ProSimu

Force2Motion 8DOF - Motion-Simulator - Built-to-Order "The Beast"

Important note: The product Next Level Racing Traction Plus was discontinued by the manufacturer at the beginning of February 2024 completely unexpectedly and without any prior notice.
We are working on obtaining remaining stocks so that we can still equip some of our "Beast"(s) with it. Therefore, these Traction Plus systems are only available in combination with our Beast or complete systems with adapters. Please contact us for specific delivery options. And don't wait too long before you decide to buy one of these Beasts. It will be many months before we have developed a replacement for the NLR Traction Plus system ourselves.
 
The ultimate combination of Seat-Mover and Full-Motion-Cockpit with Traction Loss

Attention: Do not be put off by the price shown! This bundle contains all possible options and combinations you can choose from. The actual price will be significantly lower after your selection in the shopping cart!
 
Our innovative Force2Motion 8DOF cockpit, exclusively manufactured in this combination, combines the GTTrack cockpit with Motion Platform V3 (Seat Mover) and the Traction Plus system (for oversteer and understeer effects) from Next Level Racing with the Cockpit Mover based on the ProSimu T1000 4M. As the "cream on top", a butt kicker is mounted, which transfers the vibrations from the engine, speed limiter and curb effects tactilely into the seat and thus onto the driver's body.
 
This turns the system into the ultimate racing and/or flying cockpit with 8 DOF. This product idea arose from the idea of putting together a complete cockpit with all conceivable options for our showroom in order to show our customers the respective effects of the individual motion systems on one system. After we had gained sufficient experience with the prototype, we completely redesigned the adapter system for combining the two worlds and had it manufactured in Germany. The adapter system is so modular that it is 100% compatible with the Next Level Racing Traction Plus system and can therefore be installed as an add-on between the GTTrack cockpit and Traction Plus. The adapter system can also be used to mount other cockpits than the GTTrack on the Next Level Racing Traction Plus system. For example, there is already an aluminium plate pre-drilled for RSeat RS1 and S1 cockpits, which can of course also be used for other cockpits and do-it-yourself projects by drilling appropriate holes.
 
Fast Facts:

• Cockpit with 4DOF plus Next Level Racing Motion Platform (Seat-Mover) with 2 DOF and Traction Plus (2 DOF)
• Up to 8 actuators plus Buttkicker
• NLR GTTrack cockpit with seat adjustment
• Racing seat (standard NLR - optional at extra charge ProSimu racing shell rigid)
• Safety belts
• Option: Force2Motion adapter systems (optionally with or without mounting plate for third-party cockpits)

Force2Motion Adapter-System for NLR Traction Plus - Size L (980mm width)

• Force2Motion adapter system ("The Beast") to combine the ProSimu actuators with the Next Level Racing GTTrack cockpit and Traction Plus system
• Without Actors!

Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!

Force2Motion 4 DOF ProSimu Kit 100mm

• ProSimu actuator set with 4x 100 mm stroke and control unit and Simtools software
• WITHOUT Force2Motion adapter system ("The Beast")

Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen wrench, wrench set and socket wrench 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!

ProSimu Racing Seat

ProSimu 5M - Universal Platform (Cockpit-Mover)

• Universal Platform with 5 DOF
• to use with several cockpits (not included)
• 5 actuators (Alternatives see options)

ProSimu T5 PRO Racing Motion Simulator

Video of our Test at Prosimu in France

The T5 PRO™ was designed to meet the most demanding professionals' needs. The aim was to create a simulator with a compact size, which would be easily transportable and quick to install. Whether you are a professional driver, a leisure room or an event company, the T5 PRO™ is the simulator you need. But that's not all, the chassis' design offers incredibly fast adjustment possibilities and a whole new type of sensation.

About:

• New structure, specifically designed to handle PROSIMU® PRS200™ actuators
• 100mm PRS200™ actuators
• Traction loss system to feel the loss of grip / yaw of the vehicle
• New-generation PRS200™ actuators, with breathtaking performance (280 mm/s speed - 2G acceleration)

Compatible games:

Link to compatible games (SimTools Software)

What's included:

• T5 PRO™ chassis (screws included)
• Motion platform
• 5 actuators
• Controllers
• Cables
• With or without seat, SimuCube, steering wheel, pedals, triple screens support and monitors, keyboard and shifter support => choice required before buying (optional)
• SIMTOOLS License

Windows - PC required ! No support for Playstation, Xbox and other consoles! Software (Simtools) is included!

Attention: This is not a toy and not a ready assembled product! The offered article is a DIY-kit for a motion cockpit. For the assembly manual skill and tools (among other things ratchet set, hexagon socket wrench, fork wrench set and socket wrench 22 or 24mm) are necessary. Actuators from the industrial control system are not designed for home use are. The electrical components may only be assembled and connected by suitably qualified personnel. Operation is at the user's own risk. Make sure that no small children or pets can get near the moving parts!

The set is explicitly ordered and preconfigured for you from the manufacturer. Therefore we cannot grant you any right of withdrawl for this article. The freight costs shown also apply if the system is collected from our office. Please let us advise you before the purchase!

ProSimu T7 PRO Racing Motion Simulator

Video of our Test at Prosimu in France

About:

The T7 PRO™ simulator was designed and manufactured in France in order to meet the requirements of professional pilots for their training. The T7 PRO™ motion Simulator has 6 completely innovative degrees of freedom (6 DOF): it also simulates oversteer and understeer (rear and front traction loss) to meet the demands of pilots: to be as close to real driving. The T7 PRO™ has been designed for automotive simulation and airplane simulation; it can also be used for truck simulation, training or leisure centers (more than 100 compatible games) as well as for research and development.

In car simulation, speed and acceleration are needed to give you impact when braking and accelerating. With 280mm / s and 2G of acceleration, our simulator will give you topt sensations on the market. With 44 movements / seconds, our PRS200 ProSimu actuators allow you to feel the effects of the road and the vibrations in a very striking and realistic way. The 44 movements / second are only possible by using our high-end servo-drives fitted to the PRS 200 actuators with a high speed CanBus communication 10Mbit / s ISO 11898. The low platform height (43 cm) will allow you to have your center of gravity lower and to feel your vehicle even better.

Our simulator therefore allows you to feel the loss of traction at the rear and the front (oversteer and understeer). After three years of research and development, the patented ProSimu T7 PRO™ is the 6 degrees of freedom (6DOF) simulator with unique technology: simulation of oversteer and understeer, with the sole objective of being as close as possible to real driving.

The T7 PRO™ is the new benchmark among 6 DOF dynamic simulators thanks to the 2 additional effects of oversteer and understeer and its ProSimu PRS 200 actuators having been specially created for automotive and aeronautical simulation.

Whether you are a professional pilot, Gentlemen Driver, Sim-racer or just an enthusiast, the T7 PRO™ is the simulator for you!

Fast Facts:

• 6 DOF : Heave/Surge/Sway/Yaw/Roll/Pitch
• Effects : oversteer and understeer simulation
• 44 movements / second (no latency)
• Max speed: 280mm / s
• Maximum acceleration: 2G
• Minimum platform height: 43cm
• Travel actuators available: 100mm / 150mm / 200mm

Compatible games:

Link to compatible games (SimTools Software)

What's included:

• T7Pro™ chassis
• 7 x PRS200 ™actuators available in 100/150 / 200mm travel
• 2x Management boxes
• Management software license
• Bucket seat or without seat (compulsory choice)
• With or without seat, SimuCube, steering wheel, pedals, triple screens support and monitors, keyboard and shifter support => choice required before buying (optional)

Windows - PC required ! No support for Playstation, Xbox and other consoles! Software (Simtools) is included!

Attention: This is not a toy and not a ready assembled product! The offered article is a DIY-kit for a motion cockpit. For the assembly manual skill and tools (among other things ratchet set, hexagon socket wrench, fork wrench set and socket wrench 22 or 24mm) are necessary. Actuators from the industrial control system are not designed for home use are. The electrical components may only be assembled and connected by suitably qualified personnel. It is strongly recommended that the assembly (including delivery) is carried out by ProSimu specialists. The set-up is not trivial and requires specialised knowledge. The Prosimu crew will set up the simulator completely on site and optimise the settings. Please ask for a quote (depending on the installation location and local conditions).

Operation is at the user's own risk. Make sure that no small children or pets can get near the moving parts!

The set is explicitly ordered and preconfigured for you from the manufacturer. Therefore we cannot grant you any right of withdrawl for this article. Please let us advise you before the purchase!

ProSimu Active Seat Belt Tensioner (Option T5MP, T5Pro, T7Pro)

Video of our Test at Prosimu in France

About:

This active seat belt tensioner from ProSimu is available as an option for the ProSimu Motion Platforms/Cockpits 5MP, T5Pro and T7Pro. The belt is tightened via a separate actuator and controlled via SimTools. At 200mm/sec, the belt tensioner is very fast and provides very good feedback on the G-forces acting on the driver, especially when braking. Unlike other concepts, the Prosimu Seat Belt Tensioner tightens both belts simultaneously (i.e. not differentially).

Compatible games:

Link to compatible games (SimTools Software)

What's included:

• 4 point belts
• Actuator system incl. bracket for Prosimu cockpits
• Works with ProSimu Simtools V3
• Plug and play system.
• 110-220V
• Compatible only with PROSIMU P5MP, P7MP, T1000 5 &7 Motion, T5 Pro and T7 Pro

Windows - PC required ! No support for Playstation, Xbox and other consoles! Software (Simtools) is included!

Attention: This is not a toy and not a ready assembled product! The offered article is a DIY-kit for a motion cockpit. For the assembly manual skill and tools (among other things ratchet set, hexagon socket wrench, fork wrench set and socket wrench 22 or 24mm) are necessary. Actuators from the industrial control system are not designed for home use are. The electrical components may only be assembled and connected by suitably qualified personnel. Operation is at the user's own risk. Make sure that no small children or pets can get near the moving parts!

The set is explicitly ordered and preconfigured for you from the manufacturer. Therefore we cannot grant you any right of withdrawl for this article. The freight costs shown also apply if the system is collected from our office. Please let us advise you before the purchase!

ProSimu Hotas Warthog Support for T1000 Cockpits

ProSimu T1000 Shifter-Handbrake Bracket

• Add-on for ProSimu simulators/cockpits.
• For mounting shifter or handbrake to the T1000™ cockpit.
• Adjustable position (hangs on steering wheel arm or on both sides of the seat).
• For FANATEC SQ gear lever, handbrake or similar.
• Weight: 2 kg

• Bracket (screws included)
• Without ProSimu racing seat/simulator

ProSimu T1000 Thrustmaster Hotas Brackets

• Add-on for ProSimu simulators/cockpits.
• For mounting Thrustmaster Hotas push levers and joysticks or similar to the T1000™ cockpit.
• Adjustable position (hangs on both sides of the seat).
• Weight: 5 kg

• Bracket (screws included)
• Without ProSimu racing seat/simulator

ProSimu Shifter/Handbrake Support for T1000 Cockpits

ProSimu Monitor Stand Single - 60"