Next Level Racing Motion Platform V3 - Motion Platform Plus - Traction Plus

Next Level Racing Motion Platform V3 - Motion Platform Plus - Traction Plus
Next Level Racing Motion Platform V3 - Motion Platform Plus - Traction Plus

All good things come in threes: With the new Motion Plus Platform, Next Level Racing is expanding the Motion Eco System of the Motion Platform V3 and the Traction Plus System with a third component. Now it is also possible with the Next Level Racing systems not only to tilt the seat (Seat Mover) or to move the cockpit sideways to simulate oversteer and understeer (Cockpit Slider or Mover), but also to raise the entire cockpit. In contrast to other concepts (such as our Beast), the lifting is not realised by individual actuators (such as those of ProSimu or the Qubic system) but by one or two integrated modules that are mounted under the cockpit. The Next Level Racing cockpits GTTrack, GT- or FGT-Elite and even the FGT cockpit are supported as standard (with adapters if necessary), which until now had to remain completely outside the scope of the motion upgrade. But we will also support cockpits from other manufacturers in the future.
Next Level Racing Motion Platform V3
TOP
-17%
Next Level Racing Motion Platform V3
Next Level Racing Motion Platform V3 - WEEE-Reg.-Nr. DE 11344112

Attention: for options and accessories also see the alternative article "Next Level Racing Motion Platform V3 - KIT"!
  • Next Level Racing® V3 Motion Platform
  • Next Level Racing® Platform Manager Software (Download)
  • USB cable
  • Power cable
  • Steel side panels to directly bolt on to your Next Level Racing® GTultimate Cockpit, Next Level Flight Simulator or retrofit to your existing cockpit
  • Manual (english)
Only 2.899,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Next Level Racing Motion Platform V3 - KIT
TOP
-17%
Next Level Racing Motion Platform V3 KIT (Seat-Mover) - Details see options
Next Level Racing Motion Platform V3 KIT (Seat-Mover) - Details see options

With this article, an adapter kit for various cockpits can be optionally ordered at a preferential price. An SDK can also be added.

WEEE-Reg.-Nr. DE 11344112
  • Next Level Racing® V3 Motion Platform
  • Next Level Racing® Platform Manager Software (Download)
  • USB cable
  • Power cable
  • Steel side panels to directly bolt on to your Next Level Racing® GTultimate Cockpit, Next Level Flight Simulator or retrofit to your existing cockpit
  • Manual (english)
From only 2.899,00 EUR
incl. 19% tax excl. Shipping costs
Next Level Racing Motion Plus Platform (Cockpit-Mover)
TOP
-0%
Next Level Racing Motion Plus Platform (Cockpit-Mover)
Next Level Racing Motion Plus Platform (Cockpit-Mover)

Note: We have developed an adapter system to run two Motion Plus platforms plus a V3 on a Traction Plus system. Further information: https://www.force2motion.de/en/motion-the-beast/force2motion-adapter-system-motion-platform-plus/

All good things come in threes: With the new Motion Plus Platform, Next Level Racing is expanding the Motion Eco System of the Motion Platform V3 and the Traction Plus System with a third component. Now it is also possible with the Next Level Racing systems not only to tilt the seat (Seat Mover) or to move the cockpit sideways to simulate oversteer and understeer (Cockpit Slider or Mover), but also to raise the entire cockpit. In contrast to other concepts (such as our Beast), the lifting is not realised by individual actuators (such as those of ProSimu or the Qubic system) but by one or two integrated modules that are mounted under the cockpit. The Next Level Racing cockpits GTTrack, GT- or FGT-Elite and even the FGT cockpit are supported as standard (with adapters if necessary), which until now had to remain completely outside the scope of the motion upgrade. But we will also support cockpits from other manufacturers in the future.

Leading Features:
  • Full Cockpit Mover, simulating vehicle chassis motion with ultimate precision and accuracy
  • Market leading technology to feel bumps, corners, rolls, gear shifts and vibrations for peak immersion
  • Quick and simple installation, compatible with the Next Level Racing cockpits
  • Commercially bulit, but perfect for home use with its compact design and low noise opertaion
  • Compatible with all major racing and flight games for PC (Windows)
  • 1 Module for 2-DOF and **2 modules for 3-DOF
  • Adaotbale to the existing Next Level Racing Motion Ecosystem to continue taking racing to the next level
  • Unique pivot bar included for single unit use setups
  • Advanced VR Compensation Software to experience smooth prcise VR movement
  • Ultra-low latency provides sharp and accurate movement throughout the chassis
Only 2.989,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Force2Motion DEMO system
NEW
TOP
-50%
Force2Motion DEMO system "The little beast"
Force2Motion DEMO system "The little beast"

We need space in our showroom: That's why we have a special offer. We are selling our "little beast" with Next Level Racing Traction PLus, Next Level Racing V3 and Next Level Raing Motion Plus incl. controller, monitor stand, 55" Smart TV plus gaming PC at a special price. The system has been in use for demos in our showroom for aprox. two years and is in top condition. Incl. 2-year warranty from date of purchase for private use (1 year for commercial use).

Scope of delivery:
  • Next Level Racing Traction Plus
  • Next Level Racing Motion Plus
  • Next Level Racing Motion Platform V3
  • Next Level Racing GT Track Cockpit incl. Sitz/Gurten/Sitzschiene
  • F2M Frame for Motion Plus
  • Next Level Racing Seatz ERS1
  • Next Level Racing Elite Monitorstand QUAD
  • Gaming PC (Intel Core i5-3570 3,4 GHZ, 32 GB RAM, Windows 11, 512GB SSD, Geforce 1080 TI) fully installed with all drivers and Assetto Corsa
  • 55" Smart TV
  • Keyboardwith Trackball
  • Fanatec CSL Pedales
  • Fanatec Clubsport Wheelbase
  • Fantec Porsche Steering Wheel
The system has a new price of approx. 18,000 €. We are selling it for half that price!

Delivery with forwarding agency on pallets. Preferably self-collection (after the obligatory test drive)
Only 8.999,00 EUR
incl. 19% tax excl. Shipping costs
Next Level Racing Traction Plus
TOP
Next Level Racing Traction Plus (Cockpit-Mover)
Next Level Racing Traction Plus (Cockpit-Mover)

(see also alternative article Next Level Racing Traction Plus - KIT for options)

Breathtaking realism and performance, incredible immersion and precision, superb technology, engineering and manufacturing…introducing the Next Level Racing® Traction Plus Motion Platform.

The Traction Plus combined with the Next Level Racing® Motion Platform V3 provides incredible levels of vehicle feedback to the driver to feel exactly what the vehicle is doing by precisely delivering
  • Sway
  • Surge
  • Roll
  • Pitch
  • Understeer and front traction loss – (critical feature usually only experienced in 6DOF motion platforms)
  • Oversteer and rear traction loss
  • Power slides and drifting                                                                          
  • Partial Heave                                                                                                                                     
  • Vehicle and Road effects such as road surface, bumps, wheel lock/spin, gear changes and more
  • Shunting effects (to feel side impact contact from opponents/wall)
What’s in The Box
  • Next Level Racing® Traction Plus Motion Platform
  • Next Level Racing® Platform Manager software download
  • USB and power cables including ferrite core
  • Nuts and Bolts required for assembly
  • Product Manual
  • Adaptor plates to bolt your Next Level Racing® GTtrack or Next Level Racing® Flight Simulator Pro cockpit (coming 2019) directly to the Traction Plus platform
  • Digital assembly instructions and assembly videos available here
Compatible Products
  • Next Level Racing GTtrack
  • Next Level Racing Flight Simulator Pro (coming 2019)
  • Next Level Racing Motion Platform V3 (Traction Plus is designed to combine with the V3 motion platform to provide a ground breaking motion simulator experience)
  • Other brand or DIY cockpits - As we experienced with the Motion Platform V3, many customers also have the ability to create custom adaption to their cockpit and with the Traction Plus we expect to see the same with mounting holes on top of the platform that users can adapt to use with their own cockpit.
  • As with the Motion Platform V3 we do plan to release adaptors for other brand of cockpits
Compatible Operating System

The Platform Manager works only (!) with a Microsoft® Windows Operating System. So you will definitly need a Windows PC. No support for consoles like Xbox® or Playstation®!

Please note:
PC, V3, Cockpit, Games, Monitor, Monitorstands, Carpet, Controls etc. shown on the pictures are not included. 
5.999,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Next Level Racing Traction Plus - KIT
TOP
Next Level Racing Traction Plus KIT (Cockpit-Mover)
Next Level Racing Traction Plus KIT (Cockpit-Mover)

With this article, an adapter kit for various cockpits as well as special F2M accessories can optionally be ordered at a preferential price.

Breathtaking realism and performance, incredible¬ immersion and precision, superb technology, engineering and manufacturing…introducing the Next Level Racing® Traction Plus Motion Platform.

The Traction Plus combined with the Next Level Racing® Motion Platform V3 provides incredible levels of vehicle feedback to the driver to feel exactly what the vehicle is doing by precisely delivering
  • Sway
  • Surge
  • Roll
  • Pitch
  • Understeer and front traction loss – (critical feature usually only experienced in 6DOF motion platforms)
  • Oversteer and rear traction loss
  • Power slides and drifting                                                                          
  • Partial Heave                                                                                                                                     
  • Vehicle and Road effects such as road surface, bumps, wheel lock/spin, gear changes and more
  • Shunting effects (to feel side impact contact from opponents/wall)
What’s in The Box
  • Next Level Racing® Traction Plus Motion Platform
  • Next Level Racing® Platform Manager software download
  • USB and power cables including ferrite core
  • Nuts and Bolts required for assembly
  • Product Manual
  • Adaptor plates to bolt your Next Level Racing® GTtrack or Next Level Racing® Flight Simulator Pro cockpit (coming 2019) directly to the Traction Plus platform
  • Digital assembly instructions and assembly videos available here
Compatible Products
  • Next Level Racing GTtrack
  • Next Level Racing Flight Simulator Pro (coming 2019)
  • Next Level Racing Motion Platform V3 (Traction Plus is designed to combine with the V3 motion platform to provide a ground breaking motion simulator experience)
  • Other brand or DIY cockpits - As we experienced with the Motion Platform V3, many customers also have the ability to create custom adaption to their cockpit and with the Traction Plus we expect to see the same with mounting holes on top of the platform that users can adapt to use with their own cockpit.
  • As with the Motion Platform V3 we do plan to release adaptors for other brand of cockpits
Compatible Operating System

The Platform Manager works only (!) with a Microsoft® Windows Operating System. So you will definitly need a Windows PC. No support for consoles like Xbox® or Playstation®!

Please note:
PC, V3, Cockpit, Games, Monitor, Monitorstands, Carpet, Controls etc. shown on the pictures are not included. 
from 5.999,00 EUR
incl. 19% tax excl. Shipping costs
Next Level Racing HF8 Haptic Feedback Gaming Pad
TOP
-12%
Next Level Racing HF8 Haptic Feedback Gaming Pad
Next Level Racing HF8 Haptic Feedback Gaming Pad

Main Features
  • See it, play it, feel it with advanced haptic perception at an affordable price
  • Eight individual vibration motors for the ultimate haptic experience
  • Enhanced gaming experience on PC via Next Level Racing® HFS plug-and-play software using telemetry data
  • Suitable for game consoles with 3.5mm audio jack (headset/speakers required for Playstation users)
  • Universal design for all types of seats, including gaming, sim racing and flight seats
  • Enhanced haptic experience for gaming, as well as VR, videos and music
  • Designed for sim racing, flight sims and first-person shooters

About

Go Beyond the sounds in gaming, music, and movies - Introducing the Next Level Racing HF8- Haptic Feedback Gaming Pad. Feel the immersive haptic experience with the eight strategically placed vibration zones that are powerful and localized for precision. The Next Level Racing® HF8 is optimized for different simulation games* for a unique in-game experience. The HF8 suits all gaming chair, racing/flight seat styles, and bodies comfortably for the best user experience. The HF8 includes plug-and-play PC software to provide you a multi-channel experience without the need of additional sound cards or amplifiers.

*Localization and intensity of each motor can only be adjusted through PC use and HFS software. Console players do not require the HFS software as the eight motors will work collectively through the audio output.
 
Product Video see: https://youtu.be/J9PVxBIjRfw
 
Only 219,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Bundle Built-To-Order - Edition Traction Plus with PC
TOP
Bundle Built-To-Order - Edition Traction Plus with PC (Seat-Mover and Cockpit-Mover)
Bundle Built-To-Order - Edition Traction Plus with PC (Seat-Mover and Cockpit-Mover)

With this bundle you get a Sim-Racing-Cockpit based on the Next Level Racing Motion GTTrack with the Next Level Racing Motion Platform V3 and the Next Level Racing Traction Plus System incl. PC, keyboard and accessories, but WITHOUT monitor and controls (controller, pedals, steering wheel etc.). If a PC is included in the order, we will install all necessary drivers of the also included hardware. Please indicate in the remarks the desired installation language and if necessary the keyboard layout (German or English).

If you have any questions call (+49 (0)2405/479490) or write an e-mail (service@force2motion.de).

The bundle contains the following single items (for details on the respective items, please refer to the corresponding links of the products): Alternative configurations as well as upgrades and extensions with additional articles are possible.
13.594,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Force2Motion 8DOF - Motion-Simulator - Built-to-Order
TOP
Force2Motion 8DOF - Motion-Simulator - Built-to-Order "The Beast"
Force2Motion 8DOF - Motion-Simulator - Built-to-Order "The Beast
 
The ultimate combination of Seat-Mover and Full-Motion-Cockpit with Traction Loss

Attention: Do not be put off by the price shown! This bundle contains all possible options and combinations you can choose from. The actual price will be significantly lower after your selection in the shopping cart!
 
Our innovative Force2Motion 8DOF cockpit, exclusively manufactured in this combination, combines the GTTrack cockpit with Motion Platform V3 (Seat Mover) and the Traction Plus system (for oversteer and understeer effects) from Next Level Racing with the Cockpit Mover based on the ProSimu T1000 4M. As the "cream on top", a butt kicker is mounted, which transfers the vibrations from the engine, speed limiter and curb effects tactilely into the seat and thus onto the driver's body.
 
This turns the system into the ultimate racing and/or flying cockpit with 8 DOF. This product idea arose from the idea of putting together a complete cockpit with all conceivable options for our showroom in order to show our customers the respective effects of the individual motion systems on one system. After we had gained sufficient experience with the prototype, we completely redesigned the adapter system for combining the two worlds and had it manufactured in Germany. The adapter system is so modular that it is 100% compatible with the Next Level Racing Traction Plus system and can therefore be installed as an add-on between the GTTrack cockpit and Traction Plus. The adapter system can also be used to mount other cockpits than the GTTrack on the Next Level Racing Traction Plus system. For example, there is already an aluminium plate pre-drilled for RSeat RS1 and S1 cockpits, which can of course also be used for other cockpits and do-it-yourself projects by drilling appropriate holes.
 
Fast Facts:
  • Cockpit with 4DOF plus Next Level Racing Motion Platform (Seat-Mover) with 2 DOF and Traction Plus (2 DOF)
  • Up to 8 actuators plus Buttkicker
  • NLR GTTrack cockpit with seat adjustment
  • Racing seat (standard NLR - optional at extra charge ProSimu racing shell rigid)
  • Safety belts
  • Option: Force2Motion adapter systems (optionally with or without mounting plate for third-party cockpits)
1,00 EUR
incl. 19% tax excl. Shipping costs
Force2Motion Adapter-System RSeat-Edition S1 for NLR Traction Plus
TOP
Force2Motion Adapter-System RSeat-Edition S1 for NLR Traction Plus
Force2Motion Adapter-System RSeat-Edition S1 for NLR Traction Plus

With the Force2Motion adapter system RSeat-Edition it is possible to mount the Rseat S1 cockpit on the Traction Plus system.

Scope of delivery:
  • 2x side member for static adapter in black fine structure (SF).
  • 2x Cross member static in size R (for Rseat) in black fine structure (SF)
  • 1x Cockpit support crosswise for S1 in black fine structure (SF)
  • 2x spacer sleeves for cockpit on cross member
  • 4x sealing plugs 80x80 in black
  • All necessary screws
  • German manual
  • Without cockpit, Traction Plus System etc.
  • Weight: approx. 15 kg
Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. Assembly requires manual skills and tools (ratchet set, Allen key, open-end spanner set, etc.). When assembling the system, make sure that the total load of all components including the driver does not exceed the maximum payload of the NLR Traction Plus System of 235 kg.
1.439,00 EUR
incl. 19% tax excl. Shipping costs
Force2Motion Adapter-System RSeat-Edition N1 for NLR Traction Plus
TOP
Force2Motion Adapter-System RSeat-Edition N1 for NLR Traction Plus
Force2Motion Adapter-System RSeat-Edition N1 for NLR Traction Plus

With the Force2Motion adapter system RSeat-Edition it is possible to mount the Rseat N1 cockpit on the Traction Plus system.

Scope of delivery:
  • 2x side member for static adapter in black fine structure (SF).
  • 2x Cross member static in size R (for Rseat) in black fine structure (SF)
  • 4x sealing plugs 80x80 in black
  • All necessary screws
  • German manual
  • Without cockpit, Traction Plus System etc.
  • Weight: approx. 15 kg
Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. Assembly requires manual skills and tools (ratchet set, Allen key, open-end spanner set, etc.). When assembling the system, make sure that the total load of all components including the driver does not exceed the maximum payload of the NLR Traction Plus System of 235 kg.
1.339,00 EUR
incl. 19% tax excl. Shipping costs
Force2Motion Adapter-System RSeat-Edition RS1 for NLR Traction Plus
TOP
Force2Motion Adapter-System RSeat-Edition RS1 for NLR Traction Plus
Force2Motion Adapter-System RSeat-Edition RS1 for NLR Traction Plus

With the Force2Motion adapter system RSeat-Edition it is possible to mount the Rseat RS1 cockpit on the Traction Plus system.

Scope of delivery:
  • 2x side member for static adapter in black fine structure (SF).
  • 2x Cross member static in size R (for Rseat) in black fine structure (SF)
  • 2x Cockpit support crosswise for S1 in black fine structure (SF)
  • 4x sealing plugs 80x80 in black
  • All necessary screws
  • German manual
  • Without cockpit, Traction Plus System etc.
  • Weight: approx. 15 kg
Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. Assembly requires manual skills and tools (ratchet set, Allen key, open-end spanner set, etc.). When assembling the system, make sure that the total load of all components including the driver does not exceed the maximum payload of the NLR Traction Plus System of 235 kg.
1.489,00 EUR
incl. 19% tax excl. Shipping costs
Force2Motion Motion Platform Plus Adapter System - Base Support (bottom)
TOP
Force2Motion Motion Platform Plus Adapter System - Base Support (bottom)
Force2Motion Motion Platform Plus Adapter System - Base Support (bottom)

With the F2M adapter system Motion Platform Plus it is possible to mount one or two Motion Platform Plus on the Traction Plus. Depending on the rider's weight (75-100 kg) and the mounted cockpit, an additional V3 can then be inserted into the cockpit.
 
The system consists of a lower (mandatory) and upper (optional) carrier system. Depending on the cockpit used, the upper carrier may or may not be required. The lower carrier is called the basic set and contains the floor plates 150mm and two cross members with bracing plates for Traction-Plus mounting. These parts are not or only partially needed for the upper beam (extension set), as the Motion-Plus platforms are located at this point. The upper support can also be used on its own to extend the Wheel Stands DD and 2.0 with one or two Motion-Plus platforms and a V3 to a Motion Cockpit.

The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.

The basic carrier (below) is required for the following cockpits and motion platforms:
from 739,00 EUR
incl. 19% tax excl. Shipping costs
Force2Motion adapter system Motion Platform Plus - extension carrier (top)
TOP
Force2Motion adapter system Motion Platform Plus - extension carrier (top)
Force2Motion adapter system Motion Platform Plus - extension carrier (top)

The upper frame (F2M adapter system Motion Platform Plus extension carrier) is used to accommodate the Wheel Stands of the NLR GTTrack Cockpit or the NLR Wheel Stand DD or the NLR Wheel Stand 2.0 and, together with a V3, to form the cockpit, which can then be equipped with one or two Motion Platform Plus. If this construct is to be mounted on a Traction Plus, you will also need the F2M base support.

And the upper frame can also (alone - without the lower carrier) "transport" the NLR FGT cockpit (with and without NLR seat) to a Motion Cockpit. Here you can integrate one or two Motion Platform Plus and operate the whole thing "solo" with the original floor supports from NLR. And you can even strap the system onto a Traction Plus system. Pretty crazy, but it works.

The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.

The extension carrier (top) is needed for the following cockpits and motion platforms:
  •  NLR GTTrack Wheel Stand on Traction Plus (base adapter required)
  •  NLR Wheel Stand DD on Traction Plus (base adapter required)
  •  NLR Wheel Stand DD without Traction Plus
  •  NLR Wheel Stand 2.0 on Traction Plus (basic adapter required)
  •  NLR Wheel Stand 2.0 without Traction Plus
  •  NLR FGT Cockpit on Traction Plus (base adapter required)
  •  NLR FGT Cockpit without Traction Plus
from 479,00 EUR
incl. 19% tax excl. Shipping costs
Next Level Racing ELITE Motion Adapter Frame for Motion Platform Plus
TOP
Next Level Racing ELITE Motion Adapter Frame for Motion Platform Plus
Next Level Racing ELITE Motion Adapter Frame for Motion Platform Plus

With the Next Level Racing ELITE Motion Adapter Frame for Motion Platform Plus it is possible to combine one or two Motion Platform Plus with the Next Level Racing® Flight or the FGT Elite Simulator Cockpit.

Fast Facts
  • Designed to make the Next Level Racing® F-GT cockpit and Next Level Racing® Flight Simulators compatible with the Next Level Racing ®Motion Plus Platform or Traction Plus Platform.
  • Constructed with premium black aluminum and Carbon Steel components for strength and rigidity.
  • Can attach up to 2 Next Level Racing® Motion Platforms to the Motion Adaptor Frame
Attention: Please also note our own development for even more flexibility and compatibility: https://www.force2motion.de/en/force2motion-adapter-system-motion-platform-plus-basistraeger-unten.html

About

Introducing the Next Level Racing Motion Adaptor Frame - the ultimate solution to transform your F-GT or Flight Simulator cockpit into a Motion Plus or Traction Plus compatible setup. With the ability to choose from one to two Motion Plus options or one Traction Plus Platform configuration, this adaptor frame provides unparalleled flexibility to suit your immersive experience preferences. The solid construction of 4mm carbon steel and black anodized aluminum extrusion ensures durability and strength.

Possible configurations

Next Level Racing® F-GT Cockpit
  • 1x Next Level Racing® Motion Plus Platform
  • 2X Next Level Racing® Motion Plus Platform
  • 1X Next Level Racing® Traction Plus Platform
 Next Level Racing Flight Simulators (Including Boeing Edition)
  • 1x Next Level Racing® Motion Plus Platform
  • 2X Next Level Racing® Motion Plus Platform
  • 1X Next Level Racing® Traction Plus Platform
*Please note that using both platforms (Next Level Racing® Motion Plus Platform and Next Level Racing® Traction Plus Platform) simultaneously requires the addition of the Next Level Racing® Traction Adapter Frame.
from 299,00 EUR
incl. 19% tax excl. Shipping costs
Next Level Racing ELITE Traction Adapter Frame for Motion Platform Plus
TOP
Next Level Racing ELITE Traction Adapter Frame for Motion Platform Plus
Next Level Racing ELITE Traction Adapter Frame for Motion Platform Plus

With the Next Level Racing ELITE Traction Adapter Frame for Motion Platform Plus it is possible to combine one Motion Platform Plus with the Next Level Racing® Traction Plus System.

Fast Facts
  • Designed to make the Next Level Racing® Motion Plus Platform compatible with the Next Level Racing ® Traction Plus Platform.
  • Constructed with premium black anodized aluminum and carbon steel components for strength and rigidity.
  • Can attach the Next Level Racing® Motion Plus Platform either to the front or the rear of the frame.
Attention: Please also note our own development for even more flexibility and compatibility: https://www.force2motion.de/en/force2motion-adapter-system-motion-platform-plus-basistraeger-unten.html

About

Introducing the Next Level Racing Traction Adaptor Frame - the ultimate solution to make your Next Level Racing Motion Plus Platform compatible with the Traction Plus Platform. This specially designed adaptor frame allows for a seamless and versatile setup, with the ability to attach the Motion Plus Platform either to the front or the rear of the frame. Constructed with premium black anodized aluminum and Carbon Steel components, this adaptor frame provides superior strength and rigidity for a safe and precise simulation experience.

 
from 199,00 EUR
incl. 19% tax excl. Shipping costs
F2M Adapter System Traction Plus for Aluminium Cockpits
TOP
F2M Adapter System Traction Plus for Aluminium Cockpits
F2M Adapter System Traction Plus for Aluminium Cockpits

With the F2M adapter system Traction Plus for aluminium cockpits it is possible to mount self-made cockpits or cockpits made of aluminium profiles on the Next Level Racing Traction Plus. IMPORTANT: The cockpits must have sufficient rigidity and stability so that they CANNOT bend in the middle when resting on the mounts of the Traction Plus system. The product consists of two adapters for the Traction Plus unit (front and rear identical) and a screw set. A cockpit or the Traction Plus System is not included.
399,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Next Level Racing Motion Platform V3 incl. SDK - Bundle
TOP
Next Level Racing Motion Platform V3 incl. SDK - Bundle
Next Level Racing Motion Platform V3 incl. SDK - Bundle

Next Level Racing Motion Platform with SDK bundle (bound to serial number)

Detailed product information can be found on the manufacturer's website at http://www.nextlevelracing.com/sdk/

Attention: The software is explicitly assigned to the serial number of your Motion Platform V3. It is not possible to return the software after ordering (revocation). The Next Level Racing Traction+ is also supported. However, the V3 is always licensed and the SDK can only be used when the V3 is switched on. A single operation of the Traction Plus with the SDK is not possible.
3.678,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Next Level Racing Motion Platform V3 - Playseat Edition - Bundle
TOP
Next Level Racing Motion Platform V3 Playseat-Edition - Bundle
Next Level Racing Motion Platform V3 Playseat-Edition 
  • Next Level Racing® V3 Motion Platform
  • Next Level Racing Playseat adapter set for installation of the Motion Platform in the Playseat-Cockpits (compatible with all Playseat Evolution, Revolution, WRC and Alcantara products. Playseat Cockpit not included);
  • Next Level Racing® Platform Manager Software (Download)
  • USB cable
  • Power cable
  • Manual (english)
Playseat-Edition: Next Level Racing Motion Platform V3  incl. Playseat Adapter 
3.674,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Playseat-Adapter for Next Level Racing Motion Platform V3
TOP
Playseat-Adapter for Next Level Racing Motion Platform V3
Playseat Adapter for Next Level Racing Motion Platform V3

Scope of delivery:
  • Next Level Racing adapter set for the installation of the Motion Platform in the Playseat cockpit (cockpit not included); compatible with all Playseat Evolution, Revolution, WRC and Alcantara products.
Motion Platform and seat NOT included!
225,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Next Level Racing Motion Platform V3 - RSeat RS1 Edition - Bundle
TOP
Next Level Racing Motion Platform V3 RSeat RS1 Edition - Bundle
Next Level Racing Motion Platform V3 RSeat RS1 Edition 
  • Next Level Racing® V3 Motion Platform
  • Next Level Racing RS1 adapter set for installation of the Motion Platform in the RSeat RS1 cockpit (RSeat RS1 cockpit not included);
  • Next Level Racing® Platform Manager Software (Download)
  • USB cable
  • Power cable
  • Manual (english)

 
3.674,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
RSeat S1 - Adapter Kit for Next Level Racing Motion Platform V3
TOP
RSeat S1 - Adapter Kit for Next Level Racing Motion Platform V3
RSeat S1 - Adapter Kit for Next Level Racing Motion Platform V3

Force2Motion adapter set for the installation of the Motion Platform in the RSeat S1 cockpit incl. lifter for wheel and pedal plate as well as for a shifter extension; With the Force2Motion adapters not only the Next Level Motion Platform is inserted into the S1 cockpit, but also the geometry of the seating position is adapted to the 8-10 cm higher seat surface. For this purpose, both the wheel mount and the shifter mount (analog flight mount) are raised by about 8-10 cm. The pedal plate is lifted by 4 cm. This virtually eliminates the higher seat height due to the Motion Platform mounted between the RSeat chassis and seat. The add-on parts are black anodized and of high quality. This means that neither the appearance nor the stability of the cockpit suffers, but the seat moves!

Scope of delivery
  • Force2Motion adapter set for the installation of the Motion Platform in the RSeat S1 cockpit incl. shifter extension plate, lifter for wheel and pedal plate (RSeat S1 cockpit and NLR Motion Platform NOT included);
599,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Force2Motion RSeat N1 Adapter for Next Level Racing Motion Platform V3
TOP
Force2Motion RSeat N1 Adapter for Next Level Racing Motion Platform V3

Force2Motion RSeat N1 Adapter for Next Level Racing Motion Platform V3

What’s Included

  • Force2Motion adapter for installing the Motion Platform in the RSeat N1 cockpit (RSeat Cockpit and Motion Platform not included)
  • Manual (GERMAN)
  • Attention: Due to the approx. 8cm higher seating position, the optionally available RSeat Keyboard stand can not be used without restrictions (legroom or height is not sufficient)
549,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Next Level Racing Motion Platform V3 - Fanatec Edition - Bundle
TOP
Next Level Racing Motion Platform V3 - Fanatec-Edition - Bundle
Next Level Racing Motion Platform V3 Fanatec-Edition
  • Next Level Racing® V3 Motion Platform
  • Force2Motion adapter for installing the Motion Platform in the Fanatec cockpit (Fanatec Cockpit not included)
  • Force2Motion adapter for mounting Fanatec handbrake on Fanatec shifter when using Motion Platform (handbrake, shifter and Fanatec Clamp not included)
  • Force2Motion Fanatec Pedal-Lifter
  • Next Level Racing® Platform Manager Software (Download)
  • USB cable
  • Power cable
  • Manual (english)
Fanatec-Edition: Motion Platform V3 incl. Fanatec-Adapter!

Fanatec Cockpit not included!
4.147,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Force2Motion Fanatec Adapterset for NLR Motion Platform V3
TOP
Force2Motion Fanatec Adapterset for NLR Motion Platform V3
Force2Motion Adapterset for Next Level Racing Motion Platform V3 in Fanatec Cockpit

What’s Included

  • Force2Motion adapter for installing the Motion Platform in the Fanatec cockpit (Fanatec Cockpit and Next Level Racing® V3 Motion Platform not included)
  • Force2Motion adapter for mounting Fanatec handbrake on Fanatec shifter when using Motion Platform (handbrake, shifter and Fanatec Clamp not included)
  • Manual (German)
Fanatec Cockpit and Next Level Racing® V3 Motion Platform not included!
599,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
F2M Adapter Set V3 Motion Platform for Aluminium Cockpits
TOP
F2M Adapter Set V3 Motion Platform for Aluminium Cockpits
F2M Adapter Set V3 Motion Platform for Aluminium Cockpits

With the F2M-Adapter Motion Platform V3 for aluminium cockpits it is possible to mount the Next Level Racing Motion Platform V3 in an aluminium cockpit e.g. of Trak Racer type 80 and 160. With the 160 cockpit (160mm overall height), the longitudinal profiles of the seat mount are omitted. With the 80 cockpit these are used (to obtain the necessary height / airspace for the V3). With the 160 cockpit the seat position increases by approx. 2 cm compared to the original seat, with the 80 cockpit by approx. 10 cm. For an inside width in the aluminium cockpit of 500mm.

The set consists of two aluminium brackets in black fine structure powder-coated for the V3 with 4 clamping screws. The inside of the bracket is equipped with a sliding strip so that the surface of the aluminium profiles is protected when the V3 is moved longitudinally.

Attention: When installing, make sure that there is sufficient air space for the fans of the V3 (approx. 2 cm distance to the floor and rear wall) and that the seat and, if applicable, a mounted butt-kicker can move freely without bumping into fixed parts or producing a crushing hazard for the hands. If a static shifter mount is used in the seat's movement area, it must be shortened so that the seat can move freely in all directions (this can be supplied by Force2Motion on request - see corresponding article).

Please Note: Cockpit and V3 not included.
249,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Next Level Racing Motion Platform V3 - RaceRoom Edition 30x40x
TOP
Next Level Racing Motion Platform V3 - RaceRoom Edition 30x40x
Next Level Racing Motion Platform V3 - RaceRoom Edition 30x40x - WEEE-Reg.-Nr. DE 11344112
  • Next Level Racing® V3 Motion Platform
  • Force2Motion adapter for installing the Motion Platform in the RaceRoom cockpits (RaceRoom cockpit not included, but optionally available)
  • Force2Motion Seat-Adapter 345mm
  • Next Level Racing® Platform Manager Software (Download)
  • USB cable
  • Power cable
  • Manual (english)
Please note. When using the Next Level Racing Motion Platform, we strongly recommend using the RaceRoom Stiffener Kits and the RaceRoom Seat Adjustment.

The kit is compatible with the RaceRoom RaceRoom RR3055 and RR3033 as well as the cockpits  RR4055 and RR4027. However, RaceRoom's 5.1 sound system cannot be used without modification, as the installation space for the subwoofer under the seat is used for the motion platform! The subwoofer must be placed manually outside the cockpit!
3.848,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Next Level Racing Motion Platform V3 - RaceRoom Edition 40x
TOP
Next Level Racing Motion Platform V3 RaceRoom Edition 40x
The product has been combined with the RaceRoom Kit 30x:

https://www.force2motion.de/en/product_info.php?info=p245_.html
3.848,00 EUR
incl. 19% tax excl. Shipping costs
Next Level Racing Motion Platform SDK
TOP
Next Level Racing Motion Platform SDK
Next Level Racing Motion Platform SDK

Detailed product information can be found on the manufacturer's website at http://www.nextlevelracing.com/sdk/

Attention: The software is explicitly assigned to the serial number of your Motion Platform V3. It is not possible to return the software after ordering (revocation). The Next Level Racing Traction+ is also supported. However, the V3 is always licensed and the SDK can only be used when the V3 is switched on. A single operation of the Traction Plus with the SDK is not possible.

(Motion Platform not included)
589,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Force2Motion Seat-Adapter 345 mm for Next Level Motion Platform V3
TOP
Force2Motion Seat-Adapter 345 mm for Next Level Motion Platform V3
Force2Motion seat adapter 345mm for Next Level Motion Platform V3 - For mounting race seats on the Next Level Racing Motion Platform V3

Suitable for common racing seats with 345mm hole spacing sideways and 270mm, 273mm and 320mm longitudinal spacing (e.g., Sparco R100, Sparco Pro 2000 Floormount, OMP, RaceRoom, etc.). The seat adapter is mounted between seat or seat rail (for longitudinal adjustment) and Next Level Racing Motion Platform V3 and converts to the lateral hole spacing of 355 mm of the Motion Platform. The adjustment of the seat adjustment thus remains fully intact. By the way: The seat adapter is already included in the Next Level Motion V3 RaceRoom Edition bundle!

Dimensions: 40mm x 30mm x 4mm x 340mm aluminum black powder coated; incl. 4 pcs. M8 countersunk head screws including stop nuts and assembly instructions.
 
179,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
Force2Motion GTTrack Pedallifter
TOP
Force2Motion GTTrack Pedallifter
Force2Motion GTTrack Pedallifter

After installing the Next Level Motion Platform V3 in the GTTrack cockpit, the pedal plate may be too low in relation to the seat height for some people. We have the solution for this: With the Force2Motion GTTrack Pedallifter the pedal plate is raised by 80mm. This completely compensates for the higher seat position. The pedal lifter is made of solid aluminium and is powder coated in matt black. Plastic end caps provide a clean look. Longer screws are included.
 
69,00 EUR
incl. 19% tax excl. Shipping costs
Force2Motion - NEXT LEVEL RACING Elite Motion Adaptor Upgrade Kit
TOP
-33%
Next Level Racing Elite Motion Adaptor Upgrade Kit
Next Level Racing Elite Motion Adaptor Upgrade Kit

Leading Features
  1. Compatible with the Next Level Racing® Elite Series Cockpits, Motion Platform V3, and Traction Plus Platform 
  2. Transforms the Elite cockpit into a motion compatible simulator* 
  3. Constructed with premium Carbon Steel and Aluminium Extrusion
  4. Finished with high quality powder coating and anodised aluminium parts
  5. Pre-drilled and machined for streamline installation
About


The Next Level Racing® Elite Motion Adaptor Upgrade Kit is a sim racer’s step towards full immersion, making the Elite* cockpit compatible with the Next Level Racing® Motion V3 and Traction Plus Platform. A combination of precision CNC-machining and laser cutting manufacturing process, as well as anodised and powder coat finish, gives the Elite Motion Adaptor Upgrade Kit the same level of quality and rigidity as expected from our Elite range of simulation products. *Please check Motion Products to see if your cockpit requires the Elite Motion Adaptor Upgrade Kit as not all Elite cockpits require this add-on
Only 99,00 EUR
incl. 19% tax excl. Shipping costs
Piece:
 
1 to 32 (from a total of 33)