Cockpits

Next Level Racing® Free Standing Triple Monitor Stand

The Next Level Racing® Free Standing Triple Monitor Stand finishes off your racing simulator setup to give ultimate immersion to race like a professional. The stand supports triple screens from 32 - 65” allowing up to a huge 195” of peripheral vision for incredible realism. The stand includes both lockable wheels for easy movement and height adjustable feet, the choice is yours. The design is based on customer feedback allowing you to have your screens in the perfect position of your choice whether that is directly behind the wheel or further back from your cockpit and allowing you to change the position of the screens easily and quickly. Being completely free standing and with lockable wheels it also makes it the perfect monitor stand for events, trade shows and sim racing centers.

Leading Features

• Solid and rigid design that supports 3 x 32- 65” monitors
• Universally designed VESA mounting range to allow support for largest range of TV sizes
• Wider design allows the monitor to be placed directly behind the wheel or further away if preferred
• Lockable Castor Wheels allow portability as well as quick and easy angle adjustment of outer screens
• All forms of adjustment including angle, tilt and height

NOT RECOMMENDED for FGT and GT-Elite series or when using the Traction Plus system as the distance between the feet is too small.

Next Level Racing Challenger Simulator Cockpit

Bring the race track to your home with the Next level Racing® Challenger Simulator Cockpit. The Challenger cockpit is the perfect solution to mount your steering wheel, pedals and even shifter in an authentic racing position to give you a true race car driving experience from the comfort of your home. The minimalistic design of the Challenger cockpit provides you with a rigid and realistic racing experience without a huge footprint. The optional Next Level Racing® Lockable Castor Wheels are also compatible with the Challenger cockpit. This allows you to easily roll the cockpit into position, lock the wheels when racing and easily store away after use.

Next Level Racing® F-GT Pro Keyboard and Mouse Tray

Leading Features

• Optimized Accessibility: 125° of swivel rotation for easy entry and exit
• Reversible Mounting: Flexible left or right-side mounting to suit user preference
• Engineered for Strength: Built with Ø50mm (2") carbon steel tubing for maximum durability
• Premium Finish: Sleek matte black powder-coated finish to match your cockpit setup

About

The Next Level Racing® F-GT Pro Direct Keyboard and Mouse Tray is the perfect addition to your sim racing cockpit, providing convenient access to your peripherals without compromising your racing setup. Purpose-built for the F-GT Pro Racing Cockpit, this add-on ensures your keyboard and mouse are within reach before, during, or after your session. With a sleek matte black finish and reversible design, it enhances both function and aesthetics for any dedicated sim racer.

Engineered for functionality and comfort

With 125° of swivel rotation, the F-GT Pro Keyboard and Mouse Tray allows easy access for quick adjustments, pit stops or launching software between races. Designed with flexibility in mind, the tray can be mounted on either the left or right side of your cockpit, accommodating various user setups. Built from robust Ø50mm (2") carbon steel tubing, it offers exceptional rigidity and stability, while the matte powder-coated finish ensures it complements the look of your racing rig. Included hardware and tools make installation straightforward, allowing you to stay focused on the race.

Specifications:

• Supported Max Weight: 10 kg or 22 lbs.
• Product Dimensions: 63.6 cm (L) x 32.8 cm (W) x 15.2 cm (H) / 25 inches (L) x 12.9 inches (W) x 6.0 inches (H)
• Box Dimensions: 36.5cm (L) X 26 cm (W) X 15 cm (H) / 14.4 inches (L) x 10.2 inches (W) x 5.9 inches (H)
• Product Weight: 3.7 kg or 8.2 lbs.
• Boxed Weight – 4.7 kg or 10.4 lbs.
• Part Number – NLR-R006

What's in the box:

• Next Level Racing® F-GT Pro Direct Keyboard and Mouse Tray
• Mounting hardware
• Digital assembly instructions and assembly videos available here: https://bit.ly/nlr-instructions

Compatible Next Level Racing® Products:

• Next Level Racing® F-GT Pro Formula and GT Simulator Cockpit  

Video instructions: https://youtu.be/37SBGGnAPcg

Next Level Racing® F-GT Pro Direct Monitor Mount

Leading Features

• Wide Monitor Compatibility- Supports flat screens from 27”–43” and ultra-wide monitors up to 57”
• Strong and Rigid Frame- Built with Ø50mm premium steel tubing for unmatched durability
• VESA Mount Versatility- Compatible with VESA patterns from 75mm x 75mm to 200mm x 200mm
• Premium Matte Finish- Sleek and seamless look to complement any sim racing setup

About

Upgrade your racing setup with the Next Level Racing® F-GT Pro Direct Monitor Mount, designed to perfectly complement the F-GT Pro cockpit. Built for strength, precision, and immersive visibility, this monitor mount supports a wide range of screen sizes and ultra-wide displays, ensuring an optimal field of view for competitive sim racers. With a durable Ø50mm steel tube frame and a modern matte finish, it not only performs under pressure—it looks the part too.

Built for immersion

The F-GT Pro Direct Monitor Mount transforms your racing experience by supporting single monitors from 27” to 43” flat screens and ultra-wide monitors up to 57”. Designed to meet the needs of serious sim racers, it positions your screen directly in your line of sight for a more immersive and realistic driving feel. Compatible with VESA mounting patterns from 75mm x 75mm to 200mm x 200mm, it provides flexibility to suit a variety of monitors and user preferences.

Engineered for performance

Constructed from a robust Ø50mm steel tube frame, this mount is built to withstand the demands of high-performance simulation. Its strength ensures rock-solid stability for your monitor, even in intense racing scenarios. The premium matte finish adds a touch of sophistication while matching the aesthetic of the F-GT Pro Cockpit. With all required hardware included for mounting electronics, it’s the perfect plug-and-play solution for racers looking to complete their cockpit setup.

Specifications:

• VESA Mount Configuration: 75mm x 75mm to 200mm x 200mm
• Supported Max Weight: 50 kg or 110lbs.
• Product Dimensions: 27.7 cm (L) x 53.6 cm (W) x 71.1 cm (H) / 10.9 inches (L) x 21.1 inches (W) x 28 inches (H)
• Box Dimensions: 64 cm (L) X 59 cm (W) X 20 cm (H) / 25.2 inches (L) x 23.2 inches (W) x 7.9 inches (H)
• Product Weight: 6.3 kg or 13.9 lbs.
• Boxed Weight – 9.2 kg or 20.3 lbs.
• Part Number – NLR-R004

What's in the box:

• Next Level Racing® F-GT Pro Direct Monitor Mount
• Mounting hardware
• Digital assembly instructions and assembly videos available here: http://bit.ly/nlr-instructions

Compatible Next Level Racing® Products:

• Next Level Racing® F-GT Pro Formula and GT Simulator Cockpit  

Video instructions: https://youtu.be/stYx841OvuA

Next Level Racing® F-GT Pro Shifter And Handbrake Arm Add-On

Leading Features

• Universal Compatibility: Supports shifters and handbrakes from all major brands
• Left or Right Mounting: Universal design allows installation on either side of the cockpit
• Built for Strength: Constructed from carbon steel and a robust Ø50mm (2”) steel tube for unmatched durability
• Premium Finish: Sleek matte black finish for a premium, seamless appearance

About
Take your racing setup to the next level with the Next Level Racing® F-GT Pro Shifter and Handbrake Arm Add-on, engineered specifically for the F-GT Pro Cockpit. Whether you’re drifting, rallying, or circuit racing, this add-on gives you the freedom to mount both your shifter and handbrake with ease—right where you want them. Crafted from premium carbon steel and finished in a sleek matte black, it’s the ideal upgrade for racers seeking realism, durability, and adjustability.

Designed for Performance and Versatility

With support for leading shifter and handbrake brands, this arm add-on offers unmatched flexibility. Designed to mount on either the left or right side of your cockpit, it adapts to your racing style and preference. Built from Ø50mm (2”) steel tubing and carbon steel components, it delivers exceptional rigidity even in the most intense racing moments. The included hardware makes installation simple, ensuring you’re race-ready in no time.

Specifications:

• Supported Max Weight: 30 kg or 66 lbs.
• Product Dimensions: 44.2 cm (L) x 30.2 cm (W) x 20.8 cm (H) / 17.4 inches (L) x 11.9 inches (W) x 8.2 inches (H)
• Box Dimensions: 48cm (L) X 25 cm (W) X 13 cm (H) / 18.9 inches (L) x 9.8 inches (W) x 5.1 inches (H)
• Product Weight: 3.5 kg or 7.7 lbs.
• Boxed Weight – 4.3 kg or 9.5 lbs.
• Part Number – NLR-R005

What's in the box:

• Next Level Racing® F-GT Pro Shifter and Handbrake Arm Add-on
• Mounting hardware
• Digital assembly instructions and assembly videos available here: http://bit.ly/nlr-instructions

Compatible Next Level Racing® Products:

• Next Level Racing® F-GT Pro Formula and GT Simulator Cockpit  

Video instructions: https://youtu.be/jOIeTKzeVZ4

Next Level Racing Go Kart Plus Simulator Cockpit

Leading features:

• Designed for Go Kart style racing and general racing games
• Designed for both children and adults ranging from 110-200 cm or 3'7" – 6'7" or up to waist size 40”
• Custom-designed Go Kart style seat with included premium fabric cover
• Adjustable Seat, wheel, and pedal position to suit a wide range of users
• Compatible with a wide range of entry-level to direct drive wheels
• Included Go Kart Bumper Kit with Sticker Pack for personalization of numbers and names
• Included Next Level Racing Lockable Castor Wheels for mobility
• Compatible with wide range of wheels and pedals including Thrustmaster, Logitech, Fanatec, and Moza Racing

About:

Introducing the Next Level Racing® Go Kart Plus cockpit, designed for the whole family to enjoy hours of racing fun. Whether you’re training for competitive go-karting events or creating exciting family race days, this cockpit is built to accommodate it all. This versatile cockpit is perfect for children and adults alike, offering a thrilling racing experience for all ages. With adjustable seat angle, seat distance slider, and pedal distance knobs, choose from Go Kart positioning to GT-style racing. Its compact footprint and versatile design make it perfect for family bonding and competitive training. Get ready to experience the joy of racing together with the Next Level Racing® Go Kart Plus cockpit.
 

Next Level Racing® Floor Mat 

Perfect finish to your stand or cockpit whilst protecting your floor at the same time

 Attention: Not suitable for soft wooden floors or laminate (risk of scratching).

Next Level Racing Lockable Castor Wheels
 
Leading Features

• Turn your F-GT, FGT-Elite or Challenger into mobile cockpits
• Roll your cockpit around with ease and simply lock the wheels when racing

Motion-Systems Qubic System - QS-210 Motion System - 2DOF

About QS-210

The QS-210 2DoF motion system is designed as a more compact iteration of the Qubic System QS-220 industrial-grade linear actuators. This motion set is linear, efficient, easy to connect, and requires no maintenance. The motion system shares the same features as the linear actuators utilized in Qubic System motion cockpits, particularly the attributes of low latency time and real-time vibrations. Tailored for dedicated sim racers and drivers, the QS-210 motion system includes additional sets of brackets that enable racers to install actuators in the most popular aluminum profile based cockpits available on the global market.

Possible configurations and required add-ons:

• Attention: A QS-MC6 controller is required for operation on a Windows PC (not included) - see corresponding sets
• An additional rocker (QS pivot) is required for operation as a 2.5 DOF system (not included) - see corresponding sets
• The 2DOF system or the 2.5 DOF set can be upgraded to a 3DOF system with an additional QS-210 set (not included) - see corresponding sets

Scope of delivery QS-210 Motion System - 2DOF:

• 2 x QS-210 actuators
• Power cabinet
• 2x brackets for mounting the actuators on standard cockpits
• Screws and accessories
•  Manual

Box dimensions and weight:

• 71 cm x 53 cm x 16 cm | 27.9 in x 20.9 in x 6.3 in
• 30 kg| 66.14 lb

Motion-Systems Qubic System - QS-210-2.5DOF Motion System - Set

About QS-210

The QS-210 motion system is designed as a more compact iteration of the Qubic System QS-220 industrial-grade linear actuators. This motion set is linear, efficient, easy to connect, and requires no maintenance. The motion system shares the same features as the linear actuators utilized in Qubic System motion cockpits, particularly the attributes of low latency time and real-time vibrations. Tailored for dedicated sim racers and drivers, the QS-210 motion system includes additional sets of brackets that enable racers to install actuators in the most popular aluminum profile based cockpits available on the global market.

Automotive grade performance for your sim racing experience - proudly made in poland

The QS-210 motion system is a high-end motion set designed to deliver an ultra-realistic simracing experience. It incorporates advanced haptic feedback technology that provides precise force feedback, enhancing the sense of immersion. The system comes with dedicated software for customization and frequent updates, making it a favorite among simracing enthusiasts.

QubicManager software is free of charge and develops in house by Motion Systems engineers. QS-210 takes washout filter’s approach to signal processing and motion control to deliver the next level of immersive driving experience. Every bump, road structure, braking, accelerating and vehicle movement is captured and reproduced within 60 mm/ 2.36” of the available actuator’s stroke. Qubic System products are well-supported allowing users to stay engaged with the latest advancements in simracing technology.

60 mm actuator stroke - realism and immersion of the simulation

In sim racing, the actuator stroke refers to the range of motion or travel that a motion actuator or motion platform is capable of producing. Motion actuators are devices that are often used in sim racing setups to provide physical feedback and simulate the sensations of acceleration, braking, cornering, and other movements experienced in real-world driving.

The actuator stroke determines how far and in what directions the motion platform or seat can move. For example, it may refer to the maximum distance the seat can move forward and backward, tilt side to side, or pitch up and down. The stroke length can vary depending on the specific motion platform or simulator hardware being used. Having a sufficient actuator stroke is important in sim racing because it directly impacts the realism and immersion of the simulation. A 60 mm/2.36 in stroke allows for a wider range of motion and can provide a more accurate representation of the forces experienced in a real vehicle. This can make the driving experience in the simulator feel more authentic and responsive, enhancing the overall immersion for the sim racer.

Plug & Play - simple and hassle-free setup process

The installation of the QS-210 motion system is exceptionally straightforward. You can have it up and running within minutes. attaching the four actuators to your aluminum cockpit is a breeze, thanks to the included mounting brackets that come with the motion set. to streamline the process further, you can easily download the qubic manager software with just one click, and it’s completely free of charge. utilizing the step-by-step tutorial, you’ll effortlessly configure the system to your specific preferences. The motion system only requires a power supply of 115/230 vac. In practically no time at all, you’ll be fully prepared to engage in thrilling races.

Enhance stability - precision and customization in simracing

The QS-210 motion set equipped with dedicated brackets allowing precise customization for an immersive racing adventure. These adaptable brackets seamlessly integrate actuators into popular aluminum based cockpits, delivering unwavering stability and an exhilarating virtual racing experience.

In-house software - even most advanced hardware is nothing without good software

Qubic Manager is a in-house professional and specialized software for motion platforms. It is plug-and-play compatible with all major racing and flight titles on PC and is continually updated to support new titles as they are released. The Qubic Manager is a powerful engine, yet it’s simple to use, allowing you to easily adjust levels of motion, bumps, roll, and pitch with a click of a button. This software caters to users of all skill levels. It features an intuitive interface with clear menus and guided setup for beginners. Quick start wizards and predefined profiles simplify the initial configuration. Troubleshooting guides assist with common issues.

Advanced users benefit from an in-depth editor, scripting support, and multi-device integration capabilities. It seamlessly integrates with QS products, enhancing functionality. A vibrant online community shares tips and scripts for collaboration. This decade-developed software empowers both beginners and experts. It’s a versatile tool for enhancing productivity, automation, and control, with a strong Qubic ecosystem.

VR ready - unlocking seamless virtual reality with motion compensation

Qubic Manager software is ready to embrace virtual reality. This means that users can enjoy a complete and authentic simulation experience without integration hassles, thanks to perfect compatibility with VR technology. With Qubic System’s VR Ready software, simulations become more immersive than ever. Realistic sound effects, seamless movements, and impeccable synchronization with visual elements create unforgettable journeys in the virtual world. The entire experience becomes smooth and effortless, allowing users to focus on the sensation itself rather than technical intricacies. Qubic System redefines simulations, enabling entry into a new dimension of simulated travels through the built-in VR HeadWay 2.0 functionality.

Responsive revolution - linear actuators with a latency time of less than 8ms.

Low latency in simracing is crucial for several key reasons:

• Realism: Simracing aims to replicate real-world racing closely. Low latency ensures the virtual car responds in real-time, enhancing immersion by mimicking a real car’s responsiveness.
• Precise Control: Racing games require precise control over steering, braking, and acceleration. Low latency ensures minimal delay in translating your inputs to the game, enabling accurate and responsive control, especially in fast-paced races.
• Safety: In simracing, accidents can happen. Low latency allows quick reactions to track changes, reducing the risk of collisions or losing control.
• Competitive Advantage: Milliseconds matter in simracing competitions. Low-latency setups give drivers a competitive edge by enabling faster reactions and split-second decisions.
• Real-Time Feedback: Low latency provides immediate feedback from input devices, helping drivers understand their vehicle’s behavior and make adjustments during races.
• Consistency: Minimal delay maintains consistent lap times and performance, allowing simracers to execute precise maneuvers consistently.
• Enhanced Experience: Low latency complements high-quality hardware and software, ensuring a seamless interface and an enjoyable racing experience.
• Training and Skill Development: Simracing serves as a training tool for real-world racing. Low latency lets drivers practice and refine skills in a realistic virtual environment, translating into improved on-track performance.

Qubic ecosystem - all-in-one

The Qubic Ecosystem encompasses a collection of various products and one software to control all of the devices, even 3rd party accessories. Within this product ecosystem, a range of motion systems are created to work with one another, resulting in a seamless and integrated racing experience.

Teh QS21ß set is a perfect motion base for most aluminum profile based cockpits available on the global market (using brackets). QS-210 works also with QS-CH2 motion platform (Only as 3DOF set, not with pivot bar!).The concept of the Qubic System product and software ecosystem underscores the idea that the whole system works together synergistically to offer users enhanced value and functionality.

With Motion-Systems Qubic System - QS-Pivot to a 2.5 DOF-System

QS-Pivot is an innovative accessory designed for users seeking the intense sensations typically found in high-end simulators. When combined with QS-210 or QS-220 actuators, it creates a unique 2.5 DOF* configuration that delivers full immersion in driving simulation.

We recognize that many individuals cannot afford the one-time expense of implementing a 3DOF (4 actuators) system for their simulator. To address this, we are introducing the option to take the first step with just 2 actuators using an additional accessory: the pivot leg, which we are thrilled to add to the Qubic System lineup.

Interestingly, if the QS-PIVOT is mounted sufficiently far forward, this setup will create the impression of an additional HEAVE axis, as the motion from the PITCH axis will be so optimized that it feels like translational (vertical) motion to the human vestibular system. Thus, with just 2 actuators combined with the pivot leg, users can achieve a “2.5 DOF” sensation, which may be an excellent starting point for many enthusiasts.* Heave motion pattern combined from pitch axis.

What's included:

QS-210 2.5DOF MOTION Set consists:

• 2x – linear actuator with stabilization plates
• 2x – power cabinet (control module)
• 2x – mounting brackets (set of 2)
• 1x – motion lock cable (up-link/down-link) – 2 m long
• 1x – power cable
• QS-PIVOT
• QS-MC6 Controller Set with 1x – motion lock with additional 2 m long cable

Can be upgraded to a full 3DOF set with an additional optional QS-2102DOF set (not included)!

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Motion-Systems Qubic System - QS-210 Motion System - 3DOF Set

About QS-210

The QS-210 3DoF motion system is designed as a more compact iteration of the Qubic System QS-220 industrial-grade linear actuators. This 3DoF motion set is linear, efficient, easy to connect, and requires no maintenance. The motion system shares the same features as the linear actuators utilized in Qubic System motion cockpits, particularly the attributes of low latency time and real-time vibrations. Tailored for dedicated sim racers and drivers, the QS-210 motion system includes additional sets of brackets that enable racers to install actuators in the most popular aluminum profile based cockpits available on the global market.

Automotive grade performance for your sim racing experience - proudly made in poland

The QS-210 3DoF motion system is a high-end motion set designed to deliver an ultra-realistic simracing experience. It incorporates advanced haptic feedback technology that provides precise force feedback, enhancing the sense of immersion. The system comes with dedicated software for customization and frequent updates, making it a favorite among simracing enthusiasts.

QubicManager software is free of charge and develops in house by Motion Systems engineers. QS-210 takes washout filter’s approach to signal processing and motion control to deliver the next level of immersive driving experience. Every bump, road structure, braking, accelerating and vehicle movement is captured and reproduced within 60 mm/ 2.36” of the available actuator’s stroke. Qubic System products are well-supported allowing users to stay engaged with the latest advancements in simracing technology.

60 mm actuator stroke - realism and immersion of the simulation

In sim racing, the actuator stroke refers to the range of motion or travel that a motion actuator or motion platform is capable of producing. Motion actuators are devices that are often used in sim racing setups to provide physical feedback and simulate the sensations of acceleration, braking, cornering, and other movements experienced in real-world driving.

The actuator stroke determines how far and in what directions the motion platform or seat can move. For example, it may refer to the maximum distance the seat can move forward and backward, tilt side to side, or pitch up and down. The stroke length can vary depending on the specific motion platform or simulator hardware being used. Having a sufficient actuator stroke is important in sim racing because it directly impacts the realism and immersion of the simulation. A 60 mm/2.36 in stroke allows for a wider range of motion and can provide a more accurate representation of the forces experienced in a real vehicle. This can make the driving experience in the simulator feel more authentic and responsive, enhancing the overall immersion for the sim racer.

Plug & Play - simple and hassle-free setup process

The installation of the qs-210 motion system is exceptionally straightforward. You can have it up and running within minutes. attaching the four actuators to your aluminum cockpit is a breeze, thanks to the included mounting brackets that come with the motion set. to streamline the process further, you can easily download the qubic manager software with just one click, and it’s completely free of charge. utilizing the step-by-step tutorial, you’ll effortlessly configure the system to your specific preferences. The motion system only requires a power supply of 115/230 vac. In practically no time at all, you’ll be fully prepared to engage in thrilling races.

Enhance stability - precision and customization in simracing

The qs-210 3dof motion set equipped with dedicated brackets allowing precise customization for an immersive racing adventure. These adaptable brackets seamlessly integrate actuators into popular aluminum based cockpits, delivering unwavering stability and an exhilarating virtual racing experience.

In-house software - even most advanced hardware is nothing without good software

Qubic Manager is a in-house professional and specialized software for motion platforms. It is plug-and-play compatible with all major racing and flight titles on PC and is continually updated to support new titles as they are released. The Qubic Manager is a powerful engine, yet it’s simple to use, allowing you to easily adjust levels of motion, bumps, roll, and pitch with a click of a button. This software caters to users of all skill levels. It features an intuitive interface with clear menus and guided setup for beginners. Quick start wizards and predefined profiles simplify the initial configuration. Troubleshooting guides assist with common issues.

Advanced users benefit from an in-depth editor, scripting support, and multi-device integration capabilities. It seamlessly integrates with QS products, enhancing functionality. A vibrant online community shares tips and scripts for collaboration. This decade-developed software empowers both beginners and experts. It’s a versatile tool for enhancing productivity, automation, and control, with a strong Qubic ecosystem.

VR ready - unlocking seamless virtual reality with motion compensation

Qubic Manager software is ready to embrace virtual reality. This means that users can enjoy a complete and authentic simulation experience without integration hassles, thanks to perfect compatibility with VR technology. With Qubic System’s VR Ready software, simulations become more immersive than ever. Realistic sound effects, seamless movements, and impeccable synchronization with visual elements create unforgettable journeys in the virtual world. The entire experience becomes smooth and effortless, allowing users to focus on the sensation itself rather than technical intricacies. Qubic System redefines simulations, enabling entry into a new dimension of simulated travels through the built-in VR HeadWay 2.0 functionality.

Responsive revolution - linear actuators with a latency time of less than 8ms.

Low latency in simracing is crucial for several key reasons:

• Realism: Simracing aims to replicate real-world racing closely. Low latency ensures the virtual car responds in real-time, enhancing immersion by mimicking a real car’s responsiveness.
• Precise Control: Racing games require precise control over steering, braking, and acceleration. Low latency ensures minimal delay in translating your inputs to the game, enabling accurate and responsive control, especially in fast-paced races.
• Safety: In simracing, accidents can happen. Low latency allows quick reactions to track changes, reducing the risk of collisions or losing control.
• Competitive Advantage: Milliseconds matter in simracing competitions. Low-latency setups give drivers a competitive edge by enabling faster reactions and split-second decisions.
• Real-Time Feedback: Low latency provides immediate feedback from input devices, helping drivers understand their vehicle’s behavior and make adjustments during races.
• Consistency: Minimal delay maintains consistent lap times and performance, allowing simracers to execute precise maneuvers consistently.
• Enhanced Experience: Low latency complements high-quality hardware and software, ensuring a seamless interface and an enjoyable racing experience.
• Training and Skill Development: Simracing serves as a training tool for real-world racing. Low latency lets drivers practice and refine skills in a realistic virtual environment, translating into improved on-track performance.

Qubic ecosystem - all-in-one

The Qubic Ecosystem encompasses a collection of various products and one software to control all of the devices, even 3rd party accessories. Within this product ecosystem, a range of motion systems are created to work with one another, resulting in a seamless and integrated racing experience.

3DoF linear actutors set is a perfect motion base for QS-CH1 cockpit, and most aluminum profile based cockpits available on the global market (using brackets). QS-210 works also with QS-CH2 motion platform.The concept of the Qubic System product and software ecosystem underscores the idea that the whole system works together synergistically to offer users enhanced value and functionality.

What's included:

The QS-210 3DOF MOTION Set consists:

• 4x – QS-210 inear actuator with stabilization plates
• 2x – power cabinet (control module)
• 4x – mounting brackets (2er-Set)
• 1x – motion lock cable (up-link/down-link) – 2 m long
• 2x – power cable
• QS-MC6 Controller with 1x – Motion Lock with 2m cable

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Qubic System - QS-220 Motion System - Set with 2 Actuators and 1 Power Cabinet

About QS-220

Linear actuator technology by Motion Systems allows to develop highly realistic applications with detailed motion textures, velocity, suspension interaction feedback, engine vibrations, tactile feedback, haptic system and vehicle dynamics. Innovative technology, modular and compact design, as well as the quiet operation makes the QS-220 as a perfect motion base not only for professional application but also for home users in various types of cockpits. Additional sets of QS-220 can be configured as a 4 and 6 actuated system to provide 3 / 4 / 6 DOF using dedicated cockpits from Qubic System product line.

By using dedicated software Qubic Manager the user can use several sets to create the most realistic simulation that immediately responds to onscreen situations to deliver real life experience in gaming or VR
applications. Motion Systems is a global leading motion platforms brand for professionals and the most demanding home users. For over 10 year the company has been designing and providing bespoke motion solutions for industry and cutting edge technology for racing and flight simulation.

Fast Facts - Hardware:

Patent pending technology of QS-L1 linear actuators from Qubic System Line allows to develop highly realistic applications with detailed effects from simulation telemetry. Motor drivers have
been designed by Motion Systems company to do just one job, to control motors in vehicle simulator applications and they are exceptionally good at it.

Included power cabinet (control module) QS-SB2 is responsible for the power distribution and communication to handle telemetry signal processing where motion controller dispatches the commands
to drivers which parse the incoming command as soon as the command arrives. Control module sets the motion and vibration cues for each single actuator. The driver works with both 115V and 230V power
network without any adapters or voltage converters.

General specification of QS-220 set:

• Architecture: 2 / 3 / 4 / 6 DOF (depending on user configuration and number of modules)
• Actuator stroke: 100 mm | 3.93 in
• Maximum velocity:
  • Q-Mode (230V): 800 mm/s
  • Performance Mode (115V/230V): 400 mm/s
  • Heavy Duty Mode (115/230V): 300 mm/s
• Maximum acceleration:
  • Q-Mode (230V): 0.8G*
  • Performance Mode (115V/230V): 0.7G*
  • Heavy Duty Mode (115/230V): 0.4G*
  • *value of acceleration is limited for safety reasons.
• Recommended payload in 3DOF (2x QS-220) configuration:
  • Q-Mode: 200kg
  • Performance Mode: 250kg
  • Heavy Duty Mode: 350kg
• Maximum control frequency: 1000 Hz
• Vibrations frequency range: 0-100 Hz
• Latency: <8 ms
• Product weight: 30 kg | 66 lb
• Total length: QS-L1: 90 mm | 3.55 in, QS-SB2: 385 mm | 15.16 in
• Total width: QS-L1: 90 mm | 3.55 in, QS-SB2: 300 mm | 11.81 in
• Total height: QS-L1: 553-653 mm | 22-26 in, QS-SB2: 88 mm | 3.46 in
• Cable length (QS-L1 actuator - QS-SB2 Power cabinet): 1150mm | 45.2 in
• Power supply requirements: 115/230 VAC Single Phase
• Average power consumption in 3DOF configuration:
  • Q-Mode: 260W (230V)
  • Performance Mode: 280W (230V), 270W (115V)
  • Heavy Duty Mode: 436W (230V), 462W (115V)
• Peak current for breaker specification in 3DOF configuration:
  • Q-Mode: 5.17A (230V)
  • Performance Mode: 4.55A (230V), 7.35A (115V)
  • Heavy Duty Mode: 5.88A (230V), 9.89A (115V)
• Connection: USB

Fast Facts - Software:

Even most advanced hardware is nothing without good software. Qubic Manager by Motion Systems company is professional and specialized software for the platform and is "click and play" compatible with
all major racing and flight titles on PC and constantly updated to support new applications as they are released. Gives user possibilities of motion adjustments, motion post-processing, extensive diagnostic or
easy and fast use of predefined profiles. The Qubic Manager is a powerful engine, yet it’s simple to use meaning you can adjust levels of motion, bumps, roll and pitch with a click of a button.

Qubic Manager software license is free-of-charge.

Few main features:

• Over 80+ already integrated and supported racing games and professional simulation applications.
• Included VR Headway technology uses advanced mathematic formulas to calculate necessary compensation and applies it to the VR headset at runtime. It eliminates platform movements from the VR tracking system causing your experiences to be more immersive, authentic and has huge impact on VR sickness compensation.
• The motor control algorithm has been developed to be used strictly in simulation application. The positioning signal is analyzed and preprocessed directly by the driver, so it is possible to change all driver parameters at basically zero cost (time / latency). Drivers parse the incoming command as soon as the command arrives. It also allows to append different types of vibrations (per actuator) on driver level.
• Motion sickness compensation thanks to telemetry data provided in real time directly by the game’s engine and immediately injected to the hardware to perform.
• Equipped with Tactile Audio Based Feedback System that can use tactile trans-ducers (Buttkicker) connected to a seperate sound card to generate additional effects on your cockpit (Buttkicker and additional Soundcard not included - available seperatly).
• Thanks to having full control of the technology Motion Systems company can change control algorithm source code, introduce new parameters and features without waiting for 3rd party vendors. Simple software update can introduce new features to the customers.
• Motion SDK (FSM or FSDI) for software developers is also available as an extra option. That powerful interface allows to add a motion platforms support to any application or game.
• … and many more!

What is included in the package:

• QS-220 motion set:
  • 2x QS-220 - linear actuator with cup holder
  • 1x QS-SB2 - power cabinet (control module)
  • 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
  • 1x Power cable - 1 pcs of 1,8m long cable for EU market / or 1 pcs of 2m long cable for USA market
  • 2x QS brackets for mounting on aluminum profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge) 

What else is needed to operate the set:

• QS-MC6 motion controller set - single unit required to control up to 4 sets of QS-220 (not included - see seperate product)

Motion-Systems Qubic System - QS-220-2.5DOF Motion System - Set with 2 Aktuators and 1 Power Cabinet and Pivot-Bar

About QS-220

Linear actuator technology by Motion Systems allows to develop highly realistic applications with detailed motion textures, velocity, suspension interaction feedback, engine vibrations, tactile feedback, haptic system and vehicle dynamics. Innovative technology, modular and compact design, as well as the quiet operation makes the QS-220 as a perfect motion base not only for professional application but also for home users in various types of cockpits. Additional sets of QS-220 can be configured as a 4 and 6 actuated system to provide 3 / 4 / 6 DOF using dedicated cockpits from Qubic System product line.

By using dedicated software Qubic Manager the user can use several sets to create the most realistic simulation that immediately responds to onscreen situations to deliver real life experience in gaming or VR
applications. Motion Systems is a global leading motion platforms brand for professionals and the most demanding home users. For over 10 year the company has been designing and providing bespoke motion solutions for industry and cutting edge technology for racing and flight simulation.

Fast Facts - Hardware:

Patent pending technology of QS-L1 linear actuators from Qubic System Line allows to develop highly realistic applications with detailed effects from simulation telemetry. Motor drivers have
been designed by Motion Systems company to do just one job, to control motors in vehicle simulator applications and they are exceptionally good at it.

Included power cabinet (control module) QS-SB2 is responsible for the power distribution and communication to handle telemetry signal processing where motion controller dispatches the commands
to drivers which parse the incoming command as soon as the command arrives. Control module sets the motion and vibration cues for each single actuator. The driver works with both 115V and 230V power
network without any adapters or voltage converters.

General specification of QS-220 set:

• Architecture: 2 / 3 / 4 / 6 DOF (depending on user configuration and number of modules)
• Actuator stroke: 100 mm | 3.93 in
• Maximum velocity:
  • Q-Mode (230V): 800 mm/s
  • Performance Mode (115V/230V): 400 mm/s
  • Heavy Duty Mode (115/230V): 300 mm/s
• Maximum acceleration:
  • Q-Mode (230V): 0.8G*
  • Performance Mode (115V/230V): 0.7G*
  • Heavy Duty Mode (115/230V): 0.4G*
  • *value of acceleration is limited for safety reasons.
• Recommended payload in 3DOF (2x QS-220) configuration:
  • Q-Mode: 200kg
  • Performance Mode: 250kg
  • Heavy Duty Mode: 350kg
• Maximum control frequency: 1000 Hz
• Vibrations frequency range: 0-100 Hz
• Latency: <8 ms
• Product weight: 30 kg | 66 lb
• Total length: QS-L1: 90 mm | 3.55 in, QS-SB2: 385 mm | 15.16 in
• Total width: QS-L1: 90 mm | 3.55 in, QS-SB2: 300 mm | 11.81 in
• Total height: QS-L1: 553-653 mm | 22-26 in, QS-SB2: 88 mm | 3.46 in
• Cable length (QS-L1 actuator - QS-SB2 Power cabinet): 1150mm | 45.2 in
• Power supply requirements: 115/230 VAC Single Phase
• Average power consumption in 3DOF configuration:
  • Q-Mode: 260W (230V)
  • Performance Mode: 280W (230V), 270W (115V)
  • Heavy Duty Mode: 436W (230V), 462W (115V)
• Peak current for breaker specification in 3DOF configuration:
  • Q-Mode: 5.17A (230V)
  • Performance Mode: 4.55A (230V), 7.35A (115V)
  • Heavy Duty Mode: 5.88A (230V), 9.89A (115V)
• Connection: USB

Fast Facts - Software:

Even most advanced hardware is nothing without good software. Qubic Manager by Motion Systems company is professional and specialized software for the platform and is "click and play" compatible with
all major racing and flight titles on PC and constantly updated to support new applications as they are released. Gives user possibilities of motion adjustments, motion post-processing, extensive diagnostic or
easy and fast use of predefined profiles. The Qubic Manager is a powerful engine, yet it’s simple to use meaning you can adjust levels of motion, bumps, roll and pitch with a click of a button.

Qubic Manager software license is free-of-charge.

Few main features:

• Over 80+ already integrated and supported racing games and professional simulation applications.
• Included VR Headway technology uses advanced mathematic formulas to calculate necessary compensation and applies it to the VR headset at runtime. It eliminates platform movements from the VR tracking system causing your experiences to be more immersive, authentic and has huge impact on VR sickness compensation.
• The motor control algorithm has been developed to be used strictly in simulation application. The positioning signal is analyzed and preprocessed directly by the driver, so it is possible to change all driver parameters at basically zero cost (time / latency). Drivers parse the incoming command as soon as the command arrives. It also allows to append different types of vibrations (per actuator) on driver level.
• Motion sickness compensation thanks to telemetry data provided in real time directly by the game’s engine and immediately injected to the hardware to perform.
• Equipped with Tactile Audio Based Feedback System that can use tactile trans-ducers (Buttkicker) connected to a seperate sound card to generate additional effects on your cockpit (Buttkicker and additional Soundcard not included - available seperatly).
• Thanks to having full control of the technology Motion Systems company can change control algorithm source code, introduce new parameters and features without waiting for 3rd party vendors. Simple software update can introduce new features to the customers.
• Motion SDK (FSM or FSDI) for software developers is also available as an extra option. That powerful interface allows to add a motion platforms support to any application or game.
• … and many more!

 

With Motion-Systems Qubic System - QS-Pivot to a 2.5 DOF-System

QS-Pivot is an innovative accessory designed for users seeking the intense sensations typically found in high-end simulators. When combined with QS-210 or QS-220 actuators, it creates a unique 2.5 DOF* configuration that delivers full immersion in driving simulation.

We recognize that many individuals cannot afford the one-time expense of implementing a 3DOF (4 actuators) system for their simulator. To address this, we are introducing the option to take the first step with just 2 actuators using an additional accessory: the pivot leg, which we are thrilled to add to the Qubic System lineup.

Interestingly, if the QS-PIVOT is mounted sufficiently far forward, this setup will create the impression of an additional HEAVE axis, as the motion from the PITCH axis will be so optimized that it feels like translational (vertical) motion to the human vestibular system. Thus, with just 2 actuators combined with the pivot leg, users can achieve a “2.5 DOF” sensation, which may be an excellent starting point for many enthusiasts.* Heave motion pattern combined from pitch axis.

What's included:

QS-220 2.5DOF MOTION Set consists:

• 2x – linear actuator QS 220 with stabilization plates
• 2x – power cabinet (control module)
• 2x – mounting brackets (set of 2)
• 1x – motion lock cable (up-link/down-link) – 2 m long
• 1x – power cable
• QS-PIVOT
• QS-MC6 Controller Set with 1x – motion lock with additional 2 m long cable

Can be upgraded to a full 3DOF set with an additional optional QS-220-2DOF set (not included)!

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Motion-Systems Qubic System - CH2-210.3DOF.BT1 Ready2Race-Bundle

What is included in the package:

• CH2 Platform
• 4x QS-210 - linear actuator with cup holder
• 2x QS-SB2 - power cabinet (control module)
• 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
• 3x Power cable - 1 pcs of 1,8m long cable for EU market
• 4x QS brackets (set of 2) for mounting on aluminium profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge) 
• QS-MC6 motion controller set - single unit required to control up to 4 sets of QS (not included - see separate product)
• BT1 Seat-Belt-Tensioner with accessories

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Motion-Systems Qubic System - CH2-220.3DOF.BT1 Ready2Race-Bundle

What is included in the package:

• CH2 Platform
• 4x QS-220 - linear actuator with cup holder
• 2x QS-SB2 - power cabinet (control module)
• 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
• 3x Power cable - 1 pcs of 1,8m long cable for EU market / or 1 pcs of 2m long cable for USA market
• 4x QS brackets (set of 2) for mounting on aluminium profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge) 
• QS-MC6 motion controller set - single unit required to control up to 4 sets of QS (not included - see separate product)
• BT1 Seat-Belt-Tensioner with accessories

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Motion-Systems Qubic System - CH2.220.3DOF.BT1.FGT.SET Ready2Race-Bundle

What is included in the package:

• CH2 Platform
• 4x QS-220 - linear actuator with cup holder
• 2x QS-SB2 - power cabinet (control module)
• 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
• 3x Power cable - 1 pcs of 1,8m long cable for EU market
• 4x QS brackets (set of 2) for mounting on aluminum profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge) 
• QS-MC6 motion controller set - single unit required to control up to 4 sets of QS (not included - see separate product)
• BT1 Seat-Belt-Tensioner with accessories
• Force2Motion Adapter for Qubic BT1 Belt-Tensioner
• F2M-Adaptersystem FGT-Elite-Qubic
• Next Level Racing FGT 160 - Wheel Plate Edition

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Motion-Systems Qubic System - CH2.210.3DOF.BT1.FGT.SET Ready2Race-Bundle

What is included in the package:

• CH2 Platform
• 4x QS-210 - linear actuator with cup holder
• 2x QS-SB2 - power cabinet (control module)
• 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
• 3x Power cable - 1 pcs of 1,8m long cable for EU market
• 4x QS brackets (set of 2) for mounting on aluminum profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge) 
• QS-MC6 motion controller set - single unit required to control up to 4 sets of QS (not included - see separate product)
• BT1 Seat-Belt-Tensioner with accessories
• Force2Motion Adapter for Qubic BT1 Belt-Tensioner
• F2M-Adaptersystem FGT-Elite-Qubic
• Next Level Racing FGT 160 - Wheel Plate Edition

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Motion-Systems Qubic System - QS-220-3DOF Motion System - 3 DOF Set - Set with 4 Actuators, 2 Power Cabinet, 4x Brackets and 1x MC6 Controller

About QS-220

Linear actuator technology by Motion Systems allows to develop highly realistic applications with detailed motion textures, velocity, suspension interaction feedback, engine vibrations, tactile feedback, haptic system and vehicle dynamics. Innovative technology, modular and compact design, as well as the quiet operation makes the QS-220 as a perfect motion base not only for professional application but also for home users in various types of cockpits. Additional sets of QS-220 can be configured as a 4 and 6 actuated system to provide 3 / 4 / 6 DOF using dedicated cockpits from Qubic System product line.

By using dedicated software Qubic Manager the user can use several sets to create the most realistic simulation that immediately responds to onscreen situations to deliver real life experience in gaming or VR
applications. Motion Systems is a global leading motion platforms brand for professionals and the most demanding home users. For over 10 year the company has been designing and providing bespoke motion solutions for industry and cutting edge technology for racing and flight simulation.

Fast Facts - Hardware:

Patent pending technology of QS-L1 linear actuators from Qubic System Line allows to develop highly realistic applications with detailed effects from simulation telemetry. Motor drivers have
been designed by Motion Systems company to do just one job, to control motors in vehicle simulator applications and they are exceptionally good at it.

Included power cabinet (control module) QS-SB2 is responsible for the power distribution and communication to handle telemetry signal processing where motion controller dispatches the commands
to drivers which parse the incoming command as soon as the command arrives. Control module sets the motion and vibration cues for each single actuator. The driver works with both 115V and 230V power
network without any adapters or voltage converters.

General specification of QS-220 set:

• Architecture: 2 / 3 / 4 / 6 DOF (depending on user configuration and number of modules)
• Actuator stroke: 100 mm | 3.93 in
• Maximum velocity:
  • Q-Mode (230V): 800 mm/s
  • Performance Mode (115V/230V): 400 mm/s
  • Heavy Duty Mode (115/230V): 300 mm/s
• Maximum acceleration:
  • Q-Mode (230V): 0.8G*
  • Performance Mode (115V/230V): 0.7G*
  • Heavy Duty Mode (115/230V): 0.4G*
  • *value of acceleration is limited for safety reasons.
• Recommended payload in 3DOF (2x QS-220) configuration:
  • Q-Mode: 200kg
  • Performance Mode: 250kg
  • Heavy Duty Mode: 350kg
• Maximum control frequency: 1000 Hz
• Vibrations frequency range: 0-100 Hz
• Latency: <8 ms
• Product weight: 30 kg | 66 lb
• Total length: QS-L1: 90 mm | 3.55 in, QS-SB2: 385 mm | 15.16 in
• Total width: QS-L1: 90 mm | 3.55 in, QS-SB2: 300 mm | 11.81 in
• Total height: QS-L1: 553-653 mm | 22-26 in, QS-SB2: 88 mm | 3.46 in
• Cable length (QS-L1 actuator - QS-SB2 Power cabinet): 1150mm | 45.2 in
• Power supply requirements: 115/230 VAC Single Phase
• Average power consumption in 3DOF configuration:
  • Q-Mode: 260W (230V)
  • Performance Mode: 280W (230V), 270W (115V)
  • Heavy Duty Mode: 436W (230V), 462W (115V)
• Peak current for breaker specification in 3DOF configuration:
  • Q-Mode: 5.17A (230V)
  • Performance Mode: 4.55A (230V), 7.35A (115V)
  • Heavy Duty Mode: 5.88A (230V), 9.89A (115V)
• Connection: USB

Fast Facts - Software:

Even most advanced hardware is nothing without good software. Qubic Manager by Motion Systems company is professional and specialized software for the platform and is "click and play" compatible with
all major racing and flight titles on PC and constantly updated to support new applications as they are released. Gives user possibilities of motion adjustments, motion post-processing, extensive diagnostic or
easy and fast use of predefined profiles. The Qubic Manager is a powerful engine, yet it’s simple to use meaning you can adjust levels of motion, bumps, roll and pitch with a click of a button.

Qubic Manager software license is free-of-charge.

Few main features:

• Over 80+ already integrated and supported racing games and professional simulation applications.
• Included VR Headway technology uses advanced mathematic formulas to calculate necessary compensation and applies it to the VR headset at runtime. It eliminates platform movements from the VR tracking system causing your experiences to be more immersive, authentic and has huge impact on VR sickness compensation.
• The motor control algorithm has been developed to be used strictly in simulation application. The positioning signal is analyzed and preprocessed directly by the driver, so it is possible to change all driver parameters at basically zero cost (time / latency). Drivers parse the incoming command as soon as the command arrives. It also allows to append different types of vibrations (per actuator) on driver level.
• Motion sickness compensation thanks to telemetry data provided in real time directly by the game’s engine and immediately injected to the hardware to perform.
• Equipped with Tactile Audio Based Feedback System that can use tactile trans-ducers (Buttkicker) connected to a seperate sound card to generate additional effects on your cockpit (Buttkicker and additional Soundcard not included - available seperatly).
• Thanks to having full control of the technology Motion Systems company can change control algorithm source code, introduce new parameters and features without waiting for 3rd party vendors. Simple software update can introduce new features to the customers.
• Motion SDK (FSM or FSDI) for software developers is also available as an extra option. That powerful interface allows to add a motion platforms support to any application or game.
• … and many more!

What is included in the package:

• QS-220 3DOF motion set:
  • 4x QS-220 - linear actuator with cup holder
  • 2x QS-SB2 - power cabinet (control module)
  • 1x QS-SBML-2 - motion lock cable (up-link/down-link) - 2 m long
  • QS-MC6 motion controller set - single unit required to control up to 4 sets of QS-220 and one CH2
  • 2x Power cable - 1 pcs of 1,8m long cable for EU market / or 1 pcs of 2m long cable for USA market
  • 4x QS brackets for mounting on aluminum profile cockpits (Note: For mounting an FGT cockpit or similar, please also consider the specially widened F2M brackets as an option for an additional charge) 

Attention: Special price as a package! If you remove individual mandatory components of the package in the shopping cart, you may lose the price advantage. Therefore, please pay close attention to the prices in the shopping cart!

Qubic System - QS-MC6 – Motion Controller

NO DELIVERY WITHOUT ACTORS PURCHASED FROM US (QS220, QS210 or CH2)

The Motion Systems - Qubic - QS-MC6 - Motion Controller is the central control unit between the QS-210/220 actuator sets or the CH2 (not included - sold separately) and the PC. One QS-MC6 motion controller can control up to 4 QS-sets.

What is included in the package:

• QS-MC6 motion controller set - single unit required to control up to 4 sets of QS-220-PL:
  • 1x M10 - USB controller
  • 1x QS-SBML-1 - motion lock with additional 2 m long cable
  • 1x QS-MBT-1 - M-BUS terminator
  • 1x USB cable - 0,5 m long cable (USB micro B)
  • 1x CAT.5E patch cord cable - 2 m long

Motion-Systems Qubic System - QS-Pivot

About

Scope of delivery QS-PIVOT:

• 1x QS-PIVOT-Bar
• Screws
• Manual

Actuators NOT included!l

Motion-Systems Qubic System - Motion Lock for Seat Belt Tensioner

Emergency stop switch (Motion Lock) - recommended Option for Seat Belt Tensioner Qubic BT1
(not required if other Qubic systems are present, as the system can be controlled via an (existing) motion lock switch)

Motion-Systems Qubic System - QS-BT1 to Next Level Racing® Motion Platform V3 Installation Kit

The QS-BT1 to Next Level Racing® Motion Platform V3 Installation Kit is a solution for connecting the QS-BT1 to the Next Level Racing® Motion Platform V3. Designed for a quick installation and stable connection between Motion Platform and QS-BT1 belt tensioner. Whether you are configuring new equipment or upgrading existing components, this bracket ensures a simple and hassle-free installation process.

Scope of delivery:

• Adapter set
• Set of screws

Please note: BT1 Belt-Tensioner, Cockpit etc. are NOT included.

Note: As this adapter is fitted directly to the V3, the use of a seat slider is not possible or only possible to a limited extent. The seat shifts in relation to the rigidly mounted BT1, which can lead to undesirable effects. Furthermore, no Buttkicker Gamer can be installed on the V3. There is a solution for both problems: If a seat slider is installed, we recommend using the F2M seat slider: Force2Motion adapter for Qubic BT1 Belt-Tensioner to NLR Motion Platform V3 Motion Platform V3

Motion-Systems Qubic System - QS-BT1 Installation kit for QS-S25

The Motion-Systems Qubic System - QS-BT1 Installation kit for QS-S25 is a solution for connecting the QS-BT1 to the Next Level Racing® Motion Platform V3. Designed for a quick installation and stable connection between Motion Platform and QS-BT1 belt tensioner. Whether you are configuring new equipment or upgrading existing components, this bracket ensures a simple and hassle-free installation process.

Scope of delivery:

• Adapter set
• Set of screws

Please note: BT1 Belt-Tensioner, Cockpit etc. are NOT included.

Motion-Systems Qubic System - QS-BT1 Installation kit for QS-CH1

The Motion-Systems Qubic System - QS-BT1 Installation kit for QS-CH1 is a solution for connecting the QS-BT1 to the Next Level Racing® Motion Platform V3. Designed for a quick installation and stable connection between Motion Platform and QS-BT1 belt tensioner. Whether you are configuring new equipment or upgrading existing components, this bracket ensures a simple and hassle-free installation process.

Scope of delivery:

• Adapter set
• Set of screws

Please note: BT1 Belt-Tensioner, Cockpit etc. are NOT included.

Motion-Systems Qubic System - QS-BT1 Installation kit for QS-V20

The Motion-Systems Qubic System - QS-BT1 Installation kit for QS-V20 is a solution for connecting the QS-BT1 to the Next Level Racing® Motion Platform V3. Designed for a quick installation and stable connection between Motion Platform and QS-BT1 belt tensioner. Whether you are configuring new equipment or upgrading existing components, this bracket ensures a simple and hassle-free installation process.

Scope of delivery:

• Adapter set
• Set of screws

Please note: BT1 Belt-Tensioner, Cockpit etc. are NOT included.

Qubic System - QS-V20 Full-Motion-Cockpit

About

The QS-V20 is designed for customers looking for the most realistic simulation. The unique combination of high-performance linear actuator's technology developed by Motion Systems and modern, adjustable accessories allows users to train and experience real racing and flight simulation. The QS-V20 provides an amazing impression to get the feeling of driving a real racing car by delivering sensation of road textures, velocity, suspension interaction feedback, engine vibrations, tactile feedback, haptic system and vehicle dynamics.

Innovative technology, modular and compact design, as well as the quiet operation makes the QS-V20 a perfect motion base not only for professional application but also for home users.
By using dedicated software Qubic Manager the driver / pilot can use several sets to create the most realistic simulation that immediately responds to onscreen situations to deliver real life experience in gaming or VR applications. Qubic Manager contains world-class motion cueing system with integrated "washout filters" to reflect the situation from virtual environment, closing the gap between simulation and reality.

QS-V20 motion platform key features
 

• 4DOF motion system with TRACTION LOSS (heave, roll, pitch and yaw).
• Incredible oversteering feedback sensation.
• Patent pending linear actuators technology guarantee very quiet and precise operation.
• World-class advanced motion cueing system with integrated "washout filters" to reflect the situation from virtual environment, closing the gap between simulation and reality.
• Effective motions and vibrations that perfectly reflect the situations in the selected game or simulation application.
• Comfortable and ergonomic position for the driver / pilot.
• Full support of the proprietary Qubic Manager software - totally free access, no fees at any participation period.
• Compact design and small footprint fits to the medium size gaming rooms, VR centres, training facilities or even home location.
• More responsive and fast-moving way to push telemetry data from simulation to the hardware.
• VR HeadWay technology support (motion compensation).
• Engineered, Designed and Manufactured in Poland/EU.

Qubic System - QS-S25 Base-Set 6DOF

About:

The QS-S25 is an advanced motion cockpit, designed for the most demanding racers who are looking for a professional simulation experience on high top level. The motion system based on patent pending linear actuator’s technology allows a much stronger sensation range such as under steer, loss of grip or overloading during brake clearly blurring the difference between reality and virtual environment. Due to the combination of dedicated accessories and the QubicManager software, the 6DoF motion platform provides drivers with an extreme experience like in a real race or during the ultimate flights.

The QS-S25 consist of 6 degrees of freedom (surge, sway, heave roll, pitch and yaw) which determined a position and movement of a car. The combination of the high precision technology of the motion system with QubicManager functionalities guarantees perfectly reflect the situations in the selected game. Further the impressive dynamics and high performance of QS-S25 motion system means that the racing simulation has never been at such a top high.

The original machine’s design based on modular and reconfigurable sets of actuators can be used in various racing or flight applications. Compact design and small footprint fits to the medium size gaming rooms, VR centers, and training facilities for professional drivers and -of course: in the private man cave.

The platform is compatible with the selected Virtual Reality headsets on the market, which makes QS-S25 open to a new possibility in combining technologies. QubicManager uses advanced mathematic formulas to calculate necessary compensation and applies it to the VR headset at runtime. It eliminates platform motions from the VR tracking system, causing your experiences to be more immersive and authentic.

Qubic System - QS-Bracket

The universal brackets for Qubic System actuators and 3rd party racing cockpits. The QS brackets have a hole spacing that fits the most common simracing cockpits on the market.

Scope of delivery:
1 bracket - consisting of a left and right half-shell - For a complete set of 4 actuators you need 4 of these parts