Next Level Racing Motion Platform V3 - Motion Platform Plus - Traction Plus

Next Level Racing Motion Platform V3 - WEEE-Reg.-Nr. DE 11344112

Attention: for options and accessories also see the alternative article "Next Level Racing Motion Platform V3 - KIT"!

• Next Level Racing® V3 Motion Platform
• Next Level Racing® Platform Manager Software (Download)
• USB cable
• Power cable
• Steel side panels to directly bolt on to your Next Level Racing® GTultimate Cockpit, Next Level Flight Simulator or retrofit to your existing cockpit
• Manual (english)

Next Level Racing Motion Platform V3 KIT (Seat-Mover) - Details see options

Delivery time: The product is currently not available due to delivery problems with essential components. The next production batch has been announced for June 2024. It is strongly recommended to pre-order devices now, as it is expected that stocks will be sold in a very short time if available. In this case, we will accept an order without immediate payment (please select prepayment and specify "Payment on availability" in the order notes). As soon as the devices are available again, customers who have placed a pre-order will receive a corresponding message with a request for payment (incl. PayPal link). The pre-order only becomes binding once payment has been made.

With this article, an adapter kit for various cockpits can be optionally ordered at a preferential price. An SDK can also be added.

WEEE-Reg.-Nr. DE 11344112

• Next Level Racing® V3 Motion Platform
• Next Level Racing® Platform Manager Software (Download)
• USB cable
• Power cable
• Steel side panels to directly bolt on to your Next Level Racing® GTultimate Cockpit, Next Level Flight Simulator or retrofit to your existing cockpit
• Manual (english)

Next Level Racing Motion Plus Platform (Cockpit-Mover)

Note: We have developed an adapter system to run two Motion Plus platforms plus a V3 on a Traction Plus system. Further information: https://www.force2motion.de/en/motion-the-beast/force2motion-adapter-system-motion-platform-plus/

All good things come in threes: With the new Motion Plus Platform, Next Level Racing is expanding the Motion Eco System of the Motion Platform V3 and the Traction Plus System with a third component. Now it is also possible with the Next Level Racing systems not only to tilt the seat (Seat Mover) or to move the cockpit sideways to simulate oversteer and understeer (Cockpit Slider or Mover), but also to raise the entire cockpit. In contrast to other concepts (such as our Beast), the lifting is not realised by individual actuators (such as those of ProSimu or the Qubic system) but by one or two integrated modules that are mounted under the cockpit. The Next Level Racing cockpits GTTrack, GT- or FGT-Elite and even the FGT cockpit are supported as standard (with adapters if necessary), which until now had to remain completely outside the scope of the motion upgrade. But we will also support cockpits from other manufacturers in the future.

Leading Features:

• Full Cockpit Mover, simulating vehicle chassis motion with ultimate precision and accuracy
• Market leading technology to feel bumps, corners, rolls, gear shifts and vibrations for peak immersion
• Quick and simple installation, compatible with the Next Level Racing cockpits
• Commercially bulit, but perfect for home use with its compact design and low noise opertaion
• Compatible with all major racing and flight games for PC (Windows)
• 1 Module for 2-DOF and **2 modules for 3-DOF
• Adaotbale to the existing Next Level Racing Motion Ecosystem to continue taking racing to the next level
• Unique pivot bar included for single unit use setups
• Advanced VR Compensation Software to experience smooth prcise VR movement
• Ultra-low latency provides sharp and accurate movement throughout the chassis

Next Level Racing Traction Plus (Cockpit-Mover)

Important note: The product Next Level Racing Traction Plus was discontinued by the manufacturer at the beginning of February 2024. We still have remaining stock to be able to equip some of our "Beast"(s) with it. Therefore, these Traction Plus systems are only available in combination with our Beast or complete systems with adapters. Please contact us for specific delivery options. And don't wait too long before deciding to buy one of these Beasts.

(see also alternative article Next Level Racing Traction Plus - KIT for options)

Breathtaking realism and performance, incredible immersion and precision, superb technology, engineering and manufacturing…introducing the Next Level Racing® Traction Plus Motion Platform.

The Traction Plus combined with the Next Level Racing® Motion Platform V3 provides incredible levels of vehicle feedback to the driver to feel exactly what the vehicle is doing by precisely delivering

• Sway
• Surge
• Roll
• Pitch
• Understeer and front traction loss – (critical feature usually only experienced in 6DOF motion platforms)
• Oversteer and rear traction loss
• Power slides and drifting                                                                          
• Partial Heave                                                                                                                                     
• Vehicle and Road effects such as road surface, bumps, wheel lock/spin, gear changes and more
• Shunting effects (to feel side impact contact from opponents/wall)

What’s in The Box

• Next Level Racing® Traction Plus Motion Platform
• Next Level Racing® Platform Manager software download
• USB and power cables including ferrite core
• Nuts and Bolts required for assembly
• Product Manual
• Adaptor plates to bolt your Next Level Racing® GTtrack or Next Level Racing® Flight Simulator Pro cockpit (coming 2019) directly to the Traction Plus platform
• Digital assembly instructions and assembly videos available here

Compatible Products

• Next Level Racing GTtrack
• Next Level Racing Flight Simulator Pro (coming 2019)
• Next Level Racing Motion Platform V3 (Traction Plus is designed to combine with the V3 motion platform to provide a ground breaking motion simulator experience)
• Other brand or DIY cockpits - As we experienced with the Motion Platform V3, many customers also have the ability to create custom adaption to their cockpit and with the Traction Plus we expect to see the same with mounting holes on top of the platform that users can adapt to use with their own cockpit.
• As with the Motion Platform V3 we do plan to release adaptors for other brand of cockpits

Compatible Operating System

The Platform Manager works only (!) with a Microsoft® Windows Operating System. So you will definitly need a Windows PC. No support for consoles like Xbox® or Playstation®!

Please note:
PC, V3, Cockpit, Games, Monitor, Monitorstands, Carpet, Controls etc. shown on the pictures are not included. 

Next Level Racing Traction Plus KIT (Cockpit-Mover)

Important note: The product Next Level Racing Traction Plus was discontinued by the manufacturer at the beginning of February 2024. We still have remaining stock to be able to equip some of our "Beast"(s) with it. Therefore, these Traction Plus systems are only available in combination with our Beast or complete systems with adapters. Please contact us for specific delivery options. And don't wait too long before deciding to buy one of these Beasts.

With this article, an adapter kit for various cockpits as well as special F2M accessories can optionally be ordered at a preferential price.

Breathtaking realism and performance, incredible¬ immersion and precision, superb technology, engineering and manufacturing…introducing the Next Level Racing® Traction Plus Motion Platform.

The Traction Plus combined with the Next Level Racing® Motion Platform V3 provides incredible levels of vehicle feedback to the driver to feel exactly what the vehicle is doing by precisely delivering

• Sway
• Surge
• Roll
• Pitch
• Understeer and front traction loss – (critical feature usually only experienced in 6DOF motion platforms)
• Oversteer and rear traction loss
• Power slides and drifting                                                                          
• Partial Heave                                                                                                                                     
• Vehicle and Road effects such as road surface, bumps, wheel lock/spin, gear changes and more
• Shunting effects (to feel side impact contact from opponents/wall)

What’s in The Box

• Next Level Racing® Traction Plus Motion Platform
• Next Level Racing® Platform Manager software download
• USB and power cables including ferrite core
• Nuts and Bolts required for assembly
• Product Manual
• Adaptor plates to bolt your Next Level Racing® GTtrack or Next Level Racing® Flight Simulator Pro cockpit (coming 2019) directly to the Traction Plus platform
• Digital assembly instructions and assembly videos available here

Compatible Products

• Next Level Racing GTtrack
• Next Level Racing Flight Simulator Pro (coming 2019)
• Next Level Racing Motion Platform V3 (Traction Plus is designed to combine with the V3 motion platform to provide a ground breaking motion simulator experience)
• Other brand or DIY cockpits - As we experienced with the Motion Platform V3, many customers also have the ability to create custom adaption to their cockpit and with the Traction Plus we expect to see the same with mounting holes on top of the platform that users can adapt to use with their own cockpit.
• As with the Motion Platform V3 we do plan to release adaptors for other brand of cockpits

Compatible Operating System

The Platform Manager works only (!) with a Microsoft® Windows Operating System. So you will definitly need a Windows PC. No support for consoles like Xbox® or Playstation®!

Please note:
PC, V3, Cockpit, Games, Monitor, Monitorstands, Carpet, Controls etc. shown on the pictures are not included. 

Next Level Racing HF8 Haptic Feedback Gaming Pad

Main Features

• See it, play it, feel it with advanced haptic perception at an affordable price
• Eight individual vibration motors for the ultimate haptic experience
• Enhanced gaming experience on PC via Next Level Racing® HFS plug-and-play software using telemetry data
• Suitable for game consoles with 3.5mm audio jack (headset/speakers required for Playstation users)
• Universal design for all types of seats, including gaming, sim racing and flight seats
• Enhanced haptic experience for gaming, as well as VR, videos and music
• Designed for sim racing, flight sims and first-person shooters

About

Go Beyond the sounds in gaming, music, and movies - Introducing the Next Level Racing HF8- Haptic Feedback Gaming Pad. Feel the immersive haptic experience with the eight strategically placed vibration zones that are powerful and localized for precision. The Next Level Racing® HF8 is optimized for different simulation games* for a unique in-game experience. The HF8 suits all gaming chair, racing/flight seat styles, and bodies comfortably for the best user experience. The HF8 includes plug-and-play PC software to provide you a multi-channel experience without the need of additional sound cards or amplifiers.

*Localization and intensity of each motor can only be adjusted through PC use and HFS software. Console players do not require the HFS software as the eight motors will work collectively through the audio output.
 
Product Video see: https://youtu.be/J9PVxBIjRfw
 

Force2Motion 8DOF - Motion-Simulator - Built-to-Order "The Beast"

Important note: The product Next Level Racing Traction Plus was discontinued by the manufacturer at the beginning of February 2024 completely unexpectedly and without any prior notice.
We are working on obtaining remaining stocks so that we can still equip some of our "Beast"(s) with it. Therefore, these Traction Plus systems are only available in combination with our Beast or complete systems with adapters. Please contact us for specific delivery options. And don't wait too long before you decide to buy one of these Beasts. It will be many months before we have developed a replacement for the NLR Traction Plus system ourselves.
 
The ultimate combination of Seat-Mover and Full-Motion-Cockpit with Traction Loss

Attention: Do not be put off by the price shown! This bundle contains all possible options and combinations you can choose from. The actual price will be significantly lower after your selection in the shopping cart!
 
Our innovative Force2Motion 8DOF cockpit, exclusively manufactured in this combination, combines the GTTrack cockpit with Motion Platform V3 (Seat Mover) and the Traction Plus system (for oversteer and understeer effects) from Next Level Racing with the Cockpit Mover based on the ProSimu T1000 4M. As the "cream on top", a butt kicker is mounted, which transfers the vibrations from the engine, speed limiter and curb effects tactilely into the seat and thus onto the driver's body.
 
This turns the system into the ultimate racing and/or flying cockpit with 8 DOF. This product idea arose from the idea of putting together a complete cockpit with all conceivable options for our showroom in order to show our customers the respective effects of the individual motion systems on one system. After we had gained sufficient experience with the prototype, we completely redesigned the adapter system for combining the two worlds and had it manufactured in Germany. The adapter system is so modular that it is 100% compatible with the Next Level Racing Traction Plus system and can therefore be installed as an add-on between the GTTrack cockpit and Traction Plus. The adapter system can also be used to mount other cockpits than the GTTrack on the Next Level Racing Traction Plus system. For example, there is already an aluminium plate pre-drilled for RSeat RS1 and S1 cockpits, which can of course also be used for other cockpits and do-it-yourself projects by drilling appropriate holes.
 
Fast Facts:

• Cockpit with 4DOF plus Next Level Racing Motion Platform (Seat-Mover) with 2 DOF and Traction Plus (2 DOF)
• Up to 8 actuators plus Buttkicker
• NLR GTTrack cockpit with seat adjustment
• Racing seat (standard NLR - optional at extra charge ProSimu racing shell rigid)
• Safety belts
• Option: Force2Motion adapter systems (optionally with or without mounting plate for third-party cockpits)

Force2Motion Adapter-System RSeat-Edition S1 for NLR Traction Plus

With the Force2Motion adapter system RSeat-Edition it is possible to mount the Rseat S1 cockpit on the Traction Plus system.

Scope of delivery:

• 2x side member for static adapter in black fine structure (SF).
• 2x Cross member static in size R (for Rseat) in black fine structure (SF)
• 1x Cockpit support crosswise for S1 in black fine structure (SF)
• 2x spacer sleeves for cockpit on cross member
• 4x sealing plugs 80x80 in black
• All necessary screws
• German manual
• Without cockpit, Traction Plus System etc.
• Weight: approx. 15 kg

Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. Assembly requires manual skills and tools (ratchet set, Allen key, open-end spanner set, etc.). When assembling the system, make sure that the total load of all components including the driver does not exceed the maximum payload of the NLR Traction Plus System of 235 kg.

Force2Motion Adapter-System RSeat-Edition N1 for NLR Traction Plus

With the Force2Motion adapter system RSeat-Edition it is possible to mount the Rseat N1 cockpit on the Traction Plus system.

Scope of delivery:

• 2x side member for static adapter in black fine structure (SF).
• 2x Cross member static in size R (for Rseat) in black fine structure (SF)
• 4x sealing plugs 80x80 in black
• All necessary screws
• German manual
• Without cockpit, Traction Plus System etc.
• Weight: approx. 15 kg

Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. Assembly requires manual skills and tools (ratchet set, Allen key, open-end spanner set, etc.). When assembling the system, make sure that the total load of all components including the driver does not exceed the maximum payload of the NLR Traction Plus System of 235 kg.

Force2Motion Adapter-System RSeat-Edition RS1 for NLR Traction Plus

With the Force2Motion adapter system RSeat-Edition it is possible to mount the Rseat RS1 cockpit on the Traction Plus system.

Scope of delivery:

• 2x side member for static adapter in black fine structure (SF).
• 2x Cross member static in size R (for Rseat) in black fine structure (SF)
• 2x Cockpit support crosswise for S1 in black fine structure (SF)
• 4x sealing plugs 80x80 in black
• All necessary screws
• German manual
• Without cockpit, Traction Plus System etc.
• Weight: approx. 15 kg

Attention: This is not a toy and not a fully assembled product! The offered article is a kit for a motion cockpit. Assembly requires manual skills and tools (ratchet set, Allen key, open-end spanner set, etc.). When assembling the system, make sure that the total load of all components including the driver does not exceed the maximum payload of the NLR Traction Plus System of 235 kg.

Force2Motion Motion Platform Plus Adapter System - Base Support (bottom)

With the F2M adapter system Motion Platform Plus it is possible to mount one or two Motion Platform Plus on the Traction Plus. Depending on the rider's weight (75-100 kg) and the mounted cockpit, an additional V3 can then be inserted into the cockpit.
 
The system consists of a lower (mandatory) and upper (optional) carrier system. Depending on the cockpit used, the upper carrier may or may not be required. The lower carrier is called the basic set and contains the floor plates 150mm and two cross members with bracing plates for Traction-Plus mounting. These parts are not or only partially needed for the upper beam (extension set), as the Motion-Plus platforms are located at this point. The upper support can also be used on its own to extend the Wheel Stands DD and 2.0 with one or two Motion-Plus platforms and a V3 to a Motion Cockpit.

The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.

The basic carrier (below) is required for the following cockpits and motion platforms:

• NLR GT Elite Cockpit on Traction Plus (with Next Level Racing® GTElite Motion Adaptor Upgrade Kit).
• NLR FGT Elite Cockpit on Traction Plus
• NLR GTTrack Cockpit on Traction Plus
• NLR GTTrack Wheel Stand on Traction Plus (extension bracket required)
• NLR Wheel Stand DD on Traction Plus (extension carrier required)
• NLR Wheel Stand 2.0 on Traction Plus (extension carrier required)
• NLR FGT Cockpit on Traction Plus (extension carrier required)
• NLR FGT Cockpit on Traction Plus (only extension carrier required - you do need the base support (bootom) for this!)
• Custom-built cockpits and third-party cockpits with Motion Plus on Traction Plus (Please enquire and seek advice individually!).

Force2Motion adapter system Motion Platform Plus - extension carrier (top)

The upper frame (F2M adapter system Motion Platform Plus extension carrier) is used to accommodate the Wheel Stands of the NLR GTTrack Cockpit or the NLR Wheel Stand DD or the NLR Wheel Stand 2.0 and, together with a V3, to form the cockpit, which can then be equipped with one or two Motion Platform Plus. If this construct is to be mounted on a Traction Plus, you will also need the F2M base support.

And the upper frame can also (alone - without the lower carrier) "transport" the NLR FGT cockpit (with and without NLR seat) to a Motion Cockpit. Here you can integrate one or two Motion Platform Plus and operate the whole thing "solo" with the original floor supports from NLR. And you can even strap the system onto a Traction Plus system. Pretty crazy, but it works.

The complete description of the product including all possible combinations and the weight restrictions when using a Traction Plus system can be found in the following PDF.

The extension carrier (top) is needed for the following cockpits and motion platforms:

•  NLR GTTrack Wheel Stand on Traction Plus (base adapter required)
•  NLR Wheel Stand DD on Traction Plus (base adapter required)
•  NLR Wheel Stand DD without Traction Plus
•  NLR Wheel Stand 2.0 on Traction Plus (basic adapter required)
•  NLR Wheel Stand 2.0 without Traction Plus
•  NLR FGT Cockpit on Traction Plus (base adapter required)
•  NLR FGT Cockpit without Traction Plus

Next Level Racing ELITE Motion Adapter Frame for Motion Platform Plus

With the Next Level Racing ELITE Motion Adapter Frame for Motion Platform Plus it is possible to combine one or two Motion Platform Plus with the Next Level Racing® Flight or the FGT Elite Simulator Cockpit.

Fast Facts

• Designed to make the Next Level Racing® F-GT cockpit and Next Level Racing® Flight Simulators compatible with the Next Level Racing ®Motion Plus Platform or Traction Plus Platform.
• Constructed with premium black aluminum and Carbon Steel components for strength and rigidity.
• Can attach up to 2 Next Level Racing® Motion Platforms to the Motion Adaptor Frame

Attention: Please also note our own development for even more flexibility and compatibility: https://www.force2motion.de/en/force2motion-adapter-system-motion-platform-plus-basistraeger-unten.html

About

Introducing the Next Level Racing Motion Adaptor Frame - the ultimate solution to transform your F-GT or Flight Simulator cockpit into a Motion Plus or Traction Plus compatible setup. With the ability to choose from one to two Motion Plus options or one Traction Plus Platform configuration, this adaptor frame provides unparalleled flexibility to suit your immersive experience preferences. The solid construction of 4mm carbon steel and black anodized aluminum extrusion ensures durability and strength.

Possible configurations

Next Level Racing® F-GT Cockpit

• 1x Next Level Racing® Motion Plus Platform
• 2X Next Level Racing® Motion Plus Platform
• 1X Next Level Racing® Traction Plus Platform

 Next Level Racing Flight Simulators (Including Boeing Edition)

• 1x Next Level Racing® Motion Plus Platform
• 2X Next Level Racing® Motion Plus Platform
• 1X Next Level Racing® Traction Plus Platform

*Please note that using both platforms (Next Level Racing® Motion Plus Platform and Next Level Racing® Traction Plus Platform) simultaneously requires the addition of the Next Level Racing® Traction Adapter Frame.

Next Level Racing ELITE Traction Adapter Frame for Motion Platform Plus

With the Next Level Racing ELITE Traction Adapter Frame for Motion Platform Plus it is possible to combine one Motion Platform Plus with the Next Level Racing® Traction Plus System.

Fast Facts

• Designed to make the Next Level Racing® Motion Plus Platform compatible with the Next Level Racing ® Traction Plus Platform.
• Constructed with premium black anodized aluminum and carbon steel components for strength and rigidity.
• Can attach the Next Level Racing® Motion Plus Platform either to the front or the rear of the frame.

Attention: Please also note our own development for even more flexibility and compatibility: https://www.force2motion.de/en/force2motion-adapter-system-motion-platform-plus-basistraeger-unten.html

About

Introducing the Next Level Racing Traction Adaptor Frame - the ultimate solution to make your Next Level Racing Motion Plus Platform compatible with the Traction Plus Platform. This specially designed adaptor frame allows for a seamless and versatile setup, with the ability to attach the Motion Plus Platform either to the front or the rear of the frame. Constructed with premium black anodized aluminum and Carbon Steel components, this adaptor frame provides superior strength and rigidity for a safe and precise simulation experience.

 

F2M Adapter System Traction Plus for Aluminium Cockpits

With the F2M adapter system Traction Plus for aluminium cockpits it is possible to mount self-made cockpits or cockpits made of aluminium profiles on the Next Level Racing Traction Plus. IMPORTANT: The cockpits must have sufficient rigidity and stability so that they CANNOT bend in the middle when resting on the mounts of the Traction Plus system. The product consists of two adapters for the Traction Plus unit (front and rear identical) and a screw set. A cockpit or the Traction Plus System is not included.

Next Level Racing Motion Platform V3 incl. SDK - Bundle

Next Level Racing Motion Platform with SDK bundle (bound to serial number)

Detailed product information can be found on the manufacturer's website at http://www.nextlevelracing.com/sdk/

Attention: The software is explicitly assigned to the serial number of your Motion Platform V3. It is not possible to return the software after ordering (revocation). The Next Level Racing Traction+ is also supported. However, the V3 is always licensed and the SDK can only be used when the V3 is switched on. A single operation of the Traction Plus with the SDK is not possible.

RSeat S1 - Adapter Kit for Next Level Racing Motion Platform V3

Force2Motion adapter set for the installation of the Motion Platform in the RSeat S1 cockpit incl. lifter for wheel and pedal plate as well as for a shifter extension; With the Force2Motion adapters not only the Next Level Motion Platform is inserted into the S1 cockpit, but also the geometry of the seating position is adapted to the 8-10 cm higher seat surface. For this purpose, both the wheel mount and the shifter mount (analog flight mount) are raised by about 8-10 cm. The pedal plate is lifted by 4 cm. This virtually eliminates the higher seat height due to the Motion Platform mounted between the RSeat chassis and seat. The add-on parts are black anodized and of high quality. This means that neither the appearance nor the stability of the cockpit suffers, but the seat moves!

Scope of delivery

• Force2Motion adapter set for the installation of the Motion Platform in the RSeat S1 cockpit incl. shifter extension plate, lifter for wheel and pedal plate (RSeat S1 cockpit and NLR Motion Platform NOT included);

Force2Motion RSeat N1 Adapter for Next Level Racing Motion Platform V3

What’s Included

• Force2Motion adapter for installing the Motion Platform in the RSeat N1 cockpit (RSeat Cockpit and Motion Platform not included)
• Manual (GERMAN)
• Attention: Due to the approx. 8cm higher seating position, the optionally available RSeat Keyboard stand can not be used without restrictions (legroom or height is not sufficient)

Force2Motion Adapterset for Next Level Racing Motion Platform V3 in Fanatec Cockpit

What’s Included

• Force2Motion adapter for installing the Motion Platform in the Fanatec cockpit (Fanatec Cockpit and Next Level Racing® V3 Motion Platform not included)
• Force2Motion adapter for mounting Fanatec handbrake on Fanatec shifter when using Motion Platform (handbrake, shifter and Fanatec Clamp not included)
• Manual (German)

Fanatec Cockpit and Next Level Racing® V3 Motion Platform not included!

F2M Adapter Set V3 Motion Platform for Aluminium Cockpits

With the F2M-Adapter Motion Platform V3 for aluminium cockpits it is possible to mount the Next Level Racing Motion Platform V3 in an aluminium cockpit e.g. of Trak Racer type 80 and 160. With the 160 cockpit (160mm overall height), the longitudinal profiles of the seat mount are omitted. With the 80 cockpit these are used (to obtain the necessary height / airspace for the V3). With the 160 cockpit the seat position increases by approx. 2 cm compared to the original seat, with the 80 cockpit by approx. 10 cm. For an inside width in the aluminium cockpit of 500mm.

The set consists of two aluminium brackets in black fine structure powder-coated for the V3 with 4 clamping screws. The inside of the bracket is equipped with a sliding strip so that the surface of the aluminium profiles is protected when the V3 is moved longitudinally.

Attention: When installing, make sure that there is sufficient air space for the fans of the V3 (approx. 2 cm distance to the floor and rear wall) and that the seat and, if applicable, a mounted butt-kicker can move freely without bumping into fixed parts or producing a crushing hazard for the hands. If a static shifter mount is used in the seat's movement area, it must be shortened so that the seat can move freely in all directions (this can be supplied by Force2Motion on request - see corresponding article).

Please Note: Cockpit and V3 not included.

Next Level Racing Motion Platform SDK

Detailed product information can be found on the manufacturer's website at http://www.nextlevelracing.com/sdk/

Attention: The software is explicitly assigned to the serial number of your Motion Platform V3. It is not possible to return the software after ordering (revocation). The Next Level Racing Traction+ is also supported. However, the V3 is always licensed and the SDK can only be used when the V3 is switched on. A single operation of the Traction Plus with the SDK is not possible.

(Motion Platform not included)

Force2Motion GTTrack Pedallifter

After installing the Next Level Motion Platform V3 in the GTTrack cockpit, the pedal plate may be too low in relation to the seat height for some people. We have the solution for this: With the Force2Motion GTTrack Pedallifter the pedal plate is raised by 80mm. This completely compensates for the higher seat position. The pedal lifter is made of solid aluminium and is powder coated in matt black. Plastic end caps provide a clean look. Longer screws are included.
 

Next Level Racing Elite Motion Adaptor Upgrade Kit

Leading Features

1. Compatible with the Next Level Racing® Elite Series Cockpits, Motion Platform V3, and Traction Plus Platform 
2. Transforms the Elite cockpit into a motion compatible simulator* 
3. Constructed with premium Carbon Steel and Aluminium Extrusion
4. Finished with high quality powder coating and anodised aluminium parts
5. Pre-drilled and machined for streamline installation

About


The Next Level Racing® Elite Motion Adaptor Upgrade Kit is a sim racer’s step towards full immersion, making the Elite* cockpit compatible with the Next Level Racing® Motion V3 and Traction Plus Platform. A combination of precision CNC-machining and laser cutting manufacturing process, as well as anodised and powder coat finish, gives the Elite Motion Adaptor Upgrade Kit the same level of quality and rigidity as expected from our Elite range of simulation products. *Please check Motion Products to see if your cockpit requires the Elite Motion Adaptor Upgrade Kit as not all Elite cockpits require this add-on

Next Level Racing Traction Plus Bundle with FGT Elite - Wheel Plate Edition-Cockpit and Motion Platform V3

Breathtaking realism and performance, incredible¬ immersion and precision, superb technology, engineering and manufacturing…introducing the Next Level Racing® Traction Plus Motion Platform. And all in one package with the Motion Platform V3 and the brand new FGT Elite aluminimum cockpit.

The Traction Plus is truly a world class product designed to finally close that gap between the track/tarmac and simulation with a product and experience like no other motion simulator before it. The sliding concept and technology has only ever been seen before in the highest level professional race teams often with budgets in the hundreds of thousands of dollars or in many cases over million dollar budgets.

The Traction Plus was designed and developed in collaboration with a world class motion engineering team to deliver an unrivalled motion experience. To achieve the ultimate realism and precision this has required completely unique technology and engineering with a product designed from ground up over 4 years that includes over 2000 components. The platform has been designed and developed purely for simulation rather than just using commercial actuators and adapting to simulation. The Traction Plus is incredibly more than just a rear traction loss system and designed to combine with the V3 motion platform to provide a ground breaking motion simulator experience.
 

Motion-Systems Qubic System - Belt Tensioner BT1 - Multi-purpose, dual channel, direct drive seat belt tensioner

The Polish manufacturer Motion Systems, which has developed the "Qubic System" motion platforms and the V3 and Motion Platform Plus under licence for Next Level Racing, has now announced a new sensation: the Belt Tensioner QS-BT1.

And we are a little proud of this development ourselves, as Force2Motion was a driving force behind the development of this extension. With input from the racing and flightsim scene, we persistently fought for Motion Systems to build what we consider to be an indispensable extension for the Qubic systems. And now Motion Systems has introduced this product, which can also be fitted to many stand-alone cockpits without Motion. And of course it's a great extension for those who already have "everything". Well done, guys!

Now we have to be a little patient, because universally usable adapters still need to be developed for the system so that the Belt Tensioner can be fitted perfectly to a wide variety of seats and cockpits.

According to the latest information directly from the manufacturer, first available units are expected in Juni 2024. Pre-orders are possible from now on! We have ordered an initial production batch of 10 units.

More info and photos: https://qubicsystem.com/product/qs-bt1/# Please be sure to follow the instructions on installation (seat height, belt openings on the seats) etc.!

About:

Powered by the same technology as the stunning QS-220, the QS-BT1 is a multi-purpose dual channel direct drive seatbelt tightener that enhances immersion in racing simulations like no other device in its class and price range. It not only complements the force feedback of the direct drive steering wheels, but also enhances the overall experience of the already highly immersive QS motion platforms and can even be used as a standalone, independent device if required.

Simulation of braking, lateral acceleration, cornering at high speed, wheel lock and loss of traction are among the key features of QS-BT1. Asymmetric engine vibrations and road effects such as rumble strips are also available for games that support them. Although QS-BT1 was mainly developed for racing simulations, with its 200 N force per channel it can also be successfully used in flight simulators to give you the feeling of gigantic forces during high acceleration manoeuvres.

Scope of delivery:

• 1x two-channel seat belt tensioner
• 1x power supply unit
• 1x cable set
• 1x set of screws
• 1x universal bracket for aluminium profile

Optional accessories:

• Emergency stop switch (motion lock) - is not required if other Qubic systems are present, as the system can be controlled via an (existing) motion lock switch.

Note: For the use of seat movers (such as the NLR Motion Platform V3), the QS-BT1 can only be installed on the upper frame of the motion platform near the pivot point and reduces the permissible user weight. A multi-point harness is required and is not included in the scope of delivery.

 

Force2Motion seat adapter 345mm for Next Level Motion Platform V3 - For mounting race seats on the Next Level Racing Motion Platform V3

Suitable for common racing seats with 345mm hole spacing sideways and 270mm, 273mm and 320mm longitudinal spacing (e.g., Sparco R100, Sparco Pro 2000 Floormount, OMP, RaceRoom, etc.). The seat adapter is mounted between seat or seat rail (for longitudinal adjustment) and Next Level Racing Motion Platform V3 and converts to the lateral hole spacing of 355 mm of the Motion Platform. The adjustment of the seat adjustment thus remains fully intact. By the way: The seat adapter is already included in the Next Level Motion V3 RaceRoom Edition bundle!

Dimensions: 40mm x 30mm x 4mm x 340mm aluminum black powder coated; incl. 4 pcs. M8 countersunk head screws including stop nuts and assembly instructions.

Supplied without seat and seat adjustment slider!