ProSimu T1000 3M - Racing Simulator

ProSimu has been manufacturing motion simulators since 2009. ProSimu also manufactures high performance actuators dedicated to the training of Rally, GT, F1 drivers! These actuators are dedicated to automotive simulation and also to aeronautics.

The guys from ProSimu are pioneers in there field and they have created the T1000 3 Motion in 2015 with the integration of oversteer.

1 ) Oversteering has been part of the 3M T1000 DNA since its creation in 2015!

Why simulate oversteer?

Oversteer will allow you to feel the loss of grip, grip and mass transfer of your sports car.

Only a simulator equipped with oversteer can provide you with this valuable information which will allow you to correct your trajectory and gain tenths of a second at each lap! A direct drive steering wheel or a 4-cylinder simulator will not be able to give you this important information.

2) T1000 3M Version S as Super performance, Super precision thanks to PRS 50/200 actuators.

Only the ProSimu actuators: PRS 50 and PRS 200 will allow you to feel the road effect like a real driver and to have good haptic feedback from your vehicle AND the road (with its 100mm travel) as in real life.

Thanks to the ProSimu actuators PRS 50/PRS 200, feel an even more immersive " road effect ", with its 44 movements per second !

The jolts with each gear change as in real life and the intelligent vibrations thanks to the dedicated internal microprocessor!

And especially Impacts during braking and acceleration with its 200-280 mm/s and 1G or even 2G in acceleration !

The goal is to be as close as possible to reality thanks to the high performance actuators which are able to bring you closer to the behavior of a real vehicle. The specifications established with real pilots allowed ProSimu to establish these following specifications for the design of our actuators:

• No delay between the image and the movement of the simulator/actuator thanks to the ProSimu electronic card between the PC and the motors.
• A speed of up to 280mm/s and even more at peak: for braking impact and acceleration.
• Movements of up to 44 movements per second for vehicle and road vibration and haptic feedback .
• There is always the possibility of choosing actuators of
  • 100mm exclusive automotive simulation.
  • 150mm automotive and aircraft/space simulation.
  • 200mm simulation aircraft only.
  • You can choose actuators with large deflections and reduce it with our software
• Automotive simulation is the most performance demanding, our actuators adapt too very easily to aircraft simulation with softness and amplitude.

ProSimu listened to user request and made a quieter simulator.

But that's not all :

You now have the possibility of putting a slide under the seat and the choice of chassis: T1000 steel or T1000 Aluminium!

And there is even more::

• A system of captive feet
• Noise reduction for incredible silence,
• A single USB cable to control all actuators,
• Anti EMI shielded cables, a single BOX for all actuators.

All ProSimu simulators will now be equipped with actuators manufactured by PROSIMU PRS 50 & PRS 200, specially studied and designed 100% for automotive and aeronautical simulation.

* Decompression valve and eco-responsible!

Innovative Prosimu system with the dump valve.

In order to have an “impact” in acceleration and such performance, we use a decompression valve (dump valve) so as not to have overpressure or negative pressure inside the actuator!

This innovative principle is only available on the PRS 200 actuators! In addition, it allows you to use less engine power and to have an eco-responsible approach.

ProSimu is the only actuator manufacturers in the world to use a decompression valve to obtain these exceptional performances and to equip our simulators.
 

Specifications

• Double ProSimu PRS 50 front actuators, for a dynamic inclination of the chassis
• Traction loss system helping control the loss of grip / yaw
• Adjustable and tiltable pedal plate, for an optimal driving position
• Predrilled steering wheel plate with adjustable arm (Gearbox/HOTAS bracket sold separately)
• Extremely robust metal frame, especially designed for dynamic use

• Warranty: 2 years (professional use 1 year)
• Length: 160 cm
• Width: 120 cm
• Height: approx. 130 cm
• Weight: 100 kg
• Prosimu PRS50 actuators operating voltage. 110-230V
• PRS200™ operating voltage: 110-230V

What's included

• T1000™ Motion Platform
• Option: Cockpit (screws included) in steel or aluminium
• 3 actuators (stroke and type choice required)
• Controllers
• Cables
• With or without seat (choice required)
• SIMTOOLS license (PRS200™ actuators only)

Attention: This is not a toy and not a ready assembled product! The offered article is a DIY-kit for a motion cockpit. For the assembly manual skill and tools (among other things ratchet set, hexagon socket wrench, fork wrench set and socket wrench 22 or 24mm) are necessary. Actuators from the industrial control system are not designed for home use are. The electrical components may only be assembled and connected by suitably qualified personnel. Operation is at the user's own risk. Make sure that no small children or pets can get near the moving parts!
The set is explicitly ordered and preconfigured for you from the manufacturer. Therefore we cannot grant you any right of withdrawl for this article. Please let us advise you before the purchase!