Force2Motion 8DOF - Motion-Simulator - The Beast - Fanatec Edition (Seat-Mover and Cockpit-Mover)

Force2Motion 8DOF - Motion-Simulator - "The Beast - Fanatec Edition" (Seat-Mover and Cockpit-Mover)
 
The ultimate combination of Seat-Mover and Full-Motion-Cockpit with Traction Loss

Attention: This is a bundle, which only consists of Cockpit and the required motion systems incl. adapter. You need an additional PC, monitor(s), pedals etc. There is a Built-To-Order article in the shop, which contains all possible options you can add or remove.
 
Our innovative Force2Motion 8DOF cockpit, exclusively manufactured in this combination, combines the Fanatec Clupsport V2 Cockpit with Motion Platform V3 (Seat Mover) and the Traction Plus system (for oversteer and understeer effects) from Next Level Racing with the Cockpit Mover based on the ProSimu T1000 4M. As the "cream on top", a butt kicker is mounted, which transfers the vibrations from the engine, speed limiter and curb effects tactilely into the seat and thus onto the driver's body.
 
This turns the system into the ultimate racing and/or flying cockpit with 8 DOF. This product idea arose from the idea of putting together a complete cockpit with all conceivable options for our showroom in order to show our customers the respective effects of the individual motion systems on one system. After we had gained sufficient experience with the prototype, we completely redesigned the adapter system for combining the two worlds and had it manufactured in Germany. The adapter system is so modular that it is 100% compatible with the Next Level Racing Traction Plus system and can therefore be installed as an add-on between the Fanatec Clupsport V2 Cockpitt and Traction Plus. The adapter system can also be used to mount other cockpits on the Next Level Racing Traction Plus system.
 
The Beast: All-In-On for testing in our showroom (see here the NLR-Version)

Fast Facts:

• Fanatec Clupsport V2 Cockpit with 4DOF plus Next Level Racing Motion Platform (Seat-Mover) with 2 DOF and Traction Plus (2 DOF)
• 8 actuators plus Buttkicker
• Fanatec Clupsport V2 Cockpit cockpit with seat adjustment and Force2Motion-Adaptersystem
• Racing seat
• Safety belts
• Force2Motion adapter systems Size X
• All necessary electronics, cables and screws including cables (power supply, signal converter USB)
• Plastic housing and steel/alu frame
• Very resistant paint (colour powder heated to 200 ° C on the structure)
• Made of square/round tubes, ultra-precise laser cutting, allows maximum rigidity.
• Compatible with many accessories and devices: Thrustmaster, Fanatec etc. (not included)
• Power supply: Standard Schuko plug 110-240V - Power consumption approx. 500 Watt
• Space requirements (footprint): length approx. 200 cm x width 120 cm (+ space for entry) x height 170 cm (upper edge of seat) - available width between actuators: 64 cm (max. cockpit width)
• Weight (without cockpit, motion platforms and controls):
  • Static adapter incl. actuator holder and screws: 9.2 kg
  • Dynamic adapter incl. screws (without actuators): 8.5 kg
  • Actuators per piece: 8,3 kg
  • Adapter plate (optional): 6.8 kg
  • The recommended driver weight is 80-100 kg (depending on the equipment of the overall cockpit - official payload of the Traction Plus System is 235 kg)
• Supported Games: Details see Simtools and Platform-Manager
  • Software is constantly updated as new games are released; Not every software title is equally well supported by every motion system.

Windows - PC required ! No support for Playstation, Xbox and other consoles! - Software (Simtools) included!
 
For details of the Next Level Motion platform see the corresponding article description
 
Attention: This is not a toy and not a ready assembled product! The offered article is a kit for a motion cockpit. For assembly, manual skills and tools (including ratchet set, Allen spanner, open-end spanner set and socket spanner 22 or 24mm) are required. For the drive, actuators from the industrial control system are used, which are not designed for home use. The installation and connection of the electrical components may only be carried out by appropriately qualified persons. Operation is at your own risk. Make absolutely sure that no small children or pets can get near the moving parts!
Observe maximum weights: The Next Level Racing Traction Plus System has a maximum payload of 235 kg. The Next Level Racing Motion Platform V3 allows a max. payload of 130 kg (incl. seat and seat-mounted accessories). Therefore, make sure that you do not exceed both values. The total weight of the cockpit depends on the accessories (controls) you have mounted and the driver's weight. Depending on the configuration, we recommend not exceeding the driver's face of 100 kg.
 
The set is explicitly ordered and preconfigured for you. Therefore we cannot grant you the right of withdrawl to this article. Please consult us before buying! The pictures partly show the prototype with optional accessories.
 
Attention: This Built-To-Order contains the following features. Certain items (such as the GTTrack cockpit, the actuators and the F2M adapter set must not be removed in order not to lose the price advantage of the bundle price! So please pay attention to the price development in the shopping cart!

• Fanatec Clupsport V2 Cockpit
• Next Level Motion Platform V3
• Next Level Traction Plus System
• Force2Motion ProSimu 4 DOF System with Force2Motion-Adapter-System Size X
• 2x Next Level Racing floor mat (Note: When using the Next Level Traction Plus System, you will need two mats!)
• Buttkicker incl. control unit and external USB sound card
• Force2Motion cable management

You can find more articles and options in the Ready2Race/Ready-To-Race single products section.


Assembly time: The complete assembly of the beast takes 2-3 days if you know what you are doing and read and understand the manual. If you don't feel like reading our manual (please download and read under "Documents" before buying) and the manuals for the individual products, have two left hands or are simply too impatient, then please use our assembly service (conditions on request) or leave the kit alone! This prevents frustration on both sides ;-) !