Force2Motion Products

Force2Motion Adapterset for Next Level Racing Motion Platform V3 in Fanatec Cockpit

What’s Included

• Force2Motion adapter for installing the Motion Platform in the Fanatec cockpit (Fanatec Cockpit and Next Level Racing® V3 Motion Platform not included)
• Force2Motion adapter for mounting Fanatec handbrake on Fanatec shifter when using Motion Platform (handbrake, shifter and Fanatec Clamp not included)
• Manual (German)

Fanatec Cockpit and Next Level Racing® V3 Motion Platform not included!

F2M Adapter Set V3 Motion Platform for Aluminium Cockpits

With the F2M-Adapter Motion Platform V3 for aluminium cockpits it is possible to mount the Next Level Racing Motion Platform V3 in an aluminium cockpit e.g. of Trak Racer type 80 and 160. With the 160 cockpit (160mm overall height), the longitudinal profiles of the seat mount are omitted. With the 80 cockpit these are used (to obtain the necessary height / airspace for the V3). With the 160 cockpit the seat position increases by approx. 2 cm compared to the original seat, with the 80 cockpit by approx. 10 cm. For an inside width in the aluminium cockpit of 500mm.

The set consists of two aluminium brackets in black fine structure powder-coated for the V3 with 4 clamping screws. The inside of the bracket is equipped with a sliding strip so that the surface of the aluminium profiles is protected when the V3 is moved longitudinally.

Attention: When installing, make sure that there is sufficient air space for the fans of the V3 (approx. 2 cm distance to the floor and rear wall) and that the seat and, if applicable, a mounted butt-kicker can move freely without bumping into fixed parts or producing a crushing hazard for the hands. If a static shifter mount is used in the seat's movement area, it must be shortened so that the seat can move freely in all directions (this can be supplied by Force2Motion on request - see corresponding article).

Please Note: Cockpit and V3 not included.

Force2Motion RaceRoom 30x Adapter for Next Level Racing Motion Platform V3

What’s Included:

• Force2Motion adapter for installing the Motion Platform in the RaceRoom cockpits (RaceRoom cockpit not included, but optionally available)
• Force2Motion Seat-Adapter 345mm
• Next Level Racing® Platform Manager Software (Download)
• USB cable
• Power cable
• Manual (english)

Please note. Next Level Racing® V3 Motion Platform not inluded.
When using the Next Level Racing Motion Platform, we strongly recommend using the RaceRoom Stiffener Kits and the RaceRoom Seat Adjustment.

The kit is compatible with the RaceRoom RR3055 and RR3033 (for the cockpits  RR4055 and RR4027 see separate article). However, RaceRoom's 5.1 sound system cannot be used without modification, as the installation space for the subwoofer under the seat is used for the motion platform! The subwoofer must be placed manually outside the cockpit!

Force2Motion adapter for Qubic BT1 Belt-Tensioner to NLR Motion Platform V3

 

In combination with the BT1V3 adapter developed by us, the Seat Belt Tensioner can be mounted on a Next Level Racing V3 as well as on practically any other seat console. The function of a seat slider for longitudinal adjustment of the seat is fully retained.

Watch the video (sorry German version only)

Scope of delivery:

• 1x Force2Motion adapter for Qubic BT1 Belt-Tensioner
• Screw set

Motion platform, belt tensioner, seat slider etc. NOT included.
Attention: Does not fit the Qubic CH1!

Motion-Systems Qubic System - QS-210-2.5DOF Motion System - Set

About QS-210

The QS-210 motion system is designed as a more compact iteration of the Qubic System QS-220 industrial-grade linear actuators. This motion set is linear, efficient, easy to connect, and requires no maintenance. The motion system shares the same features as the linear actuators utilized in Qubic System motion cockpits, particularly the attributes of low latency time and real-time vibrations. Tailored for dedicated sim racers and drivers, the QS-210 motion system includes additional sets of brackets that enable racers to install actuators in the most popular aluminum profile based cockpits available on the global market.

Automotive grade performance for your sim racing experience - proudly made in poland

The QS-210 motion system is a high-end motion set designed to deliver an ultra-realistic simracing experience. It incorporates advanced haptic feedback technology that provides precise force feedback, enhancing the sense of immersion. The system comes with dedicated software for customization and frequent updates, making it a favorite among simracing enthusiasts.

QubicManager software is free of charge and develops in house by Motion Systems engineers. QS-210 takes washout filter’s approach to signal processing and motion control to deliver the next level of immersive driving experience. Every bump, road structure, braking, accelerating and vehicle movement is captured and reproduced within 60 mm/ 2.36” of the available actuator’s stroke. Qubic System products are well-supported allowing users to stay engaged with the latest advancements in simracing technology.

60 mm actuator stroke - realism and immersion of the simulation

In sim racing, the actuator stroke refers to the range of motion or travel that a motion actuator or motion platform is capable of producing. Motion actuators are devices that are often used in sim racing setups to provide physical feedback and simulate the sensations of acceleration, braking, cornering, and other movements experienced in real-world driving.

The actuator stroke determines how far and in what directions the motion platform or seat can move. For example, it may refer to the maximum distance the seat can move forward and backward, tilt side to side, or pitch up and down. The stroke length can vary depending on the specific motion platform or simulator hardware being used. Having a sufficient actuator stroke is important in sim racing because it directly impacts the realism and immersion of the simulation. A 60 mm/2.36 in stroke allows for a wider range of motion and can provide a more accurate representation of the forces experienced in a real vehicle. This can make the driving experience in the simulator feel more authentic and responsive, enhancing the overall immersion for the sim racer.

Plug & Play - simple and hassle-free setup process

The installation of the QS-210 motion system is exceptionally straightforward. You can have it up and running within minutes. attaching the four actuators to your aluminum cockpit is a breeze, thanks to the included mounting brackets that come with the motion set. to streamline the process further, you can easily download the qubic manager software with just one click, and it’s completely free of charge. utilizing the step-by-step tutorial, you’ll effortlessly configure the system to your specific preferences. The motion system only requires a power supply of 115/230 vac. In practically no time at all, you’ll be fully prepared to engage in thrilling races.

Enhance stability - precision and customization in simracing

The QS-210 motion set equipped with dedicated brackets allowing precise customization for an immersive racing adventure. These adaptable brackets seamlessly integrate actuators into popular aluminum based cockpits, delivering unwavering stability and an exhilarating virtual racing experience.

In-house software - even most advanced hardware is nothing without good software

Qubic Manager is a in-house professional and specialized software for motion platforms. It is plug-and-play compatible with all major racing and flight titles on PC and is continually updated to support new titles as they are released. The Qubic Manager is a powerful engine, yet it’s simple to use, allowing you to easily adjust levels of motion, bumps, roll, and pitch with a click of a button. This software caters to users of all skill levels. It features an intuitive interface with clear menus and guided setup for beginners. Quick start wizards and predefined profiles simplify the initial configuration. Troubleshooting guides assist with common issues.

Advanced users benefit from an in-depth editor, scripting support, and multi-device integration capabilities. It seamlessly integrates with QS products, enhancing functionality. A vibrant online community shares tips and scripts for collaboration. This decade-developed software empowers both beginners and experts. It’s a versatile tool for enhancing productivity, automation, and control, with a strong Qubic ecosystem.

VR ready - unlocking seamless virtual reality with motion compensation

Qubic Manager software is ready to embrace virtual reality. This means that users can enjoy a complete and authentic simulation experience without integration hassles, thanks to perfect compatibility with VR technology. With Qubic System’s VR Ready software, simulations become more immersive than ever. Realistic sound effects, seamless movements, and impeccable synchronization with visual elements create unforgettable journeys in the virtual world. The entire experience becomes smooth and effortless, allowing users to focus on the sensation itself rather than technical intricacies. Qubic System redefines simulations, enabling entry into a new dimension of simulated travels through the built-in VR HeadWay 2.0 functionality.

Responsive revolution - linear actuators with a latency time of less than 8ms.

Low latency in simracing is crucial for several key reasons:

• Realism: Simracing aims to replicate real-world racing closely. Low latency ensures the virtual car responds in real-time, enhancing immersion by mimicking a real car’s responsiveness.
• Precise Control: Racing games require precise control over steering, braking, and acceleration. Low latency ensures minimal delay in translating your inputs to the game, enabling accurate and responsive control, especially in fast-paced races.
• Safety: In simracing, accidents can happen. Low latency allows quick reactions to track changes, reducing the risk of collisions or losing control.
• Competitive Advantage: Milliseconds matter in simracing competitions. Low-latency setups give drivers a competitive edge by enabling faster reactions and split-second decisions.
• Real-Time Feedback: Low latency provides immediate feedback from input devices, helping drivers understand their vehicle’s behavior and make adjustments during races.
• Consistency: Minimal delay maintains consistent lap times and performance, allowing simracers to execute precise maneuvers consistently.
• Enhanced Experience: Low latency complements high-quality hardware and software, ensuring a seamless interface and an enjoyable racing experience.
• Training and Skill Development: Simracing serves as a training tool for real-world racing. Low latency lets drivers practice and refine skills in a realistic virtual environment, translating into improved on-track performance.

Qubic ecosystem - all-in-one

The Qubic Ecosystem encompasses a collection of various products and one software to control all of the devices, even 3rd party accessories. Within this product ecosystem, a range of motion systems are created to work with one another, resulting in a seamless and integrated racing experience.

Teh QS21ß set is a perfect motion base for most aluminum profile based cockpits available on the global market (using brackets). QS-210 works also with QS-CH2 motion platform (Only as 3DOF set, not with pivot bar!).The concept of the Qubic System product and software ecosystem underscores the idea that the whole system works together synergistically to offer users enhanced value and functionality.

With Motion-Systems Qubic System - QS-Pivot to a 2.5 DOF-System

QS-Pivot is an innovative accessory designed for users seeking the intense sensations typically found in high-end simulators. When combined with QS-210 or QS-220 actuators, it creates a unique 2.5 DOF* configuration that delivers full immersion in driving simulation.

We recognize that many individuals cannot afford the one-time expense of implementing a 3DOF (4 actuators) system for their simulator. To address this, we are introducing the option to take the first step with just 2 actuators using an additional accessory: the pivot leg, which we are thrilled to add to the Qubic System lineup.

Interestingly, if the QS-PIVOT is mounted sufficiently far forward, this setup will create the impression of an additional HEAVE axis, as the motion from the PITCH axis will be so optimized that it feels like translational (vertical) motion to the human vestibular system. Thus, with just 2 actuators combined with the pivot leg, users can achieve a “2.5 DOF” sensation, which may be an excellent starting point for many enthusiasts.* Heave motion pattern combined from pitch axis.

What's included:

QS-210 2.5DOF MOTION Set consists:

• 2x – linear actuator with stabilization plates
• 2x – power cabinet (control module)
• 2x – mounting brackets (set of 2)
• 1x – motion lock cable (up-link/down-link) – 2 m long
• 1x – power cable
• QS-PIVOT
• QS-MC6 Controller Set with 1x – motion lock with additional 2 m long cable

Can be upgraded to a full 3DOF set with an additional optional QS-2102DOF set (not included)!

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Motion-Systems Qubic System - QS-210 Motion System - 3DOF Set

About QS-210

The QS-210 3DoF motion system is designed as a more compact iteration of the Qubic System QS-220 industrial-grade linear actuators. This 3DoF motion set is linear, efficient, easy to connect, and requires no maintenance. The motion system shares the same features as the linear actuators utilized in Qubic System motion cockpits, particularly the attributes of low latency time and real-time vibrations. Tailored for dedicated sim racers and drivers, the QS-210 motion system includes additional sets of brackets that enable racers to install actuators in the most popular aluminum profile based cockpits available on the global market.

Automotive grade performance for your sim racing experience - proudly made in poland

The QS-210 3DoF motion system is a high-end motion set designed to deliver an ultra-realistic simracing experience. It incorporates advanced haptic feedback technology that provides precise force feedback, enhancing the sense of immersion. The system comes with dedicated software for customization and frequent updates, making it a favorite among simracing enthusiasts.

QubicManager software is free of charge and develops in house by Motion Systems engineers. QS-210 takes washout filter’s approach to signal processing and motion control to deliver the next level of immersive driving experience. Every bump, road structure, braking, accelerating and vehicle movement is captured and reproduced within 60 mm/ 2.36” of the available actuator’s stroke. Qubic System products are well-supported allowing users to stay engaged with the latest advancements in simracing technology.

60 mm actuator stroke - realism and immersion of the simulation

In sim racing, the actuator stroke refers to the range of motion or travel that a motion actuator or motion platform is capable of producing. Motion actuators are devices that are often used in sim racing setups to provide physical feedback and simulate the sensations of acceleration, braking, cornering, and other movements experienced in real-world driving.

The actuator stroke determines how far and in what directions the motion platform or seat can move. For example, it may refer to the maximum distance the seat can move forward and backward, tilt side to side, or pitch up and down. The stroke length can vary depending on the specific motion platform or simulator hardware being used. Having a sufficient actuator stroke is important in sim racing because it directly impacts the realism and immersion of the simulation. A 60 mm/2.36 in stroke allows for a wider range of motion and can provide a more accurate representation of the forces experienced in a real vehicle. This can make the driving experience in the simulator feel more authentic and responsive, enhancing the overall immersion for the sim racer.

Plug & Play - simple and hassle-free setup process

The installation of the qs-210 motion system is exceptionally straightforward. You can have it up and running within minutes. attaching the four actuators to your aluminum cockpit is a breeze, thanks to the included mounting brackets that come with the motion set. to streamline the process further, you can easily download the qubic manager software with just one click, and it’s completely free of charge. utilizing the step-by-step tutorial, you’ll effortlessly configure the system to your specific preferences. The motion system only requires a power supply of 115/230 vac. In practically no time at all, you’ll be fully prepared to engage in thrilling races.

Enhance stability - precision and customization in simracing

The qs-210 3dof motion set equipped with dedicated brackets allowing precise customization for an immersive racing adventure. These adaptable brackets seamlessly integrate actuators into popular aluminum based cockpits, delivering unwavering stability and an exhilarating virtual racing experience.

In-house software - even most advanced hardware is nothing without good software

Qubic Manager is a in-house professional and specialized software for motion platforms. It is plug-and-play compatible with all major racing and flight titles on PC and is continually updated to support new titles as they are released. The Qubic Manager is a powerful engine, yet it’s simple to use, allowing you to easily adjust levels of motion, bumps, roll, and pitch with a click of a button. This software caters to users of all skill levels. It features an intuitive interface with clear menus and guided setup for beginners. Quick start wizards and predefined profiles simplify the initial configuration. Troubleshooting guides assist with common issues.

Advanced users benefit from an in-depth editor, scripting support, and multi-device integration capabilities. It seamlessly integrates with QS products, enhancing functionality. A vibrant online community shares tips and scripts for collaboration. This decade-developed software empowers both beginners and experts. It’s a versatile tool for enhancing productivity, automation, and control, with a strong Qubic ecosystem.

VR ready - unlocking seamless virtual reality with motion compensation

Qubic Manager software is ready to embrace virtual reality. This means that users can enjoy a complete and authentic simulation experience without integration hassles, thanks to perfect compatibility with VR technology. With Qubic System’s VR Ready software, simulations become more immersive than ever. Realistic sound effects, seamless movements, and impeccable synchronization with visual elements create unforgettable journeys in the virtual world. The entire experience becomes smooth and effortless, allowing users to focus on the sensation itself rather than technical intricacies. Qubic System redefines simulations, enabling entry into a new dimension of simulated travels through the built-in VR HeadWay 2.0 functionality.

Responsive revolution - linear actuators with a latency time of less than 8ms.

Low latency in simracing is crucial for several key reasons:

• Realism: Simracing aims to replicate real-world racing closely. Low latency ensures the virtual car responds in real-time, enhancing immersion by mimicking a real car’s responsiveness.
• Precise Control: Racing games require precise control over steering, braking, and acceleration. Low latency ensures minimal delay in translating your inputs to the game, enabling accurate and responsive control, especially in fast-paced races.
• Safety: In simracing, accidents can happen. Low latency allows quick reactions to track changes, reducing the risk of collisions or losing control.
• Competitive Advantage: Milliseconds matter in simracing competitions. Low-latency setups give drivers a competitive edge by enabling faster reactions and split-second decisions.
• Real-Time Feedback: Low latency provides immediate feedback from input devices, helping drivers understand their vehicle’s behavior and make adjustments during races.
• Consistency: Minimal delay maintains consistent lap times and performance, allowing simracers to execute precise maneuvers consistently.
• Enhanced Experience: Low latency complements high-quality hardware and software, ensuring a seamless interface and an enjoyable racing experience.
• Training and Skill Development: Simracing serves as a training tool for real-world racing. Low latency lets drivers practice and refine skills in a realistic virtual environment, translating into improved on-track performance.

Qubic ecosystem - all-in-one

The Qubic Ecosystem encompasses a collection of various products and one software to control all of the devices, even 3rd party accessories. Within this product ecosystem, a range of motion systems are created to work with one another, resulting in a seamless and integrated racing experience.

3DoF linear actutors set is a perfect motion base for QS-CH1 cockpit, and most aluminum profile based cockpits available on the global market (using brackets). QS-210 works also with QS-CH2 motion platform.The concept of the Qubic System product and software ecosystem underscores the idea that the whole system works together synergistically to offer users enhanced value and functionality.

What's included:

The QS-210 3DOF MOTION Set consists:

• 4x – QS-210 inear actuator with stabilization plates
• 2x – power cabinet (control module)
• 4x – mounting brackets (2er-Set)
• 1x – motion lock cable (up-link/down-link) – 2 m long
• 2x – power cable
• QS-MC6 Controller with 1x – Motion Lock with 2m cable

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Qubic System - QS-220 Motion System - Set with 2 Actuators and 1 Power Cabinet

About QS-220

Linear actuator technology by Motion Systems allows to develop highly realistic applications with detailed motion textures, velocity, suspension interaction feedback, engine vibrations, tactile feedback, haptic system and vehicle dynamics. Innovative technology, modular and compact design, as well as the quiet operation makes the QS-220 as a perfect motion base not only for professional application but also for home users in various types of cockpits. Additional sets of QS-220 can be configured as a 4 and 6 actuated system to provide 3 / 4 / 6 DOF using dedicated cockpits from Qubic System product line.

By using dedicated software Qubic Manager the user can use several sets to create the most realistic simulation that immediately responds to onscreen situations to deliver real life experience in gaming or VR
applications. Motion Systems is a global leading motion platforms brand for professionals and the most demanding home users. For over 10 year the company has been designing and providing bespoke motion solutions for industry and cutting edge technology for racing and flight simulation.

Fast Facts - Hardware:

Patent pending technology of QS-L1 linear actuators from Qubic System Line allows to develop highly realistic applications with detailed effects from simulation telemetry. Motor drivers have
been designed by Motion Systems company to do just one job, to control motors in vehicle simulator applications and they are exceptionally good at it.

Included power cabinet (control module) QS-SB2 is responsible for the power distribution and communication to handle telemetry signal processing where motion controller dispatches the commands
to drivers which parse the incoming command as soon as the command arrives. Control module sets the motion and vibration cues for each single actuator. The driver works with both 115V and 230V power
network without any adapters or voltage converters.

General specification of QS-220 set:

• Architecture: 2 / 3 / 4 / 6 DOF (depending on user configuration and number of modules)
• Actuator stroke: 100 mm | 3.93 in
• Maximum velocity:
  • Q-Mode (230V): 800 mm/s
  • Performance Mode (115V/230V): 400 mm/s
  • Heavy Duty Mode (115/230V): 300 mm/s
• Maximum acceleration:
  • Q-Mode (230V): 0.8G*
  • Performance Mode (115V/230V): 0.7G*
  • Heavy Duty Mode (115/230V): 0.4G*
  • *value of acceleration is limited for safety reasons.
• Recommended payload in 3DOF (2x QS-220) configuration:
  • Q-Mode: 200kg
  • Performance Mode: 250kg
  • Heavy Duty Mode: 350kg
• Maximum control frequency: 1000 Hz
• Vibrations frequency range: 0-100 Hz
• Latency: <8 ms
• Product weight: 30 kg | 66 lb
• Total length: QS-L1: 90 mm | 3.55 in, QS-SB2: 385 mm | 15.16 in
• Total width: QS-L1: 90 mm | 3.55 in, QS-SB2: 300 mm | 11.81 in
• Total height: QS-L1: 553-653 mm | 22-26 in, QS-SB2: 88 mm | 3.46 in
• Cable length (QS-L1 actuator - QS-SB2 Power cabinet): 1150mm | 45.2 in
• Power supply requirements: 115/230 VAC Single Phase
• Average power consumption in 3DOF configuration:
  • Q-Mode: 260W (230V)
  • Performance Mode: 280W (230V), 270W (115V)
  • Heavy Duty Mode: 436W (230V), 462W (115V)
• Peak current for breaker specification in 3DOF configuration:
  • Q-Mode: 5.17A (230V)
  • Performance Mode: 4.55A (230V), 7.35A (115V)
  • Heavy Duty Mode: 5.88A (230V), 9.89A (115V)
• Connection: USB

Fast Facts - Software:

Even most advanced hardware is nothing without good software. Qubic Manager by Motion Systems company is professional and specialized software for the platform and is "click and play" compatible with
all major racing and flight titles on PC and constantly updated to support new applications as they are released. Gives user possibilities of motion adjustments, motion post-processing, extensive diagnostic or
easy and fast use of predefined profiles. The Qubic Manager is a powerful engine, yet it’s simple to use meaning you can adjust levels of motion, bumps, roll and pitch with a click of a button.

Qubic Manager software license is free-of-charge.

Few main features:

• Over 80+ already integrated and supported racing games and professional simulation applications.
• Included VR Headway technology uses advanced mathematic formulas to calculate necessary compensation and applies it to the VR headset at runtime. It eliminates platform movements from the VR tracking system causing your experiences to be more immersive, authentic and has huge impact on VR sickness compensation.
• The motor control algorithm has been developed to be used strictly in simulation application. The positioning signal is analyzed and preprocessed directly by the driver, so it is possible to change all driver parameters at basically zero cost (time / latency). Drivers parse the incoming command as soon as the command arrives. It also allows to append different types of vibrations (per actuator) on driver level.
• Motion sickness compensation thanks to telemetry data provided in real time directly by the game’s engine and immediately injected to the hardware to perform.
• Equipped with Tactile Audio Based Feedback System that can use tactile trans-ducers (Buttkicker) connected to a seperate sound card to generate additional effects on your cockpit (Buttkicker and additional Soundcard not included - available seperatly).
• Thanks to having full control of the technology Motion Systems company can change control algorithm source code, introduce new parameters and features without waiting for 3rd party vendors. Simple software update can introduce new features to the customers.
• Motion SDK (FSM or FSDI) for software developers is also available as an extra option. That powerful interface allows to add a motion platforms support to any application or game.
• … and many more!

What is included in the package:

• QS-220 motion set:
  • 2x QS-220 - linear actuator with cup holder
  • 1x QS-SB2 - power cabinet (control module)
  • 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
  • 1x Power cable - 1 pcs of 1,8m long cable for EU market / or 1 pcs of 2m long cable for USA market
  • 2x QS brackets for mounting on aluminum profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge) 

What else is needed to operate the set:

• QS-MC6 motion controller set - single unit required to control up to 4 sets of QS-220 (not included - see seperate product)

Motion-Systems Qubic System - QS-220-2.5DOF Motion System - Set with 2 Aktuators and 1 Power Cabinet and Pivot-Bar

About QS-220

Linear actuator technology by Motion Systems allows to develop highly realistic applications with detailed motion textures, velocity, suspension interaction feedback, engine vibrations, tactile feedback, haptic system and vehicle dynamics. Innovative technology, modular and compact design, as well as the quiet operation makes the QS-220 as a perfect motion base not only for professional application but also for home users in various types of cockpits. Additional sets of QS-220 can be configured as a 4 and 6 actuated system to provide 3 / 4 / 6 DOF using dedicated cockpits from Qubic System product line.

By using dedicated software Qubic Manager the user can use several sets to create the most realistic simulation that immediately responds to onscreen situations to deliver real life experience in gaming or VR
applications. Motion Systems is a global leading motion platforms brand for professionals and the most demanding home users. For over 10 year the company has been designing and providing bespoke motion solutions for industry and cutting edge technology for racing and flight simulation.

Fast Facts - Hardware:

Patent pending technology of QS-L1 linear actuators from Qubic System Line allows to develop highly realistic applications with detailed effects from simulation telemetry. Motor drivers have
been designed by Motion Systems company to do just one job, to control motors in vehicle simulator applications and they are exceptionally good at it.

Included power cabinet (control module) QS-SB2 is responsible for the power distribution and communication to handle telemetry signal processing where motion controller dispatches the commands
to drivers which parse the incoming command as soon as the command arrives. Control module sets the motion and vibration cues for each single actuator. The driver works with both 115V and 230V power
network without any adapters or voltage converters.

General specification of QS-220 set:

• Architecture: 2 / 3 / 4 / 6 DOF (depending on user configuration and number of modules)
• Actuator stroke: 100 mm | 3.93 in
• Maximum velocity:
  • Q-Mode (230V): 800 mm/s
  • Performance Mode (115V/230V): 400 mm/s
  • Heavy Duty Mode (115/230V): 300 mm/s
• Maximum acceleration:
  • Q-Mode (230V): 0.8G*
  • Performance Mode (115V/230V): 0.7G*
  • Heavy Duty Mode (115/230V): 0.4G*
  • *value of acceleration is limited for safety reasons.
• Recommended payload in 3DOF (2x QS-220) configuration:
  • Q-Mode: 200kg
  • Performance Mode: 250kg
  • Heavy Duty Mode: 350kg
• Maximum control frequency: 1000 Hz
• Vibrations frequency range: 0-100 Hz
• Latency: <8 ms
• Product weight: 30 kg | 66 lb
• Total length: QS-L1: 90 mm | 3.55 in, QS-SB2: 385 mm | 15.16 in
• Total width: QS-L1: 90 mm | 3.55 in, QS-SB2: 300 mm | 11.81 in
• Total height: QS-L1: 553-653 mm | 22-26 in, QS-SB2: 88 mm | 3.46 in
• Cable length (QS-L1 actuator - QS-SB2 Power cabinet): 1150mm | 45.2 in
• Power supply requirements: 115/230 VAC Single Phase
• Average power consumption in 3DOF configuration:
  • Q-Mode: 260W (230V)
  • Performance Mode: 280W (230V), 270W (115V)
  • Heavy Duty Mode: 436W (230V), 462W (115V)
• Peak current for breaker specification in 3DOF configuration:
  • Q-Mode: 5.17A (230V)
  • Performance Mode: 4.55A (230V), 7.35A (115V)
  • Heavy Duty Mode: 5.88A (230V), 9.89A (115V)
• Connection: USB

Fast Facts - Software:

Even most advanced hardware is nothing without good software. Qubic Manager by Motion Systems company is professional and specialized software for the platform and is "click and play" compatible with
all major racing and flight titles on PC and constantly updated to support new applications as they are released. Gives user possibilities of motion adjustments, motion post-processing, extensive diagnostic or
easy and fast use of predefined profiles. The Qubic Manager is a powerful engine, yet it’s simple to use meaning you can adjust levels of motion, bumps, roll and pitch with a click of a button.

Qubic Manager software license is free-of-charge.

Few main features:

• Over 80+ already integrated and supported racing games and professional simulation applications.
• Included VR Headway technology uses advanced mathematic formulas to calculate necessary compensation and applies it to the VR headset at runtime. It eliminates platform movements from the VR tracking system causing your experiences to be more immersive, authentic and has huge impact on VR sickness compensation.
• The motor control algorithm has been developed to be used strictly in simulation application. The positioning signal is analyzed and preprocessed directly by the driver, so it is possible to change all driver parameters at basically zero cost (time / latency). Drivers parse the incoming command as soon as the command arrives. It also allows to append different types of vibrations (per actuator) on driver level.
• Motion sickness compensation thanks to telemetry data provided in real time directly by the game’s engine and immediately injected to the hardware to perform.
• Equipped with Tactile Audio Based Feedback System that can use tactile trans-ducers (Buttkicker) connected to a seperate sound card to generate additional effects on your cockpit (Buttkicker and additional Soundcard not included - available seperatly).
• Thanks to having full control of the technology Motion Systems company can change control algorithm source code, introduce new parameters and features without waiting for 3rd party vendors. Simple software update can introduce new features to the customers.
• Motion SDK (FSM or FSDI) for software developers is also available as an extra option. That powerful interface allows to add a motion platforms support to any application or game.
• … and many more!

 

With Motion-Systems Qubic System - QS-Pivot to a 2.5 DOF-System

QS-Pivot is an innovative accessory designed for users seeking the intense sensations typically found in high-end simulators. When combined with QS-210 or QS-220 actuators, it creates a unique 2.5 DOF* configuration that delivers full immersion in driving simulation.

We recognize that many individuals cannot afford the one-time expense of implementing a 3DOF (4 actuators) system for their simulator. To address this, we are introducing the option to take the first step with just 2 actuators using an additional accessory: the pivot leg, which we are thrilled to add to the Qubic System lineup.

Interestingly, if the QS-PIVOT is mounted sufficiently far forward, this setup will create the impression of an additional HEAVE axis, as the motion from the PITCH axis will be so optimized that it feels like translational (vertical) motion to the human vestibular system. Thus, with just 2 actuators combined with the pivot leg, users can achieve a “2.5 DOF” sensation, which may be an excellent starting point for many enthusiasts.* Heave motion pattern combined from pitch axis.

What's included:

QS-220 2.5DOF MOTION Set consists:

• 2x – linear actuator QS 220 with stabilization plates
• 2x – power cabinet (control module)
• 2x – mounting brackets (set of 2)
• 1x – motion lock cable (up-link/down-link) – 2 m long
• 1x – power cable
• QS-PIVOT
• QS-MC6 Controller Set with 1x – motion lock with additional 2 m long cable

Can be upgraded to a full 3DOF set with an additional optional QS-220-2DOF set (not included)!

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Motion-Systems Qubic System - CH2-210.3DOF.BT1 Ready2Race-Bundle

What is included in the package:

• CH2 Platform
• 4x QS-210 - linear actuator with cup holder
• 2x QS-SB2 - power cabinet (control module)
• 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
• 3x Power cable - 1 pcs of 1,8m long cable for EU market
• 4x QS brackets (set of 2) for mounting on aluminium profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge) 
• QS-MC6 motion controller set - single unit required to control up to 4 sets of QS (not included - see separate product)
• BT1 Seat-Belt-Tensioner with accessories

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Motion-Systems Qubic System - CH2-220.3DOF.BT1 Ready2Race-Bundle

What is included in the package:

• CH2 Platform
• 4x QS-220 - linear actuator with cup holder
• 2x QS-SB2 - power cabinet (control module)
• 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
• 3x Power cable - 1 pcs of 1,8m long cable for EU market / or 1 pcs of 2m long cable for USA market
• 4x QS brackets (set of 2) for mounting on aluminium profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge) 
• QS-MC6 motion controller set - single unit required to control up to 4 sets of QS (not included - see separate product)
• BT1 Seat-Belt-Tensioner with accessories

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Motion-Systems Qubic System - CH2.220.3DOF.BT1.FGT.SET Ready2Race-Bundle

What is included in the package:

• CH2 Platform
• 4x QS-220 - linear actuator with cup holder
• 2x QS-SB2 - power cabinet (control module)
• 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
• 3x Power cable - 1 pcs of 1,8m long cable for EU market
• 4x QS brackets (set of 2) for mounting on aluminum profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge) 
• QS-MC6 motion controller set - single unit required to control up to 4 sets of QS (not included - see separate product)
• BT1 Seat-Belt-Tensioner with accessories
• Force2Motion Adapter for Qubic BT1 Belt-Tensioner
• F2M-Adaptersystem FGT-Elite-Qubic
• Next Level Racing FGT 160 - Wheel Plate Edition

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Motion-Systems Qubic System - CH2.210.3DOF.BT1.FGT.SET Ready2Race-Bundle

What is included in the package:

• CH2 Platform
• 4x QS-210 - linear actuator with cup holder
• 2x QS-SB2 - power cabinet (control module)
• 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
• 3x Power cable - 1 pcs of 1,8m long cable for EU market
• 4x QS brackets (set of 2) for mounting on aluminum profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge) 
• QS-MC6 motion controller set - single unit required to control up to 4 sets of QS (not included - see separate product)
• BT1 Seat-Belt-Tensioner with accessories
• Force2Motion Adapter for Qubic BT1 Belt-Tensioner
• F2M-Adaptersystem FGT-Elite-Qubic
• Next Level Racing FGT 160 - Wheel Plate Edition

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Ready2Fly Bundle NLR FGT Elite mit Qubic QS220

What is included in the package:

• 1x H.NLR.E025 Next Level Racing F-GT Elite 160 Wheel Plate Edition - BLACK
• 1x H.NLR.S030 Next Level Racing Flight Simulator Seat
• 1x H.NLR.E049 Next Level Racing Elite Series Flight Pack
• 1x H.NLR.E036 Next Level Racing Elite Free Standing Triple Monitor Stand - Black Edition
• 2x H.MOS.QS.220.2DOF Motion-Systems Qubic System - QS-220-2DOF Motion System - Set with 2 Actuators and 1 Power Cabinet
• 4x QS-Brackets (2er Sets) - For mounting on aluminium profile cockpits (note: for mounting an FGT cockpit or similar, please also use the specially widened F2M brackets as an option at extra cost.
• 1x H.MOS.QS.BT1 Motion-Systems Qubic System - Belt Tensioner BT1
• 1x H.F2M.SB6PBK Safety-Belt6-Punkt - Schwarz
• 1x H.MOS.QS.BT1.ML Motion-Systems Qubic System - Motion Lock for Seat Belt Tensioner
• 1x H.MOS.QS.MC6 Motion-Systems Qubic System - QS-MC6 – Motion Controller - A single device is required to control up to 4 QS systems.

Please note: Special price as a package! If you remove individual mandatory components of the package from your shopping basket, you may lose the price advantage. Therefore, please pay close attention to the prices in your shopping basket. 

Motion-Systems Qubic System - QS-220-3DOF Motion System - 3 DOF Set - Set with 4 Actuators, 2 Power Cabinet, 4x Brackets and 1x MC6 Controller

About QS-220

Linear actuator technology by Motion Systems allows to develop highly realistic applications with detailed motion textures, velocity, suspension interaction feedback, engine vibrations, tactile feedback, haptic system and vehicle dynamics. Innovative technology, modular and compact design, as well as the quiet operation makes the QS-220 as a perfect motion base not only for professional application but also for home users in various types of cockpits. Additional sets of QS-220 can be configured as a 4 and 6 actuated system to provide 3 / 4 / 6 DOF using dedicated cockpits from Qubic System product line.

By using dedicated software Qubic Manager the user can use several sets to create the most realistic simulation that immediately responds to onscreen situations to deliver real life experience in gaming or VR
applications. Motion Systems is a global leading motion platforms brand for professionals and the most demanding home users. For over 10 year the company has been designing and providing bespoke motion solutions for industry and cutting edge technology for racing and flight simulation.

Fast Facts - Hardware:

Patent pending technology of QS-L1 linear actuators from Qubic System Line allows to develop highly realistic applications with detailed effects from simulation telemetry. Motor drivers have
been designed by Motion Systems company to do just one job, to control motors in vehicle simulator applications and they are exceptionally good at it.

Included power cabinet (control module) QS-SB2 is responsible for the power distribution and communication to handle telemetry signal processing where motion controller dispatches the commands
to drivers which parse the incoming command as soon as the command arrives. Control module sets the motion and vibration cues for each single actuator. The driver works with both 115V and 230V power
network without any adapters or voltage converters.

General specification of QS-220 set:

• Architecture: 2 / 3 / 4 / 6 DOF (depending on user configuration and number of modules)
• Actuator stroke: 100 mm | 3.93 in
• Maximum velocity:
  • Q-Mode (230V): 800 mm/s
  • Performance Mode (115V/230V): 400 mm/s
  • Heavy Duty Mode (115/230V): 300 mm/s
• Maximum acceleration:
  • Q-Mode (230V): 0.8G*
  • Performance Mode (115V/230V): 0.7G*
  • Heavy Duty Mode (115/230V): 0.4G*
  • *value of acceleration is limited for safety reasons.
• Recommended payload in 3DOF (2x QS-220) configuration:
  • Q-Mode: 200kg
  • Performance Mode: 250kg
  • Heavy Duty Mode: 350kg
• Maximum control frequency: 1000 Hz
• Vibrations frequency range: 0-100 Hz
• Latency: <8 ms
• Product weight: 30 kg | 66 lb
• Total length: QS-L1: 90 mm | 3.55 in, QS-SB2: 385 mm | 15.16 in
• Total width: QS-L1: 90 mm | 3.55 in, QS-SB2: 300 mm | 11.81 in
• Total height: QS-L1: 553-653 mm | 22-26 in, QS-SB2: 88 mm | 3.46 in
• Cable length (QS-L1 actuator - QS-SB2 Power cabinet): 1150mm | 45.2 in
• Power supply requirements: 115/230 VAC Single Phase
• Average power consumption in 3DOF configuration:
  • Q-Mode: 260W (230V)
  • Performance Mode: 280W (230V), 270W (115V)
  • Heavy Duty Mode: 436W (230V), 462W (115V)
• Peak current for breaker specification in 3DOF configuration:
  • Q-Mode: 5.17A (230V)
  • Performance Mode: 4.55A (230V), 7.35A (115V)
  • Heavy Duty Mode: 5.88A (230V), 9.89A (115V)
• Connection: USB

Fast Facts - Software:

Even most advanced hardware is nothing without good software. Qubic Manager by Motion Systems company is professional and specialized software for the platform and is "click and play" compatible with
all major racing and flight titles on PC and constantly updated to support new applications as they are released. Gives user possibilities of motion adjustments, motion post-processing, extensive diagnostic or
easy and fast use of predefined profiles. The Qubic Manager is a powerful engine, yet it’s simple to use meaning you can adjust levels of motion, bumps, roll and pitch with a click of a button.

Qubic Manager software license is free-of-charge.

Few main features:

• Over 80+ already integrated and supported racing games and professional simulation applications.
• Included VR Headway technology uses advanced mathematic formulas to calculate necessary compensation and applies it to the VR headset at runtime. It eliminates platform movements from the VR tracking system causing your experiences to be more immersive, authentic and has huge impact on VR sickness compensation.
• The motor control algorithm has been developed to be used strictly in simulation application. The positioning signal is analyzed and preprocessed directly by the driver, so it is possible to change all driver parameters at basically zero cost (time / latency). Drivers parse the incoming command as soon as the command arrives. It also allows to append different types of vibrations (per actuator) on driver level.
• Motion sickness compensation thanks to telemetry data provided in real time directly by the game’s engine and immediately injected to the hardware to perform.
• Equipped with Tactile Audio Based Feedback System that can use tactile trans-ducers (Buttkicker) connected to a seperate sound card to generate additional effects on your cockpit (Buttkicker and additional Soundcard not included - available seperatly).
• Thanks to having full control of the technology Motion Systems company can change control algorithm source code, introduce new parameters and features without waiting for 3rd party vendors. Simple software update can introduce new features to the customers.
• Motion SDK (FSM or FSDI) for software developers is also available as an extra option. That powerful interface allows to add a motion platforms support to any application or game.
• … and many more!

What is included in the package:

• QS-220 3DOF motion set:
  • 4x QS-220 - linear actuator with cup holder
  • 2x QS-SB2 - power cabinet (control module)
  • 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
  • QS-MC6 motion controller set - single unit required to control up to 4 sets of QS-220 and one CH2
  • 2x Power cable - 1 pcs of 1,8m long cable for EU market / or 1 pcs of 2m long cable for USA market
  • 4x QS brackets for mounting on aluminum profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge) 

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

F2M adapter system FGT-Elite-Qubic

With the F2M adapter system FGT-Elite-Qubic it is possible to mount the Qubic actuator system QS210 or QS220 on the Next Level Racing FGT Elite cockpit

The F2M base plate is mounted under the Next Level Racing FGT Elite cockpit and closes off the cockpit at the bottom. The control units for the Qubic QS210/QS220 can be mounted on the underside of the plate using pre-drilled holes.

With the extended actuator brackets also included, the actuators can be mounted on the cockpit offset by 40 mm so that they do not collide with the pedal plate of the FGT-Elite/FGT 160.

Attention: When mounting the system on a Qubic CH2, the Qubic CH2 cockpit adapter set is also required (see https://www.force2motion.de/de/cockpit-adapter-set-qubic-ch2.html)

The plate consists of a 5 mm thick folded aluminum sheet, powder-coated in black fine structure, with corresponding holes for attachment to the aluminum profiles of the cockpit. The set is supplied with screws and I-profile M8 slot nuts. The actuator brackets consist of black powder-coated brackets with corresponding holes, e.g. for the FGT-Elite cockpit (80/100 and 160 aluminum profiles).

Scope of delivery:

• Base plate black powder-coated 5 mm drilled for NLR FGT Elite
• T-nuts
• screws
• 4x double sets of actuator brackets for wider actuator mounting - A double set consists of two identical / mirrored brackets.
•  Any controllers and accessories shown are NOT included!

F2M Adapter System FGT-Elite-Qubic – Base Plate

The F2M Adapter System FGT-Elite-Qubic allows the Qubic actuator system QS210 or QS220 to be mounted on the Next Level Racing FGT Elite cockpit.

Please refer to the relevant product description for the complete system. This item contains only the base plate with the necessary screws and slotted nuts

 

 

F2M Adapter System FGT-Elite-Qubic – Bracket Set 4x2

The F2M Adapter System FGT-Elite-Qubic allows the Qubic actuator system QS210 or QS220 to be mounted on the Next Level Racing FGT Elite cockpit.

 

The F2M base plate is also available separately as an option; this not only provides the aluminium cockpit with a sturdy base but also allows the Qubic actuator control units to be mounted from below. This plate is not included in this set (see separate item!

 

 

The F2M-Qubic Actuator Adapter System FGT is designed for mounting Qubic 210/220 actuators on cockpits such as the Next Level Racing FGT and FGT160 series or similar aluminium square-profile cockpits.

Here, there are still attachments on the outer side of the longitudinal beams (such as the struts for the pedal plates, which protrude sideways beyond the longitudinal profiles). This means that the standard Qubic actuator brackets cannot be fitted at this point. The F2M-Qubic Actuator Adapter System FGT consists of 8 identical brackets (2 per actuator), with the actuator mounted 40 mm offset outwards. This creates the necessary space to ensure the actuators do not collide with the protruding mounting parts.

 

 

The brackets have various mounting holes (some of which are slotted) to compensate for manufacturing tolerances and to allow them to be fixed at different heights or to aluminium longitudinal profiles of varying heights (80 to 160 mm with 2 to 4 slotted rails). Both the QS210 and QS220 actuators can be used (no mixed configuration!).

When mounting the entire cockpit on a Qubic CH2, ensure that the longitudinal distance between the front and rear actuators is 1114 mm, as specified in the Qubic manual. This is achieved by adjusting the adapter brackets via the slotted holes.

The F2M base plate is also available separately as an option; this not only provides the aluminium cockpit with a sturdy floor but also allows the Qubic actuator control units to be mounted underneath. This plate is not included in this set (see separate item)!

 

 

The entire system is compatible with the Qubic CH2.

 

Note:

 

The Qubic Adapter Set for Wider Cockpits is required to mount the wider cockpits onto a CH2. This is included with the CH2 for units shipped from May 2025 onwards. For units purchased prior to this date, the set must be purchased separately.

 

 

 

 

 

Cockpit Adapter Set Qubic CH2

With the cockpit adapter set Qubic CH2 it is possible to mount wider cockpits such as the NLF FGT Elite on a Qubic CH2.
 

Motion-Systems Qubic System - QS-BT1 to Next Level Racing® Motion Platform V3 Installation Kit

The QS-BT1 to Next Level Racing® Motion Platform V3 Installation Kit is a solution for connecting the QS-BT1 to the Next Level Racing® Motion Platform V3. Designed for a quick installation and stable connection between Motion Platform and QS-BT1 belt tensioner. Whether you are configuring new equipment or upgrading existing components, this bracket ensures a simple and hassle-free installation process.

Scope of delivery:

• Adapter set
• Set of screws

Please note: BT1 Belt-Tensioner, Cockpit etc. are NOT included.

Note: As this adapter is fitted directly to the V3, the use of a seat slider is not possible or only possible to a limited extent. The seat shifts in relation to the rigidly mounted BT1, which can lead to undesirable effects. Furthermore, no Buttkicker Gamer can be installed on the V3. There is a solution for both problems: If a seat slider is installed, we recommend using the F2M seat slider: Force2Motion adapter for Qubic BT1 Belt-Tensioner to NLR Motion Platform V3 Motion Platform V3

ProSimu T1000 bracket for PRS200 actuators - set of 4 - 8020 bracket

With the ProSimu T1000 bracket for PRS200 actuators, ProSimu actuators can be mounted on an aluminum profile cockpit, for example. Supplied as a set of 4 for 4 actuators. Without actuators and screws!

Scope of delivery:

• 4x Bracket (without screws)
• Without ProSimu racing seat/simulator
• Without actuators