seamless virtual reality with motion compensation

Qubic Manager software is ready to embrace virtual reality. This means that users can enjoy a complete and authentic simulation experience without integration hassles, thanks to perfect compatibility with VR technology. With Qubic System’s VR Ready software, simulations become more immersive than ever. Realistic sound effects, seamless movements, and impeccable synchronization with visual elements create unforgettable journeys in the virtual world. The entire experience becomes smooth and effortless, allowing users to focus on the sensation itself rather than technical intricacies. Qubic System redefines simulations, enabling entry into a new dimension of simulated travels through the built-in VR HeadWay 2.0 functionality.

Responsive revolution - linear actuators with a latency time of less than 8ms.

Low latency in simracing is crucial for several key reasons:

• Realism: Simracing aims to replicate real-world racing closely. Low latency ensures the virtual car responds in real-time, enhancing immersion by mimicking a real car’s responsiveness.
• Precise Control: Racing games require precise control over steering, braking, and acceleration. Low latency ensures minimal delay in translating your inputs to the game, enabling accurate and responsive control, especially in fast-paced races.
• Safety: In simracing, accidents can happen. Low latency allows quick reactions to track changes, reducing the risk of collisions or losing control.
• Competitive Advantage: Milliseconds matter in simracing competitions. Low-latency setups give drivers a competitive edge by enabling faster reactions and split-second decisions.
• Real-Time Feedback: Low latency provides immediate feedback from input devices, helping drivers understand their vehicle’s behavior and make adjustments during races.
• Consistency: Minimal delay maintains consistent lap times and performance, allowing simracers to execute precise maneuvers consistently.
• Enhanced Experience: Low latency complements high-quality hardware and software, ensuring a seamless interface and an enjoyable racing experience.
• Training and Skill Development: Simracing serves as a training tool for real-world racing. Low latency lets drivers practice and refine skills in a realistic virtual environment, translating into improved on-track performance.

Qubic ecosystem - all-in-one

The Qubic Ecosystem encompasses a collection of various products and one software to control all of the devices, even 3rd party accessories. Within this product ecosystem, a range of motion systems are created to work with one another, resulting in a seamless and integrated racing experience.

3DoF linear actutors set is a perfect motion base for QS-CH1 cockpit, and most aluminum profile based cockpits available on the global market (using brackets). QS-210 works also with QS-CH2 motion platform.The concept of the Qubic System product and software ecosystem underscores the idea that the whole system works together synergistically to offer users enhanced value and functionality.

What's included:

The QS-210 3DOF MOTION Set consists:

• 4x – QS-210 inear actuator with stabilization plates
• 2x – power cabinet (control module)
• 4x – mounting brackets (2er-Set)
• 1x – motion lock cable (up-link/down-link) – 2 m long
• 2x – power cable
• QS-MC6 Controller with 1x – Motion Lock with 2m cable

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Qubic System - QS-CH1 Base Frame Set

About:

The QS-CH2 is a 2DoF motion platform that gives the SURGE and YAW motion for even better of feeling vehicle’s traction loss, breaking and accelerating. The motion system based on world’s fastest linear actuator’s technology provides incredible levels of vehicle feedback to the driver. This motion platform is suitable for Rally, Drift, GT and F1 simulations. The platform is fully
compatible with Qubic System 3DOF actuator’s set and QS-CH1 motion cockpit.

The system in our Showroom for testing: VIDEO

Link to Video: https://www.youtube.com/watch?v=GuoGMqHqqug

Key Features: What is included in the package:

• QS-CH2 Motion Platform
• QubicManager software download
• USB and power cables
• Nuts and Bolts required for assembly
• Product Manual

Please note:

• Price does not contain peripherals like: The Cockpit (The pictured QS-CH1 with the Qubic actuators is NOT included),PC computer, manipulators, game or simulation software, add-ons, accessories.
• Requires separate purchase of QS-MC6 (motion platform controler) if not already owned
• Production- / Shipping-Time aprox 10-14 weeks after your order.

Attention: Please ask us for the freight costs for your country before ordering, as the shipment may be made together with other Qubic products in a special transport box and the freight costs must therefore be calculated individually.

Qubic System - QS-CH1 Base Frame Set

About:

The QS-CH1 is an innovative training product designed for advanced simulation of various modes of transport. Its compact design based on the technology of linear actuators makes the driver move to the virtual world with the mapping of stimuli from the real world. QS-CH1 is a brand new, modular, and flexibly configurable training product dedicated for advanced land vehicles and city car driving simulation. QS-CH1 is a part of the Qubic System product’s series. By using a number of expansion accessories, including manipulators and dedicated peripherals, it is possible to quickly build a simulator for future drivers or vehicle operators. The motion system consists of 3 DOF platform with electric actuators that provide cues for vehicle acceleration, road curvature and obstacles such as sidewalks and potholes (not included in the Base Framne Set - see seperate products). QS-CH1 only needs a 1.5 square meter place, and it is ideal for applications where the key is to reproduce the ergonomics of the original vehicle within a compact and mobile form. Power cabinets are located in the lower part of the QS-CH1 motion platform, under the cockpit, which significantly reduces the usable space and improves safety.

What is included in the package:

• QS-CH1 BASE
  • 1x motion floor with mounting brackets:
  • 4x mounting bracket for actuators

Attention: A cockpit set is available as an add-on to the base set (see: https://www.force2motion.de/de/motion-systems-qubic-system-qs-ch1-cockpit-set.html). These parts are not included in the base set!

Price does not contain peripherals like: PC computer, actuators, controllers, the cockpit set, game or simulation software, add-ons, accessories.

Motion-Systems Qubic System - QS-210-2.5DOF Motion System - Set

About QS-210

The QS-210 motion system is designed as a more compact iteration of the Qubic System QS-220 industrial-grade linear actuators. This motion set is linear, efficient, easy to connect, and requires no maintenance. The motion system shares the same features as the linear actuators utilized in Qubic System motion cockpits, particularly the attributes of low latency time and real-time vibrations. Tailored for dedicated sim racers and drivers, the QS-210 motion system includes additional sets of brackets that enable racers to install actuators in the most popular aluminum profile based cockpits available on the global market.

Automotive grade performance for your sim racing experience - proudly made in poland

The QS-210 motion system is a high-end motion set designed to deliver an ultra-realistic simracing experience. It incorporates advanced haptic feedback technology that provides precise force feedback, enhancing the sense of immersion. The system comes with dedicated software for customization and frequent updates, making it a favorite among simracing enthusiasts.

QubicManager software is free of charge and develops in house by Motion Systems engineers. QS-210 takes washout filter’s approach to signal processing and motion control to deliver the next level of immersive driving experience. Every bump, road structure, braking, accelerating and vehicle movement is captured and reproduced within 60 mm/ 2.36” of the available actuator’s stroke. Qubic System products are well-supported allowing users to stay engaged with the latest advancements in simracing technology.

60 mm actuator stroke - realism and immersion of the simulation

In sim racing, the actuator stroke refers to the range of motion or travel that a motion actuator or motion platform is capable of producing. Motion actuators are devices that are often used in sim racing setups to provide physical feedback and simulate the sensations of acceleration, braking, cornering, and other movements experienced in real-world driving.

The actuator stroke determines how far and in what directions the motion platform or seat can move. For example, it may refer to the maximum distance the seat can move forward and backward, tilt side to side, or pitch up and down. The stroke length can vary depending on the specific motion platform or simulator hardware being used. Having a sufficient actuator stroke is important in sim racing because it directly impacts the realism and immersion of the simulation. A 60 mm/2.36 in stroke allows for a wider range of motion and can provide a more accurate representation of the forces experienced in a real vehicle. This can make the driving experience in the simulator feel more authentic and responsive, enhancing the overall immersion for the sim racer.

Plug & Play - simple and hassle-free setup process

The installation of the QS-210 motion system is exceptionally straightforward. You can have it up and running within minutes. attaching the four actuators to your aluminum cockpit is a breeze, thanks to the included mounting brackets that come with the motion set. to streamline the process further, you can easily download the qubic manager software with just one click, and it’s completely free of charge. utilizing the step-by-step tutorial, you’ll effortlessly configure the system to your specific preferences. The motion system only requires a power supply of 115/230 vac. In practically no time at all, you’ll be fully prepared to engage in thrilling races.

Enhance stability - precision and customization in simracing

The QS-210 motion set equipped with dedicated brackets allowing precise customization for an immersive racing adventure. These adaptable brackets seamlessly integrate actuators into popular aluminum based cockpits, delivering unwavering stability and an exhilarating virtual racing experience.

In-house software - even most advanced hardware is nothing without good software

Qubic Manager is a in-house professional and specialized software for motion platforms. It is plug-and-play compatible with all major racing and flight titles on PC and is continually updated to support new titles as they are released. The Qubic Manager is a powerful engine, yet it’s simple to use, allowing you to easily adjust levels of motion, bumps, roll, and pitch with a click of a button. This software caters to users of all skill levels. It features an intuitive interface with clear menus and guided setup for beginners. Quick start wizards and predefined profiles simplify the initial configuration. Troubleshooting guides assist with common issues.

Advanced users benefit from an in-depth editor, scripting support, and multi-device integration capabilities. It seamlessly integrates with QS products, enhancing functionality. A vibrant online community shares tips and scripts for collaboration. This decade-developed software empowers both beginners and experts. It’s a versatile tool for enhancing productivity, automation, and control, with a strong Qubic ecosystem.

VR ready - unlocking seamless virtual reality with motion compensation

Qubic Manager software is ready to embrace virtual reality. This means that users can enjoy a complete and authentic simulation experience without integration hassles, thanks to perfect compatibility with VR technology. With Qubic System’s VR Ready software, simulations become more immersive than ever. Realistic sound effects, seamless movements, and impeccable synchronization with visual elements create unforgettable journeys in the virtual world. The entire experience becomes smooth and effortless, allowing users to focus on the sensation itself rather than technical intricacies. Qubic System redefines simulations, enabling entry into a new dimension of simulated travels through the built-in VR HeadWay 2.0 functionality.

Responsive revolution - linear actuators with a latency time of less than 8ms.

Low latency in simracing is crucial for several key reasons:

• Realism: Simracing aims to replicate real-world racing closely. Low latency ensures the virtual car responds in real-time, enhancing immersion by mimicking a real car’s responsiveness.
• Precise Control: Racing games require precise control over steering, braking, and acceleration. Low latency ensures minimal delay in translating your inputs to the game, enabling accurate and responsive control, especially in fast-paced races.
• Safety: In simracing, accidents can happen. Low latency allows quick reactions to track changes, reducing the risk of collisions or losing control.
• Competitive Advantage: Milliseconds matter in simracing competitions. Low-latency setups give drivers a competitive edge by enabling faster reactions and split-second decisions.
• Real-Time Feedback: Low latency provides immediate feedback from input devices, helping drivers understand their vehicle’s behavior and make adjustments during races.
• Consistency: Minimal delay maintains consistent lap times and performance, allowing simracers to execute precise maneuvers consistently.
• Enhanced Experience: Low latency complements high-quality hardware and software, ensuring a seamless interface and an enjoyable racing experience.
• Training and Skill Development: Simracing serves as a training tool for real-world racing. Low latency lets drivers practice and refine skills in a realistic virtual environment, translating into improved on-track performance.

Qubic ecosystem - all-in-one

The Qubic Ecosystem encompasses a collection of various products and one software to control all of the devices, even 3rd party accessories. Within this product ecosystem, a range of motion systems are created to work with one another, resulting in a seamless and integrated racing experience.

Teh QS21ß set is a perfect motion base for most aluminum profile based cockpits available on the global market (using brackets). QS-210 works also with QS-CH2 motion platform (Only as 3DOF set, not with pivot bar!).The concept of the Qubic System product and software ecosystem underscores the idea that the whole system works together synergistically to offer users enhanced value and functionality.

With Motion-Systems Qubic System - QS-Pivot to a 2.5 DOF-System

QS-Pivot is an innovative accessory designed for users seeking the intense sensations typically found in high-end simulators. When combined with QS-210 or QS-220 actuators, it creates a unique 2.5 DOF* configuration that delivers full immersion in driving simulation.

We recognize that many individuals cannot afford the one-time expense of implementing a 3DOF (4 actuators) system for their simulator. To address this, we are introducing the option to take the first step with just 2 actuators using an additional accessory: the pivot leg, which we are thrilled to add to the Qubic System lineup.

Interestingly, if the QS-PIVOT is mounted sufficiently far forward, this setup will create the impression of an additional HEAVE axis, as the motion from the PITCH axis will be so optimized that it feels like translational (vertical) motion to the human vestibular system. Thus, with just 2 actuators combined with the pivot leg, users can achieve a “2.5 DOF” sensation, which may be an excellent starting point for many enthusiasts.* Heave motion pattern combined from pitch axis.

What's included:

QS-210 2.5DOF MOTION Set consists:

• 2x – linear actuator with stabilization plates
• 2x – power cabinet (control module)
• 2x – mounting brackets (set of 2)
• 1x – motion lock cable (up-link/down-link) – 2 m long
• 1x – power cable
• QS-PIVOT
• QS-MC6 Controller Set with 1x – motion lock with additional 2 m long cable

Can be upgraded to a full 3DOF set with an additional optional QS-2102DOF set (not included)!

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Motion Systems - Motion Platform PS-6TM-2500

About: Designed for special tasks

Qubic System - QS-MC6 – Motion Controller

NO DELIVERY WITHOUT ACTORS PURCHASED FROM US (QS220, QS210 or CH2)

The Motion Systems - Qubic - QS-MC6 - Motion Controller is the central control unit between the QS-210/220 actuator sets or the CH2 (not included - sold separately) and the PC. One QS-MC6 motion controller can control up to 4 QS-sets.

What is included in the package:

• QS-MC6 motion controller set - single unit required to control up to 4 sets of QS-220-PL:
  • 1x M10 - USB controller
  • 1x QS-SBML-1 - motion lock with additional 2 m long cable
  • 1x QS-MBT-1 - M-BUS terminator
  • 1x USB cable - 0,5 m long cable (USB micro B)
  • 1x CAT.5E patch cord cable - 2 m long

Motion-Systems Qubic System - QS-Pivot

About

Scope of delivery QS-PIVOT:

• 1x QS-PIVOT-Bar
• Screws
• Manual

Actuators NOT included!l