Force2Motion Products

With the additional (!) Shifter extension for the RSeat N1 edition of the Next Level Motion Platform, you get an additional second adapter, so you can use an second original RSeat Shifter or similar on each side of the seat. The Shifter extension allows you to mount the shifter so far outward that the seat has enough room to move sideways through the Motion Platform.
The adapter plate is made of high quality aluminum and black powder coated. All necessary screws that can not be taken over by the original cockpit or the Motion Platform are included in the set. Attention: RSeat N1 Cockpit, RSeat N1 Edition of the Motion Platform, Handbrake, Shifter etc. are not included in the set! You only need this additional shifter extension if you want to mount two RSeat Shifter plates left and right at one time!

Force2Motion Adapterset for Next Level Racing Motion Platform V3 in Fanatec Cockpit

What’s Included

• Force2Motion adapter for installing the Motion Platform in the Fanatec cockpit (Fanatec Cockpit and Next Level Racing® V3 Motion Platform not included)
• Force2Motion adapter for mounting Fanatec handbrake on Fanatec shifter when using Motion Platform (handbrake, shifter and Fanatec Clamp not included)
• Manual (German)

Fanatec Cockpit and Next Level Racing® V3 Motion Platform not included!

F2M Adapter Set V3 Motion Platform for Aluminium Cockpits

With the F2M-Adapter Motion Platform V3 for aluminium cockpits it is possible to mount the Next Level Racing Motion Platform V3 in an aluminium cockpit e.g. of Trak Racer type 80 and 160. With the 160 cockpit (160mm overall height), the longitudinal profiles of the seat mount are omitted. With the 80 cockpit these are used (to obtain the necessary height / airspace for the V3). With the 160 cockpit the seat position increases by approx. 2 cm compared to the original seat, with the 80 cockpit by approx. 10 cm. For an inside width in the aluminium cockpit of 500mm.

The set consists of two aluminium brackets in black fine structure powder-coated for the V3 with 4 clamping screws. The inside of the bracket is equipped with a sliding strip so that the surface of the aluminium profiles is protected when the V3 is moved longitudinally.

Attention: When installing, make sure that there is sufficient air space for the fans of the V3 (approx. 2 cm distance to the floor and rear wall) and that the seat and, if applicable, a mounted butt-kicker can move freely without bumping into fixed parts or producing a crushing hazard for the hands. If a static shifter mount is used in the seat's movement area, it must be shortened so that the seat can move freely in all directions (this can be supplied by Force2Motion on request - see corresponding article).

Please Note: Cockpit and V3 not included.

Force2Motion RaceRoom 30x Adapter for Next Level Racing Motion Platform V3

What’s Included:

•  
• Force2Motion adapter for installing the Motion Platform in the RaceRoom cockpits (RaceRoom cockpit not included, but optionally available)
• Force2Motion Seat-Adapter 345mm
• Next Level Racing® Platform Manager Software (Download)
• USB cable
• Power cable
• Manual (english)

Please note. Next Level Racing® V3 Motion Platform not inluded. For a better price as a kit please see product Next Level Racing Motion Platform V3 RaceRoom Edition 30x (More Info).
When using the Next Level Racing Motion Platform, we strongly recommend using the RaceRoom Stiffener Kits and the RaceRoom Seat Adjustment.

The kit is compatible with the RaceRoom RR3055 and RR3033 (for the cockpits  RR4055 and RR4027 see separate article). However, RaceRoom's 5.1 sound system cannot be used without modification, as the installation space for the subwoofer under the seat is used for the motion platform! The subwoofer must be placed manually outside the cockpit!

Force2Motion Seatframe

The F2M seatframe replicates the substructure of the original Next Level GT Track seat or cockpit and extends its function by the possibility of mounting a joystick for a flight cockpit in the centre position in front of the seat (between the pilot's legs). The centrestick can be mounted statically. Depending on how far forward the centrestick is to be positioned, the round mounting plate can be moved forward or back through various drill holes in the range of 0-40mm. The compatibility to the NLR Flightpack is maintained and creates the mounting possibility universally also for other cockpit/seat combinations. A Buttkicker Gamer2 (or similar) can be mounted to the F2M Buttkicker Holder in such a way that it can transfer the effects directly to the seat and move freely in virtually any cockpit (when using the NLR Motion Platform V3) without bumping into fixed cockpit parts.
 
It is essential to ensure that there is sufficient room for the seat to move with the seat frame in the cockpit (do not use in the Fanatec cockpit!).

 

Safety Harnesses 6 point

Force2Motion seat adapter 345mm for Next Level Motion Platform V3 - For mounting race seats on the Next Level Racing Motion Platform V3

Suitable for common racing seats with 345mm hole spacing sideways and 270mm, 273mm and 320mm longitudinal spacing (e.g., Sparco R100, Sparco Pro 2000 Floormount, OMP, RaceRoom, etc.). The seat adapter is mounted between seat or seat rail (for longitudinal adjustment) and Next Level Racing Motion Platform V3 and converts to the lateral hole spacing of 355 mm of the Motion Platform. The adjustment of the seat adjustment thus remains fully intact. By the way: The seat adapter is already included in the Next Level Motion V3 RaceRoom Edition bundle!

Dimensions: 40mm x 30mm x 4mm x 340mm aluminum black powder coated; incl. 4 pcs. M8 countersunk head screws including stop nuts and assembly instructions.

Supplied without seat and seat adjustment slider!