Electric actuators generate precise vibrations in real time and reproduce the finest details while driving – such as curves and obstacles on the racetrack. The lightweight and compact structure makes it easy to transport as well as service for multiple and variable installation.


























Motion-Systems Qubic System - QS-CH1 Full-Set 3DOF
- Product No.:
- H.MOS.QS.CH1.FULLSET
- Dispatch within:
-
No longer available / discontinued (Explanation of stock and delivery times)
- Stock:
- 0 Set
- Weight:
- 140 kg per Set
About:
The QS-CH1 is an innovative training product designed for advanced simulation of various modes of transport. Its compact design based on the technology of linear actuators makes the driver move to the virtual world with the mapping of stimuli from the real world.
The motion system QS-CH1 gives the possibility to fit and install various dashboards and steering wheels in the easy way. This product opened up new possibilities for driving schools, car manufacturers and people running R&D projects related to land vehicles.
QS-CH1 device is a modular, and configurable training product dedicated for advanced land vehicles and city car driving simulation. Users who already have a motion base (motion platform) can only use a floor with seat and steering wheel mounting brackets, which can be easily and quickly adapted to individual projects.
Key Features:
- QS-CH1 FULL SET
- Architecture: 3DOF
- Actuator stroke: 100 mm | 3.93 in
- Vibration frequency range: 0-100 Hz
- Maximum control frequency: 1000 Hz
- Maximum velocity:
- Heavy Duty Mode (115/230V): 300 mm/s
- Maximum acceleration:
- Heavy Duty Mode (115/230V): 0.4G*
- *value of acceleration is limited for safety reasons
- QS-CH1 SYSTEM PERFORMANCE
- Heave: – 50 mm, 50 mm
- Roll: -7°, 7°
- Pitch: -5°, 5°
- QS-CH1 DIMENSIONS
- Total length: 1426 mm | 56 in
- Total width: 856 mm | 33.7 in
- Total height: 763 mm | 30 in
- POWER REQUIREMENTS
- Power supply requirements: 115/230 VAC Single Phase
- Average power consumption in 3DOF configuration:
- Q-Mode: 260W (230V)
- Performance Mode: 280W (230V), 270W (115V)
- Heavy Duty Mode: 436W (230V), 462W (115V)
- Peak current for breaker specification in 3DOF configuration:
- Q-Mode: 5.17A (230V)
- Performance Mode: 4.55A (230V), 7.35A (115V)
- Heavy Duty Mode: 5.88A (230V), 9.89A (115V)
- Connection: USB, Ethernet
- QS-CH1 FULL SET
- 2 x QS-220-PL motion set:
- 4x QS-L1 – linear actuator with stabilization plate
- 2x QS-SB2 – power cabinet (control module)
- 1x QS-SBML-2 – motion lock cable (up-link/down-link) – 2 meters long
- 1x Ethernet RJ-45 cable – 2 meters long
- 1x Power cable
- 1x QS-MC6 controller set:
- 1x M10 – USB controller
- 1x QS-SBML-1 – motion lock with additional cable
- 1x QS-MBT-1 – M-BUS terminator (RJ45 plug with resistor)
- 1x USB cable (mini)
- 1x Ethernet RJ-45 cable – 3 meters long
- 2 x QS-220-PL motion set:
- QS-CH1 BASE
- 1x motion floor with mounting brackets:
- 2x mounting bracket for power cabinet
- 4x mounting bracket for actuator
- 1x mounting bracket for steering wheel with adjustment
- 1x mounting bracket for pedals
- 1x mounting bracket for racing seat with adjustment
Supported games and simulations: https://motionsystems.eu/supported-games/
SDK: https://motionsystems.eu/?s=SDK
- Qubic QS-220-PL Product Datasheet (346.47 KB) :
- Qubic QS-220-PL Product Datasheet
- Qubic QS-CH1 Product Datasheet (811.06 KB) :
- Qubic QS-CH1 Product Datasheet
- Qubic QS-220-PL User Manual (9.32 MB) :
- Qubic QS-220-PL User Manual
- Motion Systems Catalouge (15.13 MB) :
- Motion Systems Catalogue
Motion Systems Michał Stanek
ul. Miedziana 7
55-003 Nadolice Wielkie, Polska
Web: motion-systems.eu
E-Mail: info@motion-systems.eu
Customer reviews
Unfortunately there are no reviews yet. Be the first who rates this product.
You must be logged in to submit a review. Login
This product is compatible with (for example):

Attention: You need the Qubic System - QS-CH1 Base Frame Set as a basis for this add-on (not included)!
What is included in the package:
- QS-CH1 COCKPIT SET
- Steering Wheel Bracket
- Pedals BracketSeat Mounting Bracket
- Seat Adjustment Bracket
- Switch Box
Attention: Please ask us for the freight costs for your country before ordering, as the shipment may be made together with other Qubic products in a special transport box and the freight costs must therefore be calculated individually.


- Add-On for Simulators/Cockpits and others
- Select colour when ordering (black, red, orange, yellow, green, blue, silver, pink)
Suitable for Qubic systems BT1 Belt Tentioner !

The Motion-Systems Qubic System - QS-BT1 Installation kit for QS-CH1 is a solution for connecting the QS-BT1 to the Next Level Racing® Motion Platform V3. Designed for a quick installation and stable connection between Motion Platform and QS-BT1 belt tensioner. Whether you are configuring new equipment or upgrading existing components, this bracket ensures a simple and hassle-free installation process.
Scope of delivery:
- Adapter set
- Set of screws
.jpg)
NOTE: We currently only sell this item as a set with 2x QS220, not individually.
About QS-220
Linear actuator technology by Motion Systems allows to develop highly realistic applications with detailed motion textures, velocity, suspension interaction feedback, engine vibrations, tactile feedback, haptic system and vehicle dynamics. Innovative technology, modular and compact design, as well as the quiet operation makes the QS-220 as a perfect motion base not only for professional application but also for home users in various types of cockpits. Additional sets of QS-220 can be configured as a 4 and 6 actuated system to provide 3 / 4 / 6 DOF using dedicated cockpits from Qubic System product line.
By using dedicated software Qubic Manager the user can use several sets to create the most realistic simulation that immediately responds to onscreen situations to deliver real life experience in gaming or VR
applications. Motion Systems is a global leading motion platforms brand for professionals and the most demanding home users. For over 10 year the company has been designing and providing bespoke motion solutions for industry and cutting edge technology for racing and flight simulation.
Fast Facts - Hardware:
Patent pending technology of QS-L1 linear actuators from Qubic System Line allows to develop highly realistic applications with detailed effects from simulation telemetry. Motor drivers have
been designed by Motion Systems company to do just one job, to control motors in vehicle simulator applications and they are exceptionally good at it.
Included power cabinet (control module) QS-SB2 is responsible for the power distribution and communication to handle telemetry signal processing where motion controller dispatches the commands
to drivers which parse the incoming command as soon as the command arrives. Control module sets the motion and vibration cues for each single actuator. The driver works with both 115V and 230V power
network without any adapters or voltage converters.
General specification of QS-220 set:
- Architecture: 2 / 3 / 4 / 6 DOF (depending on user configuration and number of modules)
- Actuator stroke: 100 mm | 3.93 in
- Maximum velocity:
- Q-Mode (230V): 800 mm/s
- Performance Mode (115V/230V): 400 mm/s
- Heavy Duty Mode (115/230V): 300 mm/s
- Maximum acceleration:
- Q-Mode (230V): 0.8G*
- Performance Mode (115V/230V): 0.7G*
- Heavy Duty Mode (115/230V): 0.4G*
- *value of acceleration is limited for safety reasons.
- Recommended payload in 3DOF (2x QS-220) configuration:
- Q-Mode: 200kg
- Performance Mode: 250kg
- Heavy Duty Mode: 350kg
- Maximum control frequency: 1000 Hz
- Vibrations frequency range: 0-100 Hz
- Latency: <8 ms
- Product weight: 30 kg | 66 lb
- Total length: QS-L1: 90 mm | 3.55 in, QS-SB2: 385 mm | 15.16 in
- Total width: QS-L1: 90 mm | 3.55 in, QS-SB2: 300 mm | 11.81 in
- Total height: QS-L1: 553-653 mm | 22-26 in, QS-SB2: 88 mm | 3.46 in
- Cable length (QS-L1 actuator - QS-SB2 Power cabinet): 1150mm | 45.2 in
- Power supply requirements: 115/230 VAC Single Phase
- Average power consumption in 3DOF configuration:
- Q-Mode: 260W (230V)
- Performance Mode: 280W (230V), 270W (115V)
- Heavy Duty Mode: 436W (230V), 462W (115V)
- Peak current for breaker specification in 3DOF configuration:
- Q-Mode: 5.17A (230V)
- Performance Mode: 4.55A (230V), 7.35A (115V)
- Heavy Duty Mode: 5.88A (230V), 9.89A (115V)
- Connection: USB
Even most advanced hardware is nothing without good software. Qubic Manager by Motion Systems company is professional and specialized software for the platform and is "click and play" compatible with
all major racing and flight titles on PC and constantly updated to support new applications as they are released. Gives user possibilities of motion adjustments, motion post-processing, extensive diagnostic or
easy and fast use of predefined profiles. The Qubic Manager is a powerful engine, yet it’s simple to use meaning you can adjust levels of motion, bumps, roll and pitch with a click of a button.
Qubic Manager software license is free-of-charge.
Few main features:
- Over 80+ already integrated and supported racing games and professional simulation applications.
- Included VR Headway technology uses advanced mathematic formulas to calculate necessary compensation and applies it to the VR headset at runtime. It eliminates platform movements from the VR tracking system causing your experiences to be more immersive, authentic and has huge impact on VR sickness compensation.
- The motor control algorithm has been developed to be used strictly in simulation application. The positioning signal is analyzed and preprocessed directly by the driver, so it is possible to change all driver parameters at basically zero cost (time / latency). Drivers parse the incoming command as soon as the command arrives. It also allows to append different types of vibrations (per actuator) on driver level.
- Motion sickness compensation thanks to telemetry data provided in real time directly by the game’s engine and immediately injected to the hardware to perform.
- Equipped with Tactile Audio Based Feedback System that can use tactile trans-ducers (Buttkicker) connected to a seperate sound card to generate additional effects on your cockpit (Buttkicker and additional Soundcard not included - available seperatly).
- Thanks to having full control of the technology Motion Systems company can change control algorithm source code, introduce new parameters and features without waiting for 3rd party vendors. Simple software update can introduce new features to the customers.
- Motion SDK (FSM or FSDI) for software developers is also available as an extra option. That powerful interface allows to add a motion platforms support to any application or game.
- … and many more!
- QS-220 motion set:
- 2x QS-220 - linear actuator with cup holder
- 1x QS-SB2 - power cabinet (control module)
- 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
- 1x Power cable - 1 pcs of 1,8m long cable for EU market / or 1 pcs of 2m long cable for USA market
- 2x QS brackets for mounting on aluminum profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge)
- QS-MC6 motion controller set - single unit required to control up to 4 sets of QS-220 (not included - see seperate product)

NO DELIVERY WITHOUT ACTORS PURCHASED FROM US (QS220, QS210 or CH2)
The Motion Systems - Qubic - QS-MC6 - Motion Controller is the central control unit between the QS-210/220 actuator sets or the CH2 (not included - sold separately) and the PC. One QS-MC6 motion controller can control up to 4 QS-sets.
What is included in the package:
- QS-MC6 motion controller set - single unit required to control up to 4 sets of QS-220-PL:
- 1x M10 - USB controller
- 1x QS-SBML-1 - motion lock with additional 2 m long cable
- 1x QS-MBT-1 - M-BUS terminator
- 1x USB cable - 0,5 m long cable (USB micro B)
- 1x CAT.5E patch cord cable - 2 m long

About:
The QS-CH1 is an innovative training product designed for advanced simulation of various modes of transport. Its compact design based on the technology of linear actuators makes the driver move to the virtual world with the mapping of stimuli from the real world.
Electric actuators (not included in the Base Frame Set - see seperate products) generate precise vibrations in real time and reproduce the finest details while driving – such as curves and obstacles on the racetrack. The lightweight and compact structure makes it easy to transport as well as service for multiple and variable installation.
What is included in the package:
- QS-CH1 BASE
- 1x motion floor with mounting brackets:
- 4x mounting bracket for actuators
Price does not contain peripherals like: PC computer, actuators, controllers, the cockpit set, game or simulation software, add-ons, accessories.

About:
The QS-CH2 is a 2DoF motion platform that gives the SURGE and YAW motion for even better of feeling vehicle’s traction loss, breaking and accelerating. The motion system based on world’s fastest linear actuator’s technology provides incredible levels of vehicle feedback to the driver. This motion platform is suitable for Rally, Drift, GT and F1 simulations. The platform is fully
compatible with Qubic System 3DOF actuator’s set and QS-CH1 motion cockpit.
The system in our Showroom for testing: VIDEO
Link to Video: https://www.youtube.com/watch?v=GuoGMqHqqug
Key Features:
- Based on world’s fastest Qubic System linear actuators
- Compact and lightweight design
- Suitable for Rally, Drift, GT and other racing simulations
- Supported by dedicated software QubicManager: motion adjustment, motion post-processing, extensive diagnostic or easy and fast use of predefined profiles
- Traction loss
- Also, available as expansion of QS-CH1 motion cockpit
- Proudly made in EU: Engineered, Designed and Manufactured in Poland
- QS-CH2 Motion Platform
- QubicManager software download
- USB and power cables
- Nuts and Bolts required for assembly
- Product Manual
- Price does not contain peripherals like: The Cockpit (The pictured QS-CH1 with the Qubic actuators is NOT included),PC computer, manipulators, game or simulation software, add-ons, accessories.
- Requires separate purchase of QS-MC6 (motion platform controler) if not already owned
- Production- / Shipping-Time aprox 10-14 weeks after your order.

The Polish manufacturer Motion Systems, which has developed the "Qubic System" motion platforms and the V3 and Motion Platform Plus under licence for Next Level Racing, has now announced a new sensation: the Belt Tensioner QS-BT1.
And we are a little proud of this development ourselves, as Force2Motion was a driving force behind the development of this extension. With input from the racing and flightsim scene, we persistently fought for Motion Systems to build what we consider to be an indispensable extension for the Qubic systems. And now Motion Systems has introduced this product, which can also be fitted to many stand-alone cockpits without Motion. And of course it's a great extension for those who already have "everything". Well done, guys!
In combination with the BT1V3 adapter developed by us, the Seat Belt Tensioner can be mounted on a Next Level Racing V3 as well as on practically any other seat console. The function of a seat slider for longitudinal adjustment of the seat is fully retained.
Watch the video (sorry German version only)
More info and photos: https://qubicsystem.com/product/qs-bt1/# Please be sure to follow the instructions on installation (seat height, belt openings on the seats) etc.!
About:
Powered by the same technology as the stunning QS-220, the QS-BT1 is a multi-purpose dual channel direct drive seatbelt tightener that enhances immersion in racing simulations like no other device in its class and price range. It not only complements the force feedback of the direct drive steering wheels, but also enhances the overall experience of the already highly immersive QS motion platforms and can even be used as a standalone, independent device if required.
Simulation of braking, lateral acceleration, cornering at high speed, wheel lock and loss of traction are among the key features of QS-BT1. Asymmetric engine vibrations and road effects such as rumble strips are also available for games that support them. Although QS-BT1 was mainly developed for racing simulations, with its 200 N force per channel it can also be successfully used in flight simulators to give you the feeling of gigantic forces during high acceleration manoeuvres.
Scope of delivery:
- 1x two-channel seat belt tensioner
- 1x power supply unit
- 1x cable set
- 1x set of screws
- 1x universal bracket for aluminium profile
- Emergency stop switch (motion lock) - is not required if other Qubic systems are present, as the system can be controlled via an (existing) motion lock switch.
These products might also interest you (please check compatibility in the product details or ask us explicitly)...

Attention: You need the Qubic System - QS-CH1 Base Frame Set as a basis for this add-on (not included)!
What is included in the package:
- QS-CH1 COCKPIT SET
- Steering Wheel Bracket
- Pedals BracketSeat Mounting Bracket
- Seat Adjustment Bracket
- Switch Box
Attention: Please ask us for the freight costs for your country before ordering, as the shipment may be made together with other Qubic products in a special transport box and the freight costs must therefore be calculated individually.

Emergency stop switch (Motion Lock) - recommended Option for Seat Belt Tensioner Qubic BT1
(not required if other Qubic systems are present, as the system can be controlled via an (existing) motion lock switch)
.jpg)
About QS-220
Linear actuator technology by Motion Systems allows to develop highly realistic applications with detailed motion textures, velocity, suspension interaction feedback, engine vibrations, tactile feedback, haptic system and vehicle dynamics. Innovative technology, modular and compact design, as well as the quiet operation makes the QS-220 as a perfect motion base not only for professional application but also for home users in various types of cockpits. Additional sets of QS-220 can be configured as a 4 and 6 actuated system to provide 3 / 4 / 6 DOF using dedicated cockpits from Qubic System product line.
By using dedicated software Qubic Manager the user can use several sets to create the most realistic simulation that immediately responds to onscreen situations to deliver real life experience in gaming or VR
applications. Motion Systems is a global leading motion platforms brand for professionals and the most demanding home users. For over 10 year the company has been designing and providing bespoke motion solutions for industry and cutting edge technology for racing and flight simulation.
Fast Facts - Hardware:
Patent pending technology of QS-L1 linear actuators from Qubic System Line allows to develop highly realistic applications with detailed effects from simulation telemetry. Motor drivers have
been designed by Motion Systems company to do just one job, to control motors in vehicle simulator applications and they are exceptionally good at it.
Included power cabinet (control module) QS-SB2 is responsible for the power distribution and communication to handle telemetry signal processing where motion controller dispatches the commands
to drivers which parse the incoming command as soon as the command arrives. Control module sets the motion and vibration cues for each single actuator. The driver works with both 115V and 230V power
network without any adapters or voltage converters.
General specification of QS-220 set:
- Architecture: 2 / 3 / 4 / 6 DOF (depending on user configuration and number of modules)
- Actuator stroke: 100 mm | 3.93 in
- Maximum velocity:
- Q-Mode (230V): 800 mm/s
- Performance Mode (115V/230V): 400 mm/s
- Heavy Duty Mode (115/230V): 300 mm/s
- Maximum acceleration:
- Q-Mode (230V): 0.8G*
- Performance Mode (115V/230V): 0.7G*
- Heavy Duty Mode (115/230V): 0.4G*
- *value of acceleration is limited for safety reasons.
- Recommended payload in 3DOF (2x QS-220) configuration:
- Q-Mode: 200kg
- Performance Mode: 250kg
- Heavy Duty Mode: 350kg
- Maximum control frequency: 1000 Hz
- Vibrations frequency range: 0-100 Hz
- Latency: <8 ms
- Product weight: 30 kg | 66 lb
- Total length: QS-L1: 90 mm | 3.55 in, QS-SB2: 385 mm | 15.16 in
- Total width: QS-L1: 90 mm | 3.55 in, QS-SB2: 300 mm | 11.81 in
- Total height: QS-L1: 553-653 mm | 22-26 in, QS-SB2: 88 mm | 3.46 in
- Cable length (QS-L1 actuator - QS-SB2 Power cabinet): 1150mm | 45.2 in
- Power supply requirements: 115/230 VAC Single Phase
- Average power consumption in 3DOF configuration:
- Q-Mode: 260W (230V)
- Performance Mode: 280W (230V), 270W (115V)
- Heavy Duty Mode: 436W (230V), 462W (115V)
- Peak current for breaker specification in 3DOF configuration:
- Q-Mode: 5.17A (230V)
- Performance Mode: 4.55A (230V), 7.35A (115V)
- Heavy Duty Mode: 5.88A (230V), 9.89A (115V)
- Connection: USB
Even most advanced hardware is nothing without good software. Qubic Manager by Motion Systems company is professional and specialized software for the platform and is "click and play" compatible with
all major racing and flight titles on PC and constantly updated to support new applications as they are released. Gives user possibilities of motion adjustments, motion post-processing, extensive diagnostic or
easy and fast use of predefined profiles. The Qubic Manager is a powerful engine, yet it’s simple to use meaning you can adjust levels of motion, bumps, roll and pitch with a click of a button.
Qubic Manager software license is free-of-charge.
Few main features:
- Over 80+ already integrated and supported racing games and professional simulation applications.
- Included VR Headway technology uses advanced mathematic formulas to calculate necessary compensation and applies it to the VR headset at runtime. It eliminates platform movements from the VR tracking system causing your experiences to be more immersive, authentic and has huge impact on VR sickness compensation.
- The motor control algorithm has been developed to be used strictly in simulation application. The positioning signal is analyzed and preprocessed directly by the driver, so it is possible to change all driver parameters at basically zero cost (time / latency). Drivers parse the incoming command as soon as the command arrives. It also allows to append different types of vibrations (per actuator) on driver level.
- Motion sickness compensation thanks to telemetry data provided in real time directly by the game’s engine and immediately injected to the hardware to perform.
- Equipped with Tactile Audio Based Feedback System that can use tactile trans-ducers (Buttkicker) connected to a seperate sound card to generate additional effects on your cockpit (Buttkicker and additional Soundcard not included - available seperatly).
- Thanks to having full control of the technology Motion Systems company can change control algorithm source code, introduce new parameters and features without waiting for 3rd party vendors. Simple software update can introduce new features to the customers.
- Motion SDK (FSM or FSDI) for software developers is also available as an extra option. That powerful interface allows to add a motion platforms support to any application or game.
- … and many more!
With Motion-Systems Qubic System - QS-Pivot to a 2.5 DOF-System
QS-Pivot is an innovative accessory designed for users seeking the intense sensations typically found in high-end simulators. When combined with QS-210 or QS-220 actuators, it creates a unique 2.5 DOF* configuration that delivers full immersion in driving simulation.
We recognize that many individuals cannot afford the one-time expense of implementing a 3DOF (4 actuators) system for their simulator. To address this, we are introducing the option to take the first step with just 2 actuators using an additional accessory: the pivot leg, which we are thrilled to add to the Qubic System lineup.
Interestingly, if the QS-PIVOT is mounted sufficiently far forward, this setup will create the impression of an additional HEAVE axis, as the motion from the PITCH axis will be so optimized that it feels like translational (vertical) motion to the human vestibular system. Thus, with just 2 actuators combined with the pivot leg, users can achieve a “2.5 DOF” sensation, which may be an excellent starting point for many enthusiasts.* Heave motion pattern combined from pitch axis.
What's included:
QS-220 2.5DOF MOTION Set consists:- 2x – linear actuator QS 220 with stabilization plates
- 2x – power cabinet (control module)
- 2x – mounting brackets (set of 2)
- 1x – motion lock cable (up-link/down-link) – 2 m long
- 1x – power cable
- QS-PIVOT
- QS-MC6 Controller Set with 1x – motion lock with additional 2 m long cable
Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!
.jpg)
NOTE: We currently only sell this item as a set with 2x QS220, not individually.
About QS-220
Linear actuator technology by Motion Systems allows to develop highly realistic applications with detailed motion textures, velocity, suspension interaction feedback, engine vibrations, tactile feedback, haptic system and vehicle dynamics. Innovative technology, modular and compact design, as well as the quiet operation makes the QS-220 as a perfect motion base not only for professional application but also for home users in various types of cockpits. Additional sets of QS-220 can be configured as a 4 and 6 actuated system to provide 3 / 4 / 6 DOF using dedicated cockpits from Qubic System product line.
By using dedicated software Qubic Manager the user can use several sets to create the most realistic simulation that immediately responds to onscreen situations to deliver real life experience in gaming or VR
applications. Motion Systems is a global leading motion platforms brand for professionals and the most demanding home users. For over 10 year the company has been designing and providing bespoke motion solutions for industry and cutting edge technology for racing and flight simulation.
Fast Facts - Hardware:
Patent pending technology of QS-L1 linear actuators from Qubic System Line allows to develop highly realistic applications with detailed effects from simulation telemetry. Motor drivers have
been designed by Motion Systems company to do just one job, to control motors in vehicle simulator applications and they are exceptionally good at it.
Included power cabinet (control module) QS-SB2 is responsible for the power distribution and communication to handle telemetry signal processing where motion controller dispatches the commands
to drivers which parse the incoming command as soon as the command arrives. Control module sets the motion and vibration cues for each single actuator. The driver works with both 115V and 230V power
network without any adapters or voltage converters.
General specification of QS-220 set:
- Architecture: 2 / 3 / 4 / 6 DOF (depending on user configuration and number of modules)
- Actuator stroke: 100 mm | 3.93 in
- Maximum velocity:
- Q-Mode (230V): 800 mm/s
- Performance Mode (115V/230V): 400 mm/s
- Heavy Duty Mode (115/230V): 300 mm/s
- Maximum acceleration:
- Q-Mode (230V): 0.8G*
- Performance Mode (115V/230V): 0.7G*
- Heavy Duty Mode (115/230V): 0.4G*
- *value of acceleration is limited for safety reasons.
- Recommended payload in 3DOF (2x QS-220) configuration:
- Q-Mode: 200kg
- Performance Mode: 250kg
- Heavy Duty Mode: 350kg
- Maximum control frequency: 1000 Hz
- Vibrations frequency range: 0-100 Hz
- Latency: <8 ms
- Product weight: 30 kg | 66 lb
- Total length: QS-L1: 90 mm | 3.55 in, QS-SB2: 385 mm | 15.16 in
- Total width: QS-L1: 90 mm | 3.55 in, QS-SB2: 300 mm | 11.81 in
- Total height: QS-L1: 553-653 mm | 22-26 in, QS-SB2: 88 mm | 3.46 in
- Cable length (QS-L1 actuator - QS-SB2 Power cabinet): 1150mm | 45.2 in
- Power supply requirements: 115/230 VAC Single Phase
- Average power consumption in 3DOF configuration:
- Q-Mode: 260W (230V)
- Performance Mode: 280W (230V), 270W (115V)
- Heavy Duty Mode: 436W (230V), 462W (115V)
- Peak current for breaker specification in 3DOF configuration:
- Q-Mode: 5.17A (230V)
- Performance Mode: 4.55A (230V), 7.35A (115V)
- Heavy Duty Mode: 5.88A (230V), 9.89A (115V)
- Connection: USB
Even most advanced hardware is nothing without good software. Qubic Manager by Motion Systems company is professional and specialized software for the platform and is "click and play" compatible with
all major racing and flight titles on PC and constantly updated to support new applications as they are released. Gives user possibilities of motion adjustments, motion post-processing, extensive diagnostic or
easy and fast use of predefined profiles. The Qubic Manager is a powerful engine, yet it’s simple to use meaning you can adjust levels of motion, bumps, roll and pitch with a click of a button.
Qubic Manager software license is free-of-charge.
Few main features:
- Over 80+ already integrated and supported racing games and professional simulation applications.
- Included VR Headway technology uses advanced mathematic formulas to calculate necessary compensation and applies it to the VR headset at runtime. It eliminates platform movements from the VR tracking system causing your experiences to be more immersive, authentic and has huge impact on VR sickness compensation.
- The motor control algorithm has been developed to be used strictly in simulation application. The positioning signal is analyzed and preprocessed directly by the driver, so it is possible to change all driver parameters at basically zero cost (time / latency). Drivers parse the incoming command as soon as the command arrives. It also allows to append different types of vibrations (per actuator) on driver level.
- Motion sickness compensation thanks to telemetry data provided in real time directly by the game’s engine and immediately injected to the hardware to perform.
- Equipped with Tactile Audio Based Feedback System that can use tactile trans-ducers (Buttkicker) connected to a seperate sound card to generate additional effects on your cockpit (Buttkicker and additional Soundcard not included - available seperatly).
- Thanks to having full control of the technology Motion Systems company can change control algorithm source code, introduce new parameters and features without waiting for 3rd party vendors. Simple software update can introduce new features to the customers.
- Motion SDK (FSM or FSDI) for software developers is also available as an extra option. That powerful interface allows to add a motion platforms support to any application or game.
- … and many more!
- QS-220 motion set:
- 2x QS-220 - linear actuator with cup holder
- 1x QS-SB2 - power cabinet (control module)
- 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
- 1x Power cable - 1 pcs of 1,8m long cable for EU market / or 1 pcs of 2m long cable for USA market
- 2x QS brackets for mounting on aluminum profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge)
- QS-MC6 motion controller set - single unit required to control up to 4 sets of QS-220 (not included - see seperate product)

NO DELIVERY WITHOUT ACTORS PURCHASED FROM US (QS220, QS210 or CH2)
The Motion Systems - Qubic - QS-MC6 - Motion Controller is the central control unit between the QS-210/220 actuator sets or the CH2 (not included - sold separately) and the PC. One QS-MC6 motion controller can control up to 4 QS-sets.
What is included in the package:
- QS-MC6 motion controller set - single unit required to control up to 4 sets of QS-220-PL:
- 1x M10 - USB controller
- 1x QS-SBML-1 - motion lock with additional 2 m long cable
- 1x QS-MBT-1 - M-BUS terminator
- 1x USB cable - 0,5 m long cable (USB micro B)
- 1x CAT.5E patch cord cable - 2 m long

About:
The QS-CH1 is an innovative training product designed for advanced simulation of various modes of transport. Its compact design based on the technology of linear actuators makes the driver move to the virtual world with the mapping of stimuli from the real world.
Electric actuators (not included in the Base Frame Set - see seperate products) generate precise vibrations in real time and reproduce the finest details while driving – such as curves and obstacles on the racetrack. The lightweight and compact structure makes it easy to transport as well as service for multiple and variable installation.
What is included in the package:
- QS-CH1 BASE
- 1x motion floor with mounting brackets:
- 4x mounting bracket for actuators
Price does not contain peripherals like: PC computer, actuators, controllers, the cockpit set, game or simulation software, add-ons, accessories.

About:
The QS-CH2 is a 2DoF motion platform that gives the SURGE and YAW motion for even better of feeling vehicle’s traction loss, breaking and accelerating. The motion system based on world’s fastest linear actuator’s technology provides incredible levels of vehicle feedback to the driver. This motion platform is suitable for Rally, Drift, GT and F1 simulations. The platform is fully
compatible with Qubic System 3DOF actuator’s set and QS-CH1 motion cockpit.
The system in our Showroom for testing: VIDEO
Link to Video: https://www.youtube.com/watch?v=GuoGMqHqqug
Key Features:
- Based on world’s fastest Qubic System linear actuators
- Compact and lightweight design
- Suitable for Rally, Drift, GT and other racing simulations
- Supported by dedicated software QubicManager: motion adjustment, motion post-processing, extensive diagnostic or easy and fast use of predefined profiles
- Traction loss
- Also, available as expansion of QS-CH1 motion cockpit
- Proudly made in EU: Engineered, Designed and Manufactured in Poland
- QS-CH2 Motion Platform
- QubicManager software download
- USB and power cables
- Nuts and Bolts required for assembly
- Product Manual
- Price does not contain peripherals like: The Cockpit (The pictured QS-CH1 with the Qubic actuators is NOT included),PC computer, manipulators, game or simulation software, add-ons, accessories.
- Requires separate purchase of QS-MC6 (motion platform controler) if not already owned
- Production- / Shipping-Time aprox 10-14 weeks after your order.

Price does not contain peripherals like: PC computer, actuators, controllers, the cockpit set, game or simulation software, add-ons, accessories.

The Motion-Systems Qubic System - QS-BT1 Installation kit for QS-CH1 is a solution for connecting the QS-BT1 to the Next Level Racing® Motion Platform V3. Designed for a quick installation and stable connection between Motion Platform and QS-BT1 belt tensioner. Whether you are configuring new equipment or upgrading existing components, this bracket ensures a simple and hassle-free installation process.
Scope of delivery:
- Adapter set
- Set of screws

ForceSeatMI (Motion Interface) is a programming interface that allows to add a motion platform support to basically any application or a game. The ForceSeatMI does not control hardware directly – it sends all data to ForceSeatPM. This approach delegates responsibility of transforming telemetry data to a real motion from the application to ForceSeatPM.
Licence is bound to a serial number of a Motion Platform.
See more product details here

What is included in the package:
- CH2 Platform
- 4x QS-210 - linear actuator with cup holder
- 2x QS-SB2 - power cabinet (control module)
- 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
- 3x Power cable - 1 pcs of 1,8m long cable for EU market / or 1 pcs of 2m long cable for USA market
- 4x QS brackets (set of 2) for mounting on aluminum profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge)
- QS-MC6 motion controller set - single unit required to control up to 4 sets of QS (not included - see seperate product)
- BT1 Seat-Belt-Tensioner with accessories
.jpg)
What is included in the package:
- CH2 Platform
- 4x QS-220 - linear actuator with cup holder
- 2x QS-SB2 - power cabinet (control module)
- 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
- 3x Power cable - 1 pcs of 1,8m long cable for EU market / or 1 pcs of 2m long cable for USA market
- 4x QS brackets (set of 2) for mounting on aluminum profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge)
- QS-MC6 motion controller set - single unit required to control up to 4 sets of QS (not included - see seperate product)
- BT1 Seat-Belt-Tensioner with accessories

What is included in the package:
- CH2 Platform
- 4x QS-220 - linear actuator with cup holder
- 2x QS-SB2 - power cabinet (control module)
- 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
- 3x Power cable - 1 pcs of 1,8m long cable for EU market / or 1 pcs of 2m long cable for USA market
- 4x QS brackets (set of 2) for mounting on aluminum profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge)
- QS-MC6 motion controller set - single unit required to control up to 4 sets of QS (not included - see seperate product)
- BT1 Seat-Belt-Tensioner with accessories
- Force2Motion Adapter for Qubic BT1 Belt-Tensioner
- F2M-Adaptersystem FGT-Elite-Qubic
- Next Level Racing FGT Elite - Wheel Plate Edition

What is included in the package:
- CH2 Platform
- 4x QS-210 - linear actuator with cup holder
- 2x QS-SB2 - power cabinet (control module)
- 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
- 3x Power cable - 1 pcs of 1,8m long cable for EU market / or 1 pcs of 2m long cable for USA market
- 4x QS brackets (set of 2) for mounting on aluminum profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge)
- QS-MC6 motion controller set - single unit required to control up to 4 sets of QS (not included - see seperate product)
- BT1 Seat-Belt-Tensioner with accessories
- Force2Motion Adapter for Qubic BT1 Belt-Tensioner
- F2M-Adaptersystem FGT-Elite-Qubic
- Next Level Racing FGT Elite - Wheel Plate Edition